5 Configure Library Features for STA
Configure specific library features to ensure the library sends high-quality SNMP data to STA. Perform the applicable tasks on each library you want STA to monitor.
The SL500, SL3000, and SL8500 libraries have a command line interface (CLI) and a graphical user interface, the StorageTek Library Console (SLC). The SL150 and SL4000 libraries uses a browser-based user interface exclusively. You will use these interfaces to perform the procedures in this chapter. Refer to the product's Library Guide as needed.
- Log In to the Library
- Verify the Library Firmware Version
- Verify the HBT Drive Controller Card Version (SL3000 and SL8500 only)
- Enable ADI on the Library (SL500, SL3000, SL8500)
- Ensure the Correct Library Complex ID (SL8500 only)
- Set the Drive Cleaning Warning (optional, SL3000 and SL8500 only)
- Set Volume Label Format
- Set Element Addressing Mode (SL150 only)
- Disable the SCSI FastLoad Option (SL500 only)
- Avoid Duplicate Volume Serial Numbers
- Configure STA to Support Dual TCP/IP or RE (SL3000 and SL8500 Only)
Supporting Documentation:
The following tape storage documentation can be found at: https://docs.oracle.com/en/storage/tape-storage/index.html