Load the Left Magazine in the Base Module

Load the left Base Module magazine first. It contains the reserved system slots.

The figure below shows the layout of the Base Module left magazine.

1. Optionally, populate the reserve slots with diagnostic and/or cleaning cartridges (see Determine the Required Number of Reserved System Slots). Place the diagnostic cartridge at the top (if using), followed by the cleaning cartridges. The following are all valid reserve slot configurations:
   
2. When inserting the cartridges into the magazine, orient the cartridge with the hub down and the label on the open side of the magazine. Gently push the cartridge into the slot until the plastic retention spring snaps into place.
3. If using host-managed drive cleaning, place one or two LTO universal cleaning cartridges in unreserved, data slots. Reserved slots are optional, so the following figure could represent a valid configuration for host-managed cleaning.
   
4. Load the remaining slots with data tapes.
5. Once loaded, reinstall the left magazine. Be careful to hold the magazine so that tapes do not fall out. Push the magazine into place until it latches with a click.