Lock the Robot

Lock the robot if removing or replacing the robot, moving the library, or preparing the library for shipment.

1. Perform a controlled power-down and make sure to select Prepare the Robot for removal before the library powers down (see Controlled Power-Down from the Interface). This parks the robot in a protective housing at the top of the library.
2. Locate the robot lock on the back of the Base Module. There are two robot lock types. Following the procedure for your lock type.
   • Lock the Knob-type Robot Lock (new version)
   • Lock the Thumbscrew-type Robot Lock (older version)
3. After locking, within the power-down dialog, select I have secured the Robot Lock in the locked position.