1. Library Guide
  2. Replace Components (CRUs & FRUs)
  3. Power Supply Removal and Replacement
  4. Replace the Power Supply

Replace the Power Supply

The power supply resides in a slot in the Base Module or Expansion Module.

  1. Remove the power supply filler, if necessary (see Remove the Power Supply Slot Cover).
  2. Remove the power supply from the shipping carton.
  3. Grasp the supply by the handle and support the bottom with your other hand.
  4. Orient the power supply as shown in Figure 10-2 (oriented with LEDs on left).
  5. Align the rear of the supply with the module slot. Push the supply fully into the module slot. Make sure the power supply is secured in the module slot.
  6. Connect the power cord to the power supply receptacle.
  7. Verify that the OK indicator is active on the power supply. If not, continue to Validate the Component Installation.