1. SCSI Reference Guide
  2. SCSI Commands
  3. Position to Element (2Bh)

Position to Element (2Bh)

Position to Element (2Bh) moves the robot to the destination element.

Note:

The Position to Element command (2Bh) is supported only for compatibility with existing applications. The library accepts this command for compatibility.

Description of slk_099.png follows
Description of the illustration slk_099.png
Transport Element Address

0000h = The element address of the robot.

Destination Element Address

The element address of the storage cell, mailslot cell, or drive. The robot positions the hand at this location.

Invert (not supported)

Set this to 0.