Oracle ZFS Storage ZS3-4 Rear Panel Components

The following graphic shows the rear panel of the Oracle ZFS Storage ZS3-4 controller. Base configuration HBAs are not depicted in this illustration.

For information about PCIe cards, see Oracle ZFS Storage ZS3-4 PCIe I/O Cards in Oracle ZFS Storage Appliance Customer Service Manual, Release OS8.8.x.


Graphic showing the components at the back of the controller

1 Power supply unit 0 status LEDs OK: green Power Supply Fail: amber AC OK: green

2 Power supply unit 0 AC inlet

3 Power supply unit 1 status LEDs OK: green Power Supply Fail: amber AC OK: green

4 Power supply unit 1 AC inlet

5 System status LEDs Power: green Attention: amber Locate: white

6 PCIe slots 0-4

7 Cluster card slot

8 Network (NET) 10/100/1000 ports: NET 0-NET 3

9 USB 2.0 ports

10 PCIe slots 5-9

11 Network management (NET MGT) 10/100 BASE-T Ethernet port

12 Serial management (SER MGT) port

13 DB-15 video connector

   

  • Ethernet Ports - Oracle ZFS Storage ZS3-4 has four RJ-45 Gigabit Ethernet connectors (NET 0, NET 1, NET 2, NET 3) located on the motherboard that operate at 10/100/1000 Mbit/sec. These network interfaces must be configured before use.

    Graphic showing the four Ethernet ports and labels

  • Network Management Port - The network management connector (NET MGT) is an RJ-45 10/100 BASE-T Ethernet port and provides a LAN interface to the SP console.

    Graphic showing the network management port

  • Serial Management Port - The serial management connector (SER MGT) is an RJ-45 connector and provides a terminal connection to the SP console.

    Graphic showing the serial management port

  • HBA Ports - The 4x4 SAS-2 HBA, installed in Oracle ZFS Storage ZS3-4, provides connectivity to external Oracle Storage Drive Enclosure DE2 and Sun Disk Shelves. The HBA logical ports are numbered 3-0, top to bottom:

    Graphic showing the four ports on the HBA