Oracle ZFS Storage ZS3-2 PCIe I/O Cards
Oracle ZFS Storage ZS3-2 PCIe I/O Options - The following table describes the supported PCIe configuration options for the Oracle ZFS Storage ZS3-2 controller. Slots 1 and 2 are reserved for internal and external HBAs, as shown in the following table. When adding PCIe cards, populate from higher order slots (6) first toward lower order slots.
Note:
Any empty PCIe slots must have a filler panel installed.Table 10-6 Oracle ZFS Storage ZS3-2 Controller PCIe Configuration Options
| Slot | Mfg Part Number | Description | Max | Note |
|---|---|---|---|---|
|
1 |
7047852 |
8-port SAS-2 internal HBA |
1 |
Base configuration |
|
2 |
7067091 |
4-port (4x4) SAS external HBA |
2 |
Base configuration |
|
3 |
7067091 |
4-port (4x4) SAS external HBA |
2 |
Second 4x4-port SAS external HBA |
|
3 |
7070195 |
4-port 1Gb Ethernet Copper UTP NIC |
4 |
Optional recommended front-end |
|
3 |
371-4325-02 |
2-port 8Gb FC HBA |
4 |
Optional FC target or initiator (backup) |
|
3 |
7023303 |
2-port 16Gb FC HBA |
4 |
Optional FC target or initiator (backup) |
|
3 |
375-3696-01 |
2-port InfiniBand CX2 HCA |
4 |
Optional recommended front-end |
|
3 |
7051223 |
2-port 10Gb Ethernet Optical NIC |
4 |
Optional recommended front-end |
|
3 |
7070006 |
2-port 10Gb Ethernet Copper Base-T NIC |
4 |
Optional recommended front-end |
|
4-6 |
7070195 |
4-port 1Gb Ethernet Copper UTP NIC |
4 |
Optional recommended front-end |
|
4-6 |
371-4325-02 |
2-port 8Gb FC HBA |
4 |
Optional FC target or initiator (backup) |
|
4-6 |
7023303 |
2-port 16Gb FC HBA |
4 |
Optional FC target or initiator (backup) |
|
4-6 |
375-3696-01 |
2-port InfiniBand CX2 HCA |
4 |
Optional recommended front-end |
|
4-6 |
7051223 |
2-port 10Gb Ethernet Optical NIC |
4 |
Optional recommended front-end |
|
4-6 |
7070006 |
2-port 10Gb Ethernet Copper Base-T NIC |
4 |
Optional recommended front-end |
Oracle ZFS Storage ZS3-2 NIC/HBA Options - The following table describes the NIC/HBA options for the Oracle ZFS Storage ZS3-2 controller.
Table 10-7 Oracle ZFS Storage ZS3-2 Controller NIC/HBA Options
| Mktg Part Number | Description |
|---|---|
|
SG-SAS6-INT-Z |
8-port 6Gb/s SAS-2 internal HBA |
|
SG-XPCIE2FC-QF8-Z |
2-port 8Gb FC HBA |
|
7103791 7110372 |
4-port (4x4) SAS-3 12 Gb/s external HBA 4-port (4x4) SAS-2 6Gb/s external HBA |
|
7101674 |
2-port 16Gb FC HBA |
|
X1109A-Z |
2-port 10GbE SFP+ NIC |
|
X4242A |
2-port InfiniBand CX2 HCA |
|
7100477 |
4-port 1Gb Ethernet Copper UTP NIC |
|
7100488 |
2-port 10Gb Ethernet Copper Base-T NIC |
|
X2129A |
XCVR 850NM, 1/10GPS, SFP, short reach |
|
X5562A-Z |
10GbE/1GbE SFP+ Transceiver, long reach |
Oracle ZFS Storage ZS3-2 PCIe Riser Configuration - The three risers are labeled Riser 1, Riser 2, and Riser 3. Though similar, the risers are not interchangeable. Riser 1 installs at the left rear of the chassis, Riser 2 at the center rear, and Riser 3 at the right rear of the chassis. Each riser can accommodate two PCIe cards:
-
Riser 1 contains slots 1 and 4
-
Riser 2 contains slots 2 and 5
-
Riser 3 contains slots 3 and 6