Oracle ZFS Storage ZS5-2 Internal Components
Oracle ZFS Storage ZS5-2 Storage, Power, and Fan Modules - The Oracle ZFS Storage ZS5-2 internal storage, power, and cooling components are described in the following figure and legend. The Oracle ZFS Storage ZS5-2 chassis contains both customer-replaceable units (CRUs) and field-replaceable units (FRUs) as shown in the following figure. FRUs must be replaced by trained Oracle service technicians.
|
1 Filter |
2 Drives (CRU) |
3 Chassis (FRU) |
|
4 LED board (FRU) |
5 Drive backplane data cable (FRU) |
6 SAS cables (FRU) |
|
7 Top cover |
8 Drive backplane power cable (FRU) |
9 Fan modules (CRU) |
|
10 Fan tray |
11 USB board (FRU) |
12 Power supplies (CRU) |
Oracle ZFS Storage ZS5-2 Memory, PCIe Cards, and System Battery - The Oracle ZFS Storage ZS5-2 memory, PCle cards, and system battery are described in the following figure and legend. These components are customer-replaceable units (CRUs) as shown in the following figure.
|
1 Drive cage (FRU) |
2 Drive backplane (FRU) |
3 Motherboard (FRU) |
|
4 DIMMs (CRU) |
5 Air duct |
6 PCIe cards (CRU) |
|
7 USB board (FRU) |
8 System battery (CRU) |
9 Power distribution board (FRU) |
|
10 PSU duct |
Oracle ZFS Storage ZS5-2 DIMM Configuration - The Oracle ZFS Storage ZS5-2 controller supports only fully populated DIMMs, 16 GB for 384 GB or 32 GB for 768 GB. Do not mix DIMM capacities; use either all 16 GB or 32 GB DIMMs.
In this illustration of the DIMM slots, the Oracle ILOM legacy targets for the DIMMs
are provided across the top, and the Oracle ILOM /System targets
for the DIMMs are provided across the bottom.
For example, the slot on the far left has the Oracle ILOM legacy target of
/SYS/MB/P1/D0. This same slot has the Oracle ILOM
/System target of
/System/Memory/DIMMs/DIMM_0.
|
1 /SYS/MB/P0/D(0-5) |
4 /SYS/MB/P1/D(6-11) |
|
2 /SYS/MB/P0/D(6-11) |
5 /System/Memory/DIMMs/DIMM_(0-11) |
|
3 /SYS/MB/P1/D(0-5) |
6 /System/Memory/DIMMs/DIMM_(12-23) |