WTCRemoteTuxDomMBean


Overview  |   Related MBeans  |   Attributes  |   Operations

Overview

This interface provides access to the WTC remote Tuxedo Domain configuration attributes. The methods defined herein are applicable for WTC configuration at the WLS domain level.

           
Since7.0.0.0
Security rolesThe following roles have read, write, and invoke permission for all non-encrypted attributes and operations in this MBean:
  • Deployer
Fully Qualified Interface NameIf you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.WTCRemoteTuxDomMBean
Factory Methods No factory methods. Instances of this MBean are created automatically.


Attributes

This section describes the following attributes:


AccessPoint

The unique name used to identify this remote Tuxedo access point. This name should be unique for all local and remote Tuxedo access points defined within a WTC Service. This allows you to define unique configurations having the same Access Point ID.

       
Privileges Read/Write
Typejava.lang.String
Default ValuemyRAP

AccessPointId

The connection principal name used to identify this remote Tuxedo access point when attempting to establish a session connection to local Tuxedo access points.

       
Privileges Read/Write
Typejava.lang.String
Default ValuemyRAPId

AclPolicy

The inbound access control list (ACL) policy toward requests from a remote Tuxedo access point.

The allowed values are:

Note: If Interoperate is set to Yes, AclPolicy is ignored.

       
Privileges Read/Write
Typejava.lang.String
Default ValueLOCAL
Legal Values
  • GLOBAL
  • LOCAL

AllowAnonymous

Specifies whether the anonymous user is allowed to access remote Tuxedo services.

Note: If the anonymous user is allowed to access Tuxedo, the default AppKey will be used for TpUsrFile and LDAP AppKey plug-ins. Interaction with the Custom AppKey plug-in depends on the design of the Custom AppKey generator.

       
Privileges Read/Write
Typeboolean

AppKey

Specifies the type of AppKey plug-in used.

The allowed values are:

       
Privileges Read/Write
Typejava.lang.String
Default ValueTpUsrFile
Legal Values
  • TpUsrFile
  • LDAP
  • Custom

CachingDisabled

Private property that disables caching in proxies.

       
Privileges Read only
Typeboolean
Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

CmpLimit

The compression threshold this remote Tuxedo access point uses when sending data to a local Tuxedo access point. Application buffers larger than this size are compressed.

Range of Values: Between 0 and a positive 32-bit integer.

       
Privileges Read/Write
Typeint
Default Value2147483647
Minimum value0
Maximum value2147483647

ConnectionPolicy

The conditions under which this remote Tuxedo access point establishes a session connection with a local Tuxedo access point.

The allowed values are:

       
Privileges Read/Write
Typejava.lang.String
Default ValueLOCAL
Legal Values
  • ON_DEMAND
  • ON_STARTUP
  • INCOMING_ONLY
  • LOCAL

ConnPrincipalName

The principal name used to verify the identity of this remote Tuxedo access point when it establishes a session connection with a local Tuxedo access point. If not specified, the connection principal name defaults to the AccessPointID for this access point.

Note: This parameter only applies to domains of type TDOMAIN that are running Oracle Tuxedo 7.1 or later software.

Note: ConnPrincipalName is not supported in this release.

       
Privileges Read/Write
Typejava.lang.String

CredentialPolicy

The outbound access control list (ACL) policy toward requests to a remote Tuxedo access point.

The allowed values are:

Note:If Interoperate is set to Yes, CredentialPolicy is ignored.

       
Privileges Read/Write
Typejava.lang.String
Default ValueLOCAL
Legal Values
  • GLOBAL
  • LOCAL

CustomAppKeyClass

The full pathname to the custom AppKey generator class. (This class is only relevant if you specify Custom as the AppKey Generator.)

Note: This class is loaded at runtime if the Custom AppKey generator plug-in is selected.

       
Privileges Read/Write
Typejava.lang.String

CustomAppKeyClassParam

The optional parameters to be used by the custom AppKey class at the class initialization time. This class is only relevant if you specify Custom as the AppKey Generator.)

       
Privileges Read/Write
Typejava.lang.String

DefaultAppKey

The default AppKey value to be used by the anonymous user and other users who are not defined in the user database if the plug-in allows them to access Tuxedo.

Note: The TpUsrFile and LDAP plug-ins do not allow users that are not defined in user database to access Tuxedo unless Allow Anonymous is enabled.

       
Privileges Read/Write
Typeint
Default Value-1

FederationName

The context at which this remote Tuxedo access point federates to a foreign name service. If omitted, the default federation point is tuxedo.domains.

       
Privileges Read/Write
Typejava.lang.String

FederationURL

The URL for a foreign name service that is federated into JNDI.

Note: The Weblogic Tuxedo Connector can federate to non-CORBA service providers.

Note: If this value is not specified, the WebLogic Tuxedo Connector:

       
Privileges Read/Write
Typejava.lang.String

KeepAlive

Return value tells whether this local Tuxedo access point is configured with Application Level Keep Alive, and it maximum idle time value before wait timer start ticking.

       
Privileges Read/Write
Typeint
Default Value0
Minimum value-1
Maximum value2147483647

KeepAliveWait

Return value that tells whether this local Tuxedo access point requires the acknowledgement of Application Level Keep Alive, and how long it will wait without receiving acknowledgement before declare the connection is inaccessible.

       
Privileges Read/Write
Typeint
Default Value0
Minimum value0
Maximum value2147483647

LocalAccessPoint

The local domain name from which this remote Tuxedo domain is reached.

       
Privileges Read/Write
Typejava.lang.String
Default ValuemyLAP

MaxEncryptBits

The maximum encryption key length (in bits) this remote Tuxedo access point uses when establishing a session connection. A value of 0 indicates no encryption is used.

Value Restrictions:

       
Privileges Read/Write
Typejava.lang.String
Default Value128
Legal Values
  • 0
  • 40
  • 56
  • 128

MaxRetries

The maximum number of times that this remote Tuxedo access point tries to establish a session connections to local Tuxedo access points. Use only when the ConnectionPolicy value is set to ON_STARTUP.

Note: A value of -1 indicates that the Max Retries value from the local Tuxedo access point is used. Be sure to set the ConnectionPolicy value for the local Tuxedo access point to ON_STARTUP also.

Range of Values: Between -1 and a positive 64-bit integer.

       
Privileges Read/Write
Typelong
Default Value-1
Minimum value-1
Maximum value9223372036854775807

MBeanInfo

Returns the MBean info for this MBean.

Deprecated.

       
Privileges Read only
Typejavax.management.MBeanInfo
Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

MinEncryptBits

The minimum encryption key length (in bits) this remote Tuxedo access point uses when establishing a session connection. A value of 0 indicates no encryption is used.

Value Restrictions:

       
Privileges Read/Write
Typejava.lang.String
Default Value0
Legal Values
  • 0
  • 40
  • 56
  • 128
Secure value40

Name

The user-specified name of this MBean instance.

This name is included as one of the key properties in the MBean's javax.management.ObjectName:
Name=user-specified-name

       
Privileges Read/Write
Typejava.lang.String

Notes

Optional information that you can include to describe this configuration.

WebLogic Server saves this note in the domain's configuration file (config.xml) as XML PCDATA. All left angle brackets (<) are converted to the XML entity &lt;. Carriage returns/line feeds are preserved.

Note:

If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.

       
Privileges Read/Write
Typejava.lang.String

NWAddr

The network address and port number of this remote Tuxedo access point.

Specify the address in one of the following formats:

Notes:        
Privileges Read/Write
Typejava.lang.String
Default Value//localhost:8902

ObjectName

Returns the ObjectName under which this MBean is registered in the MBean server.

Deprecated.

       
Privileges Read only
Typeweblogic.management.WebLogicObjectName
Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

Parent

Return the immediate parent for this MBean

       
Privileges Read/Write
Type

Registered

Returns false if the MBean represented by this object has been unregistered.

Deprecated.

       
Privileges Read only
Typeboolean
Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

RetryInterval

The number of seconds that this remote Tuxedo access point waits between automatic connection attempts to local Tuxedo access points. Use this only when the ConnectionPolicy value is set to ON_STARTUP.

Range of Values: Between -1 and a positive 32-bit integer.

Note: A value of -1 means that the RetryInterval value from the local Tuxedo access point is used. Be sure to set the ConnectionPolicy value for the local Tuxedo access point to ON_STARTUP also.

       
Privileges Read/Write
Typelong
Default Value-1
Minimum value-1
Maximum value2147483647

TpUsrFile

The full path to the user password file containing UID/GID information. (This field is only relevant if you specify TpUsrFile as the AppKey Generator.)

Note: This file is generated by the Tuxedo tpusradd utility on the remote Tuxedo domain specified by the remote Tuxedo access point. A copy of this file must be available in your WebLogic Tuxedo Connector environment to provide correct authorization, authentication, and auditing.

       
Privileges Read/Write
Typejava.lang.String

TuxedoGidKw

The keyword for Tuxedo GID (Group ID) used in the WlsUser when using the Tuxedo migration utility tpmigldap. This field is only relevant if you specify LDAP as the AppKey Generator.)

Note: The keyword is used to find Tuxedo GID in the user record in the embedded LDAP database.

       
Privileges Read/Write
Typejava.lang.String
Default ValueTUXEDO_GID

TuxedoUidKw

The keyword for Tuxedo UID (User ID) used in the WlsUser when using the Tuxedo migration utility tpmigldap. This keyword is only relevant if you specify LDAP as the AppKey Generator.)

Note: The keyword is used to find Tuxedo UID in the user record in the embedded LDAP database.

       
Privileges Read/Write
Typejava.lang.String
Default ValueTUXEDO_UID

Type

Returns the type of the MBean.

       
Privileges Read only
Typejava.lang.String
Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.


Operations

This section describes the following operations:


freezeCurrentValue

If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.

Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.

Note:

To insure that you are freezing the default value, invoke the restoreDefaultValue operation before you invoke this.

This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.

Deprecated. 9.0.0.0

   
Operation Name"freezeCurrentValue"
ParametersObject [] {  attributeName }

where:

  • attributeName is an object of type java.lang.String that specifies:

    attributeName

SignatureString [] { "java.lang.String" }
Returns void
Exceptions
  • javax.management.AttributeNotFoundException
  • javax.management.MBeanException

isSet

Returns true if the specified attribute has been set explicitly in this MBean instance.

   
Operation Name"isSet"
ParametersObject [] {  propertyName }

where:

  • propertyName is an object of type java.lang.String that specifies:

    property to check

SignatureString [] { "java.lang.String" }
Returns boolean

restoreDefaultValue

If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.

Default values are subject to change if you update to a newer release of WebLogic Server. To prevent the value from changing if you update to a newer release, invoke the freezeCurrentValue operation.

This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.

Deprecated. 9.0.0.0

   
Operation Name"restoreDefaultValue"
ParametersObject [] {  attributeName }

where:

  • attributeName is an object of type java.lang.String that specifies:

    attributeName

SignatureString [] { "java.lang.String" }
Returns void
Exceptions
  • javax.management.AttributeNotFoundException

unSet

Restore the given property to its default value.

   
Operation Name"unSet"
ParametersObject [] {  propertyName }

where:

  • propertyName is an object of type java.lang.String that specifies:

    property to restore

SignatureString [] { "java.lang.String" }
Returns void