This interface provides access to the WTC tBridge Redirect configuration attributes. The methods defined herein are applicable for tBridge configuration at the WLS domain level.
| Since | 7.0.0.0 | ||
| Security roles | The following roles have read, write, and invoke permission for all non-encrypted attributes and operations in this MBean:
|
||
| Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:weblogic.management.configuration.WTCtBridgeRedirectMBean
|
||
| Factory Methods | |||
| Additional Access Points |
In addition to accessing this MBean by invoking a factory method, you can also access this MBean from the following MBean attributes:
|
This section describes the following attributes:
Private property that disables caching in proxies.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The direction of data flow. At least one redirection must be specified or the Tuxedo queuing bridge will fail to start and an error will be logged.
Each defined direction is handled by starting a new thread.
Redirection keywords:
JmsQ2TuxQ
- From JMS to TUXEDO /Q
TuxQ2JmsQ
- From TUXEDO /Q to JMS
JmsQ2TuxS
- From JMS to TUXEDO Service reply to JMS
JmsQ2JmsQ
- From JMS to JMS
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | JmsQ2TuxQ |
| Legal Values |
|
Return whether the MBean was created dynamically or is persisted to config.xml
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
| Privileges | Read only |
| Type | long |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the MBean info for this MBean.
Deprecated.
| Privileges | Read only |
| Type | javax.management.MBeanInfo |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The name of the metadata file URL used to pass the call to the XML-to-non-XML WebLogic XML Translator (WLXT).
Note: Not supported for this release.
| Privileges | Read/Write |
| Type | java.lang.String |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName:
Name=user-specified-name
| Privileges | Read/Write |
| Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<. Carriage returns/line feeds are
preserved.
If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
| Privileges | Read/Write |
| Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
| Privileges | Read only |
| Type | weblogic.management.WebLogicObjectName |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
| Privileges | Read/Write |
| Type |
Returns false if the MBean represented by this object has been unregistered.
Deprecated.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The name of the JMS queue used specifically for synchronous calls to a Tuxedo service. The response is returned to the JMS ReplyQ.
| Privileges | Read/Write |
| Type | java.lang.String |
The name of the local or remote access point where the source is located.
| Privileges | Read/Write |
| Type | java.lang.String |
The name of a source queue or service. Specifies a JMS queue name, a Tuxedo queue name, or the name of a Tuxedo service.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | mySource |
The name of the Qspace for a source location.
| Privileges | Read/Write |
| Type | java.lang.String |
The name of the local or remote access point where the target is located.
| Privileges | Read/Write |
| Type | java.lang.String |
The name of the target queue or service. Specifies a JMS queue name, a Tuxedo queue name, or the name of a Tuxedo service.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | myTarget |
The name of the Qspace for a target location.
| Privileges | Read/Write |
| Type | java.lang.String |
The type of XML/FML translation.
NO indicates that no data translation is performed.
FLAT indicates that the message payload is transformed
using the WebLogic Tuxedo Connector translator. WLXT
indicates that translation is performed by the XML-to-non-XML
WebLogic XML Translator (WLXT).
Note: WLXT is not supported for this release.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | NO |
| Legal Values |
|
Returns the type of the MBean.
| Privileges | Read only |
| Type | java.lang.String |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
To insure that you are freezing the default value, invoke the
restoreDefaultValue operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
| Operation Name | "freezeCurrentValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
| Operation Name | "getInheritedProperties" |
| Parameters | Object [] { propertyNames }
where:
|
| Signature | String [] {
"[Ljava.lang.String;" } |
| Returns |
class |
Check if the value of a property is inherited from template mbean or not.
| Operation Name | "isInherited" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
| Operation Name | "isSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
| Operation Name | "restoreDefaultValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
Restore the given property to its default value.
| Operation Name | "unSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|