2 Oracle Traffic Director WLST Commands

This chapter lists and describes the WebLogic Scripting Tool (WLST) commands and their options for Oracle Traffic Director in alphabetical order.

activate

Description

Activates changes saved during the current editing session but not yet deployed. This command prints a message if a server restart is required for the changes that are being activated.

The activate command returns the latest ActivationTask MBean which reflects the state of changes that a user is currently making or has made recently. You can then invoke methods to get information about the latest Configuration Manager activate task in progress or just completed. In the event of an error, the command returns a WLSTException.

Use this command to deploy the configuration changes to the instances. Note that this command will deploy only the changes done after starting an edit session by executing the command startEdit. Also, the effect of this command is not limited to Oracle Traffic Director. All the changes done after starting an edit session to the various other components and managed servers will also be deployed.

Syntax

activate([timeout], [block])

Argument Definition

Argument	Definition
timeout	Optional. Time (in milliseconds) that WLST waits for the activation of configuration changes to complete before canceling the operation. A value of -1 indicates that the operation will not time out. This argument defaults to 300,000 ms (or 5 minutes).
block	Optional. Boolean value specifying whether WLST should block user interaction until the command completes. This argument defaults to `false`, indicating that user interaction is not blocked. In this case, WLST returns control to the user after issuing the command and assigns the task MBean associated with the current task to a variable that you can use to check its status.If you are importing WLST as a Jython module, as described in "Importing WLST as a Jython Module" in Oracle WebLogic Scripting Tool, `block` is always set to `true`.

timeout

Optional. Time (in milliseconds) that WLST waits for the activation of configuration changes to complete before canceling the operation. A value of -1 indicates that the operation will not time out. This argument defaults to 300,000 ms (or 5 minutes).

block

Optional. Boolean value specifying whether WLST should block user interaction until the command completes. This argument defaults to false, indicating that user interaction is not blocked. In this case, WLST returns control to the user after issuing the command and assigns the task MBean associated with the current task to a variable that you can use to check its status.If you are importing WLST as a Jython module, as described in "Importing WLST as a Jython Module" in Oracle WebLogic Scripting Tool, block is always set to true.

Example

The following example activates the changes made during the current edit session that have been saved to disk, but that have not yet been activated. WLST waits for 100,000 ms for the activation to complete, and 200,000 ms before the activation is stopped.

wls:/mydomain/edit !> activate(200000, block='true') 
Activating all your changes, this may take a while ... 
The edit lock associated with this edit session is released once the activation is completed.
Action completed.
wls:/mydomain/edit>

deleteKeyStoreEntry

Description

Deletes a certificate or trusted certificate from the keystore using its alias. Refer to Security Custom WLST Commands for more information.

Syntax

deleteKeyStoreEntry(appStripe='stripe', name='keystore', 
password='password', alias='alias', keypassword='keypassword')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
alias	Specifies the alias of the entry to be deleted.
keypassword	Specifies the key password of the entry to be deleted.

Example

This example deletes a keystore entry denoted by alias mycert.

svc = getOpssService("KeyStoreService")
svc.deleteKeyStoreEntry(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='')

displayLogs

Description

Use this command to view the contents of Oracle Traffic Director log files, the access log, tcp access log and error log. The access log records information about requests to and responses from the server.

The command returns a value only when the returnData option is set to true. By default it will not return any data. The return value depends on the option used.

Syntax

displayLogs([searchString,][options])

Argument	Definition
searchString	An optional search string. Only messages that contain the given string (case-insensitive) will be returned. Note that the displayLogs command can read logs in multiple formats and it converts the messages to ODL format. The search will be performed in the native format, if possible. Otherwise, it may be performed in the message contents, and it may exclude mark-up. Therefore you should avoid using mark-up characters in the search string.
target	Optional. The name of a WebLogic Server instance, or a system component. For a system component, the syntax for the target is: sc:component-name In connected mode, the default target is the WebLogic domain. In disconnected mode, there is no default; the target option is required.
oracleInstance	Optional. Defines the path to the ORACLE_INSTANCE or WebLogic domain home. The command is executed in disconnected mode when you use this parameter.
log	Optional. A log file path. The command will read messages from the given log file. If the log file path is not given, the command will read all logs associated with the given target.
last	Optional. An integer value. Restricts the search to messages logged within the last minutes. The value can have a suffix `s` (second), `m` (minute), `h` (hour), or `d` (day) to specify a different time unit. (For example, last='2h' will be interpreted as the last 2 hours).
tail	Optional. An integer value. Restrict the search to the last n messages from each log file and limits the number of messages displayed to n.
pattern	Optional. A regular expression pattern. Only messages that contain the given pattern are returned. Using the pattern option is similar to using the searchString argument, except that you can use a regular expression. The regular expression pattern search is case sensitive (unless you explicitly turn on case-insensitive flags in the pattern). The pattern must follow java.util.regex syntax.
ecid	Optional. A string or string sequence containing one or more Execution Context ID (ECID) values to be used as a filter for log messages.
component	Optional. A string or string sequence containing one or more component ID values to be used as a filter for log messages.
module	Optional. A string or string sequence containing one or more module ID values to be used as a filter for log messages.
type	Optional. A string or string sequence containing one or more message type values to be used as a filter for log messages.
app	Optional. A string or string sequence containing one or more application values to be used as a filter for log messages.
query	Optional. A string that specifies an expression used to filter the contents of log messages. A simple expression has the form: field-name operator value where field-name is a log record field name and operator is an appropriate operator for the field type (for example, you can specify equals, startsWith, contains or matches for string fields). A field name is either one of the standard ODL attribute names (such as COMPONENT_ID, MSG_TYPE, MSG_TEXT, and SUPPL_DETAIL), or the name of a supplemental attribute (application specific), prefixed by SUPPL_ATTR. (For example, SUPPL_ATTR.myAttribute). A few common supplemental attributes can be used without the prefix. For example, you can use `APP` to filter by application name. You can combine multiple simple expressions using the boolean operators `and`, `or` and `not` to create complex expressions, and you can use parenthesis for grouping expressions. See Administering Oracle Fusion Middleware for a detailed description of the query syntax.
groupBy	Optional. A string list. When the groupBy option is used, the output is a count of log messages, grouped by the attributes defined in the string list.
orderBy	Optional. A string list that defines the sort order for the result. The values are log message attribute names. The name may be extended with an optional suffix `:asc` or `:desc` to specify ascending or descending sorting. The default sort order is ascending. By default, the result is sorted by time.
returnData	Optional. A Jython boolean value (0 or 1). If the value is true the command will return data (for example, to be used in a script). The default value is false, which means that the command only displays the data but does not return any data.
format	Optional. A string defined the output format. Valid values are ODL-Text, ODL-XML, ODL-complete and simple. The default format is ODL-Text.
exportFile	Optional. The name of a file to where the command output is written. By default, the output is written to standard output.
follow (f)	Optional. Puts the command in "follow" mode so that it continues to read the logs and display messages as new messages are added to the logs (similar to the UNIX `tail -f` command). The command will not return when the `f` option is used. This option is currently not supported with system components.

Example

displayLogs(target="sc:otd_test_varunam.in.example.com")

displayMetricTables

Description

This WLST command can be used to display runtime statistics about a server instance.

Syntax

displayMetricTables([metricTable_1] [, metricTable_2], [...] [, servers] [, variables])

Argument	Definition
metricTable_n	Optional. Specifies a list of metric tables. By default, this argument displays all available metrics. The metric table name can contain special characters for simple pattern matching. The character '?' matches any single character. The character '*' matches zero or more characters. You specify the metric table name. You can specify multiple metric table names in a comma-separated list. These are the same names output by the WLST command displayMetricTableNames.
servers	Optional. Specifies the servers from which to retrieve metrics. Valid values are a list of WebLogic Server instance names and system component names. To specify one server, use the following syntax: servers='servername' To specify multiple servers, use one of the following syntax options: servers=['servername1', 'servername2', ...] servers=('servername1', 'servername2', ...) If this argument is not specified, the command returns the list of metric tables for all WebLogic servers and system components. For system components, such as Oracle HTTP Server, use the following format: servers=['component_name], servertype='component_type')
variables	Optional. Defines the metric aggregation parameters. Valid values are a set of name-value pairs. It uses the following syntax: variables={name1:value1, name2:value2, ...} The specific name-value pairs depend on the aggregated metric tables. Each aggregated metric table has its specific set of variable names.

Argument

Definition

metricTable_n

Optional. Specifies a list of metric tables. By default, this argument displays all available metrics. The metric table name can contain special characters for simple pattern matching. The character '?' matches any single character. The character '*' matches zero or more characters.

You specify the metric table name. You can specify multiple metric table names in a comma-separated list.

These are the same names output by the WLST command displayMetricTableNames.

servers

Optional. Specifies the servers from which to retrieve metrics. Valid values are a list of WebLogic Server instance names and system component names.

To specify one server, use the following syntax:

servers='servername'

To specify multiple servers, use one of the following syntax options:

servers=['servername1', 'servername2', ...]
servers=('servername1', 'servername2', ...)

If this argument is not specified, the command returns the list of metric tables for all WebLogic servers and system components.

For system components, such as Oracle HTTP Server, use the following format:

servers=['component_name], servertype='component_type')

variables

Optional. Defines the metric aggregation parameters. Valid values are a set of name-value pairs. It uses the following syntax:

variables={name1:value1, name2:value2, ...}

The specific name-value pairs depend on the aggregated metric tables. Each aggregated metric table has its specific set of variable names.

Example

Note that at least a single Oracle Traffic Director instance needs to be running for the following examples to work correctly.

# View metrics for all OTD instances
displayMetricTables('OTD_*')
 
# View origin server metrics for all instances
displayMetricTables('OTD_OriginServer')
 
# Get list of metric tables for a specific instance
displayMetricTableNames(servers='/OTD/otd_test_myserver.example.com')
 
# View all metrics for a specific instance
displayMetricTables(servers='/OTD/otd_test_myserver.example.com')
 
# View instance metrics for a specific instance
displayMetricTables('OTD_Instance', servers='/OTD/otd_test_myserver.example.com')

enableOverwriteComponentChanges

Description

Executing this command before activate lets the activate call overwrite the local configuration file modifications on instances with their corresponding server versions.

An activate call would fail if there are any local configuration file modifications on the instance. In such a case, you would want to either discard the changes on the instance or pull the changes from the instance to the config store by executing pullComponentChanges. In either case, you should execute the command enableOverwriteComponentChanges before activate such that the activate call would not fail because of the local modifications on the instance.

Note:

This command can only be executed from an open edit session. See resync/resyncAll for overriding instance changes outside of an open edit session.

Syntax

enableOverwriteComponentChanges()

Example

props={'configuration': 'test', 'name': 'var_foo', 'value': 'bar'}
otd_createVariable(props)
 
activate()
weblogic.management.provider.UpdateException: [Management:141191]The prepare phase of the configuration update failed with an exception.
Caused by: weblogic.nodemanager.NMException: Received error message from Node Manager Server:
[ChangeList validation failed for transaction '3033897627106602' with cause:
OTD-67807 Validation failed for instance 'otd_test.example.com':
The instance configuration has been locally modified. The following changes can either be discarded on the next activate using 'enableOverwriteComponentChanges' or pulled into the current configuration using 'pullComponentChanges'.
Modified files: config/server.xml,config/test-obj.conf,config/obj.conf
 
# Scenario 1: Pull the changes on instance to config store and call enableOverwriteComponentChanges and activate.
 
showComponentChanges("otd_test.example.com")
component otd_test.example.com changes on machine example.com:
edit OTD/test/config/obj.conf 2014.12.01-16:20:50 1970.01.01-05:29:59
edit OTD/test/config/test-obj.conf 2014.12.01-16:20:50 1970.01.01-05:29:59
edit OTD/test/config/server.xml 2014.12.01-16:50:27 2014.12.01-16:49:44
 
pullComponentChanges("otd_test.example.com")
pull component otd_test.example.com changes on machine in.example.com:
edit OTD/test/config/obj.conf
edit OTD/test/config/test-obj.conf
edit OTD/test/config/server.xml
 
enableOverwriteComponentChanges()
activate()
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released once the activation is completed.
Activation completed
 
# Scenario 2: Discard the changes on the instance and override them with changes from the current edit session
 
showComponentChanges("otd_test.example.com")
component otd_test.example.com changes on machine example.com:
edit OTD/test/config/obj.conf 2014.12.01-16:55:29 1970.01.01-05:29:59
edit OTD/test/config/test-obj.conf 2014.12.01-16:55:29 1970.01.01-05:29:59
edit OTD/test/config/server.xml 2014.12.01-16:55:29 2014.12.01-16:58:23
 
enableOverwriteComponentChanges()
activate()
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed.
Activation completed

exportKeyStoreCertificate

Description

Exports a certificate, trusted certificate or certificate chain. Refer to Security Custom WLST Commands for more information.

Syntax

exportKeyStoreCertificate(appStripe='stripe', name='keystore',password='password', alias='alias', keypassword='keypassword', type='entrytype',filepath='absolute_file_path')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
alias	Specifies the alias of the entry to be exported
keypassword	Specifies the key password.
type	Specifies the type of keystore entry to be exported. Valid values are 'Certificate', 'TrustedCertificate' or 'CertificateChain'.
filepath	Specifies the absolute path of the file where certificate, trusted certificate or certificate chain is exported.

Example

svc = getOpssService("KeyStoreService")
svc.exportKeyStoreCertificate(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', type='Certificate', filepath='/scratch/cert.txt')

exportKeyStoreCertificateRequest

Description

Generate a certificate signing request for a key pair and saves it to a file. Refer to Security Custom WLST Commands for more information. This Base64-encoded certificate request can be submitted to a third-party Certificate Authority (CA) which will verify the sender, sign and return the signed certificate.

Syntax

exportKeyStoreCertificateRequest(appStripe='stripe', name='keystore', password='password', alias='alias', keypassword='keypassword', filepath='absolute_file_path')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
alias	Specifies the entry's alias name.
keypassword	Specifies the key password.
filepath	Specifies the absolute path of the file where certificate request is exported.

Example

svc = getOpssService("KeyStoreService")
 
# generate a key pair with the proper DN
svc.generateKeyPair(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', dn='CN=test.example.com, OU=Webtier, O=\'Company Name\', ST=California, C=US', keysize='1024')
 
# generate the CSR and put it in to a text file
svc.exportKeyStoreCertificateRequest(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', filepath='/scratch/certreq.crt')

generateKeyPair

Description

Use this command to generate a key pair in a keystore and wrap it in a demo CA-signed certificate. Refer to Security Custom WLST Commands for more information. This command is the equivalent of creating a self-signed certificate in Release 11g. You can use this key pair to generate a certificate signing request (CSR) using exportKeyStoreCertificateRequest which you can submit to a third-party Certificate Authority (CA) for signing.

Syntax

generateKeyPair(appStripe='stripe', name='keystore', password='password', 
dn='distinguishedname', keysize='keysize', alias='alias', 
keypassword='keypassword')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
dn	Specifies the distinguished name of the certificate wrapping the key pair.
keysize	Specifies the key size.
alias	Specifies the alias of the key pair entry.
keypassword	Specifies the key password.

Example

svc = getOpssService("KeyStoreService")
svc.generateKeyPair(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', dn='CN=test.example.com, OU=Webtier, O=\'Company Name\', ST=California, C=US', keysize='1024')

getKeyStoreCertificates

Description

Use this command to view the certificate properties including subject, issuer, issue date, and expiry date. Refer to Security Custom WLST Commands for more information.

Syntax

getKeyStoreCertificates(appStripe='stripe', name='keystore', 
password='password', alias='alias', keypassword='keypassword')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
alias	Specifies the alias of the certificate, trusted certificate or certificate chain to be displayed.
keypassword	Specifies the key password.

Example

svc = getOpssService("KeyStoreService")
svc.getKeyStoreCertificates(appStripe='OTD', name='myconfig', password='', alias='mycert')

help

Description

Lists all available Oracle Traffic Director custom WLST commands, or lists help for a particular command.

Syntax

To list all available Oracle Traffic Director custom WLST commands:

help('otd')

To list help for a particular command:

help('<otd_custom_command>')

Example

help('otd_createConfiguration')

importKeyStoreCertificate

Description

Imports a CA signed or trusted certificate into the keystore. Refer to Security Custom WLST Commands for more information.

Once a CSR is submitted to a CA for signing, the CA signs the request and typically sends the certificate as a Base-64 encoded string. You should import this certificate as type CertificateChain along with any Intermediate and Root CA certificates using the same alias as that of the key pair that was used to generate the certificate request.

Once you have downloaded your certificate from your CA, you can download any Intermediate and Root certificates from your CA's website, open a text editor and paste the entire body of each certificate into one text file in the following order: Primary Certificate > Intermediate Certificate > Root Certificate.

The file should appear as follows when finished:

-----BEGIN CERTIFICATE-----
(Server SSL certificate)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Intermediate certificate)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Root certificate)
-----END CERTIFICATE-----

Syntax

importKeyStoreCertificate(appStripe='stripe', name='keystore', 
password='password', alias='alias', keypassword='keypassword', 
type='entrytype',filepath='absolute_file_path')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
alias	Specifies the alias of the entry to be imported.
keypassword	Specifies the key password of the newly imported entry.
type	Specifies the type of keystore entry to be imported. Valid values are 'Certificate', 'TrustedCertificate' or 'CertificateChain'.
filepath	Specifies the absolute path of the file from where certificate, trusted certificate or certificate chain is imported.

Example

svc = getOpssService("KeyStoreService")
 
# generate a key pair with the proper DN
svc.generateKeyPair(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', dn='CN=test.example.com, OU=Webtier, O=\'Company Name\', ST=California, C=US', keysize='1024')
 
# generate the CSR and put it in to a text file
svc.exportKeyStoreCertificateRequest(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', filepath='/scratch/certreq.crt')
 
# Submit the CSR to a CA who can sign the certificate and import signed cert into # the keystore using the same alias as the key pair. Note that the file being     # imported should contain the CA cert along with the server cert and should be
# imported as type 'CertificateChain'
svc.importKeyStoreCertificate(appStripe='OTD', name='myconfig', password='', alias='mycert', keypassword='', type='CertificateChain', filepath='/scratch/certsign.pem')
 
# Any CA cert can be imported into the keystore as a trusted cert
svc.importKeyStoreCertificate(appStripe='OTD', name='myconfig', password='', alias='ca-cert', keypassword='', type='TrustedCertificate', filepath='/scratch/cacert.crt')

listExpiringCertificates

Description

List certificates expiring in a specified period. Refer to Security Custom WLST Commands for more information.

Syntax

listExpiringCertificates(days='days', autorenew=true|false)

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
days	Specifies that the list should only include certificates within this many days from expiration.
autorenew	Specifies true for automatically renewing expiring certificates, false for only listing them.

Example

svc = getOpssService("KeyStoreService")
svc.listExpiringCertificates(days='365', autorenew=false)

listKeyStores

Description

List all the keystores in a stripe. Refer to Security Custom WLST Commands for more information. In the case of Oracle Traffic Director, a permission-protected keystore is created at the same time as the configuration and also has the same name as the configuration. Hence the keystore names returned by listKeyStores will typically match the configuration names.

Syntax

 listKeyStores(appStripe='stripe')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe whose keystores are listed.

Example

svc = getOpssService("KeyStoreService")
svc.listKeyStores(appStripe='OTD')

listKeyStoreAliases

Description

List aliases in a keystore. Refer to Security Custom WLST Commands for more information. Any certificate that is generated or imported into the keystore will be listed by its alias.

Syntax

listKeyStoreAliases(appStripe='stripe', name='keystore', password='password', type='entrytype')

Argument	Definition
svc	Specifies the service command object obtained through a call to getOpssService().
appStripe	Specifies the name of the stripe where the keystore resides.
name	Specifies the name of the keystore.
password	Specifies the keystore password.
type	Specifies the type of entry for which aliases are listed. Valid values are 'Certificate', 'TrustedCertificate', 'SecretKey' or '*'.

Example

svc = getOpssService("KeyStoreService")
 
# List all certificates
svc.listKeyStoreAliases(appStripe='OTD', name='myconfig', password='', type='*')
 
# List all user certificates (both SSL server and client)
svc.listKeyStoreAliases(appStripe='OTD', name='myconfig', password='', type='Certificate')
 
# List only Trusted CA certificates
svc.listKeyStoreAliases(appStripe='OTD', name='myconfig', password='', type='TrustedCertificate')

otd_blockProxyInfo

Description

Use this command to block the generation and forwarding of a particular proxy parameter to the origin server. The information about the proxy parameters and headers is described in otd_forwardProxyInfo.

Note:

If the incoming request contains any of the headers corresponding to the proxy parameters, Oracle Traffic Director will pass-through the incoming request containing this header to the origin server.

Syntax

otd_blockProxyInfo(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.
param	Name of the proxy parameter to be blocked. Range of values: jroute, via, ip, cipher, proxy-agent, keysize, secret-keysize, ssl-id, issuer-dn, user-dn, auth-cert, xforwarded-for, cache-info, ssl.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['param'] = 'ssl'
otd_blockProxyInfo(props)

otd_copyConfiguration

Description

Use this command to create a copy of an existing configuration.

Syntax

otd_copyConfiguration(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
source-configuration	Name of the configuration to be copied.	Mandatory.
dest-configuration	Name of the new configuration. Name should not contain spaces, invalid characters or non-ASCII characters.	Mandatory.

Example

props = {}
props['source-configuration'] = 'foo'
props['dest-configuration'] = 'bar'
otd_copyConfiguration(props)

otd_copyVirtualServer

Description

Use this command to create a copy of an existing virtual server.

Syntax

otd_copyVirtualServer(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
source-virtual-server	Name of the virtual server to be copied.	Mandatory.
dest-virtual-server	Name of the new virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['source-virtual-server'] = 'bar'
props['dest-virtual-server'] = 'baz'
otd_copyVirtualServer(props)

otd_createCacheRule

Description

Use this command to create a cache rule with a set of initial values.

Syntax

otd_createCacheRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
cache-rule	Name of the cache rule to be created.	Mandatory.
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['cache-rule'] = 'cache-rule-1'
otd_createCacheRule(props)

otd_createCompressionRule

Description

Use this command to create a compression rule with an initial set of values.

Syntax

otd_createCompressionRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
compression-rule	Name of the compression rule to be created.	Mandatory.
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['compression-rule'] = 'compression-rule-1'
otd_createCompressionRule(props)

otd_createConfiguration

Description

Use this command to create a new configuration that listens to HTTP and TCP traffic on a given port and front-ends a set of HTTP and TCP origin servers. The command creates a default virtual server that handles HTTP traffic and a default TCP proxy that handles TCP traffic. In addition, it creates a default route and forwards all traffic to the origin server.

Syntax

otd_createConfiguration(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
name	Name of the configuration to be created. Name should not contain spaces, invalid characters or non-ASCII characters.	Mandatory.
listener-port	Listener port through which the server accepts requests. Range of values: port number should be an integer between 1 and 65535, both inclusive.	Mandatory.
server-name	Valid only if `origin-server-type` is http or https. The server name is used in any URLs that are generated automatically by the server and sent to the client. This server name should be the virtual host name or alias name if your server uses an alias. If a colon and port number are appended to the server name then that port is used in the generated URLs.
ip	The server will bind to this Internet Protocol (IP) address for the default listener. Only traffic sent to this IP address will be serviced. * indicates that the server will listen on all IP addresses. Range of values: *, a hostname, or an IPV4/IPV6 address
origin-server-type	Type of requests handled by the origin servers. Range of values: `http`/`https`/`tcp` Default: `http`
origin-server	A back-end server to which Oracle Traffic Director forwards requests that it receives from clients, and from which it receives responses to client requests. The origin servers could, for example, be application servers like Oracle WebLogic Server, web servers, LDAP servers, and so on. This should be specified as a comma separated list of origin servers of the format host:port.	Multi-valued.

Note:

You cannot invoke this command in offline mode until you have read a domain using readDomain. Make sure to update the domain using updateDomain after the command to apply the changes.

Example

Online:

# Online
props = {}
props['name'] = 'foo'
props['listener-port'] = '12345'
props['server-name'] = 'foo'
props['origin-server'] = 'vault.example.com:80'
otd_createConfiguration(props)

Offline:

# Offline
readDomain('/export/domains/otd_domain')
props = {}
props['name'] = 'foo'
props['listener-port'] = '12345'
props['server-name'] = 'foo'
props['origin-server'] = 'vault.example.com:80'
otd_createConfiguration(props)
updateDomain()
closeDomain()

otd_createContentRule

Description

Use this command to create a content rule.

Syntax

otd_createContentRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server for which the content rule is to be created.	Mandatory.
content-rule	Name of the content rule to be created.	Mandatory. Name should be unique.
uri-prefix	URI prefix that has to be mapped to a directory.	Mandatory.
directory-path	Absolute server path and a valid directory for storing documents.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['uri-prefix'] = '/baz'
props['directory-path'] = '/qux'
props['content-rule'] = 'content-rule-1'
otd_createContentRule(props)

otd_createErrorPage

Description

Use this command to create an error page corresponding to the specified error code.

Syntax

otd_createErrorPage(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
code	Error code for which you want to create an error page. Range of values: 400 - 599.	Mandatory.
error-page	Absolute path for which an error page is to be created.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['code'] = '408'
props['error-page'] = '/documents/otd'
otd_createErrorPage(props)

otd_createEvent

Description

Use this command to create an event.

Syntax

otd_createEvent(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration for which the event is to be created.	Mandatory.
event	Name that uniquely identifies the event. Name can consist of one or more characters. Whitespace is not permitted.	Mandatory.
command	The command that the event executes. Range of values: the value can be restart, reconfig, rotate-log, rotate-access-log, and update-crl, or any executable command.	Mandatory.
time	Time, for example, 12:30, when this event is to be started. Range of values: the format of the time is `hh`:`mm`.
month	Month at which this event should occur. Range of values: 1-12.
day-of-month	Day of the month at which this event should occur. Range of values: 1-31.
day-of-week	Day of the week at which this event should occur. Range of values: Sun, Mon, Tue, Wed, Thu, Fri, or Sat.
interval	Time interval at which this event should occur. Range of values: an interval in seconds between 60 (1 minute) and 86400 (1 day), inclusive.
enabled	Whether the event is enabled at runtime. Range of values: true or false. Default: true.

Example

props = {}
props['configuration'] = 'foo'
props['event'] = 'event-1'
props['command'] = 'rotate-log'
props['time'] = '12:00'
otd_createEvent(props)

otd_createFailoverGroup

Description

Use this command to create a failover group consisting of two Oracle® Fusion Middleware instances grouped by a unique virtual IP address (VIP), to provide high availability in active-passive mode. Requests are received at the specified VIP address and routed to the Oracle® Fusion Middleware instance that is designated as the primary instance. If the primary instance is not reachable, requests are routed to the backup instance.

For active-active failover, you should create two failover groups, both consisting of the same two nodes, but with the primary and backup roles reversed. Each instance is the primary instance for one VIP address and the backup for the other VIP.

There can be a maximum of 255 failover groups, across configurations.

When creating a failover group, if the administration node process is running as non-root on the node where the instances are located, then you must run otd_startFailover on those nodes as a root user. This is to manually start the failover. If this command is not executed, failover will not start and there will be no high availability.

For more information about how failover works in Oracle Traffic Director, see Administering Oracle Traffic Director.

Syntax

otd_createFailoverGroup(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration for which the failover group is to be created.	Mandatory.
virtual-ip	The VIP for which we are creating a failover for. The VIP should belong to the same subnet as that of the nodes in the failover group, and must be accessible to clients. Range of values: host name or an IPv4/IPv6 address.	Mandatory.
primary-instance	An existing instance which is designated as the primary.	Mandatory.
backup-instance	An existing instance which is designated as the backup.	Mandatory.
primary-nic	A network interface, on the node where primary-instance is running, upon which the VIP must be managed.	Mandatory.
backup-nic	A network interface, on the node where backup-instance is running, upon which the VIP must be managed.	Mandatory.
router-id	A VRRP necessity, identifies the VRRP router group that are participating in failover for a VIP. The value should be unique across failover groups. If not specified, the default router-id will be a random number between 1 - 255. Range of values: positive integer, valid range is 1-255. Default: random number between 1 - 255

Example

props = {}
props['configuration'] = 'ha'
props['virtual-ip'] = '192.0.2.1'
props['primary-instance'] = '1.example.com'
props['backup-instance'] = '2.example.com'
props['primary-nic'] = 'eth0'
props['backup-nic'] = 'eth0'
otd_createFailoverGroup(props)

otd_createHttpListener

Description

Use this command to create a new HTTP listener socket with a set of initial values. All virtual servers have an HTTP listener specified. When a new request comes in, Oracle® Fusion Middleware determines which virtual server to send it to, based on the configured HTTP listener.

Syntax

otd_createHttpListener(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
http-listener	Name that uniquely identifies the HTTP listener. Name can consist of one or more characters. Whitespace is not permitted.	Mandatory.
port	Port on which to listen. Range of values: port number between 1 and 65535, inclusive.	Mandatory.
server-name	Default server name. May include a scheme (for example, http://) prefix and port (for example, :80) suffix . Can be a hostname, fully qualified domain name, IP address, or a URL prefix that contains one. The URL prefix must not specify a path.	Mandatory.
default-virtual-server-name	Name of the virtual server that processes requests that did not match a host.	Mandatory.
enabled	Whether the listener is enabled at runtime. Range of values: true or false. Default: true.
ip	IP address on which to listen. Range of values: *, a hostname, or an IP address.
acceptor-threads	Number of threads dedicated to accepting connections received by this listener. Range of values: 1 - 128. Default: auto-tuned.
blocking-io	Whether the server uses blocking IO. Range of values: true or false. Default: false.
blocking-accept	Enables/Disables blocking of the server Listen Socket while retaining client end points as non blocking (useful when MaxProcs > 1). Range of values: true or false. Default: false.
handle-protocol-mismatch	Range of values: true or false. Default: true.
family	The socket family used to connect to the origin server. Range of values: default, inet, inet6, or inet-sdp Default: auto-tuned.
listen-queue-size	Maximum size of the operating system listen queue backlog. Range of values: 1 - 1048576. Default: 128.
receive-buffer-size	Size (in bytes) of the operating system socket receive buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
send-buffer-size	Size (in bytes) of the operating system socket send buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
max-requests-per-connection	Maximum number of keep-alive requests that will be handled per HTTP connection after which the keep-alive connection will be closed. 0 indicates no limit. Range of values: any positive Integer Default: 0.
description	Description of the HTTP listener for the administrator's reference.

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
props['port'] = '23456'
props['server-name'] = 'example.com'
props['default-virtual-server-name'] = 'bar'
otd_createHttpListener(props)

otd_createInstance

Description

Use this command to create an instance of this configuration on the specified machine. Instance refers to the environment of a Oracle® Fusion Middleware daemon, including its configuration, log files, and other runtime artifacts such as lock databases, caches, and temporary files.

Syntax

otd_createInstance(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
machine-name	Name specified while creating the machine in the Oracle WebLogic Server console corresponding to the host name of the machine on which the Oracle Traffic Director instance is running.	Mandatory.

Note:

When this command is executed in offline mode, the instance file artifacts are created only if the machine specified is on the same host as that of the admin server. Otherwise, the instance file artifacts will get created after the start of both admin server and node manager.

Example

# Online
props = {}
props['configuration'] = 'foo'
props['machine-name'] = 'machine1'
otd_createInstance(props)
 
 
# Offline
readDomain('/export/domains/otd_domain')
props = {}
props['configuration'] = 'foo'
props['machine-name'] = 'machine1'
otd_createInstance(props)
updateDomain()
closeDomain()

otd_createMimeType

Description

Use this command to create a MIME type.

Syntax

otd_createMimeType(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
content-type	The content type of the MIME types.	Mandatory.
extensions	The file extension for the MIME value.	Mandatory. To define multiple file extensions, separate them by a comma (,)

Example

props = {}
props['configuration'] = 'foo'
props['content-type'] = 'bar'
props['extensions'] = 'baz'
otd_createMimeType(props)

otd_createOriginServer

Description

Use this command to create a origin pool server with a set of initial values to the existing origin server pool. The origin server defines a member of a server pool.

Syntax

otd_createOriginServer(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.
host	IP address/Host name of this origin server. Range of values: hostname or IP address.	Mandatory.
port	Port number of this origin server. Range of values: port number between 1 and 65535, inclusive.	Mandatory.
weight	Load distribution weight for this origin server. Range of values: 1 - 1000. Default: 1
backup	The parameter specifies if the origin server is a backup server. Range of values: true or false. Default: false.
max-connections	The maximum number of concurrent connections to a server. Range of values: 0 - 20480. Default: 0.
ramp-up-time	The time in seconds to ramp the sending rate up to the capacity of a newly up origin server. If the parameter is not specified, request rate accelerating will not be activated for the server. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 0.001.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['host'] = 'www.example.com'
props['port'] = '12345'
otd_createOriginServer(props)

otd_createOriginServerPool

Description

Use this command to create a origin-server pool. The origin-server pool configures a pool of origin servers that are used for load balancing requests.

Syntax

otd_createOriginServerPool(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name by which this server pool is referenced. Name can consist of one or more characters, whitespace is not permitted.	Mandatory.
origin-server	Represents an origin server that belongs to this server pool. Multiple comma separated values can be specified.	Multi-valued.
type	Specifies the type of (requests handled by) every server in this server pool. Range of values: tcp, http, or https. Default: http.
family	The socket family used to connect to servers in this pool. Range of values: default, inet, inet6, or inet-sdp. Default: auto-tuned.
load-distribution	Algorithm that is used for load distribution of this server pool. Range of values: round-robin, least-connection-count, or least-response-time. Default: least-connection-count.
proxy-server	Name of the proxy-server in the form of host:port.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['origin-server'] = 'www.example.com:12345'
otd_createOriginServerPool(props)

otd_createRequestLimit

Description

Use this command to create a request limit rule with a set of initial values.

Syntax

otd_createRequestLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
request-limit	Name of the request limit rule.	Mandatory.
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.
max-rps	Maximum number of requests that the virtual server can receive per second.
max-connections	Maximum number of concurrent matching connections.
monitor-attribute	Request attribute to monitor.

Example

props = {}props['configuration'] = 'foo'props['virtual-server'] = 'bar'props['request-limit'] = 'request-limit-1'
props['max-connections'] = '2048'
otd_createRequestLimit(props)

otd_createRoute

Description

Use this command to create a route with a set of initial values. Based on the condition specified while creating a route, the load balancing requests are routed to the specified origin-server pool. A default route is created when a virtual-server is created.

Syntax

otd_createRoute(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route to be created.	Mandatory.
origin-server-pool	Name of the origin server pool to which the load balancing requests must be routed.	Mandatory.
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.	`condition` cannot be specified if `uri-prefix` is specified.
uri-prefix	A uri-prefix is a URI path with wildcard patterns. If a request URI matches with the uri-prefix then the rule will be executed.	`uri-prefix` can not be specified if `condition` is specified.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_createRoute(props)

otd_createStandaloneDomain

Description

Use this command to create an Oracle Traffic Director standalone domain at the given location.

This command can only be run in offline mode.

Syntax

otd_createStandaloneDomain(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
instance	Name of the instance to be created.	Mandatory.
domain-home	Path to the domain directory which should contain the Oracle Traffic Director standalone domain.	Mandatory.
listener-port	Listener port through which the server accepts requests. Range of values: port number should be an integer between 1 and 65535, both inclusive.	Mandatory.
server-name	Valid only if origin-server-type is `http` or `https`. The server name is used in any URLs that are generated automatically by the server and sent to the client. This server name should be the virtual host name or alias name if your server uses an alias. If a colon and port number are appended to the server name then that port is used in the generated URLs.
ip	The server will bind to this Internet Protocol (IP) address for the default listener. Only traffic sent to this IP address will be serviced. * indicates that the server will listen on all IP addresses. Range of values: *, a hostname, or an IPV4/IPV6 address.
origin-server-type	Type of requests handled by the origin servers. Range of values: http/https/tcp. Default: http.
origin-server	A back-end server to which Oracle Traffic Director forwards requests that it receives from clients, and from which it receives responses to client requests. The origin servers could, for example, be application servers like Oracle WebLogic Server, web servers, LDAP servers, and so on. Specified as a comma separated list of origin servers of the format `host`:`port`.

Example

props = {}
props['instance'] = 'foo'
props['domain-home'] = '/export/domains/otd_standalone'
props['listener-port'] = '12345'\
props['server-name'] = 'foo.com'\
otd_createStandaloneDomain(props)

otd_createStandaloneInstance

Description

Use this command to create an Oracle Traffic Director instance in an Oracle Traffic Director standalone domain.

This command can only be run in offline mode.

Syntax

otd_createStandaloneDomain(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
domain-home	Path to the domain directory which should contain the Oracle Traffic Director standalone domain.	Mandatory.

Example

props = {}
props['name'] = 'foo'
props['domain-home'] = '/export/domains/otd_standalone'
props['listener-port'] = '12345'
props['server-name'] = 'foo.bar'
otd_createStandaloneInstance(props)

otd_createTcpListener

Description

Use this command to create a new TCP listener with a set of initial values. When a new request comes in, Oracle Traffic Director determines which TCP proxy to send it to, based on the configured TCP listener.

Syntax

otd_createTcpListener(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name that uniquely identifies the listener. Name can consist of one or more characters. Whitespace is not permitted.	Mandatory.
port	Port on which to listen. Range of values: port number between 1 and 65535, inclusive.	Mandatory.
tcp-proxy-name	Name that identifies the exposed TCP service.	Mandatory.
enabled	Whether the instance is enabled. Range of values: true or false. Default: true.
ip	IP address on which to listen. Range of values: hostname, or an IP address.
acceptor-threads	Acceptor threads for this listening end point. Range of values: 1 - 128. Default: auto-tuned.
blocking-accept	Enables/Disables blocking of the server Listen Socket while retaining client end points as non blocking (useful when `MaxProcs` > 1). Range of values: true or false. Default: false.
description	Description of the TCP listener for the administrator's reference.
family	Protocol family. Range of values: default, inet, inet6, or inet-sdp. Default: auto-tuned.
listen-queue-size	Maximum size of the operating system listen queue backlog. Range of values: 1 - 1048576. Default: 128.
receive-buffer-size	Size (in bytes) of the operating system socket receive buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
send-buffer-size	Size (in bytes) of the operating system socket send buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
props['port'] = '34567'
props['tcp-proxy-name'] = 'tcp-proxy-1'
otd_createTcpListener(props)

otd_createTcpProxy

Description

Use this command to create a new TCP proxy with a set of initial values. A TCP proxy handles TCP requests through TCP listeners for traffic tunnelling to the listed origin servers. A TCP proxy can have several TCP listeners associated with it.

Syntax

otd_createTcpProxy(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-proxy	Name that uniquely identifies the exposed TCP service.	Mandatory.
origin-server-pool-name	Name of an existing server pool that provides the TCP service.	Mandatory.
enabled	Whether the TCP service is enabled. Range of values: true or false. Default: true.
session-idle-timeout	Maximum timeout in seconds for load balancer to wait for receiving/sending data in the session. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-proxy'] = 'bar'
props['origin-server-pool-name'] = 'tcp-origin-server-pool-1'
otd_createTcpProxy(props)

otd_createConfigurationVariable

Description

Use this command to define a variable for use in expressions, log formats, and obj.conf parameters.

Syntax

otd_createConfigurationVariable(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
name	Variable name consisting of letters, numbers, and underscores. Variable names must not begin with a number.	Mandatory.
value	Value corresponding to a variable name.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['name'] = 'bar'
props['value'] = 'baz'
otd_createConfigurationVariable(props)

otd_createVirtualServer

Description

Use this command to create a new virtual server with initial values defined.

Syntax

otd_createVirtualServer(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name that uniquely identifies the virtual server. Name can consist of one or more characters. Whitespace is not permitted.	Mandatory.
origin-server-pool	Name of the origin server pool for which a virtual-server is to be created.	Mandatory.
canonical-server-name	Canonical hostname of the virtual server (requests using a different hostname will be redirected to this hostname). Can be a Hostname, fully qualified domain name, IP address, or a URL prefix that contains one. The URL prefix must not specify a path.
log-file	Log file for the virtual server.
http-listener	Name of an HTTP listener associated with one or more of the virtual server's host hostnames. Multiple comma separated values can be specified.	Multi-valued.
host	Hostname of the virtual server services. Multiple comma separated values can be specified where each value can be a wildcard pattern that matches one or more hostnames.	Multi-valued. Mandatory if `http-listener` is set.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_createVirtualServer(props)

otd_createVirtualServerVariable

Description

Use this command to create a variable at the virtual server level. You can use the variable in expressions, log formats, and obj.conf parameters.

Syntax

otd_createVirtualServerVariable(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server for which the variable is to be created.	Mandatory.
name	Variable name consisting of letters, numbers, and underscores. Variable names must not begin with a number.	Mandatory.
value	Value corresponding to the variable.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['name'] = 'baz'
props['value'] = 'qux'
otd_createVirtualServerVariable(props)

otd_deleteCacheRule

Description

Use this command to delete the cache rule with the specified name.

Syntax

otd_deleteCacheRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
cache-rule	Name of the cache rule to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['cache-rule'] = 'cache-rule-1'
otd_deleteCacheRule(props)

otd_deleteCompressionRule

Description

Use this command to delete the compression rule with the specified name.

Syntax

otd_deleteCompressionRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
compression-rule	Name of the compression rule to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['compression-rule'] = 'compression-rule-1'
otd_deleteCompressionRule(props)

otd_deleteConfigFile

Description

Use this command to delete an existing configuration file.

Syntax

otd_deleteConfigFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
config-file	Name of the configuration file to be deleted. This can be any existing configuration file except `server.xml` and object-files referred by virtual servers.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['config-file'] = 'bar.conf'
otd_deleteConfigFile(props)

otd_deleteConfiguration

Description

Use this command to delete the configuration if it does not have any instances associated with it.

Syntax

otd_deleteConfiguration(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
name	Name of the configuration to be deleted.	Mandatory.
domain-home	Path to the directory which contains an Oracle Traffic Director domain.	Mandatory for Offline, not valid for Online.

Example

# Online
props = {}
props['name'] = 'foo'
otd_deleteConfiguration(props)
 
# Offline
readDomain('/export/domains/otd_domain')
props = {}
props['name'] = 'foo'
otd_deleteConfiguration(props)
updateDomain()
closeDomain()

otd_deleteConfigurationWebappFirewallRulesetFile

Description

Use this command to delete a ruleset file for a web application firewall installed at the configuration level.

Syntax

otd_deleteConfigurationWebappFirewallRulesetFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
ruleset-file	Name of the ruleset file that needs to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['ruleset-file'] = 'bar.conf'
otd_deleteConfigurationWebappFirewallRulesetFile(props)

otd_deleteContentRule

Description

Use this command to delete a content rule.

Syntax

otd_deleteContentRule(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
content-rule	Name of the content rule to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['content-rule'] = 'content-rule-1'
otd_deleteContentRule(props)

otd_deleteCrl

Description

Use this command to delete a certificate revocation list (CRL).

Syntax

otd_deleteCrl(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
issuer	Name of the CRL issuer.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['issuer'] = 'CN=GlobalSign ServerSign CA,OU=ServerSign CA,O=GlobalSign nv-sa,C=BE'
otd_deleteCrl(props)

See Also

help, otd_installCrl, otd_listCrls

otd_deleteErrorPage

Description

Use this command to delete the error page corresponding to the specified error code.

Syntax

otd_deleteErrorPage(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
code	Error code for which the error page is to be deleted. Range of values: 400 - 599.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['code'] = '408'
otd_deleteErrorPage(props)

otd_deleteEvent

Description

Use this command to delete a scheduled event.

Syntax

otd_deleteEvent(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
event	Name that uniquely identifies the event.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['event'] = 'event-1'
otd_deleteEvent(props)

otd_deleteFailoverGroup

Description

Use this command to delete the specified failover group. To change the VIP or any property of a failover group, you should delete the failover group and create it afresh.

When deleting a failover group, if the administration node process is running as non-root on the node where the instances are located and if at least one failover group is still available, then you must run otd_startFailover on those nodes as a root user. This is to manually restart the failover. On the other hand, after deleting a failover group, if no other failover groups are available for the corresponding instances, then otd_stopFailover must be executed to stop the failover. If you do not execute either otd_startFailover or otd_stopFailover, then the VIP associated with the deleted failover group will continue to be available.

Syntax

otd_deleteFailoverGroup(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-ip	The VIP for the failover group to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-ip'] = '10.128.10.10'
otd_deleteFailoverGroup(props)

otd_deleteHttpListener

Description

Use this command to delete an HTTP listener socket with the specified name.

Syntax

otd_deleteHttpListener(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
http-listener	Name of the HTTP listener to be deleted.	Mandatory.
force	Enables the forced deletion of the HTTP listener. Default: false.

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
otd_deleteHttpListener(props)

otd_deleteInstance

Description

Use this command to delete the specified instance.

Syntax

otd_deleteInstance(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration to which the instance belongs to.	Mandatory.
instance	Name of the instance to be deleted.	Mandatory.

Note:

When this command is executed in offline mode, the instance file artifacts are deleted only if the machine specified is on the same host as that of the admin server. Otherwise, the instance file artifacts will get deleted after the start of both admin server and node manager.

Example

# Online
props = {}
props['configuration'] = 'foo'
props['instance'] = 'otd_foo_machine1'
otd_deleteInstance(props)
 
# Offline
readDomain('/export/.../domains/otd_domain')
props = {}
props['configuration'] = 'foo'
props['instance'] = 'otd_foo_machine1'
otd_deleteInstance(props)
updateDomain()
closeDomain()

otd_deleteMimeType

Description

Use this command to delete a MIME type.

Syntax

otd_deleteMimeType(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
content-type	The content type of the MIME types.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['content-type'] = 'bar'
otd_deleteMimeType(props)

otd_deleteOriginServer

Description

Use this command to delete an origin server with the specified host and port.

Syntax

otd_deleteOriginServer(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.
host	IP address/Host name of the origin server to be deleted.	Mandatory.
port	Port number of the origin server to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['host'] = 'www.example.com'
props['port'] = '12345'
otd_deleteOriginServer(props)

otd_deleteOriginServerPool

Description

Use this command to delete the origin-server pool with the specified name.

Syntax

otd_deleteOriginServerPool(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_deleteOriginServerPool(props)

otd_deleteRequestLimit

Description

Use this command to delete the request limit with the specified name.

Syntax

otd_deleteRequestLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
request-limit	Name of the request limit rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['request-limit'] = 'request-limit-1'
otd_deleteRequestLimit(props)

otd_deleteRoute

Description

Use this command to delete the route with the specified name.

Syntax

otd_deleteRoute(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
otd_deleteRoute(props)

otd_deleteStandaloneInstance

Description

Use this command to delete an Oracle Traffic Director instance with the specified name in an Oracle Traffic Director standalone domain.

This command can only be run in offline mode.

Syntax

otd_deleteStandaloneInstance(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
instance	Name of the instance to be deleted.	Mandatory.
domain-home	Path to the domain directory which should contain the Oracle Traffic Director standalone domain.	Mandatory.

Example

props = {}
props['instance'] = 'foo'
props['domain-home'] = '/export/domains/otd_standalone'
otd_deleteStandaloneInstance(props)

otd_deleteTcpListener

Description

Use this command to delete the TCP listener with the specified name.

Syntax

otd_deleteTcpListener(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name of the TCP listener to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
otd_deleteTcpListener(props)

otd_deleteTcpProxy

Description

Use this command to delete the TCP proxy with the specified name.

Syntax

otd_deleteTcpProxy(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-proxy	Name of the TCP proxy to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-proxy'] = 'bar'
otd_deleteTcpProxy(props)

otd_deleteConfigurationVariable

Description

Use this command to delete a variable defined at the configuration level.

Syntax

otd_deleteConfigurationVariable(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
name	Name of the variable to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['name'] = 'bar'
otd_deleteConfigurationVariable(props)

otd_deleteVirtualServer

Description

Use this command to delete the virtual server with the specified name.

Syntax

otd_deleteVirtualServer(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_deleteVirtualServer(props)

otd_deleteVirtualServerVariable

Description

Use this command to delete the variable with the specified name defined at the virtual server level.

Syntax

otd_deleteVirtualServerVariable(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
name	Name of the variable to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['name'] = 'baz'
otd_deleteVirtualServerVariable(props)

otd_deleteVirtualServerWebappFirewallRulesetFile

Description

Use this command to delete a ruleset file for a web application firewall installed at the virtual server level.

Syntax

otd_deleteVirtualServerWebappFirewallRulesetFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
ruleset-filename	Name of the ruleset file that needs to be deleted.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['ruleset-file'] = 'baz.conf'
otd_deleteVirtualServerWebappFirewallRulesetFile(props)

otd_disableOriginServerPoolMaintenance

Description

Use this command to disable maintenance for the origin server pool.

Syntax

otd_disableOriginServerPoolMaintenance(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_disableOriginServerPoolMaintenance(props)

otd_disablePerfDump

Description

Use this command to disable access to perfdump output through a URI.

Syntax

otd_disablePerfDump(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disablePerfDump(props)

otd_disableRouteAuth

Description

Use this command to disable the route authentication.

Syntax

otd_disableRouteAuth(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route'
otd_disableRouteAuth(props)

See Also

help, otd_enableRouteAuth

otd_disableRouteBandwidthLimit

Description

Use this command to disable bandwidth limiting at the route level.

Syntax

otd_disableRouteBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.
type	Type of bandwidth limiting to be disabled. Range of values: `request` or `response`.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['type'] = 'request'
otd_disableRouteBandwidthLimit(props)

otd_disableStatsXml

Description

Use this command to disable access to virtual server statistics in XML format through a URI.

Syntax

otd_disableStatsXml(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disableStatsXml(props)

otd_disableVirtualServerAccessLog

Description

Use this command to disable the access log for a virtual server.

Syntax

otd_disableVirtualServerAccessLog(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disableVirtualServerAccessLog(props)

otd_disableWebAppFirewall

Description

Use this command to disable the web application firewall for the virtual server.

Syntax

otd_disableWebAppFirewall(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disableWebappFirewall(props)

otd_disableVirtualServerRequestBandwidthLimit

Description

Use this command to disable request bandwidth limiting at the virtual server level.

Syntax

otd_disableVirtualServerRequestBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disableVirtualServerRequestBandwidthLimit(props)

otd_disableVirtualServerResponseBandwidthLimit

Description

Use this command to disable response bandwidth limiting at the virtual server level.

Syntax

otd_disableVirtualServerResponseBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_disableVirtualServerResponseBandwidthLimit(props)

otd_enableOriginServerPoolMaintenance

Description

Use this command to enable the maintenance for an origin-server-pool.

Syntax

otd_enableOriginServerPoolMaintenance(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.
response-code	Specifies the response code of the request when it lands on a maintenance enabled origin server pool. When this is not configured, its implicit value will be 200 if `response-file` is specified, else it will be 503.	`response-code` 200 is not allowed if `response-file` is not configured.
response-file	Absolute path of an HTML file to send to the client when the request lands on a maintenance enabled origin server pool.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['response-code'] = '503'
otd_enableOriginServerPoolMaintenance(props)

otd_enablePerfDump

Description

Enables access to perfdump output through a URI. The perfdump utility collects the Oracle Traffic Director performance data and displays it in ASCII format. This utility allows you to monitor a greater variety of statistics. With perfdump, the statistics are unified. Rather than monitoring a single process, statistics are multiplied by the number of processes. This gives you a more accurate view of the server performance.

Syntax

otd_enablePerfDump(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
uri	The URI at which the `perfdump` report should be available. Default: /.perf.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_enablePerfDump(props)

otd_enableRouteAuth

Description

Use this command to enable the route authentication.

Syntax

otd_enableRouteAuth(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.
auth-user	Specifies the authenticated user.	Mandatory.
auth-password	Specifies the password for the user.	Mandatory.
auth-header	Specifies the name of the authentication header. Default is Authorization.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['auth-user'] = 'baz'
props['auth-password'] = 'qux'
otd_enableRouteAuth(props)

See Also

help, otd_disableRouteAuth

otd_enableRouteBandwidthLimit

Description

Use this command to enable bandwidth limiting at the route level.

Syntax

otd_enableRouteBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server for which bandwidth limit is to be enabled.	Mandatory.
route	Name of the route for which bandwidth limit is to be enabled.	Mandatory.
type	Type of bandwidth limiting is to be applied. Range of values: `request` or `response`.	Mandatory.
max-bps-per-monitor	Value in bytes/sec for maximum request bandwidth for the entire bucket. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
max-bps-per-connection	Value in bytes/sec for maximum request bandwidth per connection. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
timeout	Value in second. Request is aborted when it had to wait in the queue for this much time. Default: 60.
monitor	Name of bucket to which the request belongs to. Default: $ip if type is "response".
error-code	HTTP error code that is returned when request is aborted. Range of value: 400-599. Default: 503.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['type'] = 'request'
props['max-bps-per-monitor'] = '512'
otd_enableRouteBandwidthLimit(props)

otd_enableStatsXml

Description

Use this command to enable access to virtual server statistics in XML format through a URI.

Syntax

otd_enableStatsXml(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
uri	The URI at which the statistics report in XML format should be available. Default: /stats-xml.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_enableStatsXml(props)

otd_enableWebAppFirewall

Description

Use this command to enable the web application firewall for a specific virtual server.

Syntax

otd_enableWebAppFirewall(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_enableWebappFirewall(props)

otd_enableVirtualServerAccessLog

Description

Use this command to enable the access log for a virtual server.

Syntax

otd_VirtualServerAccessLog(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
log-file	Path to the file where access logs for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/access.log
format	A format is a string that can be used to customize the format and the fields that are logged in the access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%
log-ip	Whether to log the IP of the client into the access log. Range of values: true or false. Default: false.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['log-file'] = 'logs/access.log'
otd_enableVirtualServerAccessLog(props)

otd_enableVirtualServerRequestBandwidthLimit

Description

Use this command to enable request bandwidth limiting at the virtual server level.

Syntax

otd_enableVirtualServerRequestBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server for which bandwidth limit is to be enabled.	Mandatory.
max-bps-per-monitor	Value in bytes/sec for maximum request bandwidth for the entire bucket. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
max-bps-per-connection	Value in bytes/sec for maximum request bandwidth per connection. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
timeout	Value in second. Request is aborted when it had to wait in the queue for this much time. Default: 60.
monitor	Name of bucket to which the request belongs to. Default: $ip if type is "response".
error-code	HTTP error code that is returned when request is aborted. Range of value: 400-599. Default: 503.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['max-bps-per-monitor'] = '1024'
otd_enableVirtualServerRequestBandwidthLimit(props)

otd_enableVirtualServerResponseBandwidthLimit

Description

Use this command to enable response bandwidth limiting at the virtual server level.

Syntax

otd_enableVirtualServerResponseBandwidthLimit(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server for which bandwidth limit is to be enabled.	Mandatory.
max-bps-per-monitor	Value in bytes/sec for maximum request bandwidth for the entire bucket. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
max-bps-per-connection	Value in bytes/sec for maximum request bandwidth per connection. Default: 0.	Setting it to 0 means no bandwidth limiting is done.
timeout	Value in second. Request is aborted when it had to wait in the queue for this much time. Default: 60.
monitor	Name of bucket to which the request belongs to. Default: $ip if type is "response".
error-code	HTTP error code that is returned when request is aborted. Range of value: 400-599. Default: 503.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['max-bps-per-monitor'] = '1024'
otd_enableVirtualServerResponseBandwidthLimit(props)

otd_exportKeyStore

Description

Use this command to export all the certificates within a keystore into an Oracle wallet which will be placed in the config directory of the configuration. If wallet password is set then the exported wallet is a password protected wallet (ewallet.p12), otherwise it is an auto login only wallet (cwallet.sso).

Syntax

otd_exportKeyStore(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_exportKeyStore(props)

otd_forwardProxyInfo

Description

Use this command to forward the proxy information. Information about a particular proxy parameter is generated and forwarded to the origin server using a HTTP header. Note that the HTTP header used by default is different depending on whether or not the origin server is Oracle WebLogic Server.

Parameter Name	Description	Default HTTP Header for WLS	Default HTTP Header for non-WLS
jroute	Information about request routing used by the set-origin-server function and some Servlet containers to implement session stickiness.	Proxy-jroute	Proxy-jroute
via	Proxy servers and protocol versions that were involved in routing a request.	Via	Via
ip	Client's actual IP address.	Wl-proxy-client-ip	Client-ip
xforwarded-for	Used to keep track of the originating client IP connecting through a proxy.	X-forwarded-for	X-forwarded-for
proxy-agent	Proxy server product name and version.	Proxy-agent	Proxy-agent
cache-info	Client cache hits.	Cache-info	Cache-info
ssl	A value of true/false indicating whether the client connection was over SSL	Wl-proxy-ssl	Proxy-ssl
cipher	Client's SSL/TLS cipher suite.	Proxy-cipher	Proxy-cipher
keysize	Client's SSL/TLS key size.	Wl-Proxy-client-keysize	Proxy-keysize
secret-keysize	Size of the client's SSL/TLS secret key.	Wl-proxy-client-secretkeysize	Proxy-secret-keysize
ssl-id	Client's SSL/TLS session ID.	Proxy-ssl-id	Proxy-ssl-id
auth-cert	Client's SSL/TLS certificate in X.509 format.	Wl-proxy-client-cert	Proxy-auth-cert
user-dn	Distinguished name of the subject of the client's SSL/TLS certificate.	Proxy-user-dn	Proxy-user-dn
issuer-dn	Distinguished name of the issuer of the client's SSL/TLS certificate.	Proxy-issuer-dn	Proxy-issuer-dn

Syntax

otd_forwardProxyInfo(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.
param	Name of the proxy parameter to be blocked. Range of values: jroute, via, ip, cipher, proxy-agent, keysize, secret-keysize, ssl-id, issuer-dn, user-dn, auth-cert, xforwarded-for, cache-info, ssl.	Mandatory.
header	Name of the HTTP header used to send the proxy parameter to the origin server. Default: the default HTTP header corresponding to the specified proxy parameter.	Mandatory.

Note:

If an incoming request includes the specified header, Oracle Traffic Director will replace the header from the request that is forwarded to the origin server with the generated header.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['param'] = 'via'
otd_forwardProxyInfo(props)

otd_getAccessLogBufferProperties

Description

Use this command to view the access-log buffer properties. The properties that this command returns are described in otd_setAccessLogBufferProperties.

Syntax

otd_getAccessLogBufferProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getAccessLogBufferProperties(props)

otd_getCacheProperties

Description

Use this command to view the cache properties. The properties that this command returns are described in otd_setCacheProperties.

Syntax

otd_getCacheProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getCacheProperties(props)

See Also

help, otd_setCacheProperties

otd_getCacheRuleProperties

Description

Use this command to view the cache rule properties. The properties that this command returns are described in otd_setCacheRuleProperties.

Syntax

otd_getCacheRuleProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
cache-rule	Name of the cache rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['cache-rule'] = 'cache-rule-1'
otd_getCacheRuleProperties(props)

otd_getCompressionRuleProperties

Description

Use this command to view compression rule properties. The properties that this command returns are described in otd_setCompressionRuleProperties.

Syntax

otd_getCompressionRuleProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
compression-rule	Name of the compression rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['compression-rule'] = 'compression-rule-1'
otd_getCompressionRuleProperties(props)

otd_getConfigFile

Description

Use this command to view the contents of a configuration file.

Syntax

otd_getConfigFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
config-file	Name of the configuration file that needs to be fetched.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['config-file'] = 'foo-obj.conf'
otd_getConfigFile(props)

otd_getConfigurationAccessLogProperties

Description

Use this command to view these access-log properties for a configuration:

Property	Description
file	Path to the file where access logs for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/access.log
format	A format is a string that can be used to customize the format and the fields that are logged in the access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%
default-access-log-format	Default format for the access log entries: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%

Syntax

otd_getConfigurationAccessLogProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getConfigurationAccessLogProperties(props)

otd_getConfigurationCrlProperties

Description

Use this command to view the certificate revocation list (CRL) properties. The properties that this command returns are described in otd_setConfigurationCrlProperties.

Syntax

otd_getConfigurationCrlProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getConfigurationCrlProperties(props)

See Also

help, otd_setConfigurationCrlProperties

otd_getConfigurationProperties

Description

Use this command to view the configuration properties. The properties that this command returns are described in otd_setConfigurationProperties.

Syntax

otd_getConfigurationProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getConfigurationProperties(props)

See Also

help, otd_setConfigurationProperties

otd_getContentRuleProperties

Description

Use this command to view the content rule properties. The properties that this command returns are described in otd_setContentRuleProperties.

Syntax

otd_getContentRuleProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
content-rule	Name of the content rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['content-rule'] = 'content-rule-1'
otd_getContentRuleProperties(props)

otd_getDnsCacheProperties

Description

Use this command to view the Domain Name Server (DNS) cache properties. The properties that this command returns are described in otd_setDnsCacheProperties.

Syntax

otd_getDnsCacheProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getDnsCacheProperties(props)

See Also

help, otd_setDnsCacheProperties

otd_getDnsProperties

Description

Use this command to view the Domain Name Server (DNS) properties. DNS associates a standard IP address such as, 192.0.3.11, with host names such as, www.example.com. The properties that this command returns are described in otd_setDnsProperties.

Syntax

otd_getDnsProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getDnsProperties(props)

See Also

help, otd_setDnsProperties

otd_getEventProperties

Description

Use this command to get the event properties. The properties that this command returns are described in otd_setEventProperties.

Syntax

otd_getEventProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
event	Name of the event.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['event'] = 'bar'
otd_getEventProperties(props)

otd_getFileCacheProperties

Description

Use this command to view the file cache properties. The properties that this command returns are described in otd_setFileCacheProperties.

Syntax

otd_getFileCacheProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getFileCacheProperties(props)

See Also

help, otd_setFileCacheProperties

otd_getFailoverGroupProperties

Description

Use this command to view the following properties of a failover group:

Property	Description	Comments
virtual-ip	The VIP for which we are creating a failover for. The VIP should belong to the same subnet as that of the nodes in the failover group, and must be accessible to clients. Range of values: host name or an IPv4/IPv6 address.	Mandatory.
primary-instance	An existing instance which is designated as the primary.	Mandatory.
backup-instance	An existing instance which is designated as the backup.	Mandatory.
primary-nic	A network interface, on the node where primary-instance is running, upon which the VIP must be managed.	Mandatory.
backup-nic	A network interface, on the node where backup-instance is running, upon which the VIP must be managed.	Mandatory.
router-id	A VRRP necessity, identifies the VRRP router group that are participating in failover for a VIP. The value should be unique across failover groups. Range of values: positive integer, valid range is 1-255. Default: random number between 1 - 255

Syntax

otd_getFailoverGroupProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration for which the failover group is to be created.	Mandatory.
virtual-ip	Virtual IP that uniquely identifies the failover group.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-ip'] = '192.0.2.1'
otd_getFailoverGroupProperties(props)

otd_getHealthCheckProperties

Description

Use this command to view the health-check properties. The properties that this command returns are described in otd_setHealthCheckProperties.

Syntax

otd_getHealthCheckProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_getHealthCheckProperties(props)

See Also

help, otd_setHealthCheckProperties

otd_getHttpListenerProperties

Description

Use this command to view the HTTP listener properties. The properties that this command returns are described in otd_setHttpListenerProperties.

Syntax

otd_getHttpListenerProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
http-listener	Name of the HTTP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
otd_getHttpListenerProperties(props)

otd_getHttpListenerSslProperties

Description

Use this command to view the Secure Sockets Layer (SSL) properties for an HTTP listener. SSL is a software library establishing a secure connection between the client and server. SSL is used to implement HTTPS, the secure version of HTTP.

The properties that this command returns are described in otd_setHttpListenerSslProperties.

Syntax

otd_getHttpListenerSslProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
http-listener	Name of the HTTP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
otd_getHttpListenerSslProperties(props)

See Also

help, otd_setHttpListenerSslProperties

otd_getHttpProperties

Description

Use this command to view the HTTP properties. The properties that this command returns are described in otd_setHttpProperties.

Syntax

otd_getHttpProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getHttpProperties(props)

See Also

help, otd_setHttpProperties

otd_getHttpThreadPoolProperties

Description

Use this command to view the thread-pool properties. You can use thread pools to allocate a certain number of threads to a specific service. By defining a pool with the maximum number of threads as 1, only one request is allowed to the specified service function. The properties that this command returns are described in otd_setHttpThreadPoolProperties.

Syntax

otd_getHttpThreadPoolProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getHttpThreadPoolProperties(props)

See Also

help, otd_setHttpThreadPoolProperties

otd_getKeepaliveProperties

Description

Use this command to view the keep-alive properties. The keep-alive or HTTP/1.1 persistent connection handling subsystem in Oracle Traffic Director is designed to be scalable. If the configuration does not conform as required, the performance can be less than optimal if the workload is not persistent (that is, HTTP/1.0 without the KeepAlive header), or for a lightly loaded system that is primarily servicing keep-alive connections. The properties that this command returns are described in otd_setKeepaliveProperties.

Syntax

otd_getKeepAliveProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getKeepaliveProperties(props)

See Also

help, otd_setKeepaliveProperties

otd_getLogProperties

Description

Use this command to view the log properties. The properties that this command returns are described in otd_setLogProperties.

Syntax

otd_getLogProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getLogProperties(props)

See Also

help, otd_setLogProperties

otd_getOriginServerPoolMaintenanceProperties

Description

Use this command to view the maintenance properties for the origin server pool. The properties that this command returns are described in otd_enableOriginServerPoolMaintenance.

Syntax

otd_getOriginServerPoolMaintenanceProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_getOriginServerPoolMaintenanceProperties(props)

otd_getOriginServerPoolProperties

Description

Use this command to view the origin-server pool properties. The properties that this command returns are described in otd_setOriginServerPoolProperties.

Syntax

otd_getOriginServerPoolProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_getOriginServerPoolProperties(props)

otd_getOriginServerProperties

Description

Use this command to view origin server properties. The properties that this command returns are described in otd_setOriginServerPoolProperties.

Syntax

otd_getOriginServerProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.
host	IP address/host name of the origin server.	Mandatory.
port	Port number of the origin server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['host'] = 'www.example.com'
props['port'] = '12345'
otd_getOriginServerProperties(props)

otd_getOriginServerPoolSslProperties

Description

Use this command to view the SSL properties of the origin server. The properties that this command returns are described in otd_setOriginServerPoolSslProperties.

Syntax

otd_getOriginServerPoolSslProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_getOriginServerPoolSslProperties(props)

otd_getPartitionAccessLogProperties

Description

Use this command to view these access-log properties for a partition:

Property	Description
log-file	Path to the file where access logs for the partition will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/$PARTITION_NAME.log
format	A format is a string that can be used to customize the format and the fields that are logged in the partition access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%
default-access-log-format	Default format for the partition access log entries: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%

Syntax

otd_getPartitionAccessLogProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration. This must be the name of the configuration that is specified while registering the Oracle Traffic Director runtime with the Lifecycle Manager.	Mandatory.
partition	Name of the partition.	Mandatory.

Example

props = {}
props['configuration'] = 'mt'
props['partition'] = 'WLSPartition'
otd_getPartitionAccessLogProperties(props)

otd_getPerfDump

Description

Use this command to view the runtime statistics for various subsystems as a text report on the browser.

Syntax

otd_getPerfDump(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
instance-name	Name of the instance.	Mandatory.
domain-home	Path to the directory which contains the Oracle Traffic Director domain	Mandatory for Offline, not valid for Online.

Example

# Online
props = {}
props['instance-name'] = 'otd_abc123.example.com'
otd_getPerfDump(props)
 
# Offline
props = {}
props['domain-home'] = '/export/domains/otd_domain'
props['instance-name'] = 'otd_abc123.example.com'
otd_getPerfDump(props)

otd_getPerfDumpProperties

Description

Use this command to get the following perfdump properties:

Property	Description	Comments
enabled	Whether `perfdump` is enabled. Default is false.	Mandatory.
uri	The URI at which the `perfdump` report should be available. Default: /.perf.	Mandatory.

Syntax

otd_getPerfDumpProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getPerfDumpProperties(props)

otd_getRequestLimitProperties

Description

Use this command to view the request-limit properties. The properties that this command returns are described in otd_setRequestLimitProperties.

Syntax

otd_getRequestLimitProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
request-limit	Name of the request limit rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['request-limit'] = 'request-limit-1'
otd_getRequestLimitProperties(props)

otd_getRouteAuthProperties

Description

Use this command to view the following route authentication properties:

Property	Description	Comments
auth-user	Specifies the authenticated user.	Mandatory.
auth-header	Specifies the name of the authentication header. Default is Authorization.

Syntax

otd_getRouteAuthProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
otd_getRouteAuthProperties(props)

otd_getRouteBandwidthLimitProperties

Description

Use this command to get bandwidth limiting properties at the route level.

Syntax

otd_getRouteBandwidthLimitProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.
type	Type of bandwidth limiting. Range of values: `request` or `response`.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['type'] = 'request'
otd_getRouteBandwidthLimitProperties(props)

otd_getRouteProperties

Description

Use this command to view route properties. The properties that this command returns are described in otd_setRouteProperties.

Syntax

otd_getRouteProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
otd_getRouteProperties(props)

otd_getSnmpProperties

Description

Use this command to view the Simple Network Management Protocol (SNMP) properties. The properties that this command returns are described in otd_setSnmpProperties.

Syntax

otd_getSnmpProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getSnmpProperties(props)

otd_getSslSessionCacheProperties

Description

Use this command to view the properties that are currently defined for caching SSL session data. The properties that this command returns are described in otd_setSslSessionCacheProperties.

Syntax

otd_getSslSessionCacheProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getSslSessionCacheProperties(props)

See Also

help, otd_setSslSessionCacheProperties

otd_getStatsProperties

Description

Use this command to view properties of the statistics collection subsystem. The properties that this command returns are described in otd_setStatsProperties.

Syntax

otd_getStatsProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getStatsProperties(props)

See Also

help, otd_setStatsProperties

otd_getStatsXml

Description

Use this command to view runtime statistics for various subsystems in XML format.

Syntax

otd_getStatsXml(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
instance	Name of the instance.	Mandatory.
domain-home	Path to the directory which contains the Oracle Traffic Director domain.	Mandatory for Offline, not valid for Online.

Example

Online syntax:

props = {}
props['instance'] = 'otd_foo_machine1'
otd_getStatsXml(props)

Offline syntax:

props = {}
props['domain-home'] = '/export/domains/otd_domain'
props['instance'] = 'otd_foo_machine1'
otd_getStatsXml(props)

otd_getStatsXmlProperties

Description

Use this command to view these properties defined for gathering and reporting statistical data in XML format:

Property	Description	Default
enabled	Whether access to virtual-server statistics in XML format through a URI is enabled.	false
uri	The URI at which the statistics report in XML format should be available.	/stats-xml

Syntax

otd_getStatsXmlProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getStatsXmlProperties(props)

otd_getTcpAccessLogProperties

Description

Use this command to view these properties of the TCP access log. The properties that this command returns are described in otd_setTcpAccessLogProperties.

Property	Description
file	Path to the file where the access log for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/tcp-access.log

Syntax

otd_getTcpAccessLogProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getTcpAccessLogProperties(props)

See Also

help, otd_setTcpAccessLogProperties

otd_getTcpListenerProperties

Description

Use this command to view the properties of the TCP listener. The properties that this command returns are described in otd_setTcpListenerProperties.

Syntax

otd_getTcpListenerProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name of the TCP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
otd_getTcpListenerProperties(props)

otd_getTcpListenerSslProperties

Description

Use this command to view the Secure Sockets Layer (SSL) properties for a TCP listener. SSL is a software library establishing a secure connection between the client and server. SSL is used to implement HTTPS, the secure version of HTTP.

The properties that this command returns are described in otd_setTcpListenerSslProperties.

Syntax

otd_getTcpListenerSslProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name of the TCP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
otd_getTcpListenerSslProperties(props)

See Also

help, otd_setTcpListenerSslProperties

otd_getTcpProxyProperties

Description

Use this command to view the properties of the TCP proxy.

Syntax

otd_getTcpProxyProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-proxy	Name that uniquely identifies the exposed TCP service.	Mandatory.

The properties that this command returns are described in otd_setTcpProxyProperties.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-proxy'] = 'bar'
otd_getTcpProxyProperties(props)

otd_getTcpThreadPoolProperties

Description

Use this command to view the properties of the TCP thread pool. The properties that this command returns are described in otd_setTcpThreadPoolProperties.

Syntax

otd_getTcpThreadPoolProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_getTcpThreadPoolProperties(props)

See Also

help, otd_setTcpThreadPoolProperties

otd_getVirtualServerAccessLogProperties

Description

Use this command to view the following access-log properties:

Property	Description
enabled	Whether the server writes to this access log. Range of values: true or false. Default: true.
file	Path to the file where access logs for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/access.log
format	A format is a string that can be used to customize the format and the fields that are logged in the access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%
log-ip	Whether to log the IP of the client into the access log. Range of values: true or false. Default: false.
default-access-log-format	Default format for the access log entries: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%

Syntax

otd_getVirtualServerAccessLogProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getVirtualServerAccessLogProperties(props

otd_getVirtualServerRequestBandwidthLimitProperties

Description

Use this command to get request bandwidth limiting properties at the virtual server level.

Syntax

otd_getVirtualServerRequestBandwidthLimitProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getVirtualServerRequestBandwidthLimitProperties(props)

otd_getVirtualServerResponseBandwidthLimitProperties

Description

Use this command to get response bandwidth limiting properties at the virtual server level.

Syntax

otd_getVirtualServerResponseBandwidthLimitProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getVirtualServerBandwidthLimitProperties(props)

otd_getVirtualServerProperties

Description

Use this command to view the properties of a virtual server. The properties that this command returns are described in otd_setVirtualServerProperties.

Syntax

otd_getVirtualServerProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getVirtualServerProperties(props)

otd_getVirtualServerSslProperties

Description

Use this command to get the SSL properties for a virtual server. The properties that this command returns are documented in otd_setVirtualServerSslProperties.

Syntax

otd_getVirtualServerSslProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getVirtualServerSslProperties(props)

See Also

help, otd_setVirtualServerSslProperties

otd_getWebappFirewallProperties

Description

Use this command to view the properties of a web application firewall. The properties that this command returns are described in otd_setWebappFirewallProperties.

Syntax

otd_getWebappFirewallProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_getWebappFirewallProperties(props)

otd_installConfigurationWebappFirewallRulesetFile

Description

Use this command to upload a file containing Web Application Firewall (WAF) rules into the server configuration directory. These rules will apply server-wide across all virtual servers.

Syntax

otd_installConfigurationWebappFirewallRulesetFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
file-path	The full path of the ruleset file to be installed.	Mandatory.
file-on-server	Whether the file to be installed is available on the administration server host. Default is false.

Example

props = {}
props['configuration'] = 'foo'
props['file-path'] = '/export/bar.conf'
otd_installConfigurationWebappFirewallRulesetFile(props)

otd_installCrl

Description

Use this command to install a certificate revocation list (CRL) issued by a Certificate Authority (CA) into the server configuration directory. A CRL lists all certificates that either client or server users should no longer trust.

Syntax

otd_installCrl(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
file-path	Specify the full path of the CRL file that you want to install.	Mandatory.
file-on-server	If you specify this option, the CRL file is available on the administration server computer. If you do not specify this option, the CRL file is assumed to be available on the client machine and will be uploaded to the server.

Example

props = {}
props['configuration'] = 'foo'
props['file-path'] = '/export/ServerSign.crl'
otd_installCrl(props)

See Also

help, otd_listCrls, otd_deleteCrl

otd_installVirtualServerWebappFirewallRulesetFile

Description

Use this command to upload the web application firewall ruleset files into the server configuration directory. These rules will apply only to requests handled by the specified virtual server.

Syntax

otd_installVirtualServerWebappFirewallRulesetFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
file-path	The full path of the ruleset file to be installed. This file should be available on the administration server host.	Mandatory.
file-on-server	Whether the file to be installed is available on the administration server host. Default is false.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['file-path'] = '/export/rulesets/baz.conf'
otd_installVirtualServerWebappFirewallRulesetFile(props)

otd_listCacheRules

Description

Use this command to view a list of caching rules defined for the specified virtual server.

Syntax

otd_listCacheRules(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

This command returns a list of strings each representing the name of a cache rule.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listCacheRules(props)

otd_listCertificates

Description

Use this command to list all the certificates of type 'Certificate' present in the keystore.

Syntax

otd_listCertificates(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of maps, each map representing one certificate with properties alias, subject, issuer, serial-number and key-type.

Example

props = {}
props['configuration'] = 'foo'
otd_listCertificates(props)

otd_listCompressionRules

Description

Use this command to list compression rules defined for the specified virtual server.

Syntax

otd_listCompressionRules(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

This command returns a list of strings each representing the name of a compression rule.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listCompressionRules(props)

otd_listConfigFiles

Description

Use this command to list configuration files pertaining to the specified configuration.

Syntax

otd_listConfigFiles(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of a configuration file.

Example

props = {}
props['configuration'] = 'foo'
otd_listConfigFiles(props)

otd_listConfigurations

Description

Use this command to return a list of strings each representing the name of an existing configuration.

Syntax

otd_listConfigurations()

Example

# Online
otd_listConfigurations()
 
 
# Offline
readDomain('/export/domains/otd_domain')
otd_listConfigurations()
closeDomain()

otd_listConfigurationWebappFirewallRulesetFiles

Description

Use this command to list all web application firewall rulesets defined for a configuration.

Syntax

otd_listConfigurationWebappFirewallRulesetFiles(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of a web application ruleset file.

Example

props = {}
props['configuration'] = 'foo'
otd_listConfigurationWebappFirewallRulesetFiles(props)

otd_listContentRules

Description

Use this command to list the content rules.

Syntax

otd_listContentRules(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listContentRules(props)

otd_listCrls

Description

Use this command to list all installed certificate revocation lists (CRLs).

Syntax

otd_listCrls(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_listCrls(props)

See Also

help, otd_installCrl, otd_deleteCrl

otd_listErrorPages

Description

Use this command to list all the error pages and their corresponding error codes.

Syntax

otd_listErrorPages(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listErrorPages(props)

otd_listEvents

Description

Use this command to list all scheduled events for a configuration.

Syntax

otd_listEvents(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_listEvents(props)

otd_listFailoverGroups

Description

Use this command to return a list of strings each representing the virtual-ip of an existing failover group.

Syntax

otd_listFailoverGroups(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_listFailoverGroups(props)

otd_listHttpListeners

Description

Use this command to list the names of the HTTP listeners defined for the configuration.

Syntax

otd_listHttpListeners(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of an HTTP listener.

Example

props = {}
props['configuration'] = 'foo'
otd_listHttpListeners(props)

otd_listInstances

Description

Use this command to list all instances of this configuration.

Syntax

otd_listInstances(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of an instance.

Example

#Online
props = {}
props['configuration'] = 'foo'
otd_listInstances(props)

#Offline
readDomain('/export/domains/otd_domain')
props = {}
props['configuration'] = 'foo'
otd_listInstances(props)
closeDomain()

otd_listMimeTypes

Description

Use this command to list MIME types.

Syntax

otd_listMimeTypes(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_listMimeTypes(props)

otd_listOriginServers

Description

Use this command to view a list of origin-servers defined in a pool.

Syntax

otd_listOriginServers(props)

The argument props is a dictionary that can contain the following properties, in addition to the properties described in otd_createOriginServer:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
otd_listOriginServers(props)

otd_listOriginServerPools

Description

Use this command to list origin-server pools defined for a configuration.

Syntax

otd_listOriginServerPools(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

The command returns a list of strings each representing the name of an origin server pool.

Example

props = {}
props['configuration'] = 'foo'
otd_listOriginServerPools(props)

otd_listPartitions

Description

Use this command to list all the Oracle Traffic Director partitions in a given configuration. The Oracle Traffic Director partition name should be same as the WLS partition name that it front-ends. In that case, it lists all the WLS partitions that are front-ended by Oracle Traffic Director.

Syntax

otd_listPartitions(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration. This must be the name of the configuration that is specified while registering the Oracle Traffic Director runtime with the Lifecycle Manager.	Mandatory.

Example

props = {}
props['configuration'] = 'mt'
otd_listPartitions(props)

otd_listProxyInfo

Description

Use this command to list the information about the proxy parameters configured for the route.

Syntax

otd_listProxyInfo(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
otd_listProxyInfo(props)

otd_listRequestLimits

Description

Use this command to list the request limit conditions defined for a virtual server.

Syntax

otd_listRequestLimits(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

This command returns a list of strings each representing the name of a request limit

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listRequestLimits(props)

otd_listResourceGroups

Description

Provides information about all the resource-groups that exist under a given partition. The resource-group information contains the information about all the virtual-targets that the resource-group is targeted to. The virtual-target information in turn includes the virtual-target name and the corresponding Oracle Traffic Director artifacts information such as route name, virtual-server name and origin-server-pool name.

Syntax

otd_listResourceGroups(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration. This must be the name of the configuration that is specified while registering the Oracle Traffic Director runtime with the Lifecycle Manager.	Mandatory.
partition	Name of the partition.	Mandatory.

Example

props = {}
props['configuration'] = 'mt'
props['partition'] = 'WLSPartition'
otd_listResourceGroups(props)

otd_listRoutes

Description

Use this command to list the rules defined for a virtual server.

Syntax

otd_listRoutes(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

This command returns a list of strings each representing the name of a route.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listRoutes(props)

otd_listTcpListeners

Description

Use this command to list all the TCP listeners.

Syntax

otd_listTcpListeners(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of a TCP listener.

Example

props = {}
props['configuration'] = 'foo'
otd_listTcpListeners(props)

otd_listTcpProxies

Description

Use this command to list all the TCP proxies.

Syntax

otd_listTcpProxies(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of a TCP proxy.

Example

props = {}
props['configuration'] = 'foo'
otd_listTcpProxies(props)

otd_listConfigurationVariables

Description

Use this command to list all the variables defined at the configuration level.

Syntax

otd_listConfigurationVariables(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
otd_listConfigurationVariables(props)

otd_listVirtualServers

Description

Use this command to list all virtual-servers defined for a configuration.

Syntax

otd_listVirtualServers(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

This command returns a list of strings each representing the name of a virtual server.

Example

props = {}
props['configuration'] = 'foo'
otd_listVirtualServers(props)

otd_listVirtualServerVariables

Description

Use this command to list all variables defined at the configuration level.

Syntax

otd_listVirtualServerVariables(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listVirtualServerVariables(props)

otd_listVirtualServerWebappFirewallRulesetFiles

Description

Use this command to list all web application firewall rulesets defined for a virtual server.

Syntax

otd_listVirtualServerWebappFirewallRulesetFiles(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

This command returns a list of strings each representing the name of a web application ruleset file.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
otd_listVirtualServerWebappFirewallRulesetFiles(props)

otd_rotateLog

Description

Use this command to rotate the server log and access log files. The server saves the old log files and marks the saved files with a name that includes the date and time when they were saved.

Syntax

otd_rotateLog(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
instance-name	Name of the node whose logs are to be rotated.	Mandatory.

Example

props = {}
props['instance-name'] = 'otd_foo_machine1'
otd_rotateLog(props)

See Also

help

otd_saveConfigFile

Description

Use this command to upload changes to an existing configuration file or create a new one.

Syntax

otd_saveConfigFile(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
file-path	Absolute path to the local file to be uploaded to the configuration directory.	Mandatory.
config-file	Name of the configuration file.

Example

props = {}
props['configuration'] = 'foo'
props['file-path'] = '/export/config_files/foo-obj.conf'
otd_saveConfigFile(props)

otd_setAccessLogBufferProperties

Description

Use this command to set the following properties of the access-log buffer.

Property	Description
enabled	Whether the system buffers access log updates. Range of values: true or false. Default: true.
buffer-size	Size (in bytes) of individual access log buffers. Range of values: 4096 - 1048576. Default: 8192.
direct-io	Indicates whether the file system should cache access-log writes. Range of values: true or false. The default value, false, indicates that the file system should cache access log writes. Setting the value to true indicates that the file system should not cache access log writes. The setting is purely advisory; either the server or the operating system may choose to ignore it.
max-buffers	Maximum number of access log buffers per server. Range of values: 1 - 65536. Default: 1000.
max-buffers-per-file	Maximum number of access log buffers per access log file. Range of values: 1 - 128. Default: auto-tuned.
max-age	Maximum amount of time to buffer a given access log entry. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 1.

Syntax

otd_setAccessLogBufferProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['max-buffers'] = '2000'
otd_setAccessLogBufferProperties(props)

otd_setCacheProperties

Description

Use this command to define or change the following caching properties for a configuration:

Property	Description
enabled	Defines if caching is enabled or not. Range of values: true or false. Default: true.
max-entries	Maximum number of objects for which to cache content. Range of values: 1 - 1073741824. Default: 1024.
replacement	Cache entry replacement algorithm. Range of values: lru, lfu, or false. Default: lru.
max-heap-object-size	Maximum size of response (single entry) (in bytes) to cache on the heap. If HTTP response object is bigger than max-heap-object-size, it will not be cached. Range of values: maximum size in bytes between 0 and 2147483647, inclusive. -1 indicates that there is no maximum size. Default: 524288.
max-heap-size	Maximum amount (in bytes) of heap to use for caching response objects. It should not be more than available memory or process address space. Range of values: maximum amount of address space in bytes between 0 and 1099511627776, inclusive. Default: 10485760.

Syntax

otd_setCacheProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['max-heap-space'] = '20971520'
otd_setCacheProperties(props)

See Also

help, otd_getCacheProperties

otd_setCacheRuleProperties

Description

Use this command to set the following cache rule properties:

Property	Description	Comments
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.
enabled	Specifies whether the caching rule is enabled.
max-reload-interval	Specifies the maximum time (in seconds) allowed between consecutive up-to-date checks. Range of values: any positive Integer. Default: 3600.
min-reload-time	Specifies the minimum time (in seconds) allowed between consecutive up-to-date checks of a cached document. Range of values: any positive Integer. Default: 0.
last-modified-factor	Represents the factor used in estimating the expiry time, which defines how long a document will be up-to-date based on time it was last modified. This property is used only when the explicit age of the document is not available. Range of values: any positive Integer. Default: 0.
min-object-size	The maximum size, in bytes, of any document to be cached. This setting enables users to limit the maximum size of cached documents, so that no single document can take too much space. This value cannot exceed the value of `max-heap-object-size`. Range of values: any positive Integer. Default: 0.
max-object-size	Specifies the minimum size (in bytes) of any document to be cached. Range of values: any positive Integer.
query-maxlen	Specifies the number of characters in the query string. If this property is set to 0, URIs with query strings are not cached. Range of values: any positive Integer. Default: 0.
compression	If this property value is set to true, the document is compressed before storing in the cache Range of values: true or false. Default: false.
cache-https-response	If this property value is set to true, responses from the HTTPS servers are also cached. Range of values: true or false. Default: false.

Syntax

otd_setCacheRuleProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
cache-rule	Name of the cache rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['cache-rule'] = 'cache-rule-1'
props['min-object-size'] = '512'
otd_setCacheRuleProperties(props)

otd_setCompressionRuleProperties

Description

Use this command to set or change the following properties of a compression rule for a virtual server:

Property	Description	Comments
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.
insert-vary-header	Select to insert a vary:Accept-encoding header. Range of values: true or false. Default: true.
compression-level	Specifies the compression level for the virtual server. Specifying 1 yields better speed and specifying 9 yields best compression. Range of values: 1 - 9. Default: auto-tuned.
fragment-size	Specifies the memory fragment size (in bytes) that is used by the compression library to control the compression rate. Range of values: any positive Integer. Default: 8192.

Syntax

otd_setCompressionRuleProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
compression-rule	Name of the compression rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['compression-rule'] = 'compression-rule-1'
props['compression-level'] = '8'
otd_setCompressionRuleProperties(props)

otd_setConfigurationAccessLogProperties

Description

Use this command to set access-log properties for a configuration.

Syntax

otd_setConfigurationAccessLogProperties

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
log-file	Path to the file where access log for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/access.log.
format	A format is a string that can be used to customize the format and the fields that are logged in the access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%

Example

props = {}
props['configuration'] = 'foo'
props['log-file'] = 'logs/access.log'
otd_setConfigurationAccessLogProperties(props)

otd_setConfigurationCrlProperties

Description

Use this command to define or change the following certificate revocation list (CRL) properties for a configuration:

Property

Description

enabled

Specifies whether the properties are enabled.

Range of values: true or false.

Default: true.

crl-cache-size

Size of CRL cache.

Range of values: size in bytes between 0 and 2147483647, inclusive.

Default: 52428800.

crl-path

Directory that contains dynamically updated CRL files.

Range of values: pathname.

Default: crl.

Syntax

otd_setConfigurationCrlProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['crl-cache-size'] = '104857600'
otd_setConfigurationCrlProperties(props)

See Also

help, otd_getConfigurationCrlProperties

otd_setConfigurationProperties

Description

Use this command to set the following configuration properties.

Property	Description	Comments
temp-path	Any valid directory where the server stores its temporary files.	not supported on windows
webapp-firewall-ruleset	Wildcard pattern that matches one or more path names or a path to a file containing Web Application Firewall(WAF) rules/configurations. Multiple values (separated by commas) can also be specified.	Multi-valued.
default-language	An IANA language tag specifying the default language for messages displayed to administrators and content served to clients.
negotiate-client-language	Whether the server attempts to use the Accept-language HTTP header to negotiate the content language with clients. Range of values: true or false. Default: false.
fips	Turns on FIPS-140 mode of operation for security library. Range of values: true or false. Default: false.
max-fd	Sets the maximum value of file descriptor availability. Default: 2097152.

Syntax

otd_setConfigurationProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['webapp-firewall-ruleset'] = 'rulesets'
otd_setConfigurationProperties(props)

See Also

help, otd_getConfigurationProperties

otd_setContentRuleProperties

Description

Use this command to set content rule properties.

Syntax

otd_setContentRuleProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
content-rule	Name of the content rule.	Mandatory.
uri-prefix	URI prefix that has to be mapped to a directory.
directory-path	Absolute server path and a valid directory for storing documents.
index-files	Index files are a list of welcome files or startup pages. Default: index.html,index.htm.
default-content-type	The type of the default content that you want to edit. Default: text/plain.
allow-directory-listing	Enable directory listing for a directory that does not have a welcome page. Range of values: true or false. Default: true.

Example

props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['content-rule'] = 'content-rule-1'
props['index-files'] = 'home.htm'
otd_setContentRuleProperties(props)

otd_setDnsCacheProperties

Description

Use this command to set the following Domain Name Server (DNS) cache properties:

Property

Description

enabled

Defines whether the server caches DNS lookup results.

Range of values: true or false.

Default: true.

max-age

Maximum amount of time (in seconds) to cache a DNS lookup result.

Range of values: an interval in seconds between 0.001 (1 millisecond) and 604800 (1 week), inclusive.

Default: 120.

max-entries

Maximum number of DNS lookup results to cache.

Range of values: 1 - 1048576.

Default: 1024.

Syntax

otd_setDnsCacheProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['max-age'] = '240'
otd_setDnsCacheProperties(props)

See Also

help, otd_getDnsCacheProperties

otd_setDnsProperties

Description

Use this command to set the following Domain Name Server (DNS) lookup properties for a configuration:

Property

Description

enabled

Defines whether the server does DNS lookups.

Range of values: true or false.

Default: true.

async

Whether the server uses its own asynchronous DNS resolver instead of the operating system's synchronous resolver.

Range of values: true or false.

Default: false.

timeout

Timeout (in seconds) for asynchronous DNS lookups.

Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive.

Default: 12.

Syntax

otd_setDnsProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['async'] = 'true'
props['timeout'] = '24'
otd_setDnsProperties(props)

otd_setEventProperties

Description

Use this command to set the event properties.

Property	Description	Comments
command	The command that the event executes. Range of values: the value can be restart, reconfig, rotate-log, rotate-access-log, and update-crl, or any executable command.
day-of-month	Day of the month at which this event should occur. Range of values: 1-31.
day-of-week	Day of the week at which this event should occur. Range of values: Sun, Mon, Tue, Wed, Thu, Fri, or Sat.
enabled	Whether the event is enabled at runtime. Range of values: true or false. Default: true.
interval	Time interval at which this event should occur. Range of values: an interval in seconds between 60 (1 minute) and 86400 (1 day), inclusive.
month	Month at which this event should occur. Range of values: 1-12.
time	Time, for example, 12:30, when this event is to be started. Range of values: the format of the time is `hh`:`mm`.

Syntax

otd_setEventProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
event	Name of the event.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['event'] = 'bar'
props['time'] = '10:24'
otd_setEventProperties(props)

otd_setFileCacheProperties

Description

Sets file cache properties.

Syntax

otd_setFileCacheProperties(props)

The argument props is a dictionary that can contain the following properties:

Property	Description
configuration	Name of the configuration.
enabled	Indicates whether the server caches the file content and meta information. Default: true
max-age	The maximum amount of time (in seconds) to cache the file content and/or meta information. Range of values: the range of values is 0.001-3600. Default: 30.
max-entries	The maximum number of paths for which the file content and/or meta information should be cached. Range of values: 1 - 1073741824 Default: 1024.
max-open-files	The maximum number of file descriptors the file cache will keep open. Range of values: 1 - 1073741824.
sendfile	Indicates whether the server will attempt to use the operating system's `sendfile`, `sendfilev`, `send_file`, or `TransmitFile` system call. The default value is true on Windows and false on other platforms.
copy-files	Indicates whether the server copies the cached files to a temporary directory. The default value is true on Windows and false on other platforms.
copy-path	The name of the temporary directory that the server uses when copy-files is true.
replacement	The cache entry replacement algorithm. The values can be false,lru, or lfu. Default: lru.
cache-content	Indicates whether the server caches the file content. Default: true
max-heap-file-size	The maximum size (in bytes) of files to cache on the heap. Range of values: 0-2147483647. Default: 524288.
max-heap-space	The maximum amount (in bytes) of heap to use for caching files. Range of values: 0-9223372036854775807. Default: 10485760.
max-mmap-file-size	The maximum size (in bytes) of files to mmap. Range of values: 0-2147483647. Default: 0.
max-mmap-space	The maximum amount (in bytes) of mmap address space to use for caching files. Range of values: 0-9223372036854775807. Default: 0.
buffer-size	Size of the input/output buffer used on cache misses. Range of values: 512-1048576. Default: 8192.
sendfile-size	A hint to send the file in chunks of at most this value Range of values: 0-2147483647. Default: 0.

Example

props = {}
props['configuration'] = 'foo'
props['max-age'] = '1200'
otd_setFileCacheProperties(props)

See Also

help, otd_getFileCacheProperties

otd_setHealthCheckProperties

Description

Use this command to set the following health-check properties for an origin server pool:

Property	Description
protocol	Health check mechanism. Range of values: http, tcp or command Default: origin server pool type
interval	The time interval in seconds between two health check pings. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 30
timeout	The timeout value in seconds for a ping request or connection. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 5
failover-threshold	The number of consecutive failures for marking a server down. Range of values: 1 - 256 Default: 3
request-method	The method used in HTTP ping requests. Range of values: OPTIONS or GET Default: OPTIONS
request-uri	The URI to use for HTTP health check request. Range of values: URI (virtual directory) that begins with /. Default: /
response-code-match	A modified regular expression to specify what response status codes are acceptable for a healthy origin server. The expression is a union of 3-character patterns that contain only digits or 'x', where 'x' stands for any digit. For example, the following 3 expressions are valid: 200, 2xx or 304, 1xx or 2xx or 3xx or 4xx. If the parameter is not specified, all codes except 5xx server errors are considered acceptable.
response-body-match	A regular expression used to match the HTTP response body in order to determine if the server is healthy. The origin server will be marked UP if the ping response matches the regular expression (if this parameter is specified) and the response status code is not a 5xx server error (if this parameter is not specified). If response body match is enabled, request method should be set to GET.
response-body-match-size	The maximum length of response body to be matched. Range of values: size in bytes between 0 and 2147483647, inclusive. Default: 2048.
dynamic-server-discovery	Indicates whether the server caches the file content. Range of values: true or false. Default: false.
command	The full path of the external health check executable.

Syntax

otd_setHealthCheckProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['response-body-match-size'] = '4096'
otd_setHealthCheckProperties(props)

See Also

help, otd_getHealthCheckProperties

otd_setHttpListenerProperties

Description

Use this command to set the following HTTP listener properties:

Property	Description	Comments
enabled	Whether the listener is enabled at runtime. Range of values: true or false. Default: true.
ip	IP address on which to listen. Range of values: *, a hostname, or an IP address.
port	Port on which to listen. Range of values: port number between 1 and 65535, inclusive.
acceptor-threads	Number of threads dedicated to accepting connections received by this listener. Range of values: 1 - 128. Default: auto-tuned.
server-name	Default server name. May include a scheme (for example, http://) prefix and port (for example, :80) suffix . Can be a hostname, fully qualified domain name, IP address, or a URL prefix that contains one. The URL prefix must not specify a path.
blocking-io	Whether the server uses blocking IO. Range of values: true or false. Default: false.
blocking-accept	Enables/Disables blocking of the server Listen Socket while retaining client end points as non blocking (useful when MaxProcs > 1). Range of values: true or false. Default: false.
handle-protocol-mismatch	Range of values: true or false. Default: true.
family	The socket family used to connect to the origin server. Range of values: default, inet, inet6, or inet-sdp Default: auto-tuned.
listen-queue-size	Maximum size of the operating system listen queue backlog. Range of values: 1 - 1048576. Default: 128.
receive-buffer-size	Size (in bytes) of the operating system socket receive buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
send-buffer-size	Size (in bytes) of the operating system socket send buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
max-requests-per-connection	Maximum number of keep-alive requests that will be handled per HTTP connection after which the keep-alive connection will be closed. -1 indicates no limit. Range of values: 1-, any positive Integer Default: -1.
default-virtual-server-name	Name of the virtual server that processes requests that did not match a host.
description	Description of the HTTP listener for the administrator's reference.

Syntax

otd_setHttpListenerProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory
http-listener	Name that uniquely identifies the HTTP listener.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
props['max-requests-per-connection'] = '1024'
otd_setHttpListenerProperties(props)

otd_setHttpProperties

Description

Use this command to set the following HTTP properties for a configuration:

Property	Description
server-header	Specifies the server header information such as server software and version. Default: Oracle-Traffic-Director/<version>
etag	Indicates if the server includes an Etag header field in its responses. Range of values: true or false. Default: true.
request-header-buffer-size	Size (in bytes) of buffer used to read HTTP request header. Range of values: size in bytes between 0 and 2147483647, inclusive. Default: 8192.
strict-request-headers	Whether the server rejects certain malformed HTTP request headers Range of values: true or false. Default: false.
websocket-strict-upgrade	Enables/Disables the strict RFC 6455 adherence during the WebSocket upgrade request. Range of values: true or false. Default: false.
discard-misquoted-cookies	Whether to discard misquoted cookies. Range of values: true or false. Default: true.
max-request-headers	Maximum number of header fields to allow in an HTTP request header. Range of values: 1 - 512. Default: 64.
body-buffer-size	Defines the maximum size of the request body content that OTD will expose via the `$body` variable in `obj.conf`. Range of values: size in bytes between 0 and 2147483647, inclusive Default: 1024.
output-buffer-size	Size (in bytes) of buffer used to buffer HTTP responses. Range of values: size in bytes between 0 and 2147483647, inclusive Default: 8192.
max-unchunk-size	Maximum size (in bytes) of a chunked HTTP request body the server will unchunk. Range of values: size in bytes between 0 and 2147483647, inclusive Default: 8192.
unchunk-timeout	Maximum time (in seconds) the server will spend waiting for a chunked HTTP request body to arrive. Range of values: an interval in seconds between 0 and 3600 (1 hour), inclusive. -1 indicates no timeout. Default: 60.
io-timeout	Maximum time (in seconds) server will wait for an individual packet. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 30.
request-body-timeout	Maximum time (in seconds) server will wait for the complete HTTP request body. Range of values: an interval in seconds between 0 and 604800 (1 week), inclusive. -1 indicates no timeout. Default: -1.
request-header-timeout	Maximum time (in seconds) server will wait for the complete HTTP request header. Range of values: an interval in seconds between 0 and 3600 (1 hour), inclusive. -1 indicates no timeout. Default: 30.
favicon	Whether the server replies to requests for favicon.ico with its own built in icon file. Range of values: true or false. Default: true.
ecid	Whether the server generates/propagates Execution Context and logs it with its error log. Range of values: true or false. Default: true.

Syntax

otd_setHttpProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set as described above):

Property	Description	Comments
configuration	Name of the configuration.

Example

props = {}
props['configuration'] = 'foo'
props['unchunk-timeout'] = '120'
otd_setHttpProperties(props)

See Also

help, otd_getHttpProperties

otd_setHttpListenerSslProperties

Description

Use this command to set the SSL properties for a listener. SSL is a software library establishing a secure connection between the client and server. SSL is used to implement HTTPS, the secure version of HTTP. You can set the following properties:

Property	Description
enabled	Whether SSL/TLS is enabled at runtime. Range of values: true or false. Default: true.
client-auth	Client certificate authentication method. Range of values: one of required, optional, or false. Default: false.
client-auth-timeout	Timeout (in seconds) after which client authentication handshake fails. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 60.
max-client-auth-data	Maximum amount of application-level data to buffer during a client authentication handshake. Range of values: size in bytes between 0 and 2147483647, inclusive. Default: 1048576.
ssl3	Whether SSL3 connections are accepted. Range of values: true or false. Default: false.
tls10	Whether TLS 1.0 connections are accepted. Range of values: true or false. Default: true.
tls11	Whether TLS 1.1 connections are accepted. Range of values: true or false. Default: true.
tls12	Whether TLS 1.2 connections are accepted. Range of values: true or false. Default: true.
ciphers	Comma separated list of ciphers that must be enabled. Range of values: one (or) more ciphers that are supported. For a list of supported ciphers, see Ciphers. Default: all supported ciphers are enabled by default.
override-cipher-order	Whether cipher order should be overridden. Setting this flag to true will make OTD select the cipher suites in the order specified in server.xml instead of the order specified in the client's ClientHello message. Range of values: true or false. Default: false.
supported-ciphers	List of supported ciphers. This is a read-only property. Range of values: for a list of supported ciphers, see Ciphers. Default: N.A.
server-cert-alias	Comma separated list of server certificate aliases present in the keystore. Maximum of one RSA server certificate alias and one EC server certificate alias.

Note:

The command otd_setHttpListenerSslProperties will enable ssl implicitly if server-cert-alias is set for the first time. It will enable ssl, even though ssl=enabled is not explicitly set.

Syntax

otd_setHttpListenerSslProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory
http-listener	Name of the HTTP listener.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['http-listener'] = 'http-listener-1'
props['tls10'] = 'false'
otd_setHttpListenerSslProperties(props)

See Also

help, otd_getTcpListenerSslProperties

otd_setHttpThreadPoolProperties

Description

Use this command to set the thread-pool properties for a configuration. The min-threads and max-threads properties configure the threads used to process HTTP requests. You can use thread pools to allocate a certain number of threads to a specific service. By defining a pool with the maximum number of threads as 1, only one request is allowed to the specified service function.

You can set the following properties:

Property	Description
enabled	Whether the thread pool is enabled or not. Range of values: true or false. Default: true.
queue-size	Maximum number of concurrent HTTP connections that can be queued waiting for processing. Range of values: 1 - 1048576. Default: auto-tuned.
min-threads	Minimum number of HTTP request processing threads. Range of values: 1 - 20480. Default: auto-tuned.
max-threads	Maximum number of HTTP request processing threads. Range of values: 1 - 20480. Default: auto-tuned.
stack-size	Stack size (in bytes) for HTTP request processing threads. Range of values: stack size in bytes between 8192 and 268435456, inclusive. 0 indicates that the platform-specific default stack size should be used. Default: 262144.

Syntax

otd_setHttpThreadPoolProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['stack-size'] = '8192'
otd_setHttpThreadPoolProperties(props)

See Also

help, otd_getHttpThreadPoolProperties

otd_setKeepaliveProperties

Description

Sets the following keep-alive subsystem properties:

Property	Description
enabled	Whether the server supports keep-alive connections. Range of values: true or false. Default: true.
threads	Number of keep-alive subsystem threads. Range of values: 1 - 256. Default: auto-tuned.
max-connections	Maximum number of concurrent keep-alive connections the server will support. Range of values: 1 - 1048576. Default: auto-tuned.
timeout	Timeout (in seconds) after which inactive keep-alive connection may be closed. Range of values: an interval in seconds between 0.001 (1 millisecond) and 3600 (1 hour), inclusive. -1 indicates no timeout. Default: 30.
poll-interval	Interval (in seconds) between polls. Range of values: an interval in seconds between 0.001 and 1, inclusive. Default: 0.001.

Syntax

otd_setKeepaliveProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['threads'] = '128'
otd_setKeepaliveProperties(props)

See Also

help, otd_getKeepaliveProperties

otd_setLogProperties

Description

Use this command to set the following log properties:

Property	Description
log-stdout	Whether the server logs data that applications write to stdout. Range of values: true or false. Default: true.
log-stderr	Whether the server logs data that applications write to stderr. Range of values: true or false. Default: true.
log-virtual-server-name	Whether the server includes the virtual server name in log messages. Range of values: true or false. Default: false.
create-console	(Windows only) Whether the server creates a console window. Range of values: true or false. Default: false.
log-to-console	Whether the server writes log messages to the console. Range of values: true or false. Default: true.
log-to-syslog	Whether the server writes log messages to syslog (Unix) or the Event Viewer (Windows). Range of values: true or false. Default: false.
archive-command	Command executed after the server rotates a log file. The file name of the log file, after rotation, is passed as an argument to the archive command.
log-level	Log verbosity for the server as a whole. Range of values: valid log levels are INCIDENT_ERROR:1, ERROR:1, ERROR:16, ERROR:32, WARNING:1, NOTIFICATION:1, TRACE:1, TRACE:16, and TRACE:32. TRACE:32 (finest) is the most verbose while INCIDENT_ERROR:1 (catastrophe) is the least verbose. Default: NOTIFICATION:1.
log-file	Log file for the server as a whole. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/server.log.

Syntax

otd_setLogProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['log-level'] = 'TRACE:32'
otd_setLogProperties(props)

See Also

help, otd_getLogProperties, displayLogs

otd_setOriginServerPoolSslProperties

Description

Use this command to set the SSL properties of the origin server pool.

Property	Description
enabled	Whether SSL/TLS is enabled at runtime. Range of values: true or false. Default: true.
ssl3	Whether SSL3 connections are accepted. Range of values: true or false. Default: false.
tls10	Whether TLS 1.0 connections are accepted. Range of values: true or false. Default: true.
tls11	Whether TLS 1.1 connections are accepted. Range of values: true or false. Default: true.
tls12	Whether TLS 1.2 connections are accepted. Range of values: true or false. Default: true.
validate-server-cert	Only applies to outgoing connections. Validate SSL certificate hostname on/off flag. Range of values: true or false. Default: true.
ciphers	Comma separated list of ciphers that must be enabled. Range of values: one (or) more ciphers that are supported. For a list of supported ciphers, see Ciphers. Default: all supported ciphers are enabled by default.
supported-ciphers	List of supported ciphers. This is a read-only property. Range of values: for a list of supported ciphers, see Ciphers. Default: n/a
client-cert-alias	A valid client certificate alias present in the keystore. Maximum of one RSA server certificate alias and one EC server certificate alias.

Syntax

otd_setOriginServerPoolSslProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory
origin-server-pool	Name of the origin server pool.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['tls10'] = 'false'
otd_setOriginServerPoolSslProperties(props)

See Also

help

otd_setOriginServerPoolProperties

Description

Use this command to set the following origin-server pool properties:

Property	Description	Comments
family	The socket family used to connect to servers in this pool. Range of values: default, inet, inet6, or inet-sdp. Default: auto-tuned.
load-distribution	Algorithm that is used for load distribution of this server pool. Range of values: round-robin, least-connection-count, or least-response-time. Default: least-connection-count.
queue-timeout	Timeout (in seconds) for which the request waits in the queue for a connection to an origin-server. After the timeout, request is rejected. Range of values: 0.001 - 3600. Default: 30.
proxy-server	Name of the proxy-server in the form of host:port.

Syntax

otd_setOriginServerPoolProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
origin-server-pool	Name of the origin server pool.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['load-distribution'] = 'least-connection-count'
otd_setOriginServerPoolProperties(props)

otd_setOriginServerProperties

Description

Use this command to set the following properties of an origin-server:

Property	Description
mode	Mode.of this origin server. Range of values: enabled, disabled, draining. Default: enabled.
weight	Load distribution weight for this origin server. Range of values: 1 - 1000. Default: 1.
backup	The parameter specifies if the origin server is a backup server. Range of values: true or false. Default: false.
max-connections	The maximum number of concurrent connections to a server. -1 indicates that there is no maximum. Range of values: -1, 1 - 1048576. Default: -1.
ramp-up-time	The time in seconds to ramp the sending rate up to the capacity of a newly up origin server. If the parameter is not specified, request rate accelerating will not be activated for the server. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 0.001.
max-requests-per-connection	Maximum limit on times a connection to origin server can be reused for different requests. -1 indicates there is no limit. Range of values: -1, 1 - 2147483647. Default: -1.
max-request-bps	Total bandwidth limit in byte/second enforced on request. Range of values: 0 - 1099511627776. Default: 0.
max-response-bps	Total bandwidth limit in byte/second enforced on response. Range of values: 0 - 1099511627776. Default: 0.
bandwidth-queue-timeout	Request is aborted when it had to wait in the queue for bandwidth for this much time in second. Range of values: 0 - 86400. Default: 60.

Syntax

otd_setOriginServerProperties(props)

The argument props is a dictionary that can contain the following properties (in addition to the properties that can be set):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory
origin-server-pool	Name of the origin server pool.	Mandatory
host	IP address/Host name of the origin server.	Mandatory
port	Port number of the origin server.	Mandatory

Example

props = {}
props['configuration'] = 'foo'
props['origin-server-pool'] = 'origin-server-pool-1'
props['host'] = 'www.example.com'
props['port'] = '12345'
props['ramp-up-time'] = '1200'
otd_setOriginServerProperties(props)

otd_setPartitionAccessLogProperties

Description

Use this command to set the access-log properties for a partition.

Property	Description
log-file	Path to the file where access logs for this partition will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/$PARTITION_NAME.log
format	A format is a string that can be used to customize the format and the fields that are logged in the partition access log. Default: %Ses->client.ip% - %Req->vars.auth-user% %SYSDATE% "%Req->reqpb.clf-request%" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length% %Req->vars.ecid% %Req->vars.origin-server%

Syntax

otd_setPartitionAccessLogProperties (props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration. This must be the name of the configuration that is specified while registering the Oracle Traffic Director runtime with the Lifecycle Manager.	Mandatory.
partition	Name of the partition.	Mandatory.

Example

props = {}
props['configuration'] = 'mt'
props['partition'] = 'WLSPartition'
props['log-file'] = 'logs/WLSPartition.log'
otd_setPartitionAccessLogProperties(props)

otd_setRequestLimitProperties

Description

Use this command to set the following request limit properties for a virtual server:

Property	Description	Comments
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.
max-rps	Maximum number of requests that the virtual server can receive per second. Range of values: any positive Integer.
max-connections	Maximum number of concurrent matching connections. Range of values: any positive Integer.
queue-size	Maximum number of requests to be queued in the bucket. Range of values: any positive Integer. Default: 0.
timeout	Request is aborted when it had to wait in the queue for this much time in second. Range of values: 1 - 86400. Default: 60.
error-code	HTTP status code to return for blocked requests. Range of values: 400 - 599. Default: 503.
monitor-attribute	Request attribute to monitor.

Syntax

otd_setRequestLimitProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
request-limit	Name of the request limit rule.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['request-limit'] = 'request-limit-1'
props['max-connections'] = '1024'
otd_setRequestLimitProperties(props)

otd_setRouteProperties

Description

Use this command to set the following route properties for a virtual server.

Property	Description	Comments
condition	A condition is an expression which if evaluates to true, will result in the rule being executed. Conditions are constructed from literals, variables, functions and operators.	`condition` cannot be set for the `uri-prefix` based routes.
uri-prefix	A uri-prefix is a URI path with wildcard patterns. If a request URI matches with the uri-prefix then the rule will be executed.	`uri-prefix` cannot be set for the `condition` based routes.
origin-server-pool	Name of the origin server pool for this route.
offline-check-interval	Specifies the offline check interval.
server	Specifies the server name.
sticky-cookie	Name of the cookie that causes subsequent requests to stick to a particular origin server. Default: JSESSIONID.
sticky-param	Name of a URI parameter to inspect for route information. When the URI parameter is present in a request URI and its value contains a colon :, followed by a route ID, the request will 'stick' to the origin server identified by that route ID. Default: jsessionid.
route-header	Name of the HTTP request header that is used to communicate route IDs to the origin servers. Default: Proxy-jroute.
route-cookie	Name of the cookie generated by the server when it encounters a sticky-cookie cookie in a response. The route-cookie parameter stores the route ID that enables the server to direct subsequent requests back to the same origin server. Default: ORA_OTD_JROUTE.
rewrite-headers	List of HTTP request headers separated by commas.
use-keep-alive	Whether the HTTP client can use existing persistent connections for all types of requests. Range of values: true of false. Default: true.
keep-alive-timeout	Maximum number (in seconds) to retain persistent connectivity. Range of values: any positive Integer. Default: 29.
timeout	Maximum number (in seconds) that a connection can be in a idle state. Range of values: any positive Integer. Default: 300.
always-use-keep-alive	Whether the HTTP client can reuse existing connections for all types of requests. Range of values: true of false. Default: false.
protocol	Specifies the HTTP protocol version.
proxy-agent	Whether the proxy server product name and version has to be forwarded to the origin servers.
from	URI prefix to map. The prefix must not contain trailing slashes.
to	URL prefix to which the request should be mapped. The prefix must not contain trailing slashes.
log-headers	If true, the HTTP request and response headers for all connections with origin servers will be logged in the server log file. Range of values: true or false. Default: false.
websocket-upgrade-enabled	Specifies whether standard HTTP(S) connections should be upgraded to bi-directional, full-duplex WebSocket connections. Range of values: true or false. Default: true.
websocket-idle-timeout	The maximum number of seconds a connection can be idle. If no value is specified, then the timeout from the TCP connection thread pool (300 seconds) is used. Range of values: -1 or 0 - 3600.
buffer-size	The size of the buffer that is used by the server to store data before it is sent to the client. Range of values: any positive Integer. Default: 16384.
priority	The priority of the request. Range of values: high, normal, low. Default: normal.

Syntax

otd_setRouteProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.
route	Name of the route.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['route'] = 'route-1'
props['websocket-idle-timeout'] = '1200'
otd_setRouteProperties(props)

otd_setSnmpProperties

Description

Use this command to enable and define these settings for the SNMP subagents.

Property	Description
enabled	Whether SNMP is enabled. Range of values: true or false. Default: true.
description	Description of the server, or unknown.
organization	Organization responsible for the server, or unknown.
location	Location of the server, or unknown.
contact	Contact information of the person responsible for the server, or unknown.

Syntax

otd_setSnmpProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['organization'] = 'bar'
otd_setSnmpProperties(props)

otd_setSslSessionCacheProperties

Description

Use this command to set the SSL session cache properties.

Property

Description

enabled

Whether the server caches SSL/TLS sessions.

Range of values: true or false.

Default: true.

max-entries

Maximum number of SSL/TLS sessions the server will cache.

Range of values: 1 - 524288.

Default: 10000.

max-ssl3-tls-session-age

Maximum amount of time to cache an SSL3/TLS session.

Range of values: 1 - 86400.

Default: 86400.

Syntax

otd_setSslSessionCacheProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['max-entries'] = '20000'
otd_setSslSessionCacheProperties(props)

See Also

help, otd_getSslSessionCacheProperties

otd_setStatsProperties

Description

Use this command to set these properties of the statistics collection subsystem.

Property

Description

enabled

Whether the server collects statistics at runtime.

Range of values: true or false.

Default: true.

interval

Interval (in seconds) at which statistics are updated.

Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive.

Default: 5.

profiling

Whether performance buckets, used to track NSAPI function execution time, are enabled.

Range of values: true or false.

Default: true.

Syntax

otd_setStatsProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['interval'] = '10'
otd_setStatsProperties(props)

See Also

help, otd_getStatsProperties

otd_setTcpAccessLogProperties

Description

Use this command to set the properties of the TCP access log.

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
log-file	Path to the file where the TCP access log for this configuration will be stored. Default: $DOMAIN_HOME/servers/$INSTANCE_NAME/logs/tcp-access.log

Syntax

otd_setTcpAccessLogProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['log-file'] = 'logs/tcp-access.log'
otd_setTcpAccessLogProperties(props)

See Also

help, otd_getTcpAccessLogProperties

otd_setTcpListenerProperties

Description

Use this command to set the TCP listener properties.

Property	Description
port	Port on which to listen. Range of values: port number between 1 and 65535, inclusive.
ip	IP address on which to listen. Range of values: , a hostname, or an IP address. Default: .
acceptor-threads	Acceptor threads for this listening end point. Range of values: 1 - 128. Default: auto-tuned.
enabled	Whether the instance is enabled. Range of values: true or false. Default: true.
description	Description of the TCP listener for the administrator's reference.
family	Protocol family. Range of values: default, inet, inet6, or inet-sdp. Default: auto-tuned.
listen-queue-size	Maximum size of the operating system listen queue backlog. Range of values: 1 - 1048576. Default: 128.
receive-buffer-size	Size (in bytes) of the operating system socket receive buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
send-buffer-size	Size (in bytes) of the operating system socket send buffer. Range of values: size in bytes between 0 and 2147483647, inclusive.
blocking-accept	Enables/Disables blocking of the server Listen Socket while retaining client end points as non blocking (useful when `MaxProcs` > 1). Range of values: true or false. Default: false.
tcp-proxy	Name that identifies the exposed TCP service. Name can consist of one or more characters, whitespace is not permitted.

Syntax

otd_setTcpListenerProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name of the TCP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
props['listen-queue-size'] = '256'
otd_setTcpListenerProperties(props)

otd_setTcpListenerSslProperties

Description

Use this command to set the Secure Sockets Layer (SSL) properties for a TCP listener:

Property	Description
enabled	Whether SSL/TLS is enabled at runtime. Range of values: true or false. Default: true.
client-auth	Client certificate authentication method. Range of values: one of required, optional, or false. Default: false.
client-auth-timeout	Timeout (in seconds) after which client authentication handshake fails. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 60.
max-client-auth-data	Maximum amount of application-level data to buffer during a client authentication handshake. Range of values: size in bytes between 0 and 2147483647, inclusive. Default: 1048576.
ssl3	Whether SSL3 connections are accepted. Range of values: true or false. Default: false.
tls10	Whether TLS 1.0 connections are accepted. Range of values: true or false. Default: true.
tls11	Whether TLS 1.1 connections are accepted. Range of values: true or false. Default: true.
tls12	Whether TLS 1.2 connections are accepted. Range of values: true or false. Default: true.
ciphers	Comma separated list of ciphers that must be enabled. Range of values: one (or) more ciphers that are supported. For a list of supported ciphers, see Ciphers. Default: all supported ciphers are enabled by default.
override-cipher-order	Whether cipher order should be overridden. Setting this flag to true will make OTD select the cipher suites in the order specified in server.xml instead of the order specified in the client's ClientHello message. Range of values: true or false. Default: false.
supported-ciphers	List of supported ciphers. This is a read-only property. Range of values: for a list of supported ciphers, see Ciphers. Default: N.A.
server-cert-alias	Comma separated list of server certificate aliases present in the keystore. Maximum of one RSA server certificate alias and one EC server certificate alias.

Syntax

otd_setTcpListenerProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-listener	Name of the TCP listener.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-listener'] = 'tcp-listener-1'
props['tls10'] = 'false'
otd_setTcpListenerSslProperties(props)

See Also

help, otd_getTcpListenerSslProperties

otd_setTcpProxyProperties

Description

Use this command to set the following properties of the TCP proxy for a configuration:

Property

Description

enabled

Whether the TCP service is enabled.

Range of values: true or false.

Default: true.

session-idle-timeout

Maximum timeout in seconds for load balancer to wait for receiving/sending data in the session.

Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive.

origin-server-pool-name

Name of an existing server pool that provides the TCP service.

Syntax

otd_setTcpProxyProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set (as described above):

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
tcp-proxy	Name of the TCP proxy.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['tcp-proxy'] = 'bar'
props['session-idle-timeout'] = '1200'
otd_setTcpProxyProperties(props)

otd_setTcpThreadPoolProperties

Description

Use this command to set the thread-pool properties of a configuration. The properties configure the threads used to proxy data for upgraded WebSocket connections and generic TCP connections. You can use TCP thread pools to allocate a certain number of threads to a specific service.

You can set the following properties:

Property	Description
enabled	Whether the pool is enabled or not. Range of values: true or false. Default: true.
threads	Number of threads in the proxy thread-pool. Range of values: 1 - 512. Default: auto-tuned.
max-connections	Maximum number of connection pairs the server will support. Range of values: 1 - 1048576. Default: auto-tuned.
timeout	Idle timeout (in seconds) after which connection pairs will be closed. Value will be overridden by the TCP or WebSocket subsystem. Range of values: an interval in seconds between 0.001 (1 millisecond) and 3600 (1 hour), inclusive. -1 indicates no timeout. Default: 300.
poll-interval	Interval (in seconds) between polls. Range of values: an interval in seconds between 0.001 and 1, inclusive. Default: 0.01.
buffer-size	Size of the buffer in bytes used for transferring data. Range of values: 512 - 1048576. Default: 16384.
stack-size	Stack size in bytes for each thread. Range of values: stack size in bytes between 8192 and 268435456, inclusive. 0 indicates that the platform-specific default stack size should be used. Default: 32768.

Syntax

otd_setTcpThreadPoolProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['stack-size'] = '8192'
otd_setTcpThreadPoolProperties(props)

See Also

help, otd_getTcpThreadPoolProperties

otd_setVirtualServerProperties

Description

Use this command to set the properties of a virtual-server.

Property	Description
enabled	Whether the virtual server is enabled at runtime. Range of values: true or false. Default: true.
canonical-server-name	Canonical hostname of the virtual server (requests using a different hostname will be redirected to this hostname). Can be a Hostname, fully qualified domain name, ip address, or a url prefix that contains one. the url prefix must not specify a path.
log-file	Log file for the virtual server.
http-listener-name	Name of an HTTP listener associated with one or more of the virtual server's host hostnames. Multiple comma separated values can be specified.
host	Hostname the virtual server services. Multiple comma separated values can be specified where each value can be a wildcard pattern that matches one or more hostnames.
default-language	An IANA language tag specifying the default language for messages displayed to administrators and content served to clients.
negotiate-client-language	Whether the server attempts to use the Accept-language HTTP header to negotiate the content language with clients. Range of values: true or false. Default: false.

Syntax

otd_setVirtualServerProperties(props)

The argument props is a dictionary that can contain the following properties in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['http-listener-name'] = 'http-listener-1'
otd_setVirtualServerProperties(props)

otd_setVirtualServerSslProperties

Description

Use this command to set the SSL properties for a virtual server.

Property	Description
enabled	Whether SSL/TLS is enabled at runtime. Range of values: true or false. Default: true.
client-auth	Client certificate authentication method. Range of values: one of required, optional, or false. Default: false.
client-auth-timeout	Timeout (in seconds) after which client authentication handshake fails. Range of values: an interval in seconds between 0.001 and 3600 (1 hour), inclusive. Default: 60.
max-client-auth-data	Maximum amount of application-level data to buffer during a client authentication handshake. Range of values: size in bytes between 0 and 2147483647, inclusive. Default: 1048576.
ssl3	Whether SSL3 connections are accepted. Range of values: true or false. Default: false.
tls10	Whether TLS 1.0 connections are accepted. Range of values: true or false. Default: true.
tls11	Whether TLS 1.1 connections are accepted. Range of values: true or false. Default: true.
tls12	Whether TLS 1.2 connections are accepted. Range of values: true or false. Default: true.
ciphers	Comma separated list of ciphers that must be enabled. Range of values: one (or) more ciphers that are supported. For a list of supported ciphers, see Ciphers. Default: all supported ciphers are enabled by default.
override-cipher-order	Whether cipher order should be overridden. Setting this flag to true will make OTD select the cipher suites in the order specified in server.xml instead of the order specified in the client's ClientHello message. Range of values: true or false. Default: false.
supported-ciphers	List of supported ciphers. This is a read-only property. Range of values: for a list of supported ciphers, see Ciphers. Default: N.A.
server-cert-alias	Comma separated list of server certificate aliases present in the keystore. Maximum of one RSA server certificate alias and one EC server certificate alias.

Syntax

otd_setVirtualServerSslProperties(props)

The argument props is a dictionary that can contain the following properties in addition to those properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['tls10'] = 'false'
otd_setVirtualServerSslProperties(props)

See Also

help, otd_getVirtualServerSslProperties

otd_setWalletPassword

Description

Sets the password on a wallet.

Syntax

otd_setWalletPassword(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
password	Password consisting of a minimum length of 8 characters and contain alphabetic characters combined with numbers or special characters.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['password'] = 'barBazqux#'
otd_setWalletPassword(props)

otd_setWebappFirewallProperties

Description

Use this command to set the following properties of a web application firewall:

Property	Description	Comments
ruleset	Path to a file containing Web Application Firewall (WAF) rules/configuration	Multi-valued.

Syntax

otd_setWebappFirewallProperties(props)

The argument props is a dictionary that must contain the following keys in addition to the properties that can be set:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-server	Name of the virtual server.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-server'] = 'bar'
props['ruleset'] = 'rulesets'
otd_setWebappFirewallProperties(props)

otd_startFailover

Description

Use this command to start the failover daemon on the local machine. Since the failover daemon needs to run as root, you should execute this command should with sudo privileges on the host on which the primary/backup instance of the failover group is running to start the failover on the instance.

This command can only be run in offline mode.

Syntax

otd_startFailover(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
domain-home	Path to the directory that contains the Oracle Traffic Director domain.	Mandatory.
instance-name	Name of the primary/backup Oracle Traffic Director instance which is part of the failover group.	Mandatory.
log-verbose	Whether keepalived should be started in verbose log level mode. Default: false.

Example

props = {}
props['domain-home'] = '/export/domains/otd_domain'
props['instance-name'] = 'otd_abc123.example.com'
otd_startFailover(props)

otd_startSnmpSubAgent

Description

Use this command to start the Oracle Traffic Director Simple Network Management Protocol (SNMP) sub-agent on the specified machine.

Syntax

otd_startSnmpSubAgent(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
machine-name	Name specified while creating the machine in the Oracle WebLogic Server console, corresponding to the host name of the machine on which the Oracle Traffic Director instance is running.	Mandatory for Online, not valid for Offline.
domain-home	Path to the directory that contains the Oracle Traffic Director domain.	Mandatory for Offline, not valid for Online.

Example

# Online
props = {}
props['machine-name'] = 'abc123.example.com'
otd_startSnmpSubAgent(props)
 
# Offline
props = {}
props['domain-home'] = '/export/domains/otd_domain'
otd_startSnmpSubAgent(props)

otd_stopFailover

Description

Use this command to stop the failover daemon on the local machine. Since the failover daemon needs to run as root, execute this command with sudo privileges on the host on which the primary/backup instance of the failover group is running to stop the failover on the instance.

This command can only be run in offline mode.

Syntax

otd_stopFailover(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
domain-home	Path to the directory that contains the Oracle Traffic Director domain.	Mandatory.
instance	Name of the primary/backup Oracle Traffic Director instance which is part of the failover group.	Mandatory.

Example

props = {}
props['domain-home'] = '/export/otd_domain'
props['instance'] = 'otd_abc123.example.com'
otd_stopFailover(props)

otd_stopSnmpSubAgent

Description

Use this command to stop the Simple Network Management Protocol (SNMP) sub-agent on the specified machine.

Syntax

otd_stopSnmpSubAgent(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
machine-name	Name specified while creating the machine in the Oracle WebLogic Server console, corresponding to the host name of the machine on which the Oracle Traffic Director instance is running.	Mandatory for Online, not valid for Offline.
domain-home	Path to the directory that contains the Oracle Traffic Director domain.	Mandatory for Offline, not valid for Online.

Example

# Online
props = {}
props['machine-name'] = 'host.example.com'
otd_stopSnmpSubAgent(props)
 
# Offline
props = {}
props['domain-home'] = '/export/domains/otd_domain'
otd_stopSnmpSubAgent(props)

otd_toggleFailoverGroupPrimary

Description

Use this command to toggle the primary and backup instances in a failover group. If the failover is running already, you should execute the stopFailover and startfailover scripts on the hosts where the instances are running. This is to manually toggle the nodes. If this command is not executed, the instances will not be toggled. Also, when you execute otd_getFailoverGroupProperties, the result will show the configured primary and the backup instances, which will not be the same as the runtime primary and backup instances.

Syntax

otd_toggleFailoverGroupPrimary(props)

The argument props is a dictionary that can contain the following properties:

Property	Description	Comments
configuration	Name of the configuration.	Mandatory.
virtual-ip	Virtual IP that uniquely identifies the failover group.	Mandatory.

Example

props = {}
props['configuration'] = 'foo'
props['virtual-ip'] = '192.0.2.1'
otd_toggleFailoverGroupPrimary(props)

pullComponentChanges

Description

Pulls configuration files from a particular instance of the configuration to the config store in the admin server. The pulled configuration files overwrite their corresponding server versions and any pending changes (conflicting with the pulled configuration files) on the admin server are lost.

After executing this command, you must execute the command enableOverwriteComponentChanges before activate. Otherwise, activate will fail because of the local modifications on the instance.

Note:

This command can only be executed from an open edit session. You must execute the command activate for the pulled configuration changes to be deployed across all the instances of the configuration.

Syntax

pullComponentChanges(<instance_name>)

The argument <instance_name> is the name of the instance and is mandatory.

Example

startEdit()
 
pullComponentChanges('otd_test.example.com')
pull component otd_test.example.com changes on machine example.com:
add OTD/test/config/foo.conf
edit OTD/test/config/server.xml
edit OTD/test/config/test-obj.conf
remove OTD/test/config/obj.conf
 
activate()

resync/resyncAll

Description

Over writes the modifications on an instance or all instances with their corresponding server versions from the admin server.

Syntax

resync(<instance_name>) / resyncAll()

The argument <instance_name> is the name of the instance and is mandatory.

Note:

This command cannot be executed from an open edit session. See enableOverwriteComponentChanges and activate for overriding instance changes within an open edit session.

Example

# resync
showComponentChanges('otd_test.example.com')
add OTD/test/config/bar.conf 1970.01.01-05:30:00 2014.11.07-17:35:15
edit OTD/test/config/proxyvs.obj.conf 2014.11.07-17:36:49 1970.01.01-05:29:59
edit OTD/test/config/server.xml 2014.11.07-17:36:49 2014.11.07-17:37:22
remove OTD/test/config/test-obj.conf 2014.11.07-17:36:49 1970.01.01-05:30:00
 
resync('otd_test.example.com')
 
showComponentChanges('otd_test.example.com')
component otd_test.example.com changes on machine example.com: no change found.
 
# resyncAll
showComponentChanges()
component otd_test.example.com changes on machine example.com:
add OTD/test/config/baz.conf 1970.01.01-05:30:00 2014.11.07-17:42:57
component otd_origin-server-1.example.com changes on machine example.com:
add OTD/origin-server-1/config/bar.conf 1970.01.01-05:30:00 2014.11.07-17:43:34
 
resyncAll()
  
showComponentChanges()
component otd_test.example.com changes on machine example.com: no change found.
component otd_origin-server-1.example.com changes on machine example.com: no change found.

showComponentChanges

Description

Lists all the configuration file modifications on instances.

Syntax

showComponentChanges(<instance_name>)

The argument <instance_name> is the name of the instance and is optional. If not specified, the command will display the modifications across all the instances.

Note:

Configuration changes in Oracle Traffic Director sometimes requires changes to multiple files such as server.xml, obj.conf, and magnus.conf. Hence configuration changes in Oracle Traffic Director should either be overridden or pulled with these files treated as a unit in order to avoid inconsistencies. As a result, even if one of these files is modified, all of them will be shown as modified since they are treated as a file unit.

Example

showComponentChanges()
component otd_test.example.com changes on machine example.com: no change found.
component otd_origin-server-1.example.com changes on machine example.com: no change found.
component otd_origin-server-2.example.com changes on machine example.com: no change found.
component otd_origin-server-3.example.com changes on machine example.com: no change found.
 
showComponentChanges('otd_test.example.com')
add OTD/test/config/foo.conf 1970.01.01-05:30:00 2014.11.07-17:06:30
edit OTD/test/config/server.xml 2014.11.06-19:48:15 2014.11.07-17:06:08
edit OTD/test/config/test-obj.conf 2014.11.06-16:59:32 1970.01.01-05:29:59
remove OTD/test/config/obj.conf 2014.11.06-19:48:15 1970.01.01-05:30:00

softRestart

Description

Use this WLST command to restart or reconfigure the instance

Reconfigure dynamically applies configuration changes on instances without a server restart. Only dynamically reconfigurable changes in the configuration take effect. Changes in the user, temp-path, log, thread-pool, pkcs11, stats, dns, dns-cache, ssl-session-cache, and access-log-buffer settings remain the same after a reconfiguration procedure is completed. A Restart-required exception will be thrown if there are any such changes that require restart when a reconfiguration is done.

Syntax

softRestart(name, [block], [properties])

Argument	Definition
name	Name of the system component to restart.
block	Optional. Boolean value specifying whether WLST should block user interaction until the server is restarted.
properties	Optional. Properties value specifying properties to pass to the system component.

Example

Reconfiguring the instance:

props = java.util.Properties()
props.setProperty("MODE", "RECONFIG")
cmo.softRestart(props)

Restarting the instance:

cmo.softRestart(java.util.Properties())

start

Description

Starts an instance.

Syntax

start(name, [type])

Argument	Definition
name	Name of the system component to start.
type	Optional. Type, `Server` or `Cluster`. This argument defaults to `Server`. When starting a cluster, you must set this argument explicitly to `Cluster`, or the command will fail.

Example

start('otd_foo_machine1')

state

Description

Returns the state of an instance.

Syntax

state(name, [type])

Argument	Definition
name	Name of the server, cluster, or system component for which you want to retrieve the current state.
type	Optional. Type is `Server,` `Cluster,` or `SystemComponent`. If not specified, WLST will look for a server, cluster, or system component with the specified name.

Example

state('otd_test.in.example.com')

See Also

help

stop

Description

Stops an instance.

Syntax

stop(name, [type])

Example

stop('host.example.com', 'SystemComponent')

stopEdit

Description

Stops the edit session, discards unsaved changes and releases the edit lock.

Syntax

stopEdit([defaultAnswer])

Argument	Definition
defaultAnswer	Optional. Default response, if you would prefer not to be prompted at the command line. Valid values are `y` and `n`. This argument defaults to null, and WLST prompts you for a response.

Example

The following example stops the current editing session. WLST prompts for verification before canceling.

wls:/mydomain/edit !> stopEdit() 
Sure you would like to stop your edit session? (y/n)
y 
Edit session has been stopped successfully.
wls:/mydomain/edit>

undo

Description

This command reverts all unsaved (undo()) or unactivated (undo('true')) edits. This command does not release the edit session. The effect of this command is not limited to Oracle Traffic Director. All the changes done after starting an edit session to the various other components and managed servers will also be reverted.

Syntax

undo([unactivatedChanges], [defaultAnswer])

Argument	Definition
unactivatedChanges	Optional. Boolean value specifying whether to undo all unactivated changes, including edits that have been saved to disk. This argument defaults to false, indicating that all edits since the last `save` operation are reverted.
defaultAnswer	Optional. Default response, if you would prefer not to be prompted at the command line. Valid values are `y` and `n`. This argument defaults to null, and WLST prompts you for a response.

Example

The following example reverts all changes since the last save operation. WLST prompts for verification before reverting.

wls:/mydomain/edit !> undo() 
Sure you would like to undo your changes? (y/n)
y 
Discarded your in-memory changes successfully.
wls:/mydomain/edit>

The following example reverts all unactivated changes. WLST prompts for verification before reverting.

wls:/mydomain/edit !> undo('true') 
Sure you would like to undo your changes? (y/n)
y 
Discarded all your changes successfully.
wls:/mydomain/edit>