OTN Home > Oracle WebLogic Server 12.2.1.0 Documentation > Administration Console Online Help > Create a cluster

Administration Console Online Help

Previous Next Open TOC in new window
Content starts here

Create a cluster

Before you begin

For information on selecting a messaging mode (unicast or multicast) for your cluster, see Communications in a Cluster.

  1. If you have not already done so, in the Change Center of the Administration Console, click Lock & Edit (see Use the Change Center).
  2. In the left pane of the Console, select Environment > Clusters.
  3. Click New and select Cluster.
  4. On the Cluster Properties page:
    1. In Name, enter a unique name for your new cluster.
    2. In Messaging Mode, select the messaging mode you want to use for this cluster.

      If you are creating a cluster within an existing WebLogic Server environment or you need to ensure backward compatibility with older versions of WebLogic Server, you must use the multicast messaging type. IP multicast is a simple broadcast technology that enables multiple applications to subscribe to a given IP address and port number and listen for messages.

    3. If you are using the unicast messaging mode, enter the unicast broadcast channel in Unicast Broadcast Channel. This channel is used to transmit messages with the cluster. If you do not specify a channel, the default channel is used.
    4. If you are using the multicast messaging mode:

      Enter the multicast address of the new cluster in Multicast Address. A multicast address is an IP address in the range from 224.0.0.0 to 239.255.255.255. The valid range is from 224.0.0.0 to 239.255.255.255. The default value used by WebLogic Server is 239.192.0.0. You should avoid using multicast addresses in the range x.0.0.1. This address must be unique to this cluster and should not be shared by other applications.

      Enter the multicast port for the new cluster in Multicast Port. The multicast port is used by cluster members to communicate with each other. Valid values are between 1 and 65535.

  5. Click OK.
  6. To activate these changes, in the Change Center of the Administration Console, click Activate Changes.
    Not all changes take effect immediately—some require a restart (see Use the Change Center).

Result

The new cluster appears in the Summary of Clusters table.


Back to Top