DefaultCredentialMapperMBean


Overview  |   Related MBeans  |   Attributes  |   Operations

Overview

This MBean represents configuration attributes for the WebLogic Credential Mapping provider.

       
Fully Qualified Interface NameIf you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.security.providers.credentials.DefaultCredentialMapperMBean
Factory Methods No factory methods. Instances of this MBean are created automatically.
Access Points Inherited from CredentialMapperMBean Because this MBean extends or implements CredentialMapperMBean, you can also access this MBean by retrieving CredentialMapperMBeans. The following attributes contain CredentialMapperMBeans and its subtypes:
    Deprecated Factory Methods and Access Points


      Related MBeans

      This section describes attributes that provide access to other MBeans.


        Realm

        Returns the realm that contains this security provider. Returns null if this security provider is not contained by a realm.

               
        Privileges Read only
        TypeRealmMBean
        Relationship type: Reference.


        Attributes

        This section describes the following attributes:


        CredentialMappingDeploymentEnabled

        Returns whether this Credential Mapping provider stores stores credential maps created when deploying a resource adapter.

               
        Privileges Read/Write
        Typeboolean
        Default Valuetrue

        Description

        A short description of the WebLogic Credential Mapping provider.

               
        Privileges Read only
        Typejava.lang.String
        Default ValueWebLogic Credential Mapping Provider
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        JWTTokenExpiration

        The time of the JWT token being valid after issueing, unit is minute

               
        Privileges Read/Write
        Typeint
        Default Value3

        Name

               
        Privileges Read only
        Typejava.lang.String
        Default ValueDefaultCredentialMapper
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        ProviderClassName

        The name of the Java class that loads the WebLogic Credential Mapping provider.

               
        Privileges Read only
        Typejava.lang.String
        Default Valueweblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        SupportedExportConstraints

        The credential maps that you want to be exported from this Credential Mapping provider's database. If none are specified, all are exported.

               
        Privileges Read only
        Typeclass java.lang.String[]
        Default Value passwords
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        SupportedExportFormats

        The format of the file to export. The list of supported export formats is determined by this Credential Mapping provider.

               
        Privileges Read only
        Typeclass java.lang.String[]
        Default Value DefaultCreds
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        SupportedImportConstraints

        The credential maps that you want to be imported into this Credential Mapping provider's database. If none are specified, all are imported.

               
        Privileges Read only
        Typeclass java.lang.String[]
        Default Value
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        SupportedImportFormats

        The format of the fie to import. The list of supported import formats is determined by the Credential Mapping provider from which the credential maps were originally exported.

               
        Privileges Read only
        Typeclass java.lang.String[]
        Default Value DefaultCreds
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

        Version

        The version of the WebLogic Credential Mapping provider.

               
        Privileges Read only
        Typejava.lang.String
        Default Value1.0
        Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.


        Operations

        This section describes the following operations:


        advance

        Advances the list to the next element in the list.

           
        Operation Name"advance"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor returned from a previous list method.

        SignatureString [] { "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        close

        Indicates that the caller is finished using the list, and that the resources held on behalf of the list may be released. If the caller traverses through all the elements in the list, the caller need not call this method. In other words, it is used to let the caller close the list without reading each element that is returned.

           
        Operation Name"close"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor returned from a previous list method.

        SignatureString [] { "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        exportData

        Exports provider specific data in a specified format. When errors occur, the MBean throws an ErrorCollectionException containing a list of java.lang.Exceptions, where the text of each exception describes the error.

           
        Operation Name"exportData"
        ParametersObject [] {  formatfilenameconstraints }

        where:

        • format is an object of type java.lang.String that specifies:

          - The format for exporting provider specific data.

        • filename is an object of type java.lang.String that specifies:

          - The full path to the filename used to write data.

        • constraints is an object of type java.util.Properties that specifies:

          - The constraints to be used when exporting data. A null value indicates that all data will be exported.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.util.Properties" }
        Returns void
        Exceptions
        • weblogic.management.utils.InvalidParameterException
        • weblogic.management.utils.ErrorCollectionException

        getCurrentCredentialRemotePassword

        Gets a password from a list that has been returned from the listCredentials method. This method returns the password that corresponds to current location in the list. Deprecated in WLS 9.0

        Deprecated. 9.0.0.0

           
        Operation Name"getCurrentCredentialRemotePassword"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listCredentials method.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getCurrentCredentialRemoteUserName

        Gets a remote username from a list that has been returned from the listCredentials method. This method returns the remote username that corresponds to current location in the list.

           
        Operation Name"getCurrentCredentialRemoteUserName"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listCredentials method.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getCurrentMappingRemoteUserName

        Gets an remote username from a credentials mapping that has been returned from the listMappings method. This method returns the remote username that corresponds to current location in the list.

           
        Operation Name"getCurrentMappingRemoteUserName"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listMappings method.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getCurrentMappingResourceID

        Gets an resource id from a credentials map that has been returned from the listMappingsByPattern method. This method returns the resource id that corresponds to current location in the list.

           
        Operation Name"getCurrentMappingResourceID"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listMappings method and the listMappingsByPattern.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getCurrentMappingWLSUserIdentityDomain

        Gets an identity domain associated with the WLS user from a credentials mapping that has been returned from the listMappings method. This method returns the identity domain associated with a username that corresponds to current location in the list.

           
        Operation Name"getCurrentMappingWLSUserIdentityDomain"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listMappings method.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getCurrentMappingWLSUserName

        Gets a webLogic username from a credentials mapping that has been returned from the listMappings method. This method returns the local webLogic username that corresponds to current location in the list.

           
        Operation Name"getCurrentMappingWLSUserName"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor that has been returned from the listMappings method.

        SignatureString [] { "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        getRemotePassword

        Gets the remote password corresponding to the remote username in the credential created for the specified resource. Deprecated in WLS 9.0

        Deprecated. 9.0.0.0

           
        Operation Name"getRemotePassword"
        ParametersObject [] {  resourceIdremoteUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential was created.

        • remoteUserName is an object of type java.lang.String that specifies:

          - The external username.

        SignatureString [] { "java.lang.String", "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.NotFoundException

        getRemoteUserName

        Gets the external username that is mapped to a local webLogic username for the specified resource.

           
        Operation Name"getRemoteUserName"
        ParametersObject [] {  resourceIdwlsUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource on which the mapping between the local weblogic user and the remote user was created.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The local weblogic username.

        SignatureString [] { "java.lang.String", "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.NotFoundException

        getRemoteUserName

        Gets the external username that is mapped to a local WebLogic username for the specified resource.

           
        Operation Name"getRemoteUserName"
        ParametersObject [] {  resourceIdwlsUserNameidentityDomain }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource on which the mapping between the local WebLogic user and the remote user was created.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The local WebLogic username.

        • identityDomain is an object of type java.lang.String that specifies:

          - The identity domain of the WebLogic user.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.lang.String" }
        ReturnsString
        Exceptions
        • weblogic.management.utils.NotFoundException

        haveCurrent

        Returns true if there are more objects in the list, and false otherwise.

           
        Operation Name"haveCurrent"
        ParametersObject [] {  cursor }

        where:

        • cursor is an object of type java.lang.String that specifies:

          - The cursor returned from a previous list method.

        SignatureString [] { "java.lang.String" }
        Returns boolean
        Exceptions
        • weblogic.management.utils.InvalidCursorException

        importData

        Imports provider specific data from a specified format. When errors occur, the MBean throws an ErrorCollectionException containing a list of java.lang.Exceptions, where the text of each exception describes the error.

           
        Operation Name"importData"
        ParametersObject [] {  formatfilenameconstraints }

        where:

        • format is an object of type java.lang.String that specifies:

          - The format for importing provider specific data.

        • filename is an object of type java.lang.String that specifies:

          - The full path to the filename used to read data.

        • constraints is an object of type java.util.Properties that specifies:

          - The constraints to be used when importing data. A null value indicates that all data will be imported.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.util.Properties" }
        Returns void
        Exceptions
        • weblogic.management.utils.InvalidParameterException
        • weblogic.management.utils.ErrorCollectionException

        isSet

        Returns true if the specified attribute has been set explicitly in this MBean instance.

           
        Operation Name"isSet"
        ParametersObject [] {  propertyName }

        where:

        • propertyName is an object of type java.lang.String that specifies:

          property to check

        SignatureString [] { "java.lang.String" }
        Returns boolean
        Exceptions
        • java.lang.IllegalArgumentException

        listCredentials

        Gets a list of credentials mapped to the resource. Returns a cursor as a string. Use the getCurrentCredentialRemoteUserName and getCurrentCredentialRemotePassword methods to get the username and password for the current item in the list.

           
        Operation Name"listCredentials"
        ParametersObject [] {  resourceId }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credentials are to be returned.

        SignatureString [] { "java.lang.String" }
        ReturnsString

        listMappings

        Gets a list of credential mappings created for the given resource id. Returns a cursor as a string. Use the getCurrentMappingWLSUserName and getCurrentMappingRemoteUserName methods to return the webLogic username and remote user name for the current item in the list.

           
        Operation Name"listMappings"
        ParametersObject [] {  resourceId }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential mappings are to be returned.

        SignatureString [] { "java.lang.String" }
        ReturnsString

        listMappingsByPattern

        Gets a list of all credential mappings with the resource id matching the specified resource id pattern. Returns a cursor as a string. Use the getCurrentMappingWLSUserName and getCurrentMappingRemoteUserName() and getCurrentMappingResourceID() methods to return the WebLogic username and external user name and the current resource ID for the current item in the list.

           
        Operation Name"listMappingsByPattern"
        ParametersObject [] {  resourceIdPatternmaxToReturn }

        where:

        • resourceIdPattern is an object of type java.lang.String that specifies:

          - Resource Id string pattern, that can contain '*' - wild card, and '' - escape character.

        • maxToReturn is an object of type java.lang.Integer that specifies:

          - Maximum number of returned mappings

        SignatureString [] { "java.lang.String", "java.lang.Integer" }
        ReturnsString

        removeUserPasswordCredential

        Removes the credential that is created on the specified resource and remote username. If you created a credential map that specifies this username, the map becomes invalid. Users must remove any credential mappings created for the credential and the specified resource before removing the credential.

           
        Operation Name"removeUserPasswordCredential"
        ParametersObject [] {  resourceIdremoteUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential is to be removed.

        • remoteUserName is an object of type java.lang.String that specifies:

          - The name of remote user.

        SignatureString [] { "java.lang.String", "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.NotFoundException

        removeUserPasswordCredentialMapping

        Removes the mapping from a webLogic username to a remote username-password credential for the specified resource.

           
        Operation Name"removeUserPasswordCredentialMapping"
        ParametersObject [] {  resourceIdwlsUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential mapping is removed.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The user name of the webLogic user.

        SignatureString [] { "java.lang.String", "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.NotFoundException

        removeUserPasswordCredentialMapping

        Removes the mapping from a webLogic username to a remote username-password credential for the specified resource.

           
        Operation Name"removeUserPasswordCredentialMapping"
        ParametersObject [] {  resourceIdwlsUserNameidentityDomain }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential mapping is removed.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The user name of the WebLogic user.

        • identityDomain is an object of type java.lang.String that specifies:

          = The identity domain of the WebLogic user.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.NotFoundException

        setUserPasswordCredential

        Sets a remote user-password credential for the specified resource. If a new new username is specified, this method creates a new user-password credential. If you specify an existing username, this method replaces the user's password.

           
        Operation Name"setUserPasswordCredential"
        ParametersObject [] {  resourceIdremoteUserNameremotePassword }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential is created.

        • remoteUserName is an object of type java.lang.String that specifies:

          - The username for the credential.

        • remotePassword is an object of type java.lang.String that specifies:

          - The password for the credential.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.lang.String" }
        Returns void

        setUserPasswordCredentialMapping

        Creates a mapping from a webLogic username to a remote username-password credential for the specified resource. The credential for the remoteusername for the specified resource should be created before this mapping is created.

           
        Operation Name"setUserPasswordCredentialMapping"
        ParametersObject [] {  resourceIdwlsUserNameidentityDomainremoteUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential mapping is created.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The user name of the WebLogic user.

        • identityDomain is an object of type java.lang.String that specifies:

          - The identity domain of the WebLogic user.

        • remoteUserName is an object of type java.lang.String that specifies:

          - The name of remote user the mapping is being created for.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.lang.String", "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.NotFoundException

        setUserPasswordCredentialMapping

        Creates a mapping from a webLogic username to a remote username-password credential for the specified resource. The credential for the remoteusername for the specified resource should be created before this mapping is created.

           
        Operation Name"setUserPasswordCredentialMapping"
        ParametersObject [] {  resourceIdwlsUserNameremoteUserName }

        where:

        • resourceId is an object of type java.lang.String that specifies:

          - The resource for which the credential mapping is created.

        • wlsUserName is an object of type java.lang.String that specifies:

          - The user name of the webLogic user.

        • remoteUserName is an object of type java.lang.String that specifies:

          - The name of remote user the mapping is being created for.

        SignatureString [] { "java.lang.String", "java.lang.String", "java.lang.String" }
        Returns void
        Exceptions
        • weblogic.management.utils.NotFoundException

        unSet

        Restore the given property to its default value.

           
        Operation Name"unSet"
        ParametersObject [] {  propertyName }

        where:

        • propertyName is an object of type java.lang.String that specifies:

          property to restore

        SignatureString [] { "java.lang.String" }
        Returns void
        Exceptions
        • java.lang.IllegalArgumentException
          UnsupportedOperationException if called on a runtime implementation.

        wls_getDisplayName

        Returns the display name of an MBean.

        Deprecated 9.0.0.0

           
        Operation Name"wls_getDisplayName"
        Parametersnull
        Signaturenull
        ReturnsString