This chapter includes the following sections:
Classloaders are a fundamental module of the Java language. A classloader is a part of the Java virtual machine (JVM) that loads classes into memory; a classloader is responsible for finding and loading class files at run time. Every successful Java programmer needs to understand classloaders and their behavior. This section provides an overview of Java classloaders.
Classloaders contain a hierarchy with parent classloaders and child classloaders. The relationship between parent and child classloaders is analogous to the object relationship of super classes and subclasses. The bootstrap classloader is the root of the Java classloader hierarchy. The Java virtual machine (JVM) creates the bootstrap classloader, which loads the Java development kit (JDK) internal classes and
java.* packages included in the JVM. (For example, the bootstrap classloader loads
The extensions classloader is a child of the bootstrap classloader. The extensions classloader loads any JAR files placed in the extensions directory of the JDK. This is a convenient means to extending the JDK without adding entries to the classpath. However, anything in the extensions directory must be self-contained and can only refer to classes in the extensions directory or JDK classes.
The system classpath classloader extends the JDK extensions classloader. The system classpath classloader loads the classes from the classpath of the JVM. Application-specific classloaders (including WebLogic Server classloaders) are children of the system classpath classloader.
Note:What Oracle refers to as a "system classpath classloader" is often referred to as the "application classloader" in contexts outside of WebLogic Server. When discussing classloaders in WebLogic Server, Oracle uses the term "system" to differentiate from classloaders related to Java EE applications or libraries (which Oracle refers to as "application classloaders").
Classloaders use a delegation model when loading a class. The classloader implementation first checks its cache to see if the requested class has already been loaded. This class verification improves performance in that its cached memory copy is used instead of repeated loading of a class from disk. If the class is not found in its cache, the current classloader asks its parent for the class. Only if the parent cannot load the class does the classloader attempt to load the class. If a class exists in both the parent and child classloaders, the parent version is loaded. This delegation model is followed to avoid multiple copies of the same form being loaded. Multiple copies of the same class can lead to a
Classloaders ask their parent classloader to load a class before attempting to load the class themselves. Classloaders in WebLogic Server that are associated with Web applications can be configured to check locally first before asking their parent for the class. This allows Web applications to use their own versions of third-party classes, which might also be used as part of the WebLogic Server product. The prefer-web-inf-classes Element section discusses this in more detail.
weblogic.xml Web application deployment descriptor contains a
<prefer-web-inf-classes> element (a sub-element of the
<container-descriptor> element). By default, this element is set to
False. Setting this element to
True subverts the classloader delegation model so that class definitions from the Web application are loaded in preference to class definitions in higher-level classloaders. This allows a Web application to use its own version of a third-party class, which might also be part of WebLogic Server. See "weblogic.xml Deployment Descriptor Elements".
When using this feature, you must be careful not to mix instances created from the Web application's class definition with instances created from the server's definition. If such instances are mixed, a
Example 11-1 illustrates the
prefer-web-inf-classes element, its description and default value.
WebLogic Server allows you to deploy newer versions of application modules such as EJBs while the server is running. This process is known as hot-deploy or hot-redeploy and is closely related to classloading.
Java classloaders do not have any standard mechanism to undeploy or unload a set of classes, nor can they load new versions of classes. In order to make updates to classes in a running virtual machine, the classloader that loaded the changed classes must be replaced with a new classloader. When a classloader is replaced, all classes that were loaded from that classloader (or any classloaders that are offspring of that classloader) must be reloaded. Any instances of these classes must be re-instantiated.
In WebLogic Server, each application has a hierarchy of classloaders that are offspring of the system classloader. These hierarchies allow applications or parts of applications to be individually reloaded without affecting the rest of the system. WebLogic Server Application Classloading discusses this topic.
The policy classloader is the default system class loader when starting WebLogic Server using a
startWebLogic script. The policy classloader improves class loader performance and server startup time through class caching and indexing and is supported in any WebLogic mode (development or production).
The policy classloader caches loaded classes in a cache file. Upon subsequent starts, the cached classes are pre-loaded in bulk, improving performance in use cases that load a large number of classes from the system class loader, such as server startup. The policy classloader also contains an eager index, which maps package names and JAR files containing the source code. This index improves lookup time for classes and reduces the time spent looking for missing classes or resources. Cached files are generated in the
In WebLogic Server 12.1.3, you could enable class caching in development mode by setting the
CLASS_CACHE environment variable in the
startWebLogic script. For pre-existing 12.1.3 start scripts, continue to use the
CLASS_CACHE variable to enable class caching. See "Configuring Class Caching" in Developing Applications for Oracle WebLogic Server 12c (12.1.3).
As of WebLogic Server 12.2.1, new domains use the policy classloader by default for class caching. Any 12.1.3 domains that upgrade to 12.2.1 also automatically use the policy classloader.
The following sections provide an overview of the WebLogic Server application classloaders:
WebLogic Server classloading is centered on the concept of an application. An application is normally packaged in an Enterprise Archive (EAR) file containing application classes. Everything within an EAR file is considered part of the same application. The following may be part of an EAR or can be loaded as standalone applications:
An Enterprise JavaBean (EJB) JAR file
A Web application WAR file
A resource adapter RAR file
Note:See the following sections for more information:
If you deploy an EJB and a Web application separately, they are considered two applications. If they are deployed together within an EAR file, they are one application. You deploy modules together in an EAR file for them to be considered part of the same application.
Every application receives its own classloader hierarchy; the parent of this hierarchy is the system classpath classloader. This isolates applications so that application A cannot see the classloaders or classes of application B. In hierarchy classloaders, no sibling or friend concepts exist. Application code only has visibility to classes loaded by the classloader associated with the application (or module) and classes that are loaded by classloaders that are ancestors of the application (or module) classloader. This allows WebLogic Server to host multiple isolated applications within the same JVM.
WebLogic Server automatically creates a hierarchy of classloaders when an application is deployed. The root classloader in this hierarchy loads any EJB JAR files in the application. A child classloader is created for each Web application WAR file.
Because it is common for Web applications to call EJBs, the WebLogic Server application classloader architecture allows JavaServer Page (JSP) files and servlets to see the EJB interfaces in their parent classloader. This architecture also allows Web applications to be redeployed without redeploying the EJB tier. In practice, it is more common to change JSP files and servlets than to change the EJB tier.
The following graphic illustrates this WebLogic Server application classloading concept.
If your application includes servlets and JSPs that use EJBs:
Package the servlets and JSPs in a WAR file
Package the Enterprise JavaBeans in an EJB JAR file
Package the WAR and JAR files in an EAR file
Deploy the EAR file
Although you could deploy the WAR and JAR files separately, deploying them together in an EAR file produces a classloader arrangement that allows the servlets and JSPs to find the EJB classes. If you deploy the WAR and JAR files separately, WebLogic Server creates sibling classloaders for them. This means that you must include the EJB home and remote interfaces in the WAR file, and WebLogic Server must use the RMI stub and skeleton classes for EJB calls, just as it does when EJB clients and implementation classes are in different JVMs. This concept is discussed in more detail in the next section Application Classloading and Pass-by-Value or Reference.
Note:The Web application classloader contains all classes for the Web application except for the JSP class. The JSP class obtains its own classloader, which is a child of the Web application classloader. This allows JSPs to be individually reloaded.
You can create custom classloader hierarchies for an application allowing for better control over class visibility and reloadability. You achieve this by defining a
classloader-structure element in the
weblogic-application.xml deployment descriptor file.
The following diagram illustrates how classloaders are organized by default for WebLogic applications. An application level classloader exists where all EJB classes are loaded. For each Web module, there is a separate child classloader for the classes of that module.
For simplicity, JSP classloaders are not described in the following diagram.
This hierarchy is optimal for most applications, because it allows call-by-reference semantics when you invoke EJBs. It also allows Web modules to be independently reloaded without affecting other modules. Further, it allows code running in one of the Web modules to load classes from any of the EJB modules. This is convenient, as it can prevent a Web module from including the interfaces for EJBs that it uses. Note that some of those benefits are not strictly Java EE-compliant.
The ability to create custom module classloaders provides a mechanism to declare alternate classloader organizations that allow the following:
Reloading individual EJB modules independently
Reloading groups of modules to be reloaded together
Reversing the parent child relationship between specific Web modules and EJB modules
Namespace separation between EJB modules
You can declare the classloader hierarchy in the WebLogic-specific application deployment descriptor
The DTD for this declaration is as follows:
<!ELEMENT classloader-structure (module-ref*, classloader-structure*)> <!ELEMENT module-ref (module-uri)> <!ELEMENT module-uri (#PCDATA)>
The top-level element in
weblogic-application.xml includes an optional
classloader-structure element. If you do not specify this element, then the standard classloader is used. Also, if you do not include a particular module in the definition, it is assigned a classloader, as in the standard hierarchy. That is, EJB modules are associated with the application root classloader, and Web application modules have their own classloaders.
classloader-structure element allows for the nesting of
classloader-structure stanzas, so that you can describe an arbitrary hierarchy of classloaders. There is currently a limitation of three levels. The outermost entry indicates the application classloader. For any modules not listed, the standard hierarchy is assumed.
Note:JSP classloaders are not included in this definition scheme. JSPs are always loaded into a classloader that is a child of the classloader associated with the Web module to which it belongs.
For more information on the DTD elements, refer to Appendix A, "Enterprise Application Deployment Descriptor Elements."
The following is an example of a classloader declaration (defined in the
classloader-structure element in
<classloader-structure> <module-ref> <module-uri>ejb1.jar</module-uri> </module-ref> <module-ref> <module-uri>web3.war</module-uri> </module-ref> <classloader-structure> <module-ref> <module-uri>web1.war</module-uri> </module-ref> </classloader-structure> <classloader-structure> <module-ref> <module-uri>ejb3.jar</module-uri> </module-ref> <module-ref> <module-uri>web2.war</module-uri> </module-ref> <classloader-structure> <module-ref> <module-uri>web4.war</module-uri> </module-ref> </classloader-structure> <classloader-structure> <module-ref> <module-uri>ejb2.jar</module-uri> </module-ref> </classloader-structure> </classloader-structure> </classloader-structure>
The organization of the nesting indicates the classloader hierarchy. The above stanza leads to a hierarchy shown in the following diagram.
User-defined classloader restrictions give you better control over what is reloadable and provide inter-module class visibility. This feature is primarily for developers. It is useful for iterative development, but the reloading aspect of this feature is not recommended for production use, because it is possible to corrupt a running application if an update includes invalid elements. Custom classloader arrangements for namespace separation and class visibility are acceptable for production use. However, programmers should be aware that the Java EE specifications say that applications should not depend on any given classloader organization.
Some classloader hierarchies can cause modules within an application to behave more like modules in two separate applications. For example, if you place an EJB in its own classloader so that it can be reloaded individually, you receive call-by-value semantics rather than the call-by-reference optimization Oracle provides in our standard classloader hierarchy. Also note that if you use a custom hierarchy, you might end up with stale references. Therefore, if you reload an EJB module, you should also reload the calling modules.
There are some restrictions to creating user-defined module classloader hierarchies; these are discussed in the following sections.
If you use a custom classloader hierarchy, servlet reloading is disabled for Web applications in that particular application.
Nesting is limited to three levels (including the application classloader). Deeper nestings lead to a deployment exception.
The standard WebLogic Server classloader hierarchy makes EJB interfaces available to all modules in the application. Thus other modules can invoke an EJB, even though they do not include the interface classes in their own module. This is possible because EJBs are always loaded into the root classloader and all other modules either share that classloader or have a classloader that is a child of that classloader.
With the custom classloader feature, you can configure a classloader hierarchy so that a callee's classes are not visible to the caller. In this case, the calling module must include the interface classes. This is the same requirement that exists when invoking on modules in a separate application.
The standard classloader hierarchy provided with WebLogic Server allows for calls between modules within an application to use call-by-reference semantics. This is because the caller is always using the same classloader or a child classloader of the callee. With this feature, it is possible to configure the classloader hierarchy so that two modules are in separate branches of the classloader tree. In this case, call-by-value semantics are used.
Be aware that the classloader switch required for reloading is not atomic across modules. In fact, updates to applications in general are not atomic. For this reason, it is possible that different in-flight operations (operations that are occurring while a change is being made) might end up accessing different versions of classes depending on timing.
WebLogic Server allows you to reload individual EJB modules without requiring you to reload other modules at the same time and having to redeploy the entire EJB module. This feature is similar to how JSPs are currently reloaded in the WebLogic Server servlet container.
Because EJB classes are invoked through an interface, it is possible to load individual EJB implementation classes in their own classloader. This way, these classes can be reloaded individually without having to redeploy the entire EJB module. Below is a diagram of what the classloader hierarchy for a single EJB module would look like. The module contains two EJBs (
Bar). This would be a sub-tree of the general application hierarchy described in the previous section.
To perform a partial update of files relative to the root of the exploded application, use the following command line:
java weblogic.Deployer -adminurl url -user user -password password -name myapp -redeploy myejb/foo.class
-redeploy command, you provide a list of files relative to the root of the exploded application that you want to update. This might be the path to a specific element (as above) or a module (or any set of elements and modules). For example:
java weblogic.Deployer -adminurl url -user user -password password -name myapp -redeploy mywar myejb/foo.class anotherejb
Given a set of files to be updated, the system tries to figure out the minimum set of things it needs to redeploy. Redeploying only an EJB
impl class causes only that class to be redeployed. If you specify the whole EJB (in the above example,
anotherejb) or if you change and update the EJB home interface, the entire EJB module must be redeployed.
Depending on the classloader hierarchy, this redeployment may lead to other modules being redeployed. Specifically, if other modules share the EJB classloader or are loaded into a classloader that is a child to the EJB's classloader (as in the WebLogic Server standard classloader module) then those modules are also reloaded.
Modern programming languages use two common parameter passing models: pass-by-value and pass-by-reference. With pass-by-value, parameters and return values are copied for each method call. With pass-by-reference, a pointer (or reference) to the actual object is passed to the method. Pass by reference improves performance because it avoids copying objects, but it also allows a method to modify the state of a passed parameter.
WebLogic Server includes an optimization to improve the performance of Remote Method Interface (RMI) calls within the server. Rather than using pass by value and the RMI subsystem's marshalling and unmarshalling facilities, the server makes a direct Java method call using pass by reference. This mechanism greatly improves performance and is also used for EJB 2.0 local interfaces.
RMI call optimization and call by reference can only be used when the caller and callee are within the same application. As usual, this is related to classloaders. Because applications have their own classloader hierarchy, any application class has a definition in both classloaders and receives a ClassCastException error if you try to assign between applications. To work around this, WebLogic Server uses call-by-value between applications, even if they are within the same JVM.
Note:Calls between applications are slower than calls within the same application. Deploy modules together as an EAR file to enable fast RMI calls and use of the EJB 2.0 local interfaces.
In WebLogic Server, any JAR file present in the system classpath is loaded by the WebLogic Server system classloader. All applications running within a server instance are loaded in application classloaders which are children of the system classloader. In this implementation of the system classloader, applications cannot use different versions of third-party JARs which are already present in the system classloader. Every child classloader asks the parent (the system classloader) for a particular class and cannot load classes which are seen by the parent.
For example, if a class called
com.foo.Baz exists in both
$CLASSPATH as well as the application EAR, then the class from the
$CLASSPATH is loaded and not the one from the EAR. Since
weblogic.jar is in the
$CLASSPATH, applications can not override any WebLogic Server classes.
The following sections define and describe how to use a filtering classloader:
FilteringClassLoader provides a mechanism for you to configure deployment descriptors to explicitly specify that certain packages should always be loaded from the application, rather than being loaded by the system classloader. This allows you to use alternate versions of applications such as Xerces and Ant. Though the
FilteringClassLoader lets you bundle and use 3rd party JARs in your application, it is not recommended that you filter out API classes, like classes in
javax packages or
FilteringClassLoader sits between the application classloader and the system classloader. It is a child of the system classloader and the parent of the application classloader. The
FilteringClassLoader intercepts the
) method and compares the
className with a list of packages specified in
weblogic-application.xml file. If the package matches the
FilteringClassLoader throws a
ClassNotFoundException. This exception notifies the application classloader to load this class from the application.
To configure the
FilteringClassLoader to specify that a certain package is loaded from an application, add a
prefer-application-packages descriptor element to
weblogic-application.xml which details the list of packages to be loaded from the application. The following example specifies that
antlr.* packages are loaded from the application, not the system classloader:
<prefer-application-packages> <package-name>org.apache.log4j.*</package-name> <package-name>antlr.*</package-name> </prefer-application-packages>
prefer-application-packages descriptor element can also be defined in
weblogic.xml. For more information, see "
You can specify that a certain package be loaded for a WAR file included within an EAR file by configuring the
FilteringClassLoader in the
weblogic.xml file of the WAR file.
A.ear defines the
B.war defines a different
weblogic.xml. When you deploy
B.war loads the package defined in the
weblogic.xml. The WAR-level
FilteringClassLoader has priority over the EAR-level
FilteringClassLoader for this WAR file.
For aid in configuring filtering classloaders, see Using the Classloader Analysis Tool (CAT).
The resource loading order is the order in which
getResources() return resources. When filtering is enabled, this order is slightly different from the case when filtering is disabled. Filtering is enabled implies that there are one or more package patterns in the
FilteringClassLoader. Without any filtering (default), the resources are collected in the top-down order of the classloader tree. For instance, if Web (1) requests resources, the resources are grouped in the following order: Sys (3), App (2) and Web(1). See Example 11-6.
System (3) | App (2) | Web (1)
To be more explicit, given a resource
/META-INF/foo.xml which exists in all the classloaders, would return the following list of URLs:
META-INF/foo.xml - from the System ClassLoader (3) META-INF/foo.xml - from the App ClassLoader (2) META-INF/foo.xml - from the Web ClassLoader (1)
When filtering is enabled, the resources from the child of the
FilteringClassLoader (an application classloader) down to the calling classloader are returned before the ones from the system classloader. In Example 11-7, if the same resource existed in all the classloaders (D), (B) and (A) one would get them in the following order if requested by the Web classloader:
META-INF/foo.xml - from the App ClassLoader (B) META-INF/foo.xml - from the Web ClassLoader (A) META-INF/foo.xml - from the System ClassLoader (D)
Note:The resources are returned in the default Java EE delegation model beneath the
FilteringClassLoader. Only the resources from the parent of the
FilteringClassLoaderare appended to the end of the enumeration being returned.
System (D) | FilteringClassLoader (filterList := x.y.*) (C) | App (B) | Web (A)
If the application classloader requested the same resource, the following order would be obtained.
META-INF/foo.xml - from the App ClassLoader (B) META-INF/foo.xml - from the System ClassLoader (D)
getResource(), only the first descriptor is returned and
getResourceAsStream() returns the
inputStream of the first resource.
Your applications may use many different Java classes, including Enterprise Beans, servlets and JavaServer Pages, utility classes, and third-party packages. WebLogic Server deploys applications in separate classloaders to maintain independence and to facilitate dynamic redeployment and undeployment. Because of this, you need to package your application classes in such a way that each module has access to the classes it depends on. In some cases, you may have to include a set of classes in more than one application or module. This section describes how WebLogic Server uses multiple classloaders so that you can stage your applications successfully.
For more information about analyzing and resolving classloading issues, see Using the Classloader Analysis Tool (CAT).
Each resource adapter uses its own classloader to load classes (similar to Web applications). In previous releases, modules like Web applications and EJBs that are packaged along with a resource adapter in an application archive (EAR file) do not have visibility into the resource adapter's classes. If such visibility is required, you must place the resource adapter classes in APP-INF/classes. You can also archive these classes (using the JAR utility) and place them in the APP-INF/lib of the application archive.
In WebLogic Server 12.2.1 release, the classloader of the application archive (EAR) loads the resource adapter class by default. The Enable EE Compliant Class loading for Embedded Adapters configuration option for a domain on the WebLogic Server Administration Console determines this classloading behavior of embedded adapters. This option is enabled by default. Disable this option for pre-12.2.1 classloading behavior of resource adapters. For more information, see the online help for "Domains: Configuration: General" page in Oracle WebLogic Server Administration Console Online Help.
<enable-global-access-to-classes>element in the
weblogic-ra.xmldeployment descriptor is set to
true, the EE compliant classloader setting in the domain configuration is ignored. For more information, see "weblogic-ra.xml Schema" in Developing Resource Adapters for Oracle WebLogic Server.
Make sure that no resource-adapter specific classes exist in your WebLogic Server system classpath. If you need to use resource adapter-specific classes with Web modules (for example, an EJB or Web application), you must bundle these classes in the corresponding module's archive file (for example, the JAR file for EJBs or the WAR file for Web applications).
WebLogic Server provides a location within an EAR file where you can store shared utility classes. Place utility JAR files in the
APP-INF/lib directory and individual classes in the
APP-INF/classes directory. (Do not place JAR files in the
/classes directory or classes in the
/lib directory.) These classes are loaded into the root classloader for the application.
This feature obviates the need to place utility classes in the system classpath or place classes in an EJB JAR file (which depends on the standard WebLogic Server classloader hierarchy). Be aware that using this feature is subtly different from using the manifest
Class-Path described in the following section. With this feature, class definitions are shared across the application. With manifest
Class-Path, the classpath of the referencing module is simply extended, which means that separate copies of the classes exist for each module.
The Java EE specification provides the manifest
Class-Path entry as a means for a module to specify that it requires an auxiliary JAR of classes. You only need to use this manifest
Class-Path entry if you have additional supporting JAR files as part of your EJB JAR or WAR file. In such cases, when you create the JAR or WAR file, you must include a manifest file with a
Class-Path element that references the required JAR files.
The following is a simple manifest file that references a
Manifest-Version: 1.0 [CRLF] Class-Path: utility.jar [CRLF]
In the first line of the manifest file, you must always include the
Manifest-Version attribute, followed by a new line (CR | LF |CRLF) and then the
Class-Path attribute. More information about the manifest format can be found at:
Class-Path entries refer to other archives relative to the current archive in which these entries are defined. This structure allows multiple WAR files and EJB JAR files to share a common library JAR. For example, if a WAR file contains a manifest entry of
y.jars, this entry should be next to the WAR file (not within it) as follows:
The manifest file itself should be located in the archive at
For more information, see
CAT is a Web-based class analysis tool that aids you in analyzing classloading configuration and aids you in analyzing classloading issues, such as detecting conflicts, debugging application classpaths and class conflicts, and proposes filtering configuration suggestions to help you resolve such conflicts.
CAT is a stand-alone Web application, distributed as a single WAR file,
wls-cat.war, exposing its features through a Web-based front end. CAT is deployed as an internal on-demand application only in development mode. Deployment happens upon first access. If the server is running in production mode, it is not deployed automatically. You can deploy it in production mode; there are no limitations on its use, but you must deploy it manually, just like any other Web application. CAT is located at
CAT can also be deployed on-demand to a WebLogic domain partition by accessing the partition-specific URL of the CAT web application, and then only applications deployed to that domain partition will be analyzed by CAT.
Note:CAT is not supported on IBM SDK for Java because some functions of the CAT application depend on HotSpot implementation.
CAT has a simple Web GUI that displays all your currently running applications and modules.
To begin using CAT:
Point your browser to
:/wls-cat/ and then enter your console login credentials.
When CAT needs to be accessed for a particular domain partition, point your browser to the partition-specific URL. For example,
partition is the URI prefix for the partition.
~ Or ~
In the Administration Console, select Deployments > app_name > Testing, and then select the Classloader Analysis Tool link. Enter your console login credentials.
When CAT needs to be accessed for a particular domain partition, select Domain Partitions > partition_name > Deployments > app_name > Testing, and then select the Classloader Analysis Tool link.
In the navigation pane, select the application or module that you want to analyze; a brief description of it is shown in the right-side pane. Use the right-side pane to perform actions and analyses on the selected application or module, such as:
Analyze classloading conflicts
View the system and application classloaders
CAT analyzes classes loaded by the system classpath classloader and the WebLogic Server main application classloaders, defined here as the module, application, partition, and shared-application classloaders. You can perform analysis at the class, package, or JAR level. The results for each action you select can be shown in either a basic view or a detailed view.
Note:Starting in this release of Oracle WebLogic Server 12c (12.2.1), there is no separate class loader called filtering class loader; however, module, application and shared-application class loaders are capable of filtering. Configuring filtering using deployment descriptors remains the same.
Here are some of the tasks which you can perform using CAT:
Display basic information about applications and modules
Analyze classloading conflicts
Review proposed solutions
Get suggestions for configuring filtering
Display the classloader hierarchy and the entire classpath for each classloader
Search for a class (or a resource) on a classloader
Applications can have multiple manifest references to classes that are not directly present in the applications's classpath, but which are chained into the Classpath by manifest references. In some cases, application developers may not be aware that additional classes have been unknowingly pulled into the application's classpath from other JARs, which in turn have manifest references to other JARs.
CAT has the ability to search through an application's or module's classpath to detect and display the underlying chained manifest references, as shown in the following example:
cat4mf.ear +- ejb.jar +- web-mf-in-root.war +- lib +- applib.jar +- apputil_1.jar +- apputil_1_1.jar +- apputil_1_1_1.jar +- apputil_1_2.jar +- apputil_1_2_1.jar +- ejbutil_1.jar +- ejbutil_1_1.jar +- ejbutil_1_2.jar +- ejbutil_1_2_1.jar +- webutil_1.jar +- webutil_1_1.jar +- webutil_1_1_1.jar +- webutil_2.jar +- webutil_2_1.jar
ejb.jar has a manifest reference to
ejbutil_1.jar, which has references to both
ejbutil_1_2.jar, which has a further reference to
ejbutil_1_2_1.jar, as follows:
ejb.jar -> ejbutil_1.jar -> ejbutil_1_1.jar -> ejbutil_1_2.jar -> ejbutil_1_2_1.jar
Open the CAT tool, as described in Opening the CAT Interface.
Use the navigation pane to select the running application or module to analyze.
Note: The manifest references can best be analyzed from the module level rather than the application level.
In the Summary for Application pane, click the Classloader Tree view to list all the classloaders for the selected application/module.
Selecting the detailed view from the menu displays the classpath of each classloader.
The hash code of each classloader is an active URL.
Click the classloader hash code URL you want to analyze.
The Classloader page defaults to the basic view, so select the detailed view to see the classpath and the classes loaded by the classloader.
Enter one of the loaded classnames in the Resource to analyze field (using the format
pckgname.classname, and click Analyze Resource.
The Manifest References section of the detailed output provides the list of chained manifest references for the selected classname.
Continuing with Example 11-8, the output should look like this:
path/to/user_projects/applications/cat4mf/y79s0z/ejb.jar path/to/user_projects/applications/cat4mf/y79s0z/ejbutil_1.jar path/to/user_projects/applications/cat4mf/y79s0z/ejbutil_1_2.jar path/to/user_projects/applications/cat4mf/y79s0z/ejbutil_1_2_1.jar
Java EE libraries provide an easy way to share one or more different types of Java EE modules among multiple enterprise applications. A Java EE library is a single module or collection of modules that is registered with the Java EE application container upon deployment. For more information, see Chapter 12, "Creating Shared Java EE Libraries and Optional Packages."
WebLogic Server includes a
lib subdirectory, located in the domain directory, that you can use to add one or more JAR files, so that the JAR file classes are available (within a separate system level classloader) to all Java EE applications running on WebLogic Server instances in the domain. The JARS in the domain
/lib directory will not be appended to the system classpath. The classloader that gets created is a child of the system classloader. Any classes that are in JARs in the domain
/lib directory will only be visible to Java EE applications, such as EAR files. Classes in the system classpath cannot access classes in the domain
lib subdirectory is intended for JAR files that change infrequently and are required by all or most applications deployed in the server. For example, you might use the
lib directory to store third-party utility classes that are required by all Java EE deployments in a domain. Third-party utility classes will be made available because the domain
/lib classloader will be the parent of any Java EE application.
lib directory is not recommended as a general-purpose method for sharing a JARs between one or two applications deployed in a domain, or for sharing JARs that need to be updated periodically. If you update a JAR in the
lib directory, you must reboot all servers in the domain in order for applications to realize the change. If you need to share a JAR file or Java EE modules among several applications, use the Java EE libraries feature described in Chapter 12, "Creating Shared Java EE Libraries and Optional Packages."
To share JARs using the
Shutdown all servers in the domain.
Copy the JAR file(s) to share into a
lib subdirectory of the domain directory. For example:
mkdir DOMAIN_HOME\wl_server\lib cp c:\3rdpartyjars\utility.jar DOMAIN_HOME\wl_server\lib
Note:WebLogic Server must have read access to the
libdirectory during startup.
The Administration Server does not automatically copy files in the
lib directory to Managed Servers on remote machines. If you have Managed Servers that do not share the same physical domain directory as the Administration Server, you must manually copy JAR file(s) to the
/lib directory on the Managed Server machines.
Start the Administration Server and all Managed Servers in the domain.