9 Tuning Oracle Application Development Framework (ADF)

You can tune Oracle Application Development Framework (ADF) to optimize its performance and scalability with design, configuration, and deployment considerations.

9.1 About Oracle ADF

Oracle Application Development Framework (Oracle ADF) is an end-to-end application framework that builds on Java Platform, Enterprise Edition (Java EE) standards and open-source technologies to simplify and accelerate implementing service-oriented applications.

Oracle ADF is suitable for enterprise developers who want to create applications that search, display, create, modify, and validate data by using web, wireless, desktop, or web services interfaces. If you develop enterprise solutions that search, display, create, modify, and validate data by using web, wireless, desktop, or web services interfaces, Oracle ADF can simplify your job. Used in tandem, Oracle JDeveloper 11g and Oracle ADF give you an environment that covers the full development lifecycle from design to deployment, with drag-and-drop data binding, visual UI design, and team development features built-in.

For more information, see Introduction to Oracle ADF in Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework.

9.2 Basic Tuning Considerations

To achieve optimal performance, you can follow tuning recommendations before you build, configure, and deploy ADF applications.

9.2.1 Oracle ADF Faces Configuration and Profiling

Configuration options for Oracle ADF Faces are set in the web.xml file. Most of these options have default values that are tuned for performance. Table 9-1 describes some of these configuration options.

Table 9-1 ADF Configuration Options

Parameter Description

Compression View State


Controls whether the page state is compressed. If the size of the data is compressed, latency can be reduced. This parameter should be set to True.

Enhanced Debug


Controls whether output should be enhanced for debugging. This parameter should be removed or set to False.

Check File Modification


Controls whether ADF faces check for modification date of JSP pages and discards any saved state if the file is changed. This parameter should be removed or set to False.

Client State Method


Specifies the type of saving (all or token) that should be used when client-side state saving is enabled. The default value is token.

Client-Side Log Level oracle.adf.view.rich.LOGGER_LEVEL

Sets the log level on the client-side. The default value is OFF. This parameter should be removed or set to False.

Assertion Processing


Specifies when to process assertions on the client-side. The default value is OFF. This parameter should be removed or set to False.


When you are profiling or measuring client response by time using the Firefox browser, ensure that the Firebug plug-in is disabled. While this plug-in is very useful for getting information about the page and for debugging JavaScript code on the page, it can impact the total response time.

For more information on disabling the Firefox Firebug plug-in, see the Firefox Support Home Page at http://support.mozilla.com/en-US/kb/.

9.2.2 Performance Considerations for ADF Faces

Table 9-2 provides configuration recommendations that may improve performance of ADF Faces:

Table 9-2 Configuration Parameters for ADF Faces

Configuration Recommendation Description

Avoid inline JavaScript in pages.

Inline JavaScript can increase response payload size, is never cached in the browser, and can block browser rendering. Instead of using inline JavaScript, consider putting all scripts in .js files in JavaScript libraries and add scripts to the page by using af:resource tag.

TIP: Consider using af:resource rather than trh:script when possible.

Configure the JSP timeout parameter.

Using the JavaServer Pages (JSP) timeout parameter causes infrequently used pages to be flushed from the cache by the following setting in web.xml:



Set parameter x based on your own use case scenarios.

Create a single toolbar item with a drop-down popup.

When the browser size is small because of the screen resolution, the menubar/toolbar overflow logic becomes expensive in Internet Explorer 7 and 8. It especially has problems with laying out DOM structures with input fields.

Create a single toolbar item with a drop-down and put all the input fields inside it. This drop down should have deferred child creation and contentDelivery="lazy".

Remove unknown rowCount.

A table that has an unknown rowCount can impact performance because getting the last set of rows takes excessive scrolling from the user and the application can appear to be very slow.

Remove unknown rowCount by setting DeferEstimatedRowCountProperty="false" on the view object (VO).

Disable pop-ups that cannot be displayed by the user.

The fnd:attachment component, when stamped in a table, can generate an excessive amount of DOM and client component. The amount of DOM + Client component is ~8K per cell, which impacts the performance of the entire page especially on slower browsers.

Most cells have no attachments initially and only one popup can be displayed by the user. Therefore, pop-ups that cannot be displayed by the user should have renderer="false". This cuts down the unnecessary DOM or client components sent to the browser. Similarly, the DOM has a panelGroupLayout with a number of cells that are empty. There is no need to send DOM for empty cells.

Do not use hover pop-ups on navigation links.

A hover popup on a navigation link causes the navigation to wait for the hover to be fetched first.

Consider removing the hover popup on the compensate workforce table navigation link column and, instead, place it on a separate column or on an icon inside the cell.

Increase table scrolling timeout.

Tables send a fetch request to the server on a scroll after a timeout. The timeout, before the fetch is sent to the server, is typically only 20ms if the user scrolls a short distance, but can increase to 200ms if the user scrolls further. Therefore, performance can be impacted when the user scrolls to the bottom of a page and the table sends multiple requests to the server.

To prevent the performance impact, consider increasing the timeout limit to 300ms.

Use a timeout to call _prepareForIncompleteImages.

During Partial Page Rendering (PPR) some images may not load completely. When this occurs, the parent component must be notified that the size of one of its descendants has changed. In the past this was done by using the complete attribute on the image tag. Now with Internet Explorer 8 the complete attribute is always false to alleviate performance issues with Internet Explorer 7 and 8. The attribute shows as false event for cached images immediately after the PPR content is fetched.

For Internet Explorer 8 use a timeout (10ms) to call _prepareForIncompleteImages so that the image tag called right after the .xml request is processed. Note that this is not an issue for Mozilla Firefox or Google Chrome.

Cache the GetFirstVisibleRowKeyandRow.

Performance can be improved by locally caching the first visible Rowkey and row. This cached value can be deleted on a scroll or a resize.

Use partial page navigation.

Partial Page Navigation is a feature of the ADF Faces framework that enables navigating from one ADF Faces page to another without a full page transition in the browser. The new page is sent to the client by using Partial Page Rendering (PPR)/Ajax channel.

The main advantage of partial page navigation over traditional full page navigation is improved performance: the browser no longer reinterprets and reexecutes Javascript libraries, and does not spend time for cleanup or initialization of the full page. The performance benefit from this optimization is very big; it should be enabled whenever possible.

Some known limitations of this feature are:

  • For the document's metaContainerfacet (the HEAD section), only scripts are brought over with the new page. Any other content, such as icon links or style rules can be ignored.

  • Applications cannot use anchor (hash) URLs for their own purposes.

Use page templates.

Page templates enable developers to build reusable, data-bound templates that can be used as a shell for any page. A developer can build one or more templates that provide structure and consistency for other developers building web pages. The templates have both static areas on them that cannot be changed when they are used and dynamic areas on them where the developer can place content specific on the page they are building.

There are some important considerations when using templates:

  • Since templates are present in every application page, they have to be optimized so that common performance impacts are avoided. For example, adding round corners to the template, can impact the performance for every page.

  • When building complex templates, sometimes it is easier to build them in multiple pieces and include them in the top-level template by using the <f:subview> tag. However, from a performance perspective, this is not typically recommended since it can impact memory usage on the server side. The <f:subview>tag introduces another level into the ID scoping hierarchy, which results in longer IDs. Long IDs have a negative impact on performance. Developers are advised to avoid using the <f:subview> tag unless it is required. If you can ensure that all IDs are unique, it is not necessary to use the <f:subview> around <jsp:include> . For example, if you are using <jsp:include>, break a large page into multiple pieces for easier editing. And whenever possible, avoid using the <f:subview> tag. If you are including content developed by someone else, use the <f:subview> tag if you do not know which IDs the developer used. In addition, you do not have to put the <f:subview> tag at the top of a region definition.

  • Avoid long IDs in all cases, especially on pageTemplates, subviews, subforms, and on tables or within tables. Long IDs can have a performance impact on the server side, network traffic, and client processing.

Enable ADF rich client geometry management.

ADF Rich Client supports geometry management of the browser layout where parent components are in the UI explicitly. The children components are sized to stretch and fill up available space in the browser. While this feature makes the UI look better, it has a cost. The impact is on the client-side where the browser must spend time resizing the components. The components that have geometry management by default are:












  • When you use geometry management, try to minimize the number of child components that are under a parent geometry managed component.

  • The cost of geometry management is directly related to the complexity of child components.

  • The performance cost of geometry management can be smaller (as perceived by the user) for the pages with table or other data stamped components when table data streaming is used. The client-side geometry management can be executed while the browser is waiting for the data response from the server.

Use the ADF rich client overflow feature.

ADF Rich Client supports overflow feature. This feature moves the child components to the non-visible overflow area if they cannot fit the page. The components that have built-in support for overflow are: PanelTabbed, BreadCrumbs, NavigationPane, PanelAccordion, Toolbar, and Train. The Toolbar component should be contained in a Toolbox to handle the overflow.

While there were several optimizations done to reduce the cost of overflow, it is necessary to pay special attention to the number of child components and complexity of each of them in the overflow component. Sometimes it is a good practice to set a big enough initial size of the overflow component such that overflow does not happen in most cases.

Use ADF Rich Client Partial Page Rendering (PPR).

ADF Rich Client is based on Asynchronous JavaScript and XML (Ajax) development technique. Ajax is a web development technique for creating interactive web applications, where web pages feel more responsive by exchanging small amounts of data with the server behind the scenes, without the whole web page being reloaded. The effect is to improve a web page's interactivity, speed, and usability.

With ADF Faces, the feature that delivers the Ajax partial page refresh behavior is called partial page rendering (PPR). PPR enables small areas of a page to be refreshed without having to redraw the entire page. For example, an output component can display what a user has chosen or entered in an input component or a command link or button can cause another component on the page to be refreshed.

Two main Ajax patterns are implemented with partial page rendering (PPR):

  • native component refresh

  • cross-component refresh

While the framework builds in native component refresh, cross-component refresh has to be done by developers in certain cases.

Cross-component refresh is implemented declaratively or programmatically by the application developer defining the components that are to trigger a partial update and the other components that are to act as partial listeners, and so be updated. Using cross-component refresh and implementing it correctly is one of the best ways to improve client-side response time. While designing the UI page always think about what should happen when the user clicks a command button. Is it needed for the whole page to be refreshed or only the output text field? What should happen if the value in some field is updated? For more information, see Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework.

Consider a typical situation in which a page includes an af:inputText component, an af:commandButton component, and an af:outputText component. When the user enters a value for the af:inputText, then clicks the af:commandButton, the input value is reflected in the af:outputText. Without PPR, clicking the af:commandButton triggers a full-page refresh. Using PPR, user can limit the scale of the refresh to only those components you want to refresh, in this case the af:outputText component. To achieve this, you would do two things:

  • Set up the af:commandButton for partial submit by setting the partialSubmit attribute to true. Doing this causes the command component to start firing partial page requests each time it is clicked.

  • Define the components that are to be refreshed when the partial submit takes place, in this example the af:outputText component, by setting the partialTriggers attribute for each of them to the id of the component triggering the refresh. In this example, this means setting the partialTriggers attribute of the af:outputText component to give the id of the af:commandButton component.

The steps above achieve PPR by using a command button to trigger the partial page refresh.

The main reason why partial page rendering can significantly boost the performance is that full page refresh does not happen and the framework artifacts (such as ADF Rich Client JS library and style sheets) are not reloaded and only a small part of page is refreshed. In several cases, this means no extra data is fetched or no geometry management.

The ADF Rich Client has shown that partial page rendering results in the best client-side performance. Besides the impact on the client-side, server-side processing can be faster and can have better server-side throughput and scalability.

Use ADF rich client navigation.

ADF Rich Client has an extensive support for navigation. One of the common use cases is tabbed navigation. This is currently supported by components like navigationPane, which can bind to xmlMenuModel to easily define navigation.

There is one drawback in this approach, however. It results in a full page refresh every time the user switches the tab. One option is to use panelTabbed instead. panelTabbed has built-in support for partial page rendering of the tabbed content without requiring any developer work. However, panelTabbed cannot bind to any navigational model and the content has to be available from within the page, so it has limited applicability.

Cache resources.

Developers are strongly encouraged to ensure that any resources that can be cached (images, CSS, and JavaScript) have their cache headers specified appropriately. Also, client requests for missing resources on the server result in addition round trips to the server. To avoid this, make sure that all the resources are present on the server.

Consider using the ResourceServlet to configure the web.xml file to enable resource caching:


Reduce the size of state token cache.

This property is defined in web.xml org.apache.myfaces.trinidad.CLIENT_STATE_MAX_TOKENS in token-based client-side state saving and determines how many tokens should be preserved at any one time. The default value is 15. When this value is exceeded, state is forgotten for the least recently viewed pages, which can impact users that actively use the Back button or have multiple windows that are open simultaneously.

To reduce live memory per session, consider reducing this value to 2. Reducing the state token cache to 2 means one Back button click is supported. For applications without support for a Back button, this value should be set to 1.

Define custom styles at the top of the page.

A common developer task is to define custom styles inside a regular page or template page. Since most browsers use progressive scanning of the page, a late introduction of styles forces the browser to recompute the page. This impacts the page layout performance. For better performance, define styles at the top of the page and possibly wrap them inside the ADF group tag.

An HTML page basically has two parts, the head and the body. When you add an af:document component to a page, this component creates both parts of the page for you. Any child component of the af:document is in the body part of the page. To get a component (or static CDATA content) to show up in the head, use the metaContainer facet.

To get a component (or static CDATA content) to display in the head, use the metaContainer facet as follows:

<af:document title="#{attrs.documentTitle}" theme="dark">
<f:facet name="metaContainer">
<style type="text/css">
.TabletNavigationGlobal {
text-align: right;
padding-left: 0px;
padding-right: 10px;
white-space: nowrap;
HTML[dir=rtl] .TabletNavigationGlobal {
text-align: left;
padding-left: 10px;
padding-right: 0px;
<af:facetRef facetName="metaContainer"/>
<af:form ...>
<af:facetRef facetName="body"/>

If you use page templates, consider including af:document and af:form in the template definition and expose anything that you may want to customize in those tags through the page template attributes and page template af:facetRef. Your templates are then able to utilize the metaContainer facet if they have template-specific styling as shown above. Also, your usage pages do not have to repeat the same document and form tags on every page.

See Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework for details about af:facetRef.

Optimize custom JavaScript code.

ADF Rich Client uses JavaScript on the client side. The framework itself provides most of the functionality needed. However, you may have to write a custom JavaScript code. To get the best performance, consider bundling the JavaScript code into one JS lib (one JavaScript file) and deliver it to the client. The easiest approach is to use the ADF tag: <af:resource type="javascript" source=" "/>.

If most pages require custom JavaScript code, the tag should be included in the application template. Otherwise, including it in particular pages can result in better performance. If you customize the Javascript code the lib file becomes too big. Then consider splitting it into meaningful pieces and include only the pieces needed by the page. Overall, this approach is faster since the browser cache is used and the html content of the page is smaller.

Disable debug output mode.

The debug-output element in the trinidad-config.xml file specifies whether output should be more verbose to help with debugging. When set to TRUE, the output debugging mechanism in Trinidad produces pretty-printed, commented HTML content. To improve performance by reducing the output size, you should disable the debug output mode in production environments.

Set the debug-output element to FALSE, or if necessary, remove it completely from the trinidad-config.xml file.

Disable test automation.

Enabling test automation parameter oracle.adf.view.rich.automation.ENABLED generates a client component for every component on the page, which can negatively impact performance.

Set the oracle.adf.view.rich.automation.ENABLED parameter value to FALSE (the default value) in the web.xml file to improve performance.

Disable animation.

ADF Rich Client framework has client-side animation enabled by default. Animation is introduced to provide an enhanced user experience. Some of the components, like pop-up table, have animation set for some of the operations. While using animation can improve the user experience, it can increase the response time when an action is executed. If speed is the biggest concern, then animation can be disabled by setting the flag in the trinidad-config.xml file.

Disable client-side assertions.

Assertions on client-side code base can have a significant impact on client-side performance. Set the parameter value to FALSE (the default value) to disable client-side assertions. Also ensure that the oracle.adf.view.rich.ASSERT_ENABLED is not explicitly set to TRUE in the web.xml file.

Disable JavaScript Profiler.

When the JavaScript oracle.adf.view.rich.profiler.ENABLED profiler is enabled, an extra round-trip occurs on every page to fetch the profiler data. Disable the profiler in the web.xml file to avoid this extra round-trip.

Disable resource debug mode.

When resource debug mode is enabled, the response headers do not tell the browser that resources (JS libraries, CSS style sheets, or images) can be cached.

Disable the org.apache.myfaces.trinidad.resource.DEBUG parameter in the web.xml file to ensure that caching is enabled.

Disable timestamp checking.

The org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION parameter controls whether the jsp or the jspx files are checked for modifications each time they are accessed.

Ensure that the parameter value org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION is set to FALSE (the default value) in the web.xml file.

Disable checking for CSS file modifications.

The org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION parameter controls when the CSS file modification checks are made. To aid in performance, this configuration option defaults to false-does not check for css file modifications. Set this to TRUE if you want the skinning css file changes to be reflected without stopping or starting the server.

Enable content compression.

By default, style classes that are rendered are compressed to reduce the page size. In production environments, make sure that you remove the DISABLE_CONTENT_COMPRESSION parameter from the web.xml file or set it to FALSE.

For debugging, turn off the style class content compression. You can do this by setting the DISABLE_CONTENT_COMPRESSION property to TRUE.

Enable JavaScript obfuscation.

ADF Faces supports a runtime option for providing a non-obfuscated version of the JavaScript library. The obfuscated version is supplied by default, but the non-obfuscated version is supplied for development builds. Obfuscation reduces the overall size of the JavaScript library by about 50%.

To provide an obfuscated ADF Faces build, set the org.apache.myfaces.trinidad.DEBUG_JAVASCRIPT parameter to FALSE in the web.xml file.

There are two ways to check that the code is obfuscated by using Firefox with Firebug enabled:

Check the download size:

  1. Ensure that All or JS is selected on the Net tab.

  2. Locate the all-11-version.js entry.

  3. Check the size of the column. It should be about 1.3 MB (as opposed to 2.8 MB).

Check the source:

  1. From the Script tab select all-11-version.js from the drop-down menu located above the tabs.

  2. Examine the code. If there are comments and long variable names, the library is not obfuscated.

    Note: Copyright comments are kept even in the obfuscated version of the JS files.

Enable library partitioning.

In the Oracle 11g release, library partitioning is ON by default. In the previous versions, library partitioning was OFF by default. Ensure that the library partitioning is ON by validating the oracle.adf.view.rich.libraryPartitioning.DISABLED property is set to false in the web.xml file.

9.2.3 Tuning ADF Faces Component Attributes

Table 9-3 provides configuration recommendations for ADF Faces Component Attributes:

Table 9-3 ADF Faces Component Attributes

Configuration Recommendation Description

Use the immediate attribute.

ADF Rich Client components have an immediate attribute. If a component has its immediate attribute set to TRUE (immediate="true"), then the validation, conversion, and events that are associated with the component are processed during the applyRequestValues phase. These are some cases where setting immediate to TRUE can lead to better performance.

  • To avoid processing the data from the current screen while navigating to the new page set the immediate attribute to TRUEin the commandNavigationItem in the navigationPane.

  • If the input component value has to be validated before the other values, immediate should be set to TRUE. In case of an error it be detected earlier in the cycle and additional processing be avoided.

ADF Rich Client is built on top of JSF and uses standard JSF lifecycle. See Using the JSF Lifecycle with ADF Faces in Oracle Fusion Middleware Developing Web User Interfaces with Oracle ADF Faces.

There are some important issues that are associated with the immediate attribute. Refer to Using the Immediate Attribute in Oracle Fusion Middleware Developing Web User Interfaces with Oracle ADF Faces for more information.

Note that this is an advanced feature. Most of the performance improvements can be achieved by using the af:subform component.

Use the visible and rendered attributes.

All ADF Faces Rich Client display components have two properties that dictate how the component is displayed on the page:

  • The visible property specifies whether the component is to be displayed on the page or to be hidden.

  • The rendered property specifies whether the component shall exist in the client page at all.

The EL expression is commonly used to control these properties. For better performance, consider setting the component to not rendered instead of not visible, assuming that there is no client interaction with the component. Making a component not rendered can improve server performance and client response time since the component does not have client-side representation.

Use client-side events.

ADF Rich Client framework provides the client-side event model based on component-level events rather than DOM level. The client-side event model is a very useful feature that can speed up the application. Review the following performance considerations:

  • Consider using client-side events for relatively simple event handling that can be done on the client side. This improves client-side performance by reducing the number of server round trips. Also, it can increase server-side throughput and scalability since requests do not have to be handled by the server.

  • By default, the events generated on the client-side by the client components are propagated to the server. If a client-side event handler is provided, consider canceling the event at the end of processing so that the event does not propagate to the server.

Use the id attribute.

The id attribute should not be longer than 7 characters in length. This is particularly important for naming containers. A long id can impact performance as the amount of HTML that must be sent down to the client is impacted by the length of the ids.

Use client-side components.

ADF Rich Client framework has client-side components that play a role in client-side event handling and component behavior. The clientComponent attribute is used to configure when (or if) a client-side component should be generated. Setting clientComponent attribute to TRUE has a performance impact, so determine if its necessary to generate client-side components.

For more information, see What Happens When You Set clientComponent to true in Oracle Fusion Middleware Developing Web User Interfaces with Oracle ADF Faces.

Set the childCreation attribute on af:popup to deferred for a server-side performance enhancement

Setting childCreation to deferred postpones construction of the components under the popup until the content is delivered. A deferred setting can therefore reduce the footprint of server-side state in some cases.

CAUTION: This approach cannot be used if any of the following tags are present inside the popup:

  • f:attribute

  • af:setPropertyListener

  • af:clientListener

  • af:serverListener

It also cannot be used if you need to refer to any child components of the popup before the popup is displayed. Setting childCreation="deferred" postpones creating any child components of the popup and you cannot refer to them until after the popup is shown.

9.2.4 Performance Considerations for Table and Tree Components

Table, Tree, and TreeTable are some of the most complex, and frequently used, components. Since these components can include large sets of data, they can be the common source of performance problems. Table 9-4 provides some performance recommendations.

Table 9-4 Table and Tree Component Configurations

Configuration Recommendation Description

Use editingMode="clickToEdit".

When using editingMode="editAll" all content of the editable values holders and their client components is sent. This can significantly increase the payload and the Document Object Model (DOM) content on the client.

Consider switching to editingMode="clickToEdit" to reduce the amount of transmitted data and potentially improve user interaction.

Reduce fetchSize when possible.

A larger fetch size attribute on af:table implies that more data needs to be processed, fetched from the server, and displayed on the client. This can also increase the amount of DOM displayed on the client.

Modify table fetch size.

Tables have a fetch size, which defines the number of rows to be sent to the client in one round-trip. To get the best performance, keep this number low while still allowing enough rows to fulfill the initial table view port. This ensures the best performance while eliminating extra server requests.

In addition, consider keeping the table fetch size and iterator range size in sync. By default, the table fetch size is set to the EL expression #{bindings.<name>.rangeSize} and should be equal to the iterator size.

For more information, see Using Tables, Trees, and Other Collection-Based Components in Oracle Fusion Middleware Developing Web User Interfaces with Oracle ADF Faces.

Disable column stretching.

Columns in the table and treeTable components can be stretched so that there is no unused space between the end of the last column and the edge of the table or treeTable component. This feature is turned off by default due to potential performance impacts. Turning this feature on may have a performance impact on the client rendering time, so use caution when you enable this feature with complex tables.

Consider using header rows and frozen columns only when necessary.

The table component provides features that enable you to set the row header and frozen columns. These options can provide a well-designed interface, which can lead to a good user experience. However, they can impact client-side performance. To get the best performance for table components, use these options only when they are needed.

Consider using visitTree instead of invokeOnComponent.

A partial visit using visitTree is always at least as fast as invokeOnComponent. In addition, for components that control visiting, providing both invokeOnComponent and visitTree implementations is a source of errors. Consider deprecating invokeOnComponent and use visitTree instead.

For more information, see Using Tables, Trees, and Other Collection-Based Components in Oracle Fusion Middleware Developing Web User Interfaces with Oracle ADF Faces.

9.2.5 Performance Considerations for autoSuggest

The autoSuggest feature can be enabled for inputText, inputListOfValues, and inputComboboxListOfValues components. When the user types characters in the input field, the component displays a list of suggested items. The feature performs a query in the database table to filter the results. To speed up database processing, a database index should be created on the column for which autosuggest is enabled. This improves the component's response times especially when the database table has a large number of rows.

9.2.6 Data Delivery - Lazy versus Immediate

Data for Table, Tree, and other stamped components can be delivered immediately or lazily. By default, lazy delivery is used. This means that data is not delivered in the initial response from the server. Rather, after the initial page is rendered, the client asks the server for the data and gets it as a response to the second request.

In the case of immediate delivery, data can be in line with the response to the page request. It is important to note that data delivery is per component and not per page. This means that these two can be mixed on the same page.

When choosing between these two options, consider the following:

Delivery option Description

Lazy Delivery (default)

Lazy delivery should be used for tables, or other stamped components, which are known to have slow fetch time. For example, the stamped components are the ones based on data controls using web services calls or other data controls with slow data fetch. Lazy delivery can also be used on pages where content is not immediately visible unless the user scrolls down to it. In this case the time to deliver the visible context to the client is shorter, and the user perceives better performance.

Lazy delivery is implemented by using the data streaming technique. The advantage of this approach is that the server has the ability to execute data fetches in parallel and stream data back to the client as soon as the data is available. The technique performs very well for a page with two tables, one that returns data very quickly and one that returns data very slowly. Users see the data for the fast table as soon as the data is available.

Executing data fetches in parallel also speeds up the total time to fetch data. This gives an advantage to lazy loading in cases of multiple, and possibly slow, data fetches. While streaming is the default mechanism to deliver data in lazy mode, parallel execution of data controls is not. To enable parallel execution, open the page definition and change RenderHint on the iterator to background.

In certain situations, the advantage of parallel execution is faster response time. Parallel execution could potentially use more resources due to multiple threads executing requests in parallel and possibly more database connections are opened.

Consider using parallel execution only when there are multiple slow components on the page and the stamped components belong to different data control frames (such as isolated task flows). When there is a single data control frame, parallel execution may not improve performance, since parallel execution synchronizes on the data control frame level.

Immediate Delivery

Immediate delivery (contentDelivery="immediate") should be used if the table data control is fast, or if it returns a small set of data. In these cases, the response time is faster than using lazy delivery.

Another advantage of immediate delivery is less server resource usage, compared to lazy delivery. Immediate delivery sends only one request to the server, which results in lower CPU and memory usage on the server for the given user interaction.

9.2.7 Performance Considerations for DVT Components

DVT components are data visualization components built on top of ADF Rich Client components. DVT components include graphs, gauges, Gantt charts, pivot tables and maps. Table 9-5 provides some configuration recommendations for DVT components:

Table 9-5 DVT Component Configurations

Configuration Recommendation Description

Modify the RangeSize attribute.

The RangeSize attribute defines the number of rows to return simultaneously. A RangeSize value of -1 causes the iterator to return all the rows. Using a lower value may improve performance, but it may be harder to stop the data and any data beyond RangeSize is not available in the view.

Use horizontal text instead of vertical text.

By default, pivot tables use horizontal text for column headers. However, there is an option to use vertical text as well. Vertical text can be used by specifying a CSS style for the header format such as:

writing-mode:tb-rl;filter:flipV flipH;

While vertical text can look better in some cases, it has a performance impact when the Firefox browser is used.

The problem is that vertical text is not native in Firefox as it is in Internet Explorer. To show vertical text, the pivot table uses images produced by GaugeServlet. These images cannot be cached as the text is dynamic and depends on the binding value. Due to this, every rendering of the pivot table incurs extra round-trips to the server to fetch the images, which impact network traffic, server memory, and CPU.

To have the best performance, consider using horizontal text instead of vertical text.

9.3 Advanced Tuning Considerations

After you have performed the recommended tuning modifications, you can make additional changes that are specific to your ADF Server deployment. Consider carefully whether the advanced tuning recommendations are appropriate for your environment.

9.3.1 ADF Server Performance

Oracle ADF Server components consist of the non-UI components within ADF. These include the ADF implementations of the model layer (ADFm), business services layer (ADFbc), and controller layer (ADFc). As the server components are highly configurable, it is important to choose the combination of configurations that best suits the available resources with the specified application performance and functionality.


When you use ADFm, consider using deferred execution and monitor the refresh conditions to maintain performance. Tuning Session Timeout

For ADF applications with a significant user community, the amount of memory held by sessions waiting to expire can negatively impact performance when the default session timeout of 45 minutes is used. The memory being held can be higher than what is physically available, causing the server to not be able to handle the load. For large numbers of users, such as those using a public facing website, the session timeout should be as short as possible.

To improve performance, consider modifying the default session timeout value (in minutes) in the web.xml file. Use a session timeout value that works with your use case scenario. The example below shows a session timeout of 10 minutes:

</session-config> Tuning View Objects

View objects (VOs) provide many tuning options to enable a developer to tailor the View Object to the application's specific needs. View Objects should be configured to use the minimal feature set required to fulfill the functional requirement. Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework provides detailed information on tuning View Objects. Provided here are some tips pertaining to View Object performance. Creating View Objects

To maximize View Object performance, the View Object should match the intended usage. For instance, data retrieved for a list of values pick-list is typically read-only, so a read-only View Object should be used to query this data. Tailoring the View Object to the specific needs of the application can improve performance, memory usage, CPU usage, and network usage.

Table 9-6 Types of View Objects

View Object Type Description

Read-only View Objects

If the View Object does not have to insert or update data, consider using a read-only View Object. There are two options for read-only View Objects:

  • Non-updatable EO-based View Objects

  • Expert-mode View Objects

Non-updatable EO-based View Objects offer the advantage of a customizable select list at runtime, which retrieve attributes needed in the UI, data reads from local cache (instead of reexecuting a database query), and data consistency with other updatable View Objects based on the same EO.

Expert-mode View Objects have the ability to perform SQL operations that are not supported by EOs and avoid the small performance impact from coordinating View Object and EO rows. EO-based View Objects can be marked non-updatable by deselecting the updatable option in the selected EO for the View Object, which can also be done by adding the parameter ReadOnly="true" on the EntityUsage attribute in the View Object XML definition.

Insert-only View Objects

For View Objects that are used only for inserting records, you can prevent unnecessary select queries from being executed when you use the View Object. To do this, set the option No Rows in the Retrieve from the Database group box in the View Objects Overview tab. This sets MaxFetchSize to 0 (zero) for the View Object definition.

run time-created View Objects

View Objects can be created at runtime by using the createViewObjectFromQueryStmt() API on the AM. However, avoid using runtime-created View Objects, unless absolutely necessary, due to potential performance impacts and complexity of tuning. Configuring View Object Data Fetching

View Object performance is largely dependent on how the view object is configured to fetch data. If the fetch options are not tuned correctly for the application, then the view object may fetch an excessive amount of data or may take too many round-trips to the database. Fetch options can be configured through the Retrieve from the Database group box in the View Object dialog Figure 9-1.

Figure 9-1 View Object Dialog

Description of Figure 9-1 follows
Description of "Figure 9-1 View Object Dialog"

Table 9-7 View Object Configurations

Fetch Option Description

Fetch Mode

The default fetch option is the All Rows option, which is retrieved as needed (FetchMode="FETCH_AS_NEEDED") or all at once (FetchMode="FETCH_ALL"), depending on which option is appropriate. The As Needed option ensures that an executeQuery() operation on the view object initially retrieves only as many rows as necessary to fill the first page of a display. The number of rows is set based on the view object's range size.

Fetch Size

In conjunction with the fetch mode option, the Batches field controls the number of records fetched simultaneously from the database (FetchSize in the View Object, XML). The default value is 1, which may impact performance unless only 1 row is fetched. The suggested configuration is to set to the n+1 value where n is the number of rows that are displayed in the user interface.

Note that for DVT objects, Fetch Size should be n+1 where n is either rangeSize or the likely maximum rowset size if rangeSize is -1.

Max Fetch Size

The default max fetch size for a View Object is -1, which means that there is no limit to the number of rows the View Object can fetch. Setting a max fetch size of 0 (zero) makes the View Object insert-only. In cases where the result set should only contain n rows of data, the option Only Up to Row Number should be selected and set or call setMaxFetchSize(N) to set this programmatically. To set this manually, add the parameter MaxFetchSize to the View Object XML.

For View Objects whose WHERE clause expects to retrieve a single row, set the option At Most One Row. This option ensures that the view object knows not to expect any more rows and skips its normal test for that situation. In this case no select query is issued and no rows are fetched.

Max fetch size can also be used to limit the impact from an non-selective query that may return hundreds (or thousands) of rows. In such cases, specifying the max fetch size limits the number of rows that can be fetched and stored into memory.

Forward-Only Mode

If a data set is only traversed going forward, then forward-only mode can help performance when iterating through the data set. This can be configured by programmatically calling setForwardOnly(true) on the View Object. Setting forward-only can also prevent caching previous sets of rows as the data set is traversed. Setting Additional View Object Configurations

Table 9-8 provides additional tuning considerations when you use the View Object:

Table 9-8 Additional View Object Configurations

Configuration Recommendation Description

Optimize large data sets.

View Objects provide a mechanism to page through large data sets so that a user can jump to a specific page in the results. This is configured by calling setRangeSize(N) followed by setAccessMode(RowSet.RANGE_PAGING) on the View Object where N is the number of rows contained within 1 page. When you navigate to a specific page in the data set, the application can call scrollToRangePage(P) on the View Object to navigate to page P. Range paging fetches and caches only the current page of rows in the View Object row cache at the cost of another query execution to retrieve each page of data. Range paging is not appropriate where it is beneficial to have all fetched rows in the View Object row cache (for example, when the application must read all rows in a data set for an LOV or page back and forth in records of a small data set).

Disable spilloverconfigurations when possible.

You can use the data source as virtual memorywhen the JVM container runs out of memory. By default, this is disabled and can be enabled (if needed) by setting jbo.use.pers.coll=true. Keep this option disabled (if possible) to avoid a potential performance impact.

Review SQL style configuration.

If the generic SQL92 SQL style is used to connect to generic SQL92-compliant database, then some View Object tuning options do not apply. The View Object fetch size is one such tuning option. When SQL92 SQL style is used, the fetch size defaults to 10 rows, regardless of what is configured for the View Object. When defining the database connection, the SQL style is set. By default, when you define an Oracle database connection, the SQL style is Oracle. To manually override the SQL style, pass the parameter -Djbo.SQLBuilder="SQL92" to the JVM at startup.

Use bind variables for view object queries.

If the query that is associated with the View Object contains values that may change from execution to execution, consider using bind variables. This may help to avoid reparsing the query on the database. Bind variables can be added to the View Object in the Query section of the View Object definition.

Use query optimizer hints for view object queries.

The View Object can pass hints to the database to influence which execution plan to use for the associated query. The optimizer hints can be specified in the Retrieve from the Database group box.

Use dynamic SQL generation.

View Objects can be configured to dynamically generate SQL statements at runtime instead of defining the SQL at design time. A View Object instance, that is configured with generating SQL statements dynamically, can avoid requerying a database. This is especially true during page navigation if a subset of all attributes with the same key Entity Object list is used in the subsequent page navigation. Performance can be improved by activating a superset of all the required attributes to eliminate a subsequent query execution. Enabling Batch Processing

Batch processing enables multiple inserts, updates, and deletes to be processed together when sending the operations to the database. Enabling this feature is done on the Entity Object (EO) by either selecting the Use Update Batching check box in the Tuning section of the EO's General tab, or by directly modifying the EO's XML file and adding the parameter BatchThreshold with the specified batch size to the Entity attribute.

The BatchThreshold value is the threshold at which a group of operations can be batched instead of performing each operation one at a time. If the threshold is not exceeded, then rows may be affected one at a time. On the other hand, more rows than specified by the threshold can be batched into a single batch.


the BatchThreshold configuration for the EO is not compatible if an attribute in the EO exists with the configuration to refresh after insert (RetrievedOnInsert="true") or update (RetrievedOnUpdate="true"). Tuning RangeSize

This parameter controls the number of records ADFm requests from the BC layer simultaneously. The default RangeSize is 25 records. Consider setting this value to the number of records to be displayed in the UI simultaneously for the View Object so that the number of round-trips between the model and BC layers is reduced to one. This is configured in the Iterator attribute of the corresponding page's page definition XML. Configuring Application Module Pooling

Application module (AM) pooling enables multiple users to share several application module instances. The configurations for the AM pool vary depending on the expected usage of the application.

Most of the AM pool parameters can be set through Oracle JDeveloper. The configurations are saved in the bc4j.xcfgfile, which can be manually edited if needed. Parameters can also be set at the system level by specifying these as JVM parameters (-Dproperty=value). The bc4j.xcfg configuration takes precedence over the JVM configuration; this enables a generic system-level configuration to be overridden by an application-specific exception.

Table 9-9 Application Module (AM) Pool Tuning

Configuration Recommendation Description

Optimize the number of AM pools in the application.

Parameters that are applied at the system level are applied per AM pool. If the application uses more than 1 AM pool, then the system-level values for the number of AM instances must be multiplied by the number of AM pools to realize the actual limits specified on the system as a whole.

For example, if an application uses four separate AM pools to service the application, and a system-level configuration is used to limit the max AM pool size to 100, then this can result in a maximum of 400 AM instances (4 pools * 100 max pool size).

If the intent is to limit the entire application to a max pool size of 100, then the system-level configuration should specify a max pool size of 25 (100 max pool size / 4 pools). Finer granularity for configuring each AM pool can be achieved by configuring each pool separately through JDev or directly in the bc4j.xcfgfile.

Optimize the number of database connections.

By default, AM instances retain their database connections even when checked back into the AM pool. There are many performance benefits to maintain this association. To maintain performance, consider configuring more AM instances than the maximum number of specified database connections.


If you have an AM pool that needs to be used as the root pool, consider tuning at the specific AM pool level. For pools that are infrequently used, consider tuning pool sizes on the pool level so that top-level application parameters are not used. General AM Pool Configurations

Use the following guidelines as a general starting point when tuning AM and AM pool behavior. More specific tuning for memory or CPU usage can be found in Configuring Application Module Pool Sizing.

Table 9-10 AM Pool Tuning Parameters

Parameter Description

Initial Pool Size


Specifies the number of application module instances to create when the pool is initialized (default is zero). Setting a nonzero initial pool size increases the time to initialize the application, but improves subsequent performance for operations that require an AM instance.

Configure this value to 10% more than the anticipated number of concurrent AM instances that are required to service all users.

Maximum Pool Size


Specifies the maximum number of application module instances that the pool can allocate (default is 4096). The pool can never create more application module instances than the specified limit. A general guideline is to configure this to 20% more than the initial pool size to allow for some additional growth.

Minimum Available Size


The minimum number of available application module instances that the pool monitor should leave in the pool during a resource cleanup operation, when the server is under light load.

If you want the pool to shrink to contain no instances when all instances have been idle for longer than the idle time-out after a resource cleanup, set to 0 (zero).

The default is 5 instances.

While application module pool tuning allows different values for the jbo.ampool.minavailablesize | jbo.ampool.maxavailablesize parameters, in most cases it is fine to set these minimum and maximum tuning properties to the same value.

Maximum Available Size


The ideal maximum number of available application module instances in the pool when the server is under load.

When the pool monitor wakes up to do resource cleanup, it will try to remove available application module instances to bring the total number of available instances down to this ideal maximum. Instances that have been not been used for a period longer than the idle instance time-out always get cleaned up at this time. Then, additional available instances are removed, if necessary, to bring the number of available instances down to this size.

The default maximum available size is 25 instances. Configure this to leave the maximum number of available instances desired after a resource cleanup. A lower value generally results in more application module instances being removed from the pool during cleanup.

While application module pool tuning allows different values for the jbo.ampool.maxavailablesize | jbo.ampool.minavailablesize parameters, in most cases it is fine to set these minimum and maximum tuning properties to the same value.

Referenced Pool Size


Specifies the maximum number of application module instances in the pool that attempt to preserve session affinity for the next request made by the session that used them last before releasing them to the pool in managed-state mode (default is 10).

The referenced pool size should always be less than or equal to the maximum pool size. This enables the configured number of available instances to try and remain loyalto the affinity they have with the most recent session that released them in managed state mode.

Configure this value to the expected number of concurrent users that perform multiple operations with short think times. If there are no users expected to use the application with short think times, then this can be configured to 0 (zero) to eliminate affinity.

Maximum Instance Time to Live


The number of milliseconds after which to consider a connection instance in the pool as a candidate for removal during the next resource cleanup, regardless of whether it would bring the number of instances in the pool below minimum available size.

The default is 3600000 milliseconds of total time to live (which is 3600 seconds, or one hour). A lower value reduces the time an application module instance can exist before it must be removed at the next resource cleanup. The default value is sufficient for most applications. A higher value increases the time an application module instance can exist before it must be removed at the next cleanup.

Idle Instance Timeout


The number of milliseconds after which to consider an inactive application module instance in the pool as a candidate for removal during the next resource cleanup.

The default is 600000 milliseconds of idle time (which is 600 seconds or ten minutes). A lower value results in more application module instances being marked as a candidate for removal at the next resource cleanup. A higher value results in fewer application module instances being marked as a candidate for removal at the next resource cleanup.

Pool Polling Interval


The length of time in milliseconds between pool resource cleanup.

While the number of application module instances in the pool never exceeds the maximum pool size, available instances which are candidates for getting removed from the pool do not get cleaned upuntil the next time the application module pool monitor wakes up to do its job.

The default is to have the application module pool monitor wake up every 600000 milliseconds (which is 600 seconds or ten minutes). Configuring a lower interval results in inactive application module instances being removed more frequently to save memory. Configuring a higher interval results in less frequent resource cleanups.



Specifies whether to disable or enable failover. By default, failover is disabled. To enable failover, set the parameter to true.


When you enable application module state passivation, a failure can occur when Oracle WebLogic Server is configured to forcibly release the connection back into the pool. A failure of this type produces a SQLException (connection has already been closed) that is, saved to the server log. The exception is not reported through the user interface.

To ensure that state passivation occurs and changes are saved, set an appropriate value for the weblogic-application.xml deployment descriptor parameter inactive-connection-timeout-seconds on the <connection-check-params> pool-params element.

Setting the deployment descriptor parameter to several minutes, in most cases, should avoid forcing the inactive connection timeout and the resulting passivation failure. Adjust the setting as needed for your environment.

Locking Mode


Specifies the locking mode (optimistic or pessimistic). The default is pessimistic, which means that a pending transaction state can be created on the database with row-level locks. With pessimistic locking mode, each time an AM is recycled, a rollback is issued in the JDBC connection. Web applications should set the locking mode to optimistic to avoid creating the row-level locks.

Database Connection Pooling


Specifies whether the AM instance can be disconnected from the database connection when the AM instance is returned to the AM pool. This enables an application to size the AM pool larger than the database connection pool. The default is false, which means that an AM instance can retain its database connection when the AM instance is returned to the AM pool. When set to true, the AM can release the database connection back to the database connection pool when the AM instance is returned to the AM pool. Note that before an AM is disconnected from the database connection, a rollback can be issued on that database connection to revert any pending database state.

Transaction Disconnect Level


When used in conjunction with jbo.doconnectionpooling=true, it specifies BC4J behavior for maintaining JDBC ResultSets. By default, jbo.txn.disconnect_level is 0and you can use passivation to close any open ResultSets when the database connection is disconnected from the AM instance. Configuring jbo.txn.disconnect_level to 1 can prevent this behavior to avoid the passivation costs for this situation.

For parameters that can be configured for memory-constrained systems, see Table 9-11.

Table 9-11 AM Pool Sizing Configurations - Memory Considerations

Parameter Description

Initial Pool Size


Set this to a low value to conserve memory at the cost of slower performance when additional AM instances are required. The default value of 0 (zero) does not create any AM instances when the AM pool is initialized.

Maximum Pool Size


Configure this to prevent the number of AM instance from exceeding the determined value. However, if this is set too low then some users may see an error while accessing the application if no AM instances are available.

Minimum Available Pool Size


Set to 0 (zero) to shrink the pool to contain no instances when all instances have been idle for longer than the idle time out after a resource cleanup. However, a setting of 1 is commonly used to avoid the costs of re-creating the AM pool.

Maximum Available Pool Size


Configure this to leave the maximum number of available instances specified after a resource cleanup.

For parameters that can be configured to reduce the load on the CPU to some extent through a few parameters, see Table 9-12.

Table 9-12 AM Pool Sizing Configurations - CPU Considerations

Parameter Description


Set this value to the number of AM instances you want the application pool to start with. Creating AM instances during initialization takes the CPU processing costs of creating AM instances during the initialization instead of on-demand when additional AM instances are required.


Configure this value to maintain the AM instance's affinity to a user's session. Maintaining this affinity as much as possible saves the CPU processing cost of needing to switch an AM instance from one user session to another. Configuring Application Module Pool Sizing

The Application Module pool sizing configuration is largely dependant on the number of concurrent users you expect to have. To prevent performance issues, you need to make sure AM pool size is sufficient to serve all concurrent users.


The following example assumes at least 100 concurrent users. Always consult your own use case scenarios to determine the appropriate settings for your deployment.

To configure these parameters, open the setDomainEnv.sh file for the WebLogic Server instance and find these lines:


Replace these lines with the following:

-Doracle.jdbc.maxCachedBufferSize=19 ${JAVA_OPTIONS}"


To limit performance implications, set the ampool.maxavailablesize to a value that is at least 20% more than the maximum number of concurrent users you expect in your own use case scenarios. Configuring Application Module Pool Resource Cleanup

These parameters affect the frequency and characteristics for AM pool resource cleanups.

For memory-constrained systems, configure the AM pool to clean up more AM instances more frequently so that the memory consumed by the AM instance can be freed for other purposes. However, reducing the number of available AM instances and increasing the frequency of cleanups can result in higher CPU usage and longer response times. See Table 9-13 for more information.

Table 9-13 AM Pool Resource Cleanup Configurations - Memory Considerations

Parameter Description


A setting of 0 (zero) shrinks the pool to contain no instances when all instances have been idle for longer than the idle time out. However, a setting of 1 is commonly used to avoid the costs of recreating the AM pool.


A lower value generally results in more AM instances being removed from the pool during cleanup.


A lower value reduces the time an AM instance can exist before it must be removed at the next resource cleanup.


A low value results in more AM instances being marked as a candidate for removal at the next resource cleanup.


This controls how frequent resource cleanups can be triggered. Configuring a lower interval results in inactive AM instances being removed more frequently to save memory.

The AM pool can be configured to reduce the need for CPU processing by allowing more AM instances to exist in the pool for longer periods of time. This generally comes at the cost of consuming more memory.

Table 9-14 AM Pool Resource Cleanup Configurations - CPU Considerations

Parameter Description

jbo.ampool.minavailablesize and jbo.ampool.maxavailablesize

Setting these to a higher value leaves more idle instances in the pool, so that AM instances do not have to be recreated at a later time. However, the values should not be set excessively high to keep more AM instances than can be required at maximum load.


A higher value increases the time an AM instance can exist before it must be removed at the next resource cleanup.


A higher value results in fewer AM instances being marked as a candidate for removal at the next resource cleanup.


Configuring a higher interval results in less frequent resource cleanups. Designing an Application Module

Designing an application's module granularity is an important consideration that can significantly impact performance and scalability. It is important to note that each root application module generally holds its own database connection. If a user session consumes multiple root application modules, then that user session can potentially hold multiple database connections simultaneously. This can occur even if the connections are not actively being used, due to the general affinity maintained between an application module and a user session. To reduce the possibility that a user can hold multiple connections at once, consider the following options:

  • Design larger application modules to encompass all the functionality that a user needs.

  • Nest smaller application modules under a single root application module so that the same database connection can be shared among the nested application modules.

  • Use lazy loading for application modules. In the Application Module tuning section, customize runtime instantiation behavior to use lazy loading. Lazy loading can also be set JVM-wide by adding the following JVM argument:

    -Djbo.load.components.lazily=true Using ADFc Regions

Adding regions to a page can be a powerful addition to the application. While there is no limit to the number of remote regions that you can render in a JSF page, use this capability with caution. For simple pages, where tabs are not used, regions may be combined in the page such that the maximum number of regions is determined by the design of the region and the view object queries it executes. Alternatively, for complex pages that use tabs, limit the use of regions to achieve best performance. For complex tabbed pages, ADF does not deactivate task flow transactions once a region is loaded. When switching tabs, the ongoing transaction must be stopped to achieve best performance. Deferring Task Flow Execution

By default, task flows are activated when the page is loaded, even when the task flow is not initially rendered. This causes unnecessary overhead if the task flow is never displayed.


For regions and task flows, the amount of time it takes to evaluate the current viewId and the time it takes to calculate input parameters to the flow can impact your overall performance. Consider this during your design phase. Deferring Task Flow Creation in Popups

By default, the child components under a pop-up are created even when pop-up is not accessed. To avoid this overhead, consider the following:

  • Set childCreation to deferred

    Set childCreation="deferred" on the popup

    Set activation="deferred" on the task flow


    This approach cannot be used if any of the following tags are present inside the pop-up:

    • f:attribute

    • af:setPropertyListener

    • af:clientListener

    • af:serverListener

    It also cannot be used if you need to refer to any child components of the popup before the popup is displayed. Setting childCreation="deferred" postpones creating any child components of the popup and you cannot refer to them until after the popup is shown. In that case, use Conditional Activation.

  • Use conditional activation

    Add property listener on the popup in the jsff to set a condition

    Set activation="conditional" on the task flow

    Set activate=condition on the task flow Configuring the Task Flow Inside Switcher

By default, task flows under switchers are activated when the page is loaded, not when the switcher facet is displayed. To avoid this, use conditional activation and set active to an expression language (EL) expression that returns true when the facet is displayed. Reusing Static Data

If the application contains static data that can be reused across the application, the cache data can be collected by using a shared application module. For more information on creating and using shared application modules, see Sharing Application Module View Instances in Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework. Conditional Validations

For resource-intensive validations on entity attributes, consider using preconditions to selectively apply the validations only when needed. The cost of validation must be weighted against the cost of the precondition to determine if the precondition is beneficial to the performance. For more information on specifying preconditions for validation, see How to Set Preconditions for Validation in Oracle Fusion Middleware Developing Fusion Web Applications with Oracle Application Development Framework.