The following sections describe the data models on which the REST resources operate. These data models describe the information exchanged in REST resources.
This entity represents errors and exceptions.
The properties of the java.lang.Throwable entity are as follows:
This property contains the stack trace of errors and exceptions.
Type: java.lang.Throwable
This property contains the reason why the error or exception was thrown.
Type: string
This entity represents a date as a string in ISO 8601 format, yyyy-MM-ddTHH:mm:ss.SSSX
This entity represents a JSONObject with a property for each property in the properties object, where the key is the property's name the the value is a string containing the property's value.
This entity represents the health of the services that are in a WebLogic server domain. Selected subsystems within each WebLogic Server instance monitor their health status based on criteria specific to the subsystem.
The properties of the weblogic.health.HealthState entity are as follows:
This property indicates the partition name for which the health state is reported.
Type: string
This property indicates the reported state as:
OK - Service is healthy.
WARN - Service could have problems in the future
CRITICAL - Something must be done now to prevent service failure
FAILED - Service has failed and must be restarted
OVERLOADED - Service is functioning normally but there is too much work in it
UNKNOWN - Service state cannot be determined
Type: string
This property indicates the service for which the health state is reported.
Type: string
This property idicates the cause ot the reported state.
Type: array of weblogic.health.Symptom
This entity represents an observation reported by a service with its health state. A symptom can be used to determine the reason for the current health state of a WebLogic server.
The properties of the weblogic.health.Symptom entity are as follows:
This property provides additional information about the symptom if available.
Type: string
This property represents an identifier for the symptom.
Type: string
This property indicates a low, medium, or high severity level.
Type: string
This property represents the cause of the symptom (low memory, network error, stuck threads, and so on).
Type: string
The authenticated user that is making the request.
The properties of the weblogic.management.rest.bean.model.CurrentUser entity are as follows:
The ID of the partition where the component that is being invoked resides.
Type: string
The human readable name of the partition ID.
Type: string
The login of the user making this request, if the user has been authenticated, or null
if the user has not been authenticated.
Type: string
A Version entity describes a version of the WebLogic Server resources.
The properties of the weblogic.management.rest.bean.model.Version entity are as follows:
True
if this is the default version.
Type: boolean
The lifecycle of this version: active
or deprecated
Type: string
The name of this version.
Type: string
This MBean provides deployment operations for an application. Currently only start and stop are supported. In the future, this MBean may be enhanced with operations to support deployment applications to the domain as well as extended WLS deployment features such as production redeployment and partial deployment of modules in an enterprise application.
The properties of the weblogic.management.runtime.AppDeploymentRuntimeMBean entity are as follows:
The application's name.
Type: string
Constraints: Read Only, Restart Required
The application's version identifier.
Type: string
Constraints: Read Only, Restart Required
The list of modules for the application. These modules can be used in module level targeting.
Type: array of string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The name of the partition the application is in.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides access to runtime state for deployed applications.
The properties of the weblogic.management.runtime.AppRuntimeStateRuntimeMBean entity are as follows:
Type: array of string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.BatchJobRepositoryRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Runtime services for the console.
The properties of the weblogic.management.runtime.ConsoleRuntimeMBean entity are as follows:
Is the console enabled?
Type: boolean
Constraints: Read Only, Restart Required
Gets the URL for the console's home page
Type: string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This MBean provides deployment operations.
A DeploymentManager object is a stateless interface into the WebLogic Server deployment framework. It currently provides access to the AppDeploymentRuntimeMBeans that allow the user to start and stop deployments. In the future, this MBean may be enhanced with operations to support deployment applications to the domain, as well as extended WebLogic Server deployment features, such as production redeployment and partial deployment of modules in an enterprise application.
This MBean emits notifications when an application is created or removed and when the application state changes. The notification types are:
appdeployment.created
appdeployment.deleted
appdeployment.state.new
appdeployment.state.prepared
appdeployment.state.admin
appdeployment.state.active
appdeployment.state.retired
appdeployment.state.failed
appdeployment.state.update.pending
appdeployment.state.unknown
The userdata is the object name of the application.
The properties of the weblogic.management.runtime.DeploymentManagerMBean entity are as follows:
The maximum number of progress objects allowed.
Type: int
Constraints: Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This MBean is the user API for monitoring deployment operations and exists only on an Administration Server. Currently only start and stop operations initiated by AppDeploymentRuntimeMBean are supported.
The properties of the weblogic.management.runtime.DeploymentProgressObjectMBean entity are as follows:
The name of the application for the current deployment operation.
Type: string
Constraints: Read Only, Restart Required
This property indicates whether an asynchronous job has completed.
Type: boolean
Provides an ordered array of status messages generated for the current deployment operation.
Type: array of string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The targets on which the current deployment operation failed.
Type: array of string
Constraints: Read Only, Restart Required
The unique ID for the current deployment operation.
Type: string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The deployment operation type for the current deployment operation. Possible values are 1 (start) and 2 (stop).
Type: int
Constraints: Read Only, Restart Required
This property indicates whether an asynchronous job has succeeded, failed, or is in progress.
Type: string
If the current deployment operation has failed, this method may return zero or more exception(s) which represent the root cause of the failure. The array will not contain WLS exception classes; instead they will be new Exceptions containing the stack traces and messages from the original WLS Exceptions.
Type: array of java.lang.Throwable
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time that the current deployment operation began. The value is in milliseconds consistent with the system time.
Type: long
Constraints: Read Only, Restart Required
The state of the current deployment operation. Possible values are STATE_INITIALIZED, STATE_RUNNING, STATE_COMPLETED, STATE_FAILED and STATE_DEFERRED.
Type: string
Constraints: Read Only, Restart Required
The targets specified for the current deployment operation.
Type: array of string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This class is used for domain level partition handling.
The properties of the weblogic.management.runtime.DomainPartitionRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns partition ID value for corresponding partition.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This class is used for monitoring a WebLogic domain. A domain may contain zero or more clusters. A cluster may be looked up by a logical name.
The properties of the weblogic.management.runtime.DomainRuntimeMBean entity are as follows:
The time when the domain became active.
Type: java.util.Date
Constraints: Read Only, Restart Required
Returns the domain partition runtime MBean for the "current" partition
Type: weblogic.management.runtime.DomainPartitionRuntimeMBean reference
Constraints: Read Only, Restart Required
The user-specified name of this MBean instance.
This name is included as one of the key properties in the MBean's javax.management.ObjectName
Name=
user-specified-name
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.EditSessionConfigurationManagerMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.EditSessionConfigurationRuntimeMBean entity are as follows:
The original creator of the edit session.
Type: string
Constraints: Read Only, Restart Required
The current editor of the edit session. The editor owns the lock.
Type: string
Constraints: Read Only, Restart Required
The description of the edit session configuration.
Type: string
Constraints: Read Only, Restart Required
The name of the edit session configuration.
Type: string
Constraints: Read Only, Restart Required
The JNDI name of the related EditSessionServer
Type: string
Constraints: Read Only, Restart Required
Returns true
if another edit session activates its changes after the last activation of this edit session or after its creation but before this edit session was ever activated.
It indicates that this edit session configuration is probably not the actual runtime configuration. Use the resolve method to merge changes to this configuration.
If this edit session configuration was also modified then there can be conflicts between this session and the runtime configuration. Use the resolve method to remove possible inconsistencies.
Type: boolean
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The partition name to which this edit session belongs.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.ElasticServiceManagerRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This MBean provides deployment operations for a library..
The properties of the weblogic.management.runtime.LibDeploymentRuntimeMBean entity are as follows:
The library's implementation version, null if none is set
Type: string
Constraints: Read Only, Restart Required
The library's identifier.
Type: string
Constraints: Read Only, Restart Required
The library's name.
Type: string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The name of the partition the library is in.
Type: string
Constraints: Read Only, Restart Required
The library's specification version, null if none is set
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This interface defines the control operations for a log in the WebLogic Server.
The properties of the weblogic.management.runtime.LogRuntimeMBean entity are as follows:
Gets the opened state of the log file stream represented by this instance.
Type: boolean
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This interface contains controls to suspend and resume the MDBs. This RuntimeMBean is deployed only on the AdminServer.
The properties of the weblogic.management.runtime.MessageDrivenControlEJBRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This class is used for monitoring the Migratable Service Coordinator.
The properties of the weblogic.management.runtime.MigratableServiceCoordinatorRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Runtime information about one past or ongoing migration.
The properties of the weblogic.management.runtime.MigrationDataRuntimeMBean entity are as follows:
Name of the server that acted as the cluster master for this migration.
Type: string
Constraints: Read Only, Restart Required
Name of the server that acted as the cluster master for this migration.
Type: string
Constraints: Read Only, Restart Required
Machine from which the server was migrated from
Type: string
Constraints: Read Only, Restart Required
Machine to which the server was migrated to or is in the process of being migrated to.
Type: string
Constraints: Read Only, Restart Required
Get all the machines attempted for migration.
Type: array of string
Constraints: Read Only, Restart Required
End time of migration
Type: long
Constraints: Read Only, Restart Required
Start time of migration
Type: long
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Name of the server migrated
Type: string
Constraints: Read Only, Restart Required
Name of the server migrated
Type: int
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods for retrieving runtime information about a server instance and for transitioning a server from one state to another.
The properties of the weblogic.management.runtime.NodeManagerRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Type: boolean
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods that transition partitions from one state to another. This class is instantiated once for each partition but only on the Administration Server. Even so, you can use a partition's instance to change the state of the partition on Managed Servers as well as on the Administration Server.
Detecting when Operations Complete
Methods representing operations on partitions return a PartitionLifeCycleTaskRuntimeMBean object. The caller should monitor the returned instance, invoking its PartitionLifeCycleTaskRuntimeMBean#isRunning() method to detect when the operation has completed. In particular, the caller should not rely on the value returned from getState() to indicate when an operation on a partition that is targeted to multiple servers has finished. That value will be accurate as described in detail on getState() but can change before the operation has finished.
Desired States
The system tracks the desired state for each partition, which defaults to the state SHUTDOWN
and substate HALTED
. Whenever a lifecycle operation method is called the system not only performs the requested action on the partition but also records the resulting state as the new desired state for the partition.
The system uses the desired state for a partition to bring the partition to the correct state during server restart. It can also be used when the getState() method computes the overall state for the partition.
The properties of the weblogic.management.runtime.PartitionLifeCycleRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The current overall state of the partition.
The value returned is the highest state for the partition on all servers where it is targeted. As a result, the overall partition state can change (for example, to RUNNING
) as soon as the operation (such as start) has finished on one server, even while the operation is still in progress elsewhere.
If the partition is not currently targeted to any running server then its reported state is the desired state indicated by the most recent partition life cycle operation on the partition.
Type: string
Constraints: Read Only, Restart Required
The current substate of the partition. It is mostly useful for knowing whether the partition is completely shutdown and the administrative resource groups are not running, in which case this method returns HALTED
, or if the partition is in the SHUTDOWN.BOOTED
state and the administrative resource groups are running, in which case this method returns BOOTED
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Exposes information about a long-running task related to the partition life cycle.
The properties of the weblogic.management.runtime.PartitionLifeCycleTaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the name of the current operation.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
Returns the name of the partition being operated on.
Type: string
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
Returns the name of the server on which operation happens.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
This class is used for partition user file system handling.
The properties of the weblogic.management.runtime.PartitionUserFileSystemManagerMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods that transition resource groups from one state to another. This class is instantiated once for each resource group but only on the Administration Server. Even so, you can use a resource group's instance to change the state of the resource group on Managed Servers as well as on the Administration Server.
Detecting when Operations Complete
Methods representing operations on resource groups return a ResourceGroupLifeCycleTaskRuntimeMBean object. The caller should monitor the returned instance, invoking its ResourceGroupLifeCycleTaskRuntimeMBean#isRunning() method to detect when the operation has completed. In particular, the caller should not rely on the value returned from getState() to indicate when an operation on a resource group that is targeted to multiple servers has finished. That value will be accurate as described in detail on getState() but can change before the operation has finished.
Desired States
The system tracks the desired state for each resource group, which defaults to the state RUNNING
. Whenever a lifecycle operation method is called the system not only performs the requested action on the resource group but also records the resulting state as the new desired state for the resource group.
The system uses the desired state for a resource group to bring the resource group to the correct state during server and partition start-up. The desired can also be used when the getState() method computes the overall state for the resource group.
The properties of the weblogic.management.runtime.ResourceGroupLifeCycleRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The current overall state of the resource group.
The value returned is the highest state for the resource group on all servers where it is targeted. As a result, the overall resource group state can change (for example, to RUNNING
) as soon as the operation (such as start) has finished on one server, even while the operation is still in progress elsewhere.
If the resource group is not currently targeted to any running server then its reported state is the desired state indicated by the most recent resource group life cycle operation on the resource group.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.ResourceGroupLifeCycleTaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the name of the current operation.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the name of the resource group being operated on.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
Returns the name of the server on which operation happens.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.RolloutServiceRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Runtime information for an SNMP agent that is running in the current WebLogic Server domain.
The properties of the weblogic.management.runtime.SNMPAgentRuntimeMBean entity are as follows:
Gets the name of the SNMPAgent MBean configuration that is currently active. Returns null if no SNMPAgent configuration is currently active on this Server.
Type: string
Constraints: Read Only, Restart Required
The UDP port on which this SNMP agent is listening for incoming requests from SNMP managers.
SNMP agents can also communicate through the host server's TCP listen port (7001 by default) or through a TCP port that is configured by a custom network channel.
Type: int
Constraints: Read Only, Restart Required
The number of attribute change notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The number of counter monitor notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The number of requests that this agent has rejected because of incorrect user credentials.
Type: int
Constraints: Read Only, Restart Required
The number of requests that this agent has rejected because an authenticated user does not have sufficient privileges to view the requested information. You use the WebLogic Server security realm to assign privileges to users.
Type: int
Constraints: Read Only, Restart Required
The number of requests that this agent has rejected because of incorrect privacy (encryption) credentials
Type: int
Constraints: Read Only, Restart Required
The number of gauge monitor notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The number of log message notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The port that this SNMP agent uses to communicate with subagents.
The agent uses subagents to provide access to custom MBeans (MBeans that you create and register) and to other Oracle software components. WebLogic Server SNMP agents do not enable users to register their own subagents.
Type: int
Constraints: Read Only, Restart Required
The total number of all notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Indicates whether this SNMP agent is running.
Type: boolean
Constraints: Read Only, Restart Required
The number of serverStart notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The number of serverShutdown notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
The number of string monitor notifications that this SNMP agent has sent to all trap destinations since the agent's host server was started.
Type: long
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.ScalingTaskRuntimeMBean entity are as follows:
Type: string
Constraints: Read Only, Restart Required
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
Type: array of string
Constraints: Read Only, Restart Required
Type: string
Constraints: Read Only, Restart Required
Type: java.util.Properties
Constraints: Read Only, Restart Required
Type: array of string
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Type: boolean
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods that transition servers from one state to another. This class is instantiated only on the Administration Server, but you can use it to transition the states of Managed Servers as well as Administration Servers.
You cannot use it to start an Administration Server, and if you want to use it to start Managed Servers, you must first set up a Node Manager on each Managed Server's host machine.
If you want to use the methods that transition a server into the ADMIN
state, you must first set up an administration channel for that server.
The properties of the weblogic.management.runtime.ServerLifeCycleRuntimeMBean entity are as follows:
The Oracle Middleware installation directory.
Type: string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Number of times the server has been restarted using the NodeManager since creation. The first start does not count. The count is valid only if the NodeManager is used to start and restart the server everytime.
Type: int
Constraints: Read Only, Restart Required
The current state of the server.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The directory where the WebLogic Server instance (server) is installed, without the trailing "/server".
Type: string
Constraints: Read Only, Restart Required
Exposes monitoring information about a server's lifecycle. Remote clients as well as clients running within a server can access this information.
An operation (task) to change a server's state will fork a separate thread to perform the actual work and immediately return an instance of this MBean to the caller. The caller can then use this MBean to track the task's progress as desired.
The properties of the weblogic.management.runtime.ServerLifeCycleTaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Gets the name of the method that was invoked on the ServerLifeCycleRuntime to initiate this task.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
The name of the server.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods for retrieving runtime information about a server instance and for transitioning a server from one state to another.
The properties of the weblogic.management.runtime.ServerRuntimeMBean entity are as follows:
Indicates whether the default SSL listen port is enabled on the server
Type: boolean
Constraints: Read Only, Restart Required
The time when the server was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether the server is an Administration Server.
Type: boolean
Constraints: Read Only, Restart Required
The address on which the Administration Server is listening for connections. For example, this might return the string: santiago
Type: string
Constraints: Read Only, Restart Required
The port on which the Administration Server is listening for connections.
Type: int
Constraints: Read Only, Restart Required
Indicates whether the port that the server uses for administrative traffic is configured to use a secure protocol.
Type: boolean
Constraints: Read Only, Restart Required
Indicates whether the administration port is enabled on the server
Type: boolean
Constraints: Read Only, Restart Required
The URL that the server and its clients use for administrative connections.
If no administration channel is enabled, then this method returns the URL for connections through the default channel. If the default channel is de-activated, this method returns the URL for a secure channel. If no secure channel is enabled, the method returns null.
The returned URL will be consistent with dynamic channel updates.
Type: string
Constraints: Read Only, Restart Required
The absolute path of the directory from which the server was started.
This may be used in conjunction with other relative paths in ServerMBean to compute full paths.
Type: string
Constraints: Read Only, Restart Required
Return the machine on which the server is running. This will be different from the configuration if the server gets migrated automatically.
Type: string
Constraints: Restart Required
The URL that clients use to connect to this server's default network channel.
The returned value indicates the default protocol, listen address and listen port:
protocol://listen-addresslisten-port
Note: The default protocol, listen address and listen port are persisted in the domain's config.xml
file, however when a server instance is started, command-line options can override these persisted values. This getDefaultURL
method returns the URL values that are currently being used, not necessarily the values that are specified in config.xml
The returned URL will be consistent with dynamic channel updates.
Type: string
Constraints: Read Only, Restart Required
The health state of the server as reported by the server's self-health monitoring.
For example, the server can report if it is overloaded by too many requests, if it needs more memory resources, or if it will soon fail for other reasons.
Type: weblogic.health.HealthState
Constraints: Read Only, Restart Required
Indicates whether the default listen port is enabled on the server.
Type: boolean
Constraints: Read Only, Restart Required
The Oracle Middleware installation directory.
Type: string
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The current number of sockets registered for socket muxing on this server.
Type: int
Constraints: Read Only, Restart Required
Determine the overall health state of this server, taking into account the health of each of its subsystems.
Type: weblogic.health.HealthState
Constraints: Read Only, Restart Required
Indicates whether the server must be restarted in order to activate configuration changes.
Type: boolean
Constraints: Read Only, Restart Required
Get the classpath for this server including domain/lib contents that are automatically picked up and appended to the classpath.
Type: string
Constraints: Read Only, Restart Required
The current life cycle state of this server.
For example, a server can be in a RUNNING state in which it can receive and process requests or in an ADMIN state in which it can receive only administrative requests.
Type: string
Constraints: Read Only, Restart Required
Returns current state of the server as in integer. weblogic.management.runtime.ServerStates has more information about the available server states
Type: int
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
The directory where the WebLogic Server instance (server) is installed, without the trailing "/server".
Type: string
Constraints: Read Only, Restart Required
The version of this WebLogic Server instance (server).
Type: string
Constraints: Read Only, Restart Required
Runtime information about one past or ongoing migration.
The properties of the weblogic.management.runtime.ServiceMigrationDataRuntimeMBean entity are as follows:
Name of the cluster
Type: string
Constraints: Read Only, Restart Required
Name of the server that acted as the coordinator for this migration.
Type: string
Constraints: Read Only, Restart Required
Get all the destinations attempted for migration.
Type: array of string
Constraints: Read Only, Restart Required
Where this object was migrated from
Type: string
Constraints: Read Only, Restart Required
Where this object was migrated to
Type: string
Constraints: Read Only, Restart Required
End time of migration
Type: long
Constraints: Read Only, Restart Required
Start time of migration
Type: long
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Name of the object migrated
Type: string
Constraints: Read Only, Restart Required
Status of the migration (SUCCESSFUL, IN_PROGRESS, or FAILED)
Type: int
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Provides methods that transition system component from one state to another. This class is instantiated only on the Administration Server, but you can use it to transition the states of all managed system component servers.
To start system components, you must first configure a Node Manager on each component's host machine.
The properties of the weblogic.management.runtime.SystemComponentLifeCycleRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The number of times the server has been restarted using the Node Manager since its creation. The first start does not count. The count is valid only if the Node Manager is used to start and restart the server every time.
Type: int
Constraints: Read Only, Restart Required
The current state of the server.
Server states are described in "Managing Server Startup and Shutdown for Oracle WebLogic Server."
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Exposes monitoring information about a system component's life cycle.
An operation (task) to change a system component's state will fork a separate thread to perform the actual work and immediately return an instance of this MBean to the caller. The caller can then use this MBean to track the task's progress as desired.
The properties of the weblogic.management.runtime.SystemComponentLifeCycleTaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Gets the name of the method that was invoked on the ServerLifeCycleRuntime to initiate this task.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
The name of the server.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Exposes monitoring information about an ongoing and potentially long-running administrative process. This should be taken to mean, at minimum, any OA&M operation involving I/O. Examples include starting and stopping servers, deploying and undeploying applications, or migrating services.
An MBean operation of this sort should fork a separate thread to perform the actual work and immediately return an instance of TaskRuntimeMBean
to the caller. The caller can then use this to track the task's progress as desired. Users can also query for all instances of TaskRuntimeMBean
to get a summary of both currently-running and recently-completed tasks.
Instance of TaskRuntimeMBean
continue to exist in the MBeanServer after the completion of the work they describe. They will eventually either be explicitly deregistered by the user, or removed by a scavenger process which periodically purges instances of TaskRuntimeMBean
that have been completed for some time.
The properties of the weblogic.management.runtime.TaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
TaskRuntimeMBean for any workflow (WorkflowProgress) executed using management orchestration framework.
The properties of the weblogic.management.runtime.WorkflowTaskRuntimeMBean entity are as follows:
This property indicates whether an asynchronous job has completed.
Type: boolean
A description of this task.
Type: string
Constraints: Read Only, Restart Required
This property indicates the time when the asynchronous job ended.
Type: java.util.Date
Lists all errors in the workflow.
Type: array of java.lang.Throwable
Constraints: Read Only, Restart Required
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Number of completed commands in the workflow. Together with {@code getNumTotalCommands()} defines kind of progress information.
Type: int
Constraints: Read Only, Restart Required
Number of all commands in the workflow. Together with {@code getNumCompletedCommands()} defines kind of progress information.
Type: int
Constraints: Read Only, Restart Required
The task of which this task is a part.
A value of null
indicates that this task is not a subtask.
Type: weblogic.management.runtime.TaskRuntimeMBean reference
Constraints: Read Only, Restart Required
The progress of this task.
Type: string
Constraints: Read Only, Restart Required
Human-readable message containing information about the current workflow progress.
Type: string
Constraints: Read Only, Restart Required
Indicates whether the task is still running.
Type: boolean
Constraints: Read Only, Restart Required
This property indicates the time when an asynchronous job was started.
Type: java.util.Date
The time at which this task was started.
Type: long
Constraints: Read Only, Restart Required
Provides step by step information (log) about the progress of the workflow.
Type: string
Constraints: Read Only, Restart Required
Indicates whether this task was initiated by the server versus a user.
Type: boolean
Constraints: Read Only, Restart Required
Returns an exception describing the error, if any, that occurred while performing this task.
Type: java.lang.Throwable
Constraints: Read Only, Restart Required
The status of this task.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required
Each workflow has a unique id.
Type: string
Constraints: Read Only, Restart Required
User defined name of this workflow.
Type: string
Constraints: Read Only, Restart Required
Returns the target that was specified when the workflow was created. It will typically be either the name of the domain, of one or more clusters, or one or more servers.
Type: string
Constraints: Read Only, Restart Required
Returns a string that can be used to identify the different types of workflows.
Type: string
Constraints: Read Only, Restart Required
The properties of the weblogic.management.runtime.WseePolicySubjectManagerRuntimeMBean entity are as follows:
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
Type: string
Constraints: Read Only, Restart Required
Returns the type of the MBean.
Type: string
Constraints: Read Only, Restart Required