A resource group is a named collection of deployable resources. Typically the resources in a given resource group are related in some way, for example in that they make up a single application suite.
Since | 12.2.1.0.0 | ||
Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.ResourceGroupMBean
|
||
Factory Methods | |||
Access Points Inherited from ResourceGroupTemplateMBean |
Because this MBean extends or implements ResourceGroupTemplateMBean, you can also access this MBean by retrieving ResourceGroupTemplateMBeans. The following attributes contain ResourceGroupTemplateMBeans and its subtypes:
|
This section describes attributes that provide access to other MBeans.
The collection of deployable entities in this resource group template.
Factory Methods | No explicit creator method. The child shares the lifecycle of its parent. |
Lookup Operation | lookupAppDeployment(String name)
Returns a |
Privileges | Read only |
Type | AppDeploymentMBean[] |
Relationship type: | Containment. |
The CoherenceClusterSystemResourceMBeans that have been defined for this resource group template.
Deprecated.
Factory Methods | createCoherenceClusterSystemResource
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupCoherenceClusterSystemResource(String name)
Returns a |
Privileges | Read only |
Type | CoherenceClusterSystemResourceMBean[] |
Relationship type: | Containment. |
The file stores defined in this resource group template.
Factory Methods | createFileStore
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupFileStore(String name)
Returns a |
Privileges | Read only |
Type | FileStoreMBean[] |
Relationship type: | Containment. |
The Foreign JNDI Providers defined for this resource group template.
Factory Methods | createForeignJNDIProvider
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupForeignJNDIProvider(String name)
Returns a |
Privileges | Read only |
Type | ForeignJNDIProviderMBean[] |
Relationship type: | Containment. |
The JDBCStores defined in this resource group template.
Factory Methods | createJDBCStore
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupJDBCStore(String name)
Returns a |
Privileges | Read only |
Type | JDBCStoreMBean[] |
Relationship type: | Containment. |
The JDBCSystemResourceMBeans that have been defined for this resource group template.
Factory Methods | createJDBCSystemResource
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupJDBCSystemResource(String name)
Returns a |
Privileges | Read only |
Type | JDBCSystemResourceMBean[] |
Relationship type: | Containment. |
The JMSBridgeDestinations for this resource group template.
Factory Methods | createJMSBridgeDestination
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupJMSBridgeDestination(String name)
Returns a |
Privileges | Read only |
Type | JMSBridgeDestinationMBean[] |
Relationship type: | Containment. |
Define JMSServers for this resource group template.
Factory Methods | createJMSServer
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupJMSServer(String name)
Returns a |
Privileges | Read only |
Type | JMSServerMBean[] |
Relationship type: | Containment. |
The JMSSystemResourceMBeans that have been defined for this resource group template.
Factory Methods | createJMSSystemResource
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupJMSSystemResource(String name)
Returns a |
Privileges | Read only |
Type | JMSSystemResourceMBean[] |
Relationship type: | Containment. |
Define libraries for this resource group template.
Factory Methods | No explicit creator method. The child shares the lifecycle of its parent. |
Lookup Operation | lookupLibrary(String name)
Returns a |
Privileges | Read only |
Type | LibraryMBean[] |
Relationship type: | Containment. |
The MailSessions for this resource group template.
Factory Methods | createMailSession
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupMailSession(String name)
Returns a |
Privileges | Read only |
Type | MailSessionMBean[] |
Relationship type: | Containment. |
All the ManagedExecutorServices.
Factory Methods | createManagedExecutorService
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupManagedExecutorService(String name)
Returns a |
Privileges | Read only |
Type | ManagedExecutorServiceMBean[] |
Relationship type: | Containment. |
All the ManagedScheduledExecutorService.
Factory Methods | createManagedScheduledExecutorService
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupManagedScheduledExecutorService(String name)
Returns a |
Privileges | Read only |
Type | ManagedScheduledExecutorServiceMBean[] |
Relationship type: | Containment. |
All the ManagedThreadFactories.
Factory Methods | createManagedThreadFactory
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupManagedThreadFactory(String name)
Returns a |
Privileges | Read only |
Type | ManagedThreadFactoryMBean[] |
Relationship type: | Containment. |
The MessagingBridgeMBean representing the messaging bridges that have been configured to be part of this resource group template.
Factory Methods | createMessagingBridge
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupMessagingBridge(String name)
Returns a |
Privileges | Read only |
Type | MessagingBridgeMBean[] |
Relationship type: | Containment. |
OSGi framework definition for use by applications wishing to share services and code
Factory Methods | createOsgiFramework
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupOsgiFramework(String name)
Returns a |
Privileges | Read only |
Type | OsgiFrameworkMBean[] |
Relationship type: | Containment. |
The resource group template referenced by this resource group.
Privileges | Read/Write |
Type | ResourceGroupTemplateMBean |
Relationship type: | Reference. |
The SAFAgentMBeans for this resource group template
Factory Methods | createSAFAgent
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupSAFAgent(String name)
Returns a |
Privileges | Read only |
Type | SAFAgentMBean[] |
Relationship type: | Containment. |
A list of all the targets.
Lookup Operation | lookupTarget(String name)
Returns a |
Privileges | Read/Write |
Type | TargetMBean[] |
Relationship type: | Reference. |
The WLDFSystemResourceMBeans that have been defined for this resource group template
Factory Methods | createWLDFSystemResource
(java.lang.String name)
Factory methods do not return objects. |
Lookup Operation | lookupWLDFSystemResource(String name)
Returns a |
Privileges | Read only |
Type | WLDFSystemResourceMBean[] |
Relationship type: | Containment. |
This section describes the following attributes:
Does this resource group contain administrative applications and resources? If true, then this is considered an administrative resource group and will be handled differently by the partition lifecycle. Specifically, an administrative resource group will be left running when a partition is shut down (it will be shut down only when the partition is halted).
Note that this Boolean is independent of the targeting of the
resource group and works independently of the
autoTargetAdminServer
Boolean.
Available Since | Release 12.2.1.1.0 |
Privileges | Read/Write |
Type | boolean |
Should this resource group always be targeted to the Administration Server? If true, then this resource group will be targeted to the domain's Administration Server using the partition's administrative virtual target (AdminVT) in addition to any targets explicitly set on the resource group. Functionally, this is similar to getting the partition's administrative virtual target and explicitly adding it to the list of resource group targets.
Available Since | Release 12.2.1.1.0 |
Privileges | Read/Write |
Type | boolean |
Private property that disables caching in proxies.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return whether the MBean was created dynamically or is persisted to config.xml
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the unique id of this MBean instance
Privileges | Read only |
Type | long |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the MBean info for this MBean.
Deprecated.
Privileges | Read only |
Type | javax.management.MBeanInfo |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Server saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
Note: If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
Privileges | Read/Write |
Security roles | Write access is granted only to the following roles:
|
Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
Privileges | Read only |
Type | weblogic.management.WebLogicObjectName |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
Privileges | Read/Write |
Type |
Returns false if the MBean represented by this object has been unregistered.
Deprecated.
Privileges | Read only |
Type | boolean |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return all tags on this Configuration MBean
Available Since | Release 12.2.1.0.0 |
Privileges | Read/Write |
Type | class java.lang.String[] |
Returns the type of the MBean.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The directory path on the Administration Server where the uploaded applications for this resource group template are placed.
Privileges | Read/Write |
Type | java.lang.String |
Checks whether this resource group uses the default target from the partition that contains the resource group.
Privileges | Read/Write |
Type | boolean |
Default Value | true |
This section describes the following operations:
Add a tag to this Configuration MBean. Adds a tag to the current set of tags on the Configuration MBean. Tags may contain white spaces.
Operation Name | "addTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
Add an existing target to the list of targets.
Operation Name | "addTarget" |
Parameters | Object [] { target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
void
|
Returns the targets actually used by this resource group, accounting for partition-level defaulting.
Operation Name | "findEffectiveTargets" |
Parameters | null |
Signature | null |
Returns |
class |
Security roles |
Only the following roles can invoke this operation:
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
Note: To insure that you are freezing the default value, invoke
the restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Return all properties' names whose value is inherited from template mbean. this is a convenient method to get inheritance info on multiple properties in one jmx call.
Operation Name | "getInheritedProperties" |
Parameters | Object [] { propertyNames }
where:
|
Signature | String [] {
"[Ljava.lang.String;" } |
Returns |
class |
Check if the value of a property is inherited from template mbean or not.
Operation Name | "isInherited" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Remove a tag from this Configuration MBean
Operation Name | "removeTag" |
Parameters | Object [] { tag }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Exceptions |
|
Remove the given target from the list of targets.
Operation Name | "removeTarget" |
Parameters | Object [] { target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
void
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] { attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
Exceptions |
|
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] { propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|