UserPasswordCredentialMapExtendedReaderMBean (Abstract)


Overview  |   Related MBeans  |   Attributes  |   Operations

Overview

Provides a set of methods for reading the credential mappings. Credential mappings match WebLogic users to remote usernames and passwords.

       
Fully Qualified Interface NameIf you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.security.credentials.UserPasswordCredentialMapExtendedReaderMBean
Factory Methods No factory methods. Instances of this MBean are created automatically.
Subtypes The following MBeans extend or implement this MBean type:


Operations

This section describes the following operations:


advance

Advances the list to the next element in the list.

   
Operation Name"advance"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor returned from a previous list method.

SignatureString [] { "java.lang.String" }
Returns void
Exceptions
  • weblogic.management.utils.InvalidCursorException

close

Indicates that the caller is finished using the list, and that the resources held on behalf of the list may be released. If the caller traverses through all the elements in the list, the caller need not call this method. In other words, it is used to let the caller close the list without reading each element that is returned.

   
Operation Name"close"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor returned from a previous list method.

SignatureString [] { "java.lang.String" }
Returns void
Exceptions
  • weblogic.management.utils.InvalidCursorException

getCurrentCredentialRemotePassword

Gets a password from a list that has been returned from the listCredentials method. This method returns the password that corresponds to current location in the list. Deprecated in WLS 9.0

Deprecated. 9.0.0.0

   
Operation Name"getCurrentCredentialRemotePassword"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor that has been returned from the listCredentials method.

SignatureString [] { "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.InvalidCursorException

getCurrentCredentialRemoteUserName

Gets a remote username from a list that has been returned from the listCredentials method. This method returns the remote username that corresponds to current location in the list.

   
Operation Name"getCurrentCredentialRemoteUserName"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor that has been returned from the listCredentials method.

SignatureString [] { "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.InvalidCursorException

getCurrentMappingRemoteUserName

Gets an remote username from a credentials mapping that has been returned from the listMappings method. This method returns the remote username that corresponds to current location in the list.

   
Operation Name"getCurrentMappingRemoteUserName"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor that has been returned from the listMappings method.

SignatureString [] { "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.InvalidCursorException

getCurrentMappingResourceID

Gets an resource id from a credentials map that has been returned from the listMappingsByPattern method. This method returns the resource id that corresponds to current location in the list.

   
Operation Name"getCurrentMappingResourceID"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor that has been returned from the listMappings method and the listMappingsByPattern.

SignatureString [] { "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.InvalidCursorException

getCurrentMappingWLSUserName

Gets a webLogic username from a credentials mapping that has been returned from the listMappings method. This method returns the local webLogic username that corresponds to current location in the list.

   
Operation Name"getCurrentMappingWLSUserName"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor that has been returned from the listMappings method.

SignatureString [] { "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.InvalidCursorException

getRemotePassword

Gets the remote password corresponding to the remote username in the credential created for the specified resource. Deprecated in WLS 9.0

Deprecated. 9.0.0.0

   
Operation Name"getRemotePassword"
ParametersObject [] {  resourceIdremoteUserName }

where:

  • resourceId is an object of type java.lang.String that specifies:

    - The resource for which the credential was created.

  • remoteUserName is an object of type java.lang.String that specifies:

    - The external username.

SignatureString [] { "java.lang.String", "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.NotFoundException

getRemoteUserName

Gets the external username that is mapped to a local webLogic username for the specified resource.

   
Operation Name"getRemoteUserName"
ParametersObject [] {  resourceIdwlsUserName }

where:

  • resourceId is an object of type java.lang.String that specifies:

    - The resource on which the mapping between the local weblogic user and the remote user was created.

  • wlsUserName is an object of type java.lang.String that specifies:

    - The local weblogic username.

SignatureString [] { "java.lang.String", "java.lang.String" }
ReturnsString
Exceptions
  • weblogic.management.utils.NotFoundException

haveCurrent

Returns true if there are more objects in the list, and false otherwise.

   
Operation Name"haveCurrent"
ParametersObject [] {  cursor }

where:

  • cursor is an object of type java.lang.String that specifies:

    - The cursor returned from a previous list method.

SignatureString [] { "java.lang.String" }
Returns boolean
Exceptions
  • weblogic.management.utils.InvalidCursorException

isSet

Returns true if the specified attribute has been set explicitly in this MBean instance.

   
Operation Name"isSet"
ParametersObject [] {  propertyName }

where:

  • propertyName is an object of type java.lang.String that specifies:

    property to check

SignatureString [] { "java.lang.String" }
Returns boolean
Exceptions
  • java.lang.IllegalArgumentException

listCredentials

Gets a list of credentials mapped to the resource. Returns a cursor as a string. Use the getCurrentCredentialRemoteUserName and getCurrentCredentialRemotePassword methods to get the username and password for the current item in the list.

   
Operation Name"listCredentials"
ParametersObject [] {  resourceId }

where:

  • resourceId is an object of type java.lang.String that specifies:

    - The resource for which the credentials are to be returned.

SignatureString [] { "java.lang.String" }
ReturnsString

listMappings

Gets a list of credential mappings created for the given resource id. Returns a cursor as a string. Use the getCurrentMappingWLSUserName and getCurrentMappingRemoteUserName methods to return the webLogic username and remote user name for the current item in the list.

   
Operation Name"listMappings"
ParametersObject [] {  resourceId }

where:

  • resourceId is an object of type java.lang.String that specifies:

    - The resource for which the credential mappings are to be returned.

SignatureString [] { "java.lang.String" }
ReturnsString

listMappingsByPattern

Gets a list of all credential mappings with the resource id matching the specified resource id pattern. Returns a cursor as a string. Use the getCurrentMappingWLSUserName and getCurrentMappingRemoteUserName() and getCurrentMappingResourceID() methods to return the WebLogic username and external user name and the current resource ID for the current item in the list.

   
Operation Name"listMappingsByPattern"
ParametersObject [] {  resourceIdPatternmaxToReturn }

where:

  • resourceIdPattern is an object of type java.lang.String that specifies:

    - Resource Id string pattern, that can contain '*' - wild card, and '' - escape character.

  • maxToReturn is an object of type java.lang.Integer that specifies:

    - Maximum number of returned mappings

SignatureString [] { "java.lang.String", "java.lang.Integer" }
ReturnsString

unSet

Restore the given property to its default value.

   
Operation Name"unSet"
ParametersObject [] {  propertyName }

where:

  • propertyName is an object of type java.lang.String that specifies:

    property to restore

SignatureString [] { "java.lang.String" }
Returns void
Exceptions
  • java.lang.IllegalArgumentException
    UnsupportedOperationException if called on a runtime implementation.

wls_getDisplayName

   
Operation Name"wls_getDisplayName"
Parametersnull
Signaturenull
ReturnsString