This chapter describes how to create and configure a Oracle Data Integrator (ODI) domain for the standalone agent.
The following topics are covered in this chapter:
Section 6.2, "Configuring the Standalone Domain for the Standalone Agent"
Section 6.3, "Creating a Standalone Agent in the Master Repository Using ODI Studio"
Section 6.4, "Starting a Standalone Agent Using Node manager"
Section 6.5, "Starting a Standalone Agent Without Node Manager"
Before you can configure the topology for your standalone agent, make sure you have created the necessary schema in your database. See Chapter 3 for instructions.
This section provides instructions for creating a standalone domain for your standalone agent using the configuration wizard. For more information on other methods available for domain creation, see "Additional Tools for Creating, Extending, and Managing WebLogic Domains" in Creating WebLogic Domains Using the Configuration Wizard.
This section includes the following topics:
To begin domain configuration, navigate to the ORACLE_HOME
/oracle_common/common/bin
directory and start the WebLogic Server Configuration Wizard.
On UNIX operating systems:
./config.sh
On Microsoft Windows operating systems:
config.cmd
Follow the instructions in this section to create and configure the domain for the topology.
Task 1, "Selecting the Domain Type and Domain Home Location"
Task 10, "Reviewing Your Configuration Specifications and Configuring the Domain"
On the Configuration Type screen, select Create a New Domain.
In the Domain Location field, specify your Domain home directory.
It is recommended that you locate your Domain home in accordance with the directory structure summarized in "Understanding the Recommended Directory Structure" in Oracle Fusion Middleware Planning an Installation of Oracle Fusion Middleware, where the Domain home is located outside the Oracle home directory. This directory structure will help you avoid issues when you need to upgrade or reinstall your software.
Tip:
More information about the Domain home directory can be found in "Choosing a Domain Home" in Oracle Fusion Middleware Planning an Installation of Oracle Fusion Middleware.
More information about the other options on this screen can be found in Configuration Type in Creating WebLogic Domains Using the Configuration Wizard.
On the Templates screen, select the following template:
Oracle Data Integrator - Standalone Agent - 12.1.3.0 [odi]
On the JDK Selection screen, select the JDK on your system that is certified for use with Oracle Fusion Middleware.
Select RCU Data to activate the fields on this screen. The RCU Data option instructs the Configuration Wizard to connect to the database and Service Table (STB) schema to automatically retrieve schema information for the schemas needed to configure the domain.
Note:
If you choose to select Manual Configuration on this screen, you will have to manually fill in the parameters for your schema on the JDBC Component Schema screen.
After selecting RCU Data, fill in the following fields:
Field | Description |
---|---|
DBMS/Service |
Enter the database DBMS name, or service name if you selected a service type driver. |
Host Name |
Enter the name of the server hosting the database. |
Port |
Enter the port number on which the database listens. |
Schema Owner Schema Password |
Enter the user name and password for connecting to the database's Service Table schema. This is the schema user name and password that was specified for the Service Table component on the "Schema Passwords" screen in RCU (see Section 6.1). The default user name is |
Click RCU Data when you are finished specifying the database connection information. The following output in the Connection Result Log indicates that the operation succeeded:
Connecting to the database server...OK Retrieving schema data from database server...OK Binding local schema components with retrieved data...OK Successfully Done.
Tip:
More information about the RCU Data option can be found in "Understanding the Service Table Schema" in Oracle Fusion Middleware Creating Schemas with the Repository Creation Utility.
More information about the other options on this screen can be found in Datasource Defaults in Creating WebLogic Domains Using the Configuration Wizard
Verify that the values on the JDBC Component Schema screen are correct for all schemas. If you selected RCU Data on the previous screen, the schema table should already be populated appropriately.
Tip:
For high availability environments, see the following sections in Oracle Fusion Middleware High Availability Guide for additional information on configuring data sources for Oracle RAC databases:
More information about the other options on this screen can be found in JDBC Component Schema in Creating WebLogic Domains Using the Configuration Wizard.
Use the JDBC Component Schema Test screen to test the datasource connections you have just configured.
A green check mark in the Status column indicates a successful test. If you encounter any issues, see the error message in the Connection Result Log section of the screen, fix the problem, then try to test the connection again.
Tip:
More information about the other options on this screen can be found in Test Component Schema in Creating WebLogic Domains Using the Configuration Wizard
Use the System Component screen to create a new ODI system component. Click Add and do the following:
Under System Component, you can either use the default ODI component (OracleDIAgent1
) name, or specify a name of your choice.
Under Component Type, ensure that ODI is selected from the drop-down list.
Tip:
More information about the options on this screen can be found in System Components in Creating WebLogic Domains Using the Configuration Wizard.
Use the ODI Server Configuration screen to configure access to your ODI server:
Field | Description |
---|---|
System Component |
Select the ODI system component ( |
Server Listen Address |
Specify the IP address of the server where the ODI server should listen. Do not use "localhost." |
Server Listen Port |
Enter the port number on which ODI server listens. |
Supervisor Username |
Specify |
Supervisor Password |
Specify the Supervisor user password, as specified in Task 6 in Chapter 3 during schema creation. |
Preferred Datasource |
Use the default |
Tip:
More information about the options on this screen can be found in ODI Server Configuration in Creating WebLogic Domains Using the Configuration Wizard.
The Node Manager screen can be used to select the type of Node Manager you want to configure, along with the Node Manager credentials.
Select Per Domain as the Node Manager type, then specify the Node Manager credentials. You will be asked for these credentials when starting your system component with the startComponent
command.
Tip:
More information about the options on this screen can be found in Node Manager in Creating WebLogic Domains Using the Configuration Wizard.
More information about the types of Node Manager can be found in "Node Manager Overview" in Administering Node Manager for Oracle WebLogic Server.
The Configuration Summary screen contains the detailed configuration information for the domain you are about to create. Review the details of each item on the screen and verify that the information is correct.
You can go back to any previous screen if you need to make any changes, either by using the Back button or by selecting the screen in the navigation pane.
Domain creation will not begin until you click Create.
Tip:
More information about the options on this screen can be found in Configuration Summary in Creating WebLogic Domains Using the Configuration Wizard.
Click Finish to dismiss the configuration wizard.
A physical agent corresponds to a single standalone agent or a Java EE agent. A physical agent should have a unique name in the topology.
As part of its startup sequence, an agent connects to the Master Repository to see if there is a physical agent defined with its name. If it finds its entry, the agent continues with startup and, once started, it reads all the scheduled jobs of itself from the repository and starts processing.
If there is no physical agent entry for an agent, then the agent startup fails.
To create an agent using ODI Studio, see Section 4.5, "Creating an Agent in the Master Repository Using ODI Studio."
The following sections describe the procedures for starting the Standalone agent.
Note:
If you have not yet configured the physical agent in the master repository, go to Section 4.5, "Creating an Agent in the Master Repository Using ODI Studio."
This section contains the following topics:
To start your per-domain Node Manager, go to the DOMAIN_HOME
/bin
directory.
On UNIX operating systems, start the Node Manager as shown below, using nohup
and nm.out
as an example output file:
nohup ./startNodeManager.sh > nm.out&
On Windows operating systems, run:
startNodeManager.cmd
Note:
On Windows operating systems, Oracle recommends configuring Node Manager to run as a startup service. This allows Node Manager to start up automatically each time the system is restarted.
For more information, see "Running Node Manager as a Startup Service" in Administering Node Manager for Oracle WebLogic Server.
For more information about additional Node Manager configuration options, see Administering Node Manager for Oracle WebLogic Server.
To start your standalone agent, go to the DOMAIN_HOME
/bin
directory and run the following commands:
On UNIX operating systems:
./startComponent.sh OracleDIAgent1
On Windows operating systems:
startComponent.cmd OracleDIAgent1
You will be prompted for the Administrator password for the domain.
To verify that your agent was started, go to the following URL in your browser:
http://examplehost.exampledomain.com:port/oraclediagent
To start your standalone agent without Node Manager, go to the DOMAIN_HOME/bin
directory and run the following commands:
On UNIX operating systems:
./agent.sh -NAME=OracleDIAgent1
On Windows operating systems:
agent.cmd -NAME=OracleDIAgent1
The -NAME
parameter must be entered in all CAPS, and the name of the agent (in this case, OracleDIAgent1
) is also case-sensitive.
Section 8.1 contains basic administration tasks. You should familiarize yourself with the tasks described in this section and perform them as needed to verify that your domain is properly configured.
Section 8.2 contains additional domain configuration tasks that take advantage of additional Oracle Fusion Middleware products and features.
Section 8.3 contains common tasks to help prepare your Oracle Data Integrator environment for development.
Section 8.4 contains important tasks to help prepare your environment to move to a highly available environment.