29 DBMS_AQMIGTOOL

The DBMS_AQMIGTOOL package simplifies migration from Oracle Database Advanced Queuing (AQ) to Transactional Event Queue (TxEventQ) with orchestration automation, source and target compatibility diagnostics and remediation, and a unified user experience. Migration scenarios can be short or long-lived and be performed with or without AQ downtime, eliminating operational disruption.

See Also:

Migrating from AQ to TxEventQ in Oracle Database Advanced Queuing User's Guide for detailed information about DBMS_AQMIGTOOL

This chapter contains the following topics:

• Security Model

• DBMS_AQMIGTOOL Constants

• Summary of DBMS_AQMIGTOOL Subprograms

DBMS_AQMIGTOOL Security Model

All DBMS_AQMIGTOOL subprograms require the user to have EXECUTE privilege over the DBMS_AQMIGTOOL package. If the invoker of the package is the owner of the queue, then only EXECUTE privilege on the DBMS_AQMIGTOOL package is sufficient, But if the invoker is non-owner, then it also needs to have MANAGE_ANY queue system privilege, which can be granted through DBMS_AQADM.GRANT_SYSTEM_PRIVILEGE.

DBMS_AQMIGTOOL Constants

The DBMS_AQMIGTOOL package defines several constants that can be used for specifying parameter values.

When using enumerated constants, such as AUTOMATIC, INTERACTIVE, or ENABLE_EVALUATION, the symbol must be specified with the scope of the packages defining it. All types associated with the administrative interfaces must be prepended with DBMS_AQMIGTOOL. For example, DBMS_AQMIGTOOL.AUTOMATIC.

Table 29-1 DBMS_AQMIGTOOL Constants

Paramater	Options	Value
mig_mode	AUTOMATIC INTERACTIVE OFFLINE ONLY_DEFINITION	1 2 3 4
ordering	GLOBAL SESSION	1 2
checkmode	CURRENT ENABLE_EVALUATION	1 2
cancelmode	RESTORE NORESTORE Q_EMPTY	1 2 3
purge_option	ONLY_CQ ONLY_TXEVENTQ BOTH_Q	1 2 3

Summary of DBMS_AQMIGTOOL Subprograms

This section lists and briefly describes the DBMS_AQMIGTOOL subprograms.

Table 29-2 DBMS_AQMIGTOOL Package Subprograms

Subprogram	Description
CANCEL_MIGRATION Procedure	Cancels an ongoing migration by dropping the interim TxEventQ
CHECK_MIGRATED_MESSAGES Procedure	Provides a count of messages in the READY state within the AQ and the interim TxEventQ
CHECK_MIGRATION_TO_TXEVENTQ Procedure	Analyzes the AQ's definition and data and report any features unsupported in TxEventQ
CHECK_STATUS Procedure	Returns the current status of the ongoing migration process
CLEAR_UNSUPPORTED_FEATURE_TABLE Procedure	Clears entries from the USER_TXEVENTQ_MIGRATION_STATUS view
COMMIT_MIGRATION Procedure	Completes the migration process by dropping AQ, renaming the interim TxEventQ to match AQ's name, and enabling TxEventQ for all operations
DISABLE_MIGRATION_CHECK Procedure	Disables the internal AQ monitoring for detecting unsupported features and stops event insertion in the USER_TXEVENTQ_MIGRATION_STATUS view
INIT_MIGRATION Procedure	Analyzes the AQ's definition and data for unsupported features and then starts the migration process by creating an interim TxEventQ copying the AQ's configuration
PURGE_QUEUE_MESSAGES Procedure	Purges messages from the queue
RECOVER_MIGRATION Procedure	Helps recovery from any failures during execution of migration procedures such as DBMS_AQMIGTOOL.INIT_MIGRATION, DBMS_AQMIGTOOL.COMMIT_MIGRATION, or DBMS_AQMIGTOOL.CANCEL_MIGRATION
RENAME_QUEUE Procedure	Renames the TxEventQ along with its default exception queue if present

CANCEL_MIGRATION Procedure

This procedure serves the purpose of canceling an ongoing migration. It involves dropping the interim TxEventQ, which was created during the execution of DBMS_AQMIGTOOL.INIT_MIGRATION.

Syntax

PROCEDURE DBMS_AQMIGTOOL.CANCEL_MIGRATION (
	cqschema    IN VARCHAR2,
	cqname      IN VARCHAR2,
	cancelmode  IN NUMBER DEFAULT DBMS_AQMIGTOOL.RESTORE );

Parameters

Table 29-3 CANCEL_MIGRATION Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the queue name for which the migration needs to be canceled
cancelmode	Specifies the mode in which the user wants to cancel the migration. The following are the possible values: DBMS_AQMIGTOOL.RESTORE (default): This option restores the messages from the interim TxEventQ into the AQ, including their message state. New MSGID will get populated for restored messages. Note: The priority behavior of restored messages may change as AQ and TxEventQ default values are different. DBMS_AQMIGTOOL.NORESTORE: Messages within interim TxEventQ will be discarded. DBMS_AQMIGTOOL.EMPTY: If the interim TxEventQ is not empty, selecting this option will trigger an exception, prompting the user to dequeue all messages from the interim TxEventQ. This mode is useful if the user wishes to prevent message migration while transitioning to the AQ.

Usage Notes

A prerequisite for this procedure is that the migration must already be started on the queue, that is, DBMS_AQMIGTOOL.INIT_MIGRATION should be invoked before executing this procedure. For DBMS_AQMIGTOOL.RESTORE mode, the TxEventQ's exception queue messages are not restored to AQ or its exception queue.

CHECK_MIGRATED_MESSAGES Procedure

This procedure calculates the count of messages in the READY state within both the AQ and the interim TxEventQ. This count provides valuable insight before using DBMS_AQMIGTOOL.COMMIT_MIGRATION or DBMS_AQMIGTOOL.CANCEL_MIGRATION. The calculated count is independent of the number of subscribers.

Syntax

PROCEDURE SYS.DBMS_AQMIGTOOL.CHECK_MIGRATED_MESSAGES (
	cqschema                           IN VARCHAR2,
	cqname                             IN VARCHAR2, 
	txeventq_migrated_message          IN OUT NUMBER, 
	cq_pending_messages                IN OUT NUMBER);

Parameters

Table 29-4 CHECK_MIGRATED_MESSAGES Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue on which the migration process has started
txeventq_migrated_message	Represents the count of messages in the READY state within the interim TxEventQ. The count helps estimate the potential fallback time if the user opts to execute DBMS_AQMIGTOOL.CANCEL_MIGRATION.
cq_pending_messages	Represents the count of messages in the READY state within the AQ. The count helps determine the remaining number of READY state messages until the AQ is empty, which is a prerequisite for using the DBMS_AQMIGTOOL.COMMIT_MIGRATION procedure.

Usage Notes

A prerequisite for this procedure is that the migration must already be started on the queue, meaning DBMS_AQMIGTOOL.INIT_MIGRATION should be invoked before executing this procedure.

CHECK_MIGRATION_TO_TXEVENTQ Procedure

This procedure examines the AQ's definition and data and reports any features that are unsupported in TxEventQ. If no unsupported features are detected, then migration_report will be empty.

Syntax

PROCEDURE DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ (
	cqschema           IN VARCHAR2,
	cqname             IN VARCHAR2,
	migration_report   IN OUT TXEVENTQ_MIGREPORT_ARRAY, 
	checkmode          IN NUMBER DEFAULT DBMS_AQMIGTOOL.ENABLE_EVALUATION);

Parameters

Table 29-5 CHECK_MIGRATION_TO_TXEVENTQ Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the queue name for which unsupported features need to be checked
migration_report	A Varray containing details of unsupported events and their corresponding descriptions. It holds the most recent 20 unsupported features.
checkmode	Specifies the mode in which the user wants to check. The following are the possible values: DBMS_AQMIGTOOL.CURRENT: This mode generates a report using the current definition of the AQ and its data. DBMS_AQMIGTOOL.ENABLE_EVALUATION (Default): This mode, along with the CURRENT option report, will enable the monitoring of the AQ. It helps the capturing runtime-specific unsupported features. As more workload is applied to the AQ, the unsupported features, if found any, are recorded in an internal table accessible through the USER_TXEVENTQ_MIGRATION_STATUS view. Users can disable monitoring using DBMS_AQMIGTOOL.DISABLE_MIGRATION_CHECK.

Usage Notes

Several features like relative message identifier, sequence deviation, and transformation are not supported in TxEventQ. If the queue uses any of them, they will be recorded in the migration_report.

It is recommended to use the DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ procedure to detect unsupported features before beginning the migration process.

See Also:

Limitations and Workarounds in Oracle Database Transactional Event Queues and Advanced Queuing User's Guide

CHECK_STATUS Procedure

This procedure returns the status of the migration process. In case any unsupported features are detected, the procedure will return details about the most recent unsupported feature, including its description. On the other hand, if no unsupported features are detected, it will return a status of 'No Compatibility Error'.

Syntax

PROCEDURE DBMS_AQMIGTOOL.CHECK_STATUS (
	cqschema                    IN VARCHAR2,
	cqname                      IN VARCHAR2, 
	status                      IN OUT VARCHAR2, 
	migration_comment           IN OUT VARCHAR2);

Parameters

Table 29-6 CHECK_STATUS Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue for which the migration process status needs to be checked
status	Return the compatibility status. In case of incompatibility, that is, detection of unsupported features; the most recent unsupported event will be returned, and the status return format will be: "Compatibility Error: <feature_name> Unsupported Feature".
migration_comment	If the status is incompatible, the description of the unsupported event will be provided

Usage Notes

A prerequisite for this procedure is that the migration must already be started on the queue, meaning DBMS_AQMIGTOOL.INIT_MIGRATION should be invoked before executing this procedure.

The following table will store the information regarding events during pre-init or post-init migration. Users can access this information through security views: DBA_TXEVENTQ_MIGRATION_STATUS, USER_TXEVENTQ_MIGRATION_STATUS, and ALL_TXEVENTQ_MIGRATION_STATUS.

sys.aq$_migration_status(
        migration_id           RAW(16);
        source_schema          VARCHAR2(128) NOT NULL,
        source_queue           VARCHAR2(128) NOT NULL,
        source_queue_table     VARCHAR2(128),
        target_schema          VARCHAR2(128) NOT NULL,
        target_queue           VARCHAR2(128) NOT NULL,  	
        status                 NUMBER,
        event                  VARCHAR(128),
        event_timestamp        TIMESTAMP WITH TIME ZONE,
        event_id               NUMBER,
        event_error            VARCHAR2(1024),
        ordering               VARCHAR(30),
        suffix                 VARCHAR2(2),
        mig_mode               NUMBER,
        spare1                 NUMBER,
        spare2                 VARCHAR2(30),
        spare3                 TIMESTAMP WITH TIME ZONE         
)

A unique migration_id will be assigned to each initiated migration.

See Also:

DBA_TXEVENTQ_MIGRATION_STATUS in Oracle Database Reference

USER_TXEVENTQ_MIGRATION_STATUS in Oracle Database Reference

ALL_TXEVENTQ_MIGRATION_STATUS in Oracle Database Reference

CLEAR_UNSUPPORTED_FEATURE_TABLE Procedure

This procedure removes entries from the underlying table of the USER_TXEVENTQ_MIGRATION_STATUS view. This view stores records related to unsupported features detected by the DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ procedure and details of other migration procedure calls (INIT_MIGRATION/COMMIT_MIGRATION/CANCEL_MIGRATION) used for internal purposes.

Syntax

PROCEDURE DBMS_AQMIGTOOL.CLEAR_UNSUPPORTED_FEATURE_TABLE (
	cqschema             IN   VARCHAR2,
	cqname               IN   VARCHAR2 DEFAULT NULL,
	eraseall            IN   BOOLEAN DEFAULT FALSE);

Parameters

Table 29-7 CLEAR_UNSUPPORTED_FEATURE_TABLE Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue for which records need to be cleared
eraseall	TRUE erases all the records for the specified queue. Note: The TRUE value is intended solely for internal purposes and should not be used without consulting Oracle support. FALSE erases records related to unsupported features only.

Usage Notes

Users can use this procedure to erase the records generated by the DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ procedure. Dropping the queue or the user will also erase records for that queue. However, executing DBMS_AQMIGTOOL.COMMIT_MIGRATION or DBMS_AQMIGTOOL.CANCEL_MIGRATION will not clear the records for the queue. Therefore, this procedure offers the flexibility to erase records for a queue at any point.

COMMIT_MIGRATION Procedure

This procedure completes the migration process. It drops AQ and renames the interim TxEventQ to the AQ's name, and enables the TxEventQ for all operations. It is important to note that an empty AQ (that is, with no messages in the READY state) is required to execute the procedure successfully; otherwise, an exception will be raised.

Syntax

PROCEDURE DBMS_AQMIGTOOL.COMMIT_MIGRATION (
	cqschema         IN VARCHAR,
	cqname           IN VARCHAR,
	ignore_warning   IN BOOLEAN DEFAULT FALSE));

Parameters

Table 29-8 COMMIT_MIGRATION Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the queue name for which the migration needs to be completed
ignore_warning	After DBMS_AQMIGTOOL.INIT_MIGRATION, all unsupported events are recorded as warnings. TRUE means the procedure will ignore the warnings and complete the migration. FALSE means the procedure will throw an error if there are any warnings.

Usage Notes

A prerequisite for this procedure is that the migration must already be started on the queue. In other words, the DBMS_AQMIGTOOL.INIT_MIGRATION procedure should be invoked before executing this procedure. The messages from the AQ's exception queue will not be copied to the TxEventQ's exception queue.

DISABLE_MIGRATION_CHECK Procedure

This procedure disables the internal monitoring of the AQ aimed at detecting unsupported features. It also stops the recording of events for the USER_TXEVENTQ_MIGRATION_STATUS view.

Syntax

PROCEDURE DBMS_AQMIGTOOL.DISABLE_MIGRATION_CHECK (
	cqschema       IN VARCHAR2)
	cqname         IN VARCHAR2);

Parameters

Table 29-9 DISABLE_MIGRATION_CHECK Procedure Parameter

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue on which migration monitoring needs to be disabled

Usage Notes

As a pre-migration step, the user can start recording unsupported features by invoking DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ with DBMS_AQMIGTOOL.ENABLE_EVALUATION option. This can be followed by running a comprehensive workload on the AQ to detect potential issues and then stop recording unsupported features by calling DBMS_AQMIGTOOL.DISABLE_MIGRATION_CHECK. The user can modify the workload if any migration issues are found before repeating the process. If no migration issues were found, migration of the AQ can be attempted.

INIT_MIGRATION Procedure

This procedure examines the definition and data of the AQ to detect any features that are not supported in TxEventQ. If any unsupported features are detected, an exception is raised. Otherwise, the procedure starts the migration process by creating an interim TxEventQ that copies the configuration of the AQ, which includes payload type, rules, subscribers, privileges, PL/SQL notifications, and more.

Syntax

PROCEDURE DBMS_AQMIGTOOL.INIT_MIGRATION (
	cqschema            IN VARCHAR2,
	cqname              IN VARCHAR2 DEFAULT NULL,
	txeventqschema      IN VARCHAR2 DEFAULT NULL,
	txeventqname        IN VARCHAR2 DEFAULT NULL,
	mig_mode            IN NUMBER DEFAULT DBMS_AQMIGTOOL.INTERACTIVE,
	ordering            IN NUMBER DEFAULT DBMS_AQMIGTOOL.GLOBAL,
	suffix              IN VARCHAR2 DEFAULT ‘M’);

Parameters

Table 29-10 INIT_MIGRATION Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue (AQ) exists
cqname	Specifies the name of the queue (AQ) for which the migration process is to be started. If cqname is NULL, then migration initiates for all AQs in cqschema, ignoring queues with unsupported features. Execution displays the count of queues where DBMS_AQMIGTOOL.INIT_MIGRATION succeeded.
txeventqschema	Specifies the schema name where the target TxEventQ is intended to be created. Only provide this value for DBMS_AQMIGTOOL.ONLY_DEFINITION mode. If the invoker is on a different schema than txeventqschema, it needs MANAGE_ANY queue system privilege to execute this procedure successfully.
txeventqname	Specifies the name of the queue for the target TxEventQ to be created. Only provide this value for DBMS_AQMIGTOOL.ONLY_DEFINITION mode.
mig_mode	Specifies the migration mode. The following are the possible values: DBMS_AQMIGTOOL.AUTOMATIC: Enqueue and dequeue operations are allowed in this mode, but a background job will attempt to execute DBMS_AQMIGTOOL.COMMIT_MIGRATION once no messages are left in the READY state in AQ and no unsupported features are detected. DBMS_AQMIGTOOL.INTERACTIVE (Default): In this mode, both enqueue and dequeue operations are allowed. DBMS_AQMIGTOOL.OFFLINE: Only dequeue operations are allowed in this mode, which helps in reducing the workload by restricting the new enqueue operations. DBMS_AQMIGTOOL.ONLY_DEFINITION: This mode creates a separate TxEventQ with the same configuration as the AQ instead of an interim TxEventQ setup. This completes the migration process, with AQ and TxEventQ remaining in the system. The messages present in AQ will not be copied to the newly created TxEventQ. Note: For the DBMS_AQMIGTOOL.ONLY_DEFINITION mode, there is no need to call DBMS_AQMIGTOOL.COMMIT_MIGRATION or DBMS_AQMIGTOOL.CANCEL_MIGRATION to complete or cancel the migration; this DBMS_AQMIGTOOL.INIT_MIGRATION call is sufficient. However, for other modes, the user must explicitly call other procedures in the DBMS_AQMIGTOOL package to proceed further.
ordering	Specifies the message level ordering the user wants to follow. The following are the possible values: DBMS_AQMIGTOOL.GLOBAL (Default): This option implements global-level message ordering by setting the number of event streams in the TxEventQ to one. DBMS_AQMIGTOOL.SESSION: This option imposes a message order only for a session. The number of event streams in the TxEventQ will be set based on the initialization parameter _aq_init_shards. Oracle recommends using this option to achieve the full performance benefits of TxEventQ.
suffix	Specifies a single character suffix for naming the interim TxEventQ. The interim TxEventQ name will be in the format <cqname>_<suffix>. The default value for the suffix is M.

Usage Notes

• This procedure will also create the default exception queue on the TxEventQ, following the naming format AQ$_<TxEventQ_name>_E.

• The following points are not relevant for DBMS_AQMIGTOOL.ONLY_DEFINITION mode but apply to other modes:

  • It restricts AQ from administrative operations to maintain interim TxEventQ configuration integrity until the migration is completed or canceled.

  • The Enqueue - Dequeue operations are allowed on AQ:

    • Enqueue requests for new messages are directed to the interim TxEventQ.

    • Messages are first dequeued from AQ. If no messages are in the READY state, then messages are dequeued from the interim TxEventQ.

  • Users are restricted from performing all direct operations on the interim TxEventQ. Enqueue and dequeue operations on interim TxEventQ will always be performed through AQ.

• If the procedure triggers an exception due to the detection of unsupported features, it is recommended to use the DBMS_AQMIGTOOL.CHECK_MIGRATION_TO_TXEVENTQ procedure to obtain a detailed list of the detected unsupported features.

• If there is a name conflict, such as when a queue (AQ) being migrated shares the same name as the queue table in which it resides, then only the DBMS_AQMIGTOOL.ONLY_DEFINITION mode is supported. For any other modes, attempting to proceed will result in an exception being raised.

PURGE_QUEUE_MESSAGES Procedure

This procedure purges messages from the queue. It can perform message purging from the AQ, the interim TxEventQ, or both, depending on user input. Specifically, one of the prerequisites for executing DBMS_AQMIGTOOL.COMMIT_MIGRATION is to ensure an empty AQ, meaning no messages in the READY state. This procedure allows users to efficiently purge all messages from the AQ to fulfill this requirement.

Syntax

PROCEDURE DBMS_AQMIGTOOL.PURGE_QUEUE_MESSAGES (
	cqschema       IN VARCHAR2,  
	cqname         IN VARCHAR2, 
	purge_option   IN NUMBER DEFAULT DBMS_AQMIGTOOL.ONLY_CQ);

Parameters

Table 29-11 PURGE_QUEUE_MESSAGES Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue where the migration process started
purge_option	Specifies the option from which queue messages need to be purged. The following options are available: DBMS_AQMIGTOOL.ONLY_CQ (Default): Purge messages only from the AQ. DBMS_AQMIGTOOL.ONLY_TXEVENTQ: Purge messages only from the interim TxEventQ. DBMS_AQMIGTOOL.BOTH: Purge messages from both the AQ and the interim TxEventQ.

Usage Notes

Suppose the count of messages in the READY state within the AQ is obtained from the DBMS_AQMIGTOOL.CHECK_MIGRATED_MESSAGE procedure is large, and the user wishes to speed up the DBMS_AQMIGTOOL.COMMIT_MIGRATION process without waiting for dequeues to consume the messages, the DBMS_AQMIGTOOL.PURGE_QUEUE_MESSAGES procedure can be used.

A prerequisite for this procedure is that the migration must already be started on the queue, meaning DBMS_AQMIGTOOL.INIT_MIGRATION should be invoked before executing this procedure.

RECOVER_MIGRATION Procedure

This procedure restores the migration state to the nearest feasible and consistent point, either before or after the execution of DBMS_AQMIGTOOL.CANCEL_MIGRATION, DBMS_AQMIGTOOL.COMMIT_MIGRATION, or DBMS_AQMIGTOOL.INIT_MIGRATION. The recovered state is then displayed to the user through the output parameter recovery_message, providing guidance for further action. If migration procedures experience unexpected failures, such as instance crashes, then this procedure can be used to recover the migration to the nearest consistent state like before INIT_MIGRATION, after INIT_MIGRATION, after COMMIT_MIRGATION, and after CANCEL_MIGRATION.

Syntax

PROCEDURE DBMS_AQMIGTOOL.RECOVER_MIGRATION (
	cqschema              IN VARCHAR2,
	cqname                IN VARCHAR2,
	recovery_message      OUT VARCHAR2);

Parameters

Table 29-12 RECOVER_MIGRATION Procedure Parameters

Parameter	Description
cqschema	Specifies the schema name where the queue exists
cqname	Specifies the name of the queue where the migration procedure was attempted
recovery_message	Returns a descriptive message indicating the restored migration state's nearest feasible and consistent point

Usage Notes

The following table shows all the possible recovery_message:

Table 29-13 Recommended action table according to recovery_message

Error while executing migration procedure:	recovery_message	Recommended Action
DBMS_AQMIGTOOL.INIT_MIGRATION	State is restored to before INIT_MIGRATION call execution.	To start the migration, the user must explicitly call DBMS_AQMIGTOOL.INIT_MIGRATION again.
DBMS_AQMIGTOOL.INIT_MIGRATION	State is restored to after INIT_MIGRATION call execution.	No further action is needed to start the migration, as this procedure has successfully started.
DBMS_AQMIGTOOL.COMMIT_MIGRATION	State is restored to after COMMIT_MIGRATION call execution.	No further action is needed to complete the migration, as this procedure has successfully completed it.
DBMS_AQMIGTOOL.CANCEL_MIGRATION	State is restored to before CANCEL_MIGRATION call execution.	To proceed with canceling the migration, the user must explicitly call DBMS_AQMIGTOOL.CANCEL_MIGRATION again.
DBMS_AQMIGTOOL.CANCEL_MIGRATION	State is restored to after CANCEL_MIGRATION call execution.	No further action is needed to cancel the migration, as this procedure has successfully cancelled it.
No migration procedure	No need for recovery call.	Since no migration procedure execution is detected, restoring it to the nearest feasible and consistent point is not required.

RENAME_QUEUE Procedure

This procedure renames the TxEventQ along with its default exception queue if present.

Syntax

PROCEDURE DBMS_AQMIGTOOL.RENAME_QUEUE (
	schema             IN VARCHAR2,
	qname              IN VARCHAR2,
	new_qname          IN VARCHAR2);

Parameters

Table 29-14 RENAME_QUEUE Procedure Parameters

Parameter	Description
schema	Specifies the schema name where the queue exists
qname	Specifies the current name of the queue to be renamed
new_qname	Specify the new name to be given to the existing queue. The new name must be unique within a schema and must follow object name guidelines in Oracle Database SQL Language Reference with regard to reserved characters.

Usage Notes

This procedure requires a prerequisite step: the user must perform DBMS_AQADM.STOP_QUEUE to ensure there are no concurrent enqueue and dequeue transactions.

If the default exception queue is present, it will be renamed from <schema>.AQ$_<qname>_E to <schema>.AQ$_<new_qname>_E.