2 Building and Configuring OCI Applications

This chapter describes features about building and configuring OCI applications on Linux, UNIX, and Windows operating systems.

For other supported operating systems, see the platform specific installation guides for more information.

2.1 Header File and Makefile Locations

The OCI and OCCI header files that are required for OCI and OCCI client application development on Linux and UNIX operating systems reside in the $ORACLE_HOME/rdbms/public directory.

These files are available both with the Oracle Database Server installation, and with the Oracle Database Client Administration and Custom installations.

All demonstration programs and their related header files reside in the $ORACLE_HOME/rdbms/demo directory once they are installed. These demonstration files are installable only from the Examples media. See OCI Demonstration Programs for the names of these programs and their purposes.

Several makefiles are provided in the demo directory. Each makefile contains comments with instructions on its use in building OCI executables. Oracle recommends that you use these demonstration makefiles whenever possible to avoid errors in compilation and linking.

The demo_rdbms.mk file in the demo directory and is an example makefile. See the comments on how to build the demonstration OCI programs. The demo_rdbms.mk file includes the $ORACLE_HOME/rdbms/public directory. Ensure that your own customized makefiles have the $ORACLE_HOME/rdbms/public directory in the INCLUDE path.

The ociucb.mk file is a makefile in demo for building a callback shared library.

2.2 Building an OCI Application on Linux and UNIX

How to build an OCI application on Linux and UNIX.

This topic describes the features of OCI that apply to building applications on Linux and UNIX in the following topics:

See Also:

  • Oracle Database Client Installation Guide for Linux for operating system requirements for x86–64 Linux platforms, supported Oracle Linux and Red Hat Enterprise distributions for x86-64 platforms, and installation requirements for programming environments for Linux x86-64

  • Oracle Database Instant Client Installation Guide for Apple Mac OS X (Intel) for checking the software requirements

2.2.1 Oracle Directory Structure

The $ORACLE_HOME directory contains the following directories described in the following table that are relevant to OCI.

These directories are for the full client and Oracle Database, but not for the Oracle Instant Client. These files include the library files needed to link and run OCI applications, and link with other Oracle products.

Table 2-1 ORACLE_HOME Directories and Contents

Directory Name Contents

/admin

Configuration files

/demo

Sample programs, make files, SQL files, and so forth

/imclude

Header files

/lib

Library files

/mesg

Message files

/public

Public header files

2.2.2 Demonstration OCI Programs

A set of OCI demonstration programs and their corresponding project files are optionally installed after an Oracle Database installation and set up in the ORACLE_BASE/ORACLE_HOME/demo subdirectory.

Build and run these OCI demonstration programs to familiarize yourself with the steps involved in developing OCI applications.

For Oracle Database Enterprise Edition (Oracle Database EE) users:

To build a demo OCI program, run the make file (demo_rdbms.mk) located in the /demo directory. For example, to build a single OCI demo, use the following make command syntax:
make -f demo_rdbms.mk build EXE=demo OBJS="demo.o ..."
For example, to build the OCI cdemo81.c program, enter the following make command:
make -f demo_rdbms.mk build EXE=cdemo81 OBJS=cdemo81.o

In this example, the executable file is created or updated from the object file, which in turn is made by compiling the source file cdemo81.c.

Where:

The build option in the command, regenerates client shared libraries. That is, it results in re-linking the oracle shared library. The build command option should be specified  only if you apply a patch to the client.

For Oracle Database Free users:

You should not use the build option in the demo_rdbms.mk file as it does not support regenerating the client shared library. Oracle Database Free is bundled only with binaries required to run the applications, utilities, and the database. You can compile and link application and demo programs with the specified header files.

Note:

genclntsh and genclntst scripts cannot be used as the object (.o's) or archive (.a's) libraries required for patching and re-linking are not available in the installed location.

See Also:

  • Oracle Database Examples Installation Guide for information about installing the demonstration OCI programs using Oracle Universal Installer

  • Review the contents of the demo_rdbms.mk file to learn more about running the many other OCI demonstration programs that are available in the demo subdirectory.

  • OCI Demonstration Programs for more information about OCI demonstration programs

2.3 Building an Application on Windows

How to build an OCI application on Windows.

See Getting Started with OCI for Windows for complete information.

See Also:

Oracle Database Client Installation Guide for Microsoft Windows for information about Oracle Database software client requirements.

2.4 Database Connection Strings

This topic describes Oracle Net naming methods for connecting to Oracle Databases.

In particular, the connect_identifier in the OCIServerAttach() call can be specified in the following formats:

  • Starting with Oracle Database 19c release, the Easy Connect Plus syntax has been extended, see About Easy Connect Plus.

    An Easy Connect Plus string has the following syntax:

    [[protocol:]//]host1{,host12}[:port1]{,host2:port2}[/service_name][:server][/instance_name][?parameter_name=value{&parameter_name=value}]
  • You can set the value of net_service_name to OCIServerAttach() as follows:

    net_service_name= 
     (DESCRIPTION= 
    (ADDRESS=(protocol_address_information))
       (CONNECT_DATA= 
         (SERVICE_NAME=service_name)))
  • As an Oracle Net connect descriptor of the form:

    "(DESCRIPTION=(ADDRESS=(PROTOCOL=protocol-name) (HOST=host-name) (PORT=port-number))
    (CONNECT_DATA=(SERVICE_NAME=service-name)))"
    
  • A Connection Name that is resolved through Directory Naming where the site is configured for LDAP server discovery.

See Also:

Oracle Database Net Services Administrator's Guide and Oracle Database Net Services Reference for more information about naming methods such as tnsnames.ora and directory naming.

2.4.1 Examples of Oracle Database Connection String Connect Identifiers

If you are using OCI applications, for example SQL*Plus, then you can specify the database connection string in the following ways:

If the listener.ora file on the Oracle database contains the following:

LISTENER = (ADDRESS_LIST=
 (ADDRESS=(PROTOCOL=tcp)(HOST=server6)(PORT=1573))
)
 
SID_LIST_LISTENER = (SID_LIST= 
 (SID_DESC=(SID_NAME=rdbms3)(GLOBAL_DBNAME=rdbms3.server6.us.alchemy.com)
(ORACLE_HOME=/home/dba/rdbms3/oracle))
)

For example, the OCI application connect identifier has of the following format:

"server6:1573/rdbms3.server6.us.alchemy.com"

The connect identifier can also be specified as:

"(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server6)(PORT=1573))(CONNECT_DATA=
(SERVICE_NAME=rdbms3.server6.us.alchemy.com)))"

Alternatively, you can set the LOCAL environment variable to any of the previous connect identifiers and connect without specifying the connect identifier. For example:

export LOCAL=//server6:1573/rdbms3.server6.us.alchemy.com

You can also specify the LOCAL environment variable as follows:

export LOCAL=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server6)(PORT=1573))
(CONNECT_DATA=(SERVICE_NAME=rdbms3.server6.us.alchemy.com)))

Then you can invoke the OCI application with an empty connect identifier. For example, to run SQL*Plus:

sqlplus user

The connect descriptor can also be stored in the tnsnames.ora file. For example, the tnsnames.ora file contains the following connect descriptor:

conn_str = (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server6)(PORT=1573))(CONNECT_DATA=
(SERVICE_NAME=rdbms3.server6.us.alchemy.com)))

If the tnsnames.ora file is located in the /home/webuser/myconfigs directory, then you can set the variable TNS_ADMIN (or LOCAL on Windows) as:

export TNS_ADMIN=/home/webuser/myconfigs

Then you can use the connect identifier conn_str for invoking OCI application, for example SQL*Plus, or for your OCI connection.

Note:

TNS_ADMIN specifies the directory where configuration file such as tnsnames.ora file is located and is not the full path of the tnsnames.ora file.

If the preceding tnsnames.ora file is located in an installation based Oracle home in the /network/server6/home/dba/oracle/network/admin directory, then the ORACLE_HOME environment variable can be set as follows and OCI applications, for example SQL*Plus can be invoked as previously, with the identifier conn_str:

export ORACLE_HOME=/network/server6/home/dba/oracle

Finally, if tnsnames.ora can be located by TNS_ADMIN or ORACLE_HOME, then the LOCAL environment variable can be set as follows enabling you to invoke OCI application, for example SQL*Plus without a connect identifier:

export LOCAL=conn_str

2.5 Client and Server Operating with Different Versions of Time Zone Files

In Oracle Database Release 11.2 (or later) you can use different versions of the time zone file on the client and server.

Both client and server must be 11.2 or later to operate in such a mixed mode. This section discusses the ramifications of operating in such a mode. To avoid these ramifications use the same time zone file version for client and server.

The following behavior is seen when the client and server use different time zones file versions. Note that the use of different time zone file versions only affects the handling of TIMESTAMP WITH TIMEZONE (TSTZ) data type values.

Applications that manipulate opaque type or XMLType instances or both containing TSTZ type attributes must use the same time zone file version on client and server to avoid data loss.

See Also:

Oracle Database Globalization Support Guide for information about upgrading the time zone file and timestamp with time zone data

2.6 OCI Support for Centralized Configuration Store

This section discusses Oracle Call Interface (OCI) support for Centralized Configuration Store also called Config Store or Centralized Configuration Provider.

Centralized Configuration Store can be Azure-based or Oracle Cloud Infrastructure based. Centralized Configuration Store manages all application configurations centrally. Instead of storing connect descriptors on a client in the tnsnames.ora file, you can store them in a Centralized Configuration Store. Oracle Call Interface related parameters can also be configured in Centralized Configuration Store.

2.6.1 User Credentials

For Centralized Configuration Store credentials to take effect, the username and password fields must not be set in the authentication handle (authp/usrhp). If they are set on the authentication handle, then the configuration store values are ignored.

2.6.1.1 OCISessionBegin()

For the OCISessionBegin function, the username and password should not be set on authp. Also, OCI_CRED_RDBMS is the cred value that is passed. The configuration store is detected internally and login succeeds.

OCIHandleAlloc((dvoid *) envhp, (dvoid **)&authp, 
                        (ub4) OCI_HTYPE_AUTHINFO,
                        (size_t) 0, (dvoid **) 0);
(OCISessionBegin(svchp, errhp, authp, (ub4) OCI_CRED_RDBMS,
                     (ub4) OCI_DEFAULT))

Note:

The connect string must point to the configuration store with appropriate credentials.

2.6.1.2 OCISessionGet()

For the OCISessionGet function, the username and password should not be set on authp. That is, username or password are not set on user auth handle (authp)

OCIHandleAlloc((dvoid *) envhp, (dvoid **)&authp, 
                        (ub4) OCI_HTYPE_AUTHINFO,
                        (size_t) 0, (dvoid **) 0);

 OCISessionGet(envhp, errhp, &svchp, authp,
               (OraText *)dbname, (ub4)strlen(dbname), NULL,
               0, NULL, NULL, NULL, OCI_DEFAULT|OCI_SESSGET_STMTCACHE));

Note:

The connect string must point to the Centralized Configuration Store with appropriate credentials.
2.6.1.3 OCISessionPoolCreate()

For the OCISessionPoolCreate function, we need to pass an empty username and password.

OraText *appusername ="";
OraText* apppassword = "";
ub4 appusernameLen = strlen(appusername);
ub4 apppasswordLen = strlen(apppassword);

OCISessionPoolCreate(envhp, errhp,poolhp, (OraText **)&poolName, (ub4 *)&poolNameLen, database, (ub4)strlen((const signed char *)database), 
sessMin, sessMax, sessIncr, (OraText *)appusername, (ub4)appusernameLen, (OraText *)apppassword, (ub4)apppasswordLen,  OCI_SPC_HOMOGENEOUS ));

Note:

The connect string must point to the Centralized Configuration Store with appropriate credentials.
2.6.1.4 Credentials Precedence

The API user credentials have higher precedence over configuration store credentials. Configuration store credentials are picked only when it has been configured and the API credentials are not provided. You can check if the configuration store has credentials set, using OCI_ATTR_SERVER_FLAGS flag attribute. After OCIServerAttach() function call, you can check OCI_ATTR_SERVER_FLAGS flag to check if credentials were detected in the configuration store. If these flags are not set, then the application can choose alternate ways to obtain the username or password, for example, prompts the user for the credentials.

2.6.1.4.1 OCI_ATTR_SERVER_FLAGS

Starting with Oracle Database Release 23ai, a new attribute, OCI_ATTR_SERVER_FLAGS is introduced in the server handle (OCIServer *srvhp). Within the attribute OCI_ATTR_SERVER_FLAGS, two flags OCI_SERVER_FLAG_CONFIG_USR, OCI_SERVER_FLAG_CONFIG_PASSWORD are included. These flags are used to indicate whether the OCIServerAttach() function returned a configuration username and password respectively. Applications can leverage this information to decide if they need to provide alternate login information to OCISessionBegin() function through the authentication handle or through external authentication mechanisms specified by setting credit to OCI_CRED_EXT.

OCIServerAttach ( srvhp, errhp, (text *)dbname,
                                    (sb4) strlen((char *)dbname), 0);
OCIAttrGet((dvoid *)srvhp, (ub4)OCI_HTYPE_SERVER,
                                     (dvoid *)&serverFlag, (ub4 *)0,
                                     (ub4)OCI_ATTR_SERVER_FLAGS,
                                     errhp);
boolean isUser = (serverFlag & OCI_SERVER_FLAG_CONFIG_USR)? TRUE: FALSE;
boolean isPass = (serverFlag & OCI_SERVER_FLAG_CONFIG_PASSWORD) ?TRUE : FALSE;
2.6.1.5 Restrictions

The username and password from the configuration store are not applicable for OCI session pool created in OCI_DEFAULT mode (heterogeneous pool). OCISessionPoolCreate() created with mode OCI_DEFAULT returns an error. For all other modes, it continues to work.

The username and password from the configuration store are not applicable for OCI connection pool. Error is returned if configuration store is detected while calling OCIConnectionPoolCreate() function.

The username and password from the configuration store are not applicable for Oracle Cloud Interface (OCI) connections created using OCI_CRED_EXT credential parameter or fetched using OCISessionGet() function having OCI_SESSGET_CREDEXT and OCI_SESSGET_CREDPROXY mode parameters.

2.6.2 Application Attributes

Table 2-2 Configurable Application Parameters

Parameter OCI Attribute Oraaccess Keys Azure Keys Oracle Cloud Infrastructure Keys Value Description
Prefetch rows OCI_ATTR_PREFETCH_ROWS
<prefetch>
<rows>[Value]</rows>
</prefetch>
/oci/prefetch_rows
"oci":
{"prefetch_rows":[Value]}
0 to UB4MAXVAL Specifies the number of rows to be prefetched during statement execute.
Statement cache size OCI_ATTR_STMTCACHESIZE <statement_cache>
/oci/statement_cache_size
"oci":
{"statement_cache_size":[Value]}
0 to UB4MAXVAL Specifies the number of OCI statement handles that can be cached per session.
Lob prefetch size OCI_ATTR_DEFAULT_LOBPREFETCH_SIZE <lob_prefetch_size>
/oci/lob_prefetch_size
"oci":
{"lob_prefetch_size":[Value]}
0 to UB4MAXVAL (bytes)

To improve OCI access of smaller LOBs, LOB data can be prefetched and cached while also fetching the locator.

Session min min argument in OCISessionPoolCreate() <min_size>
/oci/session_pool/min
"oci":
{
"session_pool":
  {
   "min": [Value]
  }
}
0 to UB4MAXVAL Minimum sessions in the pool
Session max max argument in OCISessionPoolCreate() <max_size>
/oci/session_pool/max
"oci":
{
"session_pool":
  {
   "max": [Value]
  }
}
0 to UB4MAXVAL Maximum sessions the pool can expand.
Session incr incr argument in OCISessionPoolCreate() <increment>
/oci/session_pool/increment
"oci":
{
"session_pool":
  {
   "increment": [Value]
  }
}
0 to UB4MAXVAL Increment by this value during pool expansion.
Max lifetime session OCI_ATTR_SPOOL_MAX_LIFETIME_SESSION
<max_life_time_session>
/oci/session_pool/max_lifetime_session
"oci":
{
"session_pool":
  {
   "max_lifetime_session": [Value]
  }
}
0 to UB4MAXVAL (seconds) Clean up session if max lifetime session is reached
Max use session OCI_ATTR_SPOOL_MAX_USE_SESSION <max_use_session>
/oci/session_pool/max_use_session
"oci":
{
"session_pool":
  {
   "max_use_session": [Value]
  }
}
0 to UB4MAXVAL Clean up session if reused certain times.
Inactivity timeout OCI_ATTR_SPOOL_TIMEOUT <inactivity_timeout>
/oci/session_pool/inactivity_timeout
"oci":
{
"session_pool":
  {
   "inactivity_timeout": [Value]
  }
}
0 to UB4MAXVAL (seconds) Clean up session if inactivity timeout expires.
2.6.2.1 Precedence
You can configure the OCI parameters in one of the following ways:
  • Cloud Config Store
  • oraaccess.xml
  • API specification

Centralized Configuration Store has the highest precedence followed by Oraaccess.xml while API specification has the least preference.

2.7 OCI Client-Side Deployment Parameters Using oraaccess.xml

This topic describes the OCI client-side deployment parameters using oraaccess.xml.

2.7.1 About oraaccess.xml

Starting with Oracle Database Release 12c Release 1 (12.1), Oracle provides an oraaccess.xml file, a client-side configuration file.

You can use the oraaccess.xml file to configure selected OCI parameters (some of which are accepted programatically in various OCI API calls), thereby allowing OCI behavior to be changed during deployment without modifying the source code that calls OCI.

Updates to the oraaccess.xml file will not affect already running clients. In order to pick up any updates to the oraaccess.xml file, already running clients need to be restarted.

The oraaccess.xml file is read from the directory specified by the TNS_ADMIN environment variable in regular and instant client installations. This is the $ORACLE_HOME/network/admin directory on UNIX operating systems and the %ORACLE_HOME%\NETWORK\ADMIN directory on Microsoft Windows operating systems, if TNS_ADMIN is not set in regular client installations.

2.7.2 About Client-Side Deployment Parameters Specified in oraaccess.xml

When equivalent parameters are set both in the sqlnet.ora and oraaccess.xml files, the oraaccess.xml file setting takes precedence over the corresponding sqlnet.ora file setting.

In such cases, Oracle recommends using the oraaccess.xml file settings moving forward. For any network configuration, the sqlnet.ora file continues to be the primary file as network level settings are not supported in the oraaccess.xml file.

2.7.3 High Level Structure of oraaccess.xml

Describes the high-level structure of the oraaccess.xml file.

The oraaccess.xml file has a top-level node <oraaccess> with the following three elements:

  • <default_parameters> - This element describes any default parameter settings shared across connections. These default parameters include:

    • Defaults for global parameters - These global parameters can only be specified once and hence are applicable to all connections and cannot be overridden at the connection level. These parameters are specified using the following tags:

      • <events> - Creates the OCI Environment in OCI_EVENTS mode, which is required for Fast Application Notification (FAN) and runtime connection load balancing

      • <result_cache> - Sets OCI client result cache parameters

      • <diag> - Sets OCI fault diagnosability parameters

    • Defaults for connection-specific parameters - Connection parameters can be set to different values for specific connections. However, they too can be defaulted, and overridden on a per connection string basis as needed. These defaults are shared across all connections (unless overridden at the connection level, which is described in the <config_descriptions> list item) that follows. These defaults are specified by the following tags:

      • <prefetch> - Sets the number of prefetch rows for all queries; specified using the <rows> parameter.

      • <statement_cache> - Sets the maximum number of statements that can be cached per session; specified using the <size> parameter.

      • <auto tune> - Consists of: <enable> to turn auto tuning on or off; <ram_threshold>, which sets the memory threshold for auto-tuning to stop using more memory when available physical memory on the client system has reached this threshold; and <memory_target>, which sets the memory limit that OCI auto-tuning can use per client process.

      • <fan_subscription_failure_action> - Sets the action upon subscription failure to be either the value trace or error.

      • <ons> - Sets a variety of ONS client-side deployment configuration parameters used for FAN notifications.

  • <config_descriptions> - This element associates a configuration alias element (<config_alias>), which is basically a name, with a specific set of parameters (<parameters>) that contain one or more connection parameters. These connection parameters are the same connection parameters within the element <default_parameters> described previously, namely: <prefetch>, <statement_cache>, <auto_tune>, <fan_subscription_failure_action> and <ons>.

  • <connection_configs> - This element associates one or more connection strings used by an application with a config alias, thus allowing multiple connection string elements to share the same set of parameters.

    A connection configuration element (<connection_config>) associates a connection string element (<connection_string>) with a configuration alias element (<config_alias>).

    A connection string is indirectly associated with a set of parameters through the configuration alias, which allows multiple connection string elements to share the same set of parameters.

The sections that follow describe these client-side deployment parameters in more detail.

2.7.4 About Specifying Global Parameters in oraaccess.xml

As described, the <default_parameters> tag allows specifying default values for various OCI parameters.

Of these, some parameters can only be specified once and hence apply to all connections. These global parameters are described using the following tags:

  • <events>

    This creates the OCI Environment in OCI_EVENTS mode, which is required for Fast Application Notification (FAN) and runtime connection load balancing.

    <events>
      true <!--value could be false also -->
    </events> 
    
  • <result_cache>

    • <max_rset_rows> - Maximum size of any result set in rows in the per-process query cache. Equivalent to OCI_RESULT_CACHE_MAX_RSET_ROWS in the sqlnet.ora file.

    • <max_rset_size> - Maximum client result cache size. Set the size to 32,768 bytes (32 Kilobytes (KB)) or greater. Equivalent to OCI_RESULT_CACHE_MAX_RSET_SIZE in the sqlnet.ora file.

    • <max_size> - Maximum size in bytes for the per-process query cache. Specifying a size less than 32,768 in the client disables the client result cache feature. Equivalent to OCI_RESULT_CACHE_MAX_SIZE in the sqlnet.ora file.

    <result_cache>
          <max_rset_rows>10</max_rset_rows>
          <max_rset_size>65535</max_rset_size>
          <max_size>65535</max_size>
    </result_cache>
    

    When equivalent parameters are set both in the sqlnet.ora and oraaccess.xml files, the oraaccess.xml file setting takes precedence over the corresponding sqlnet.ora file setting.

    See Table 2-3 for a listing of equivalent OCI parameter settings.

  • <diag>

    You can specify the following elements:

    • <adr_enabled> - Enables or disables diagnosability. Equivalent to DIAG_ADR_ENABLED in the sqlnet.ora file. Values: true or false.

    • <dde_enabled> - Enables or disables DDE. Values: true or false.

    • <adr_base> - Sets the ADR base directory, which is a system-dependent directory path string to designate the location of the ADR base to use in the current ADRCI session. Equivalent to ADR_BASE in the sqlnet.ora file. Value: directory path for ADR base directory.

    • <sighandler_enabled> - Enables or disables OCI signal handler. Values: true or false.

    • <restricted> - Enables or disables full dump files. Oracle Database client contains advanced features for diagnosing issues, including the ability to dump diagnostic information when important errors are detected. By default, these dumps are restricted to a small subset of available information, to ensure that application data is not dumped. However, in many installations, secure locations for dump files may be configured, ensuring the privacy of such logs. In such cases, it is recommended to turn on full dumps; this can greatly speed resolution of issues. Full dumps can be enabled by specifying a value of false. Values: true or false.

    • <trace_events> - Indicates the trace event number and the level of tracing to be in effect. Currently only event 10883 is supported. The available levels are 5 and 10.

    <diag>
       <adr_enabled>false</adr_enabled>
       <dde_enabled>false</dde_enabled>
       <adr_base>/foo/adr</adr_base>
       <sighandler_enabled>false</sighandler_enabled>
       <restricted>true</restricted>
       <trace_events>
         <trace_event>
           <number>10883</number>
           <level>5</level>
         </trace_event>
       </trace_events>
    </diag>
    

    When equivalent parameters are set both in the sqlnet.ora and oraaccess.xml files, the oraaccess.xml file setting takes precedence over the corresponding sqlnet.ora file setting.

    See Table 2-3 for a listing of equivalent OCI parameter settings.

    Table 2-3 Equivalent OCI Parameter Settings in oraaccess.xml and sqlnet.ora

    Parameter Group oraaccess.xml Parameters sqlnet.ora Parameters

    OCI client result cache

    <max_rset_rows>

    OCI_RESULT_CACHE_MAX_RSET_ROWS

    OCI client result cache

    <max_rset_size>

    OCI_RESULT_CACHE_MAX_RSET_SIZE

    OCI client result cache

    <max_size>

    OCI_RESULT_CACHE_MAX_SIZE

    OCI fault diagnosability

    <adr_enabled>

    DIAG_ADR_ENABLED

    OCI fault diagnosability

    <dde_enabled>

    DIAG_DDE_ENABLED

    OCI fault diagnosability

    <adr_base>

    ADR_BASE

See Also:

2.7.5 About Specifying Defaults for Connection Parameters

Describes the default values you can set for connection parameters shared across connections.

You can specify the following connection parameters that are shared across connections:

  • <prefetch> - Specifies prefetch row count for SELECT statements.

    <prefetch>
      <rows>100</rows>
    </prefetch>
    

    Setting this parameter appropriately can help reduce round-trips to the database, thereby improving application performance.

    Note that this only overrides the OCI_ATTR_PREFETCH_ROWS parameter (whether explicitly specified by the application or not). If the application has specified OCI_ATTR_PREFETCH_MEMORY explicitly, then the actual prefetch row count will be determined by using both constraints. The OCI_ATTR_PREFETCH_MEMORY constraint equivalent cannot be specified in the oraaccess.xml file.

    Also note that OCI prefetching may still get disabled if the SELECT statement fetches columns of specific data types. For more details, see About Fetching Results for information about limitations of OCI prefetch.

  • <statement_cache> - Specifies the number of OCI Statement handles that can be cached per session.

    <statement_cache>
      <size>100</size>
    </statement_cache>
    

    Caching statement handles improves repeat execute performance by reducing client side and server side CPU consumption and network traffic.

    Note that for this parameter to take effect, the application must be programmed to use OCIStatementPrepare2() and OCIStatementRelease() calls (and not the older OCISatementPrepare() and OCIHandleFree() equivalents for getting and disposing of statement handles.

  • <auto_tune> - Used to enable OCI Auto tuning.

    <auto_tune>
      <enable>true</enable>
      <ram_threshold>0.1</ram_threshold><!--percentage -->
      <memory target>2M</memory_target>
    </auto_tune>
    

    Enabling auto-tuning can help OCI automatically tune the statement-cache size based on specified memory constraints. This can help dynamically tune the statement cache size to an appropriate value based on runtime application characteristics and available memory resources.

    Note that for auto tuning OCI Statement Cache, the application must be programmed to use OCIStatementPrepare2() and OCIStatementRelease() calls (and not the older OCISatementPrepare() and OCIHandleFree() equivalents for getting and disposing of statement handles.

  • <fan_subscription_failure_action> - Used to determine how OCI responds to a failure to subscribe for FAN notifications.

    A value of trace records any failure to subscribe for FAN notifications (if FAN is enabled) in the trace file and OCI proceeds ignoring the failure. A value of error makes OCI return an error if an attempt to subscribe for FAN notifications fails.

    <fan>
      <!--only possible values are "trace" and "error" -->
      <subscription_failure_action>
        trace
      </subscription_failure_action>
    </fan>
    
  • <ons> - Sets up Oracle Notification Service (ONS) parameters.

    You can specify the following connection parameters:

    • <subscription_wait_timeout> - Length of time in seconds the client waits for its subscription to the ONS server.

    • <auto_config> - true or false. If true, the configuration specified in this section will augment the auto configuration information that the client receives from the database. If false, it will override the same.

    • <thread_stack_size> - Size in bytes of the event notification thread stack.

    • <debug> - true or false. Whether debug mode is on (true) or off (false).

    • <wallet_location> - Directory that contains an auto logon wallet file for a secure ONS subscription.

    • <servers> - Host list with ports and connection distribution.

    <ons> 
      <!--values or in seconds -->
      <subscription_wait_timeout>
        5
      </subscription_wait_timeout>
      <auto_config>true</auto_config> <!--boolean -->
      <threadstacksize>100k</threadstacksize>
      <debug>true</debug>
      <wallet_location>/etc/oracle/wallets/</wallet_location>
      <servers>
        <address_list>
           <name>pacific</name>
           <max_connections> 3 <\max_connections>
           <hosts>
             10.228.215.121:25293,
             10.228.215.122:25293
           </hosts>
        </address_list>
        <address_list>
           <name>Europe</name>
           <max_connections>3<\max_connections>
           <hosts>
             myhost1.mydomain.com:25273,
             myhost2.mydomain.com:25298,
             myhost3.mydomain.com:30004
           </hosts>
        </address_list>
      </servers>
    </ons>
    

See Also:

2.7.6 Overriding Connection Parameters at the Connection-String Level

Using the oraaccess.xml file also allows you to override the very same set of connection-specific parameters at the connection-string level as well.

This allows for overriding those connection-specific parameters based on requirements of individual applications.

Using the <config_descriptions> tag, you can specify a set of connection-specific parameters (<parameters>) to be associated with a configuration alias (<config_alias>, which creates a named group of connection-specific parameters). Thereafter, using the <connection_configs> tag, you can associate one or more connection-strings (specified using the <connection-string> tag) with a <config_alias>. This permits a level of indirection that allows multiple <connection_string> elements to share the same set of <parameters>.

Example 1

This example shows a very simple oraaccess.xml file configuration that highlights defaulting of global and connection parameters applicable across all connections.

<?xml version="1.0" encoding="ASCII" ?> 
<!--
     Here is a sample oraaccess.xml.
     This shows defaulting of global and connection parameters 
     across all connections. 
-->
 <oraaccess xmlns="http://xmlns.oracle.com/oci/oraaccess"
  xmlns:oci="http://xmlns.oracle.com/oci/oraaccess"
  schemaLocation="http://xmlns.oracle.com/oci/oraaccess
  http://xmlns.oracle.com/oci/oraaccess.xsd">
  <default_parameters>
    <prefetch>
      <rows>50</rows> 
    </prefetch>
    <statement_cache>
      <size>100</size> 
    </statement_cache>
    <result_cache>
      <max_rset_rows>100</max_rset_rows> 
      <max_rset_size>10K</max_rset_size> 
      <max_size>64M</max_size> 
    </result_cache>
  </default_parameters>
</oraaccess>

Example 2

This example shows connection parameters being overridden at the connection level.

<?xml version="1.0" encoding="ASCII" ?> 
<!-- 
        Here is a sample oraaccess.xml. 
        This highlights some connection parameters being
        overridden at the connection level
     --> 
 <oraaccess xmlns="http://xmlns.oracle.com/oci/oraaccess"
  xmlns:oci="http://xmlns.oracle.com/oci/oraaccess"
  schemaLocation="http://xmlns.oracle.com/oci/oraaccess
  http://xmlns.oracle.com/oci/oraaccess.xsd">
  <default_parameters>
    <prefetch>
      <rows>50</rows> 
    </prefetch>
    <statement_cache>
      <size>100</size> 
    </statement_cache>
    <auto_tune>
      <enable>true</enable> 
      <ram_threshold>2.67</ram_threshold> 
      <memory_target>204800</memory_target> 
    </auto_tune>
    <result_cache>
      <max_rset_rows>100</max_rset_rows> 
      <max_rset_size>10K</max_rset_size> 
      <max_size>64M</max_size> 
    </result_cache>
  </default_parameters>
    <!-- 
         Create configuration descriptions, which are  
         groups of connection parameters associated with
         a config_alias. 
    --> 
  <config_descriptions>
    <config_description>
      <config_alias>bar</config_alias> 
      <parameters>
        <prefetch>
          <rows>20</rows> 
        </prefetch>
      </parameters>
    </config_description>
    <config_description>
      <config_alias>foo</config_alias> 
      <parameters>
        <statement_cache>
          <size>15</size> 
        </statement_cache>
      </parameters>
    </config_description>
  </config_descriptions>
  <!--   
         Now map the connection string used by the application 
         with a config_alias.  
  --> 
  <connection_configs>
    <connection_config>
      <connection_string>hr_db</connection_string> 
      <config_alias>foo</config_alias> 
    </connection_config>
    <connection_config>
      <connection_string>finance_db</connection_string> 
      <config_alias>bar</config_alias> 
    </connection_config>
  </connection_configs>
</oraaccess>

Example 3

This example highlights setup for FAN notifications.

<?xml version="1.0" encoding="ASCII" ?> 
   <!--
    Here is a sample for oraaccess.xml for 
    setting up for FAN notifications.
   --> 
  <oraaccess xmlns="http://xmlns.oracle.com/oci/oraaccess"
    xmlns:oci="http://xmlns.oracle.com/oci/oraaccess"
    schemaLocation="http://xmlns.oracle.com/oci/oraaccess
    http://xmlns.oracle.com/oci/oraaccess.xsd">
    <default_parameters>
      <fan>
        <!-- only possible values are "trace" or "error" --> 
        <subscription_failure_action>
          error
        </subscription_failure_action> 
      </fan>
      <ons>
        <subscription_wait_timeout>
          5
        </subscription_wait_timeout> 
        <auto_config>true</auto_config>  
      </ons>
    <events>true</events> 
    </default_parameters>
  </oraaccess>

Example 4

This example highlights an advanced oraaccess.xml file configuration usage with manual ONS settings. Manual ONS settings should be used rarely.

  <?xml version="1.0" encoding="ASCII" ?> 
    <!-- 
       Here is a sample for oraaccess.xml that highlights
       manual ONS settings.
    --> 
  <oraaccess xmlns="http://xmlns.oracle.com/oci/oraaccess"
    xmlns:oci="http://xmlns.oracle.com/oci/oraaccess"
    schemaLocation="http://xmlns.oracle.com/oci/oraaccess
    http://xmlns.oracle.com/oci/oraaccess.xsd">
    <default_parameters>
      <fan>
       <!-- only possible values are "trace" or "error"  --> 
        <subscription_failure_action>
          error
        </subscription_failure_action> 
      </fan>
      <ons>
        <subscription_wait_timeout>
          5
        </subscription_wait_timeout> 
        <auto_config>true</auto_config>  
        <!--This provides the manual configuration for ONS.
            Note that this functionality should not need to be used
            as auto_config can normally discover this 
            information. --> 
        <servers>
          <address_list>
            <name>pacific</name> 
            <max_connections>3</max_connections> 
            <hosts>10.228.215.121:25293, 10.228.215.122:25293</hosts> 
          </address_list>
          <address_list>
            <name>Europe</name> 
            <max_connections>3</max_connections> 
            <hosts>myhost1.mydomain.com:25273, 
              myhost2.mydomain.com:25298, 
              myhost3.mydomain.com:30004</hosts> 
          </address_list>
        </servers>
      </ons>
      <events>true</events> 
    </default_parameters>
  </oraaccess>

See Also:

About Specifying Defaults for Connection Parameters about overriding the very same set of connection-specific parameters at the connection-string level

2.7.7 About OCI Session Pool Configuration in oraaccess.xml

Beginning with Oracle Database release 18c, version 18.1, the OCI session pool configuration can be set up using the oraaccess.xml client-side configuration file.

The OCI session pool is configured by specifying the following set of parameters in the oraaccess.xml configuration file. These parameters can be specified in the default parameters section or in the configuration descriptions section. If specified in the default parameters section, then it applies to all the session pools in the application. These settings can benefit any OCI Session Pool allowing OCI Session Pool settings to be overridden.
  • <session_pool> — Sets up session pool parameters.

    • <enable> — Setting this to true makes the session pool configuration effective. This is a mandatory parameter, that means, if the <session_pool> parameter is configured, then <enable> parameter must also be configured.

  • <min_size> — Minimum number of connections in the pool. The default is 0.

  • <max_size> — Maximum number of connections in the pool. This is a mandatory parameter, that means, if the <session_pool> parameter is configured, then <max_size> parameter must also be configured.

  • <increment> — Amount of increase in the number of connections in the pool as the pool expands. The default is 1.

  • <inactivity_timeout> — Maximum time in seconds for which a connection stays idle in the pool, after which it is terminated. The default is 0, that means, there is no limit for which a connection stays idle in the pool.

  • <max_use_session> — Maximum number of times a connection can be taken and released to the pool. The default is 0, that means, there is no limit to take a connection and release to the pool.

  • <max_life_time_session> — Time, in seconds, a connection will stay after it has been created in the pool. The default is 0, that means, there is no limit for a connection to stay after it has been created in the pool.

Using the oraaccess.xml file allows you to configure an OCI session pool for each needed connection service. The following example shows two groups of connection parameters associated with its respective config alias, the sales_config and the hr_config, where each connection string that the application uses is mapped with its respective config alias, thus providing two OCI session pools.
<oraaccess xmlns="http://xmlns.oracle.com/oci/oraaccess"
            xmlns:oci="http://xmlns.oracle.com/oci/oraaccess"
            schemaLocation="http://xmlns.oracle.com/oci/oraaccess
            http://xmlns.oracle.com/oci/oraaccess.xsd">
  <default_parameters>
  </default_parameters>
    <!-- 
         Create configuration descriptions, which are  
         groups of connection parameters associated with
         a config_alias. 
    --> 
  <config_descriptions>
    <config_description>
      <config_alias> sales_config </config_alias> 
      <parameters>
         <session_pool>
            <enable>true</enable> 
            <min_size> 10 </min_size>
            <max_size> 100 </max_size>
            <increment> 5 </increment>
         </session_pool>
      </parameters>
    </config_description>
    <config_description>
      <config_alias> hr_config </config_alias> 
      <parameters>
         <session_pool>
            <enable>true</enable>
            <max_size> 10 </max_size>
         </session_pool>
      </parameters>
    </config_description>
  </config_descriptions>
  <!--   
         Now map the connection string used by the application 
         with a config_alias.  
  --> 
  <connection_configs>
    <connection_config>
      <connection_string>sales.us.acme.com</connection_string> 
      <config_alias>sales_config</config_alias> 
    </connection_config>
    <connection_config>
      <connection_string>hr.us.acme.com</connection_string> 
      <config_alias>hr_config</config_alias> 
    </connection_config>
  </connection_configs>
</oraaccess>

2.7.8 File (oraaccess.xml) Properties

Lists some high level rules with regards to the oraaccess.xml file syntax stated here for simplicity.

The XML schema specified in the oraaccess.xsd file is the ultimate formal reference for oraaccess syntax:

  • The contents of the file are case sensitive, and all elements (tags, parameter names) are in lower case.

  • Comments are allowed between parameters (nodes); for example, Comment "<!-- comments -->".

  • For the syntax with respect to the order of the parameters, see the XML Schema: oraaccess.xsd file (see information about the oraaccess.xsd file later in this list).

  • For memory size, valid values and formats are 100, 100k, 100K, 1000M, and 1121m. This means only suffixes 'M', 'm', 'K', 'k', or no suffix are allowed. 'K' or 'k' means kilobytes and 'M' or 'm' means megabytes. No suffix means the size is in bytes.

  • <ram_threshold> should be a decimal number between 0 and 100 and indicates a percentage value.

  • Where a number is expected, only positive unsigned integers are allowed; no sign is allowed. An example of a valid number usage is <statement_cache> <size>100</size> </statement_cache>).

  • Configuration alias names (<config_alias>foo</config_alias>) are not case-sensitive

  • String parameters (such as <config_alias>) are not expected to be quoted.

  • These rules are all encapsulated in the schema definition.

  • OCI will report an error if OCI is provided an invalid oraaccess.xml file.

  • Before deploying an oraaccess.xml file, Oracle recommends that you validate it with the Oracle supplied XML schema file: oraaccess.xsd. The schema file is installed under ORACLE_HOME/rdbms/admin in a regular client and under instantclient_12_2/sdk/admin in an instant client SDK. Customers can use their own favorite XML validation tools to perform the validation after modifying the oraaccess.xml file.

  • Sample oraaccess.xml files can be found in the ORACLE_HOME/rdbms/demo directory in a regular client and in the instantclient_12_2/sdk/demo in an instant client. The parameters in these files are for demonstration purpose only and should be modified and tested as per the application's requirement before deploying it.

2.8 About Compatibility and Upgrading

The following sections discuss issues concerning compatibility between different releases of OCI client and server, changes in the OCI library routines, and upgrading an application from the release 7.x OCI to the current release of OCI:

2.8.1 Oracle Client and Server Cross Version Compatibility

As a general guide, Oracle client and server versions are cross version compatible with a number versions.

This means that you can connect to some older and newer versions of the database and do not always have to upgrade both the client and server at the same time.

However, certain products or utilities may impose additional restrictions on supported combinations specific to the product or utility.

See Also:

My Oracle Support Document 207303.1 for information about client and server interoperability support matrix for different Oracle versions.

2.8.2 Version Compatibility of Statically Linked and Dynamically Linked Applications

Here are the rules for relinking for a new release.

  • Statically linked OCI applications:

    Statically linked OCI applications must be relinked for both major and minor releases, because the statically linked Oracle Database client-side library code may be incompatible with the error messages in the upgraded Oracle home. For example, if an error message was updated with additional parameters then it is no longer compatible with the statically linked code.

  • Dynamically linked OCI applications:

    Dynamically linked OCI applications from Oracle Database 10g and later releases need not be relinked. That is, the Oracle Database client-side dynamic library is upwardly compatible with the previous version of the library. Oracle Universal Installer creates a symbolic link for the previous version of the library that resolves to the current version. Therefore, an application that is dynamically linked with the previous version of the Oracle Database client-side dynamic library does not need to be relinked to operate with the current version of the Oracle Database client-side library.

    Note:

    If the application is linked with a runtime library search path (such as -rpath on Linux), then the application may still run with the version of Oracle Database client-side library it is linked with. To run with the current version of Oracle Database client-side library, it must be relinked.

    See Also:

2.8.3 Unsupported OCI Routines

The release 7.3 OCI calls are not supported. Table 3-3 lists the 7.x OCI calls with their supported equivalents.

Table 2-4 Unsupported OCI Functions

7.x OCI Routine Equivalent or Similar Later OCI Routine

obindps(), obndra(), obndrn(), obndrv()

OCIBindByName() or OCIBindByName2(), OCIBindByPos() or OCIBindByPos2() (Note: additional bind calls may be necessary for some data types)

obreak()

OCIBreak()

ocan()

none

oclose()

Note: cursors are not used in release 8.x or later

ocof(), ocon()

OCIStmtExecute() with OCI_COMMIT_ON_SUCCESS mode

ocom()

OCITransCommit()

odefin(), odefinps()

OCIDefineByPos() or OCIDefineByPos2() (Note: additional define calls may be necessary for some data types)

odescr()

Note: schema objects are described with OCIDescribeAny(). A describe, as used in release 7.x, most often be done by calling OCIAttrGet() on the statement handle after SQL statement execution.

odessp()

OCIDescribeAny()

oerhms()

OCIErrorGet()

oexec(), oexn()

OCIStmtExecute()

oexfet()

OCIStmtExecute(), OCIStmtFetch2() (Note: result set rows can be implicitly prefetched)

ofen(), ofetch()

OCIStmtFetch2()

oflng()

none

ogetpi()

OCIStmtGetPieceInfo()

olog()

OCILogon() or OCILogon2()

ologof()

OCILogoff()

onbclr(), onbset(), onbtst()

Note: nonblocking mode can be set or checked by calling OCIAttrSet() or OCIAttrGet() on the server context handle or service context handle

oopen()

Note: cursors are not used in release 8.x or later

oopt()

none

oparse()

OCIStmtPrepare2(); however, it is all local

opinit()

OCIEnvCreate()

orol()

OCITransRollback()

osetpi()

OCIStmtSetPieceInfo()

sqlld2()

SQLSvcCtxGet or SQLEnvGet

sqllda()

SQLSvcCtxGet or SQLEnvGet

odsc()

Note: see odescr() preceding

oermsg()

OCIErrorGet()

olon()

OCISessionGet()

orlon()

OCISessionGet()

oname()

Note: see odescr() preceding

osql3()

Note: see oparse() preceding

obind()

OCIBindByName(), OCIBindByPos() (Note: additional bind calls may be necessary for some data types)

obindn()

OCIBindByName(), OCIBindByPos() (Note: additional bind calls may be necessary for some data types)

odfinn()

OCIDefineByPos() (Note: additional define calls may be necessary for some data types)

odsrbn()

Note: see odescr() in Table 2-4

ologon()

OCISessionget()

osql()

Note: see oparse() Table 2-4

See Also:

  • OCI Programming Basics for information about what additional program logic may be required before or after the new or current call is made.

2.9 Fault Diagnosability in OCI

2.9.1 About Fault Diagnosability in OCI

Fault diagnosability was introduced into OCI in Oracle Database 11g Release 1 (11.1).

An incident (an occurrence of a problem) on the OCI client is captured without user intervention in the form of diagnostic data: dump files or core dump files. Up to Release 11.2.0.1, the diagnostic data was stored in an Automatic Diagnostic Repository (ADR) subdirectory created for the incident. For example, if a Linux or UNIX application fails with a NULL pointer reference, then the core file is written in the ADR home directory (if it exists) instead of the operating system directory. The ADR subdirectory structure and a utility to deal with the output, ADR Command Interpreter (ADRCI), are discussed in the following sections. However, beginning with Release 11.2.0.2, the diagnostic data is stored in the current directory.

An ADR home is the root directory for all diagnostic data for an instance of a particular product such as OCI and a particular operating system user. ADR homes are grouped under the same root directory, the ADR base.

Fault diagnosability and the ADR structure for Oracle Database are described in detail in the discussion of managing diagnostic data in Oracle Database Administrator's Guide.

2.9.2 ADR Base Location

Describes how the location of the ADR base is determined.

The location of the ADR base is determined by OCI in the following order:

  1. For all diagnosability parameters, OCI first looks in the file oraaccess.xml. If these parameters are not set there, then OCI looks next in sqlnet.ora (if it exists) for a statement such as (Linux or UNIX):

    ADR_BASE=/foo/adr
    

    adr (the name of a directory) must exist and be writable by all operating system users who execute OCI applications and want to share the same ADR base. foo stands for a path name. The location of sqlnet.ora is given in the directory $TNS_ADMIN (%TNS_ADMIN% on Windows). If there is no $TNS_ADMIN then the current directory is used. If ADR_BASE is set and one sqlnet.ora is shared by all users, then OCI stops searching when directory adr does not exist or is not writable by the user. If ADR_BASE is not set, then OCI continues the search, testing for the existence of certain directories.

    For example, if sqlnet.ora contains the entry ADR_BASE=/home/chuck/test then the ADR base is /home/chuck/test/oradiag_chuck and the ADR home could be something like /home/chuck/test/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11.

  2. $ORACLE_BASE (%ORACLE_BASE% on Windows) exists. In this case, the client subdirectory exists because it was created during installation of the database using Oracle Universal Installer.

    For example, if $ORACLE_BASE is /home/chuck/obase then the ADR base is /home/chuck/obase and the ADR home could be similar to /home/chuck/obase/diag/clients/user_chuck/host_4144260688_11.

  3. $ORACLE_HOME (%ORACLE_BASE% on Windows) exists. In this case, the client subdirectory exists because it was created during installation of the database using Oracle Universal Installer.

    For example, if $ORACLE_HOME is /ade/chuck_l1/oracle then the ADR base is /ade/chuck_l1/oracle/log and the ADR home could be similar to /ade/chuck_l1/oracle/log/diag/clients/user_chuck/host_4144260688_11.

  4. Operating system home directory: $HOME on Linux or UNIX, or %USERPROFILE% on Windows. On Linux or UNIX the location could be something like this for user chuck: /home/chuck/oradiag_chuck. On Windows, a folder named Oracle is created under C:\Documents and Settings\chuck.

    For example, in an Instant Client, if $HOME is /home/chuck then the ADR base is /home/chuck/oradiag_chuck and the ADR home could be /home/chuck/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11.

  5. On Windows, if the application is run as a service, the home directory option is skipped.

  6. Temporary directory in the Linux or UNIX operating system: /var/tmp.

    For example, in an Instant Client, if $HOME is not writable, then the ADR base is /var/tmp/oradiag_chuck and the ADR home could be /var/tmp/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11.

    Temporary directories in the Windows operating system, searched in the foolowing order:

    1. %TMP%

    2. %TEMP%

    3. %USERPROFILE%

    4. Windows system directory

If none of these directory choices are available and writable, or the ADR base is not created, then there are no diagnostics.

2.9.3 Using ADRCI

ADRCI is a command-line tool that enables you to view diagnostic data within the ADR and to package incident and problem information into a zip file for Oracle Support to use.

You can use ADRCI interactively and from a script. A problem is a critical error in OCI or the client. Each problem has a problem key. An incident is a single occurrence of a problem and is identified by a unique numeric incident ID. Each incident has a problem key that is a set of attributes: the ORA error number, error parameter values, and other information. Two incidents have the same root cause if their problem keys match.

What follows is a launch of ADRCI in a Linux system, a use of the HELP command for the SHOW BASE command, and then the use of the SHOW BASE command with the option -PRODUCT CLIENT, which is necessary for OCI applications. The ADRCI commands are case-insensitive. User input is shown in bold.

% adrci
 
ADRCI: Release 12.2.0.0.0 - Development on Wed Dec 2 18:26:29 2015 
Copyright (c) 1982, 2015, Oracle.  All rights reserved. ADR base = "/u01/app/oracle/log"

 
adrci> help show base
 
  Usage: SHOW BASE [-product <product_name>]
 
  Purpose: Show the current ADR base setting.
 
  Options:
    [-product <product_name>]: This option allows users to show the
    given product's ADR Base location. The current registered products are
    "CLIENT" and "ADRCI".
 
  Examples: 
    show base -product client
    show base
 
adrci> show base -product client
ADR base = "/u01/app/oracle/log"

Next, the SET BASE command is described:

adrci> help set base
 
  Usage:  SET BASE <base_str> | -product <product_name>
 
  Purpose: Set the ADR base to use in the current ADRCI session.
           If there are valid ADR homes under the base, all homes will
           will be added to the current ADRCI session.
 
  Arguments:
    <base_str>: It is the ADR base directory, which is a system-dependent
    directory path string.
    -product <product_name>: This option allows users to set the 
    given product's ADR Base location. The current registered products are
    "CLIENT" and "ADRCI".
 
  Notes:
    On platforms that use "." to signify current working directory,
    it can be used as base_str.
 
  Example: 
    set base /net/sttttd1/scratch/someone/view_storage/someone_v1/log
    set base -product client
    set base .
 
adrci> quit

When ADRCI is started, the default ADR base is for the rdbms server. $ORACLE_HOME is set to "/u01/app/oracle/":

% adrci
 
ADRCI: Release 12.2.0.0.0 - Development on Wed Dec 2 18:26:29 2015
 
Copyright (c) 1982, 2015, Oracle.  All rights reserved.
 
ADR base = "/u01/app/oracle/log"
 adrci>

For OCI application incidents you must check and set the base:

adrci> show base -product client
ADR base is "/u01/app/oracle/log" 
adrci> set base /home/chuck_13/oradiag_chuck

For Instant Client there is no $ORACLE_HOME, so the default base is the user's home directory:

adrci> show base -product client
ADR base is "/home/chuck_13/oradiag_chuck"
adrci> set base /home/chuck/oradiag_chuck
adrci> show incidents
 
ADR Home = /home/chuck/oradiag_chuck/diag/clients/user_chuck/host_4144260688_11:
*************************************************************************
INCIDENT_ID    PROBLEM_KEY           CREATE_TIME
-------------------------------------------------------------------------
1                     oci 24550 [6]              2015-12-02 17:20:02.803697 -07:00                      
1 rows fetched
 
adrci>

See Also:

Oracle Database Utilities for an introduction to ADRCI

2.9.4 Controlling ADR Creation and Disabling Fault Diagnosability Using sqlnet.ora

Describes how to control ADR creation and disabling fault diagnosability using sqlnet.ora.

To disable diagnosability, turn off diagnostics by setting the following parameters in sqlnet.ora (the default is TRUE):

DIAG_ADR_ENABLED=FALSE
DIAG_DDE_ENABLED=FALSE

To turn off the OCI signal handler and reenable standard operating system failure processing, place the following parameter setting in sqlnet.ora:

DIAG_SIGHANDLER_ENABLED=FALSE

As noted previously, ADR_BASE is used in sqlnet.ora to set the location of the ADR base.

Oracle Database client contains advanced features for diagnosing issues, including the ability to dump diagnostic information when important errors are detected. By default, these dumps are restricted to a small subset of available information, to ensure that application data is not dumped. However, in many installations, secure locations for dump files may be configured, ensuring the privacy of such logs. In such cases, it is recommended to turn on full dumps; this can greatly speed resolution of issues. Full dumps can be enabled by adding the following line to the sqlnet.ora file used by your Oracle Database client installation:

DIAG_RESTRICTED=FALSE

To verify that diagnosability features are working correctly:

  1. Upgrade your application to use the latest client libraries.
  2. Start your application.
  3. Check the file sqlnet.log in your application's TNS_ADMIN directory for error messages indicating that diagnosability could not be started (normally this is due to invalid directory names or permissions).

See Also:



Footnote Legend

Footnote 1:

Returns an ORA-01805 error when timezone files on the client and server do not match (regions are not synchronized); returns OCI_SUCCESS when region time zone values are the same (represent the same instant in UTC), though the TIME ZONE offsets are different.