16 Troubleshooting Oracle Net Services

Oracle Net Services provides methods for understanding, testing and resolving network problems. Oracle Database includes utilities, and log and trace files for testing and diagnosing network connection and problems.

The TNSPING and TRCROUTE utilities test connectivity. The log and trace files keep track of the interaction between network components as errors occur. Evaluating this information helps to diagnose and troubleshoot network problems.

Understand the common testing procedures and network errors, and outline procedures for resolving problems. Also, learn methods for logging and tracing error information to diagnose and troubleshoot more complex network problems.

16.1 Understanding Automatic Diagnostic Repository

The Automatic Diagnostic Repository (ADR) (ADR) is a system-wide tracing and logging central repository.

The repository is a file-based hierarchical data store for depositing diagnostic information, including network tracing and logging information.

The ADR home is the unit of the ADR directory that is assigned to an instance of an Oracle product. Each database instance has its own ADR home. Similarly, each listener, Oracle Connection Manager, and client instance has its own ADR home.

In case of a process failure, an incident is generated. The incident dump files are located in the ADR_BASE/ADR_HOME/incident/ directory, By default, ADR_BASE is ORACLE_BASE if the ORACLE_BASE variable is set. If the variable is not set, then ADR_BASE is ORACLE_HOME/log. ADR_BASE can be set to any location.

The incident dump file location can be found inside the process trace file.

The location of an ADR home is given by the following path, which starts at the ADR base directory:

diag/product_type/product_id/instance_id

The following table lists the values of the path components for an Oracle Net Listener instance.

Table 16-1 ADR Home Path Components for an Oracle Net Listener Instance

Path Component Value for Oracle Net Listener

product_type

tnslsnr

product_id

host name

instance_id

listener alias name

The following figure illustrates the directory hierarchy of the ADR for an Oracle Net Listener instance. Other ADR homes for other Oracle products or components, such as Automatic Storage Management (ASM) or Oracle Database, can exist within this hierarchy, under the same ADR base.

Figure 16-1 Directory Structure for an Oracle Net Listener Instance

Description of Figure 16-1 follows
Description of "Figure 16-1 Directory Structure for an Oracle Net Listener Instance"

The following table lists the values of the path components for an Oracle Connection Manager instance.

Table 16-2 ADR Home Path Components for an Oracle Connection Manager Instance

Path Component Value for Oracle Connection Manager

product_type

netcman

product_id

host name

instance_id

Oracle Connection Manager instance name

The following figure illustrates the directory hierarchy of the ADR for an Oracle Connection Manager instance. Other ADR homes for other Oracle products or components, such as Oracle ASM or Oracle Database, can exist within this hierarchy, under the same ADR base.

Figure 16-2 Directory Structure for an Oracle Connection Manager Instance

Description of Figure 16-2 follows
Description of "Figure 16-2 Directory Structure for an Oracle Connection Manager Instance"

Within the ADR home directory are subdirectories where each instance, such as the database, listener, Oracle Connection Manager, or client, stores diagnostic data. The following table lists all the subdirectories shown in the preceding figure and their contents.

Table 16-3 ADR Home Subdirectories

Subdirectory Name Contents

alert

The XML-formatted log named log.xml.

cdump

Core files.

incident

Multiple subdirectories, in which each subdirectory is named for a particular incident, and each contains dumps pertaining only to that incident.

trace

Background and server process trace files, SQL trace files, and text version of the log.xml file in the alert directory.

(others)

Other subdirectories of ADR home, which store incident packages, health monitor reports, and other information.

The ADR_BASE directory is the physical location in which one or more ADR homes are placed. Conceptually, it is the root directory of ADR.

Non-ADR (meaning that the DIAG_ADR_ENABLED parameter is set to OFF) diagnostic and tracing methods are still current and applicable but the parameters are ignored if ADR is enabled. ADR is enabled by default.

Diagnostic parameters are found in the following configuration files:

  • sqlnet.ora for clients

  • listener.ora for listeners

  • cman.ora for Oracle Connection Managers

The following table compares usage of diagnostic parameters found in the sqlnet.ora file, which is used in both ADR-based and non-ADR-based diagnostics.

Table 16-4 sqlnet.ora File Diagnostic Parameter Comparison

Parameter DIAG_ADR_ENABLED=ON DIAG_ADR_ENABLED=OFF

ADR_BASE

Enabled

Disabled

ENABLE_CONCISE_LOGS

Enabled

Enabled

LOG_SUPPRESSED_COUNT

Enabled

Enabled

LOG_SUPPRESSED_TIME

Enabled

Enabled

LOG_DIRECTORY_CLIENT

Disabled

Enabled

LOG_FILE_CLIENT

Disabled

Enabled

LOG_DIRECTORY_SERVER

Disabled

Enabled

TRACE_DIRECTORY_CLIENT

Disabled

Enabled

TRACE_DIRECTORY_SERVER

Disabled

Enabled

TRACE_LEVEL_CLIENT

Enabled

Enabled

TRACE_LEVEL_SERVER

Enabled

Enabled

TRACE_FILE_CLIENT

Disabled

Enabled

TRACE_FILE_SERVER

Disabled

Enabled

TRACE_UNIQUE_CLIENT

Disabled

Enabled

The following table compares usage of diagnostic parameters found in the listener.ora file, which is used in both ADR-based and non-ADR-based diagnostics.

Table 16-5 listener.ora File Diagnostic Parameter Comparison

Parameter DIAG_ADR_ENABLED=ON DIAG_ADR_ENABLED=OFF

ADR_BASE_listener_name

Enabled

Disabled

LOGGING_listener_name

Enabled

Enabled

TRACE_LEVEL_listener_name

Enabled

Enabled

TRACE_TIMESTAMP_listener_name

Enabled

Enabled

LOG_DIRECTORY_CLIENT_listener_name

Disabled

Enabled

LOG_FILE_CLIENT_listener_name

Disabled

Enabled

TRACE_DIRECTORY_CLIENT_listener_name

Disabled

Enabled

TRACE_FILELEN_listener_name

Disabled

Enabled

TRACE_FILENO_listener_name

Disabled

Enabled

The following table compares usage of diagnostic parameters found in the cman.ora file, which is used in both ADR-based and non-ADR-based diagnostics.

Table 16-6 cman.ora File Diagnostic Parameter Comparison

Parameter DIAG_ADR_ENABLED=ON DIAG_ADR_ENABLED=OFF

ADR_BASE

Enabled

Disabled

LOG_LEVEL

Enabled

Enabled

TRACE_LEVEL

Enabled

Enabled

TRACE_TIMESTAMP

Enabled

Enabled

LOG_DIRECTORY

Disabled

Enabled

TRACE_DIRECTORY

Disabled

Enabled

TRACE_FILELEN

Disabled

Enabled

TRACE_FILENO

Disabled

Enabled

16.1.1 ADRCI: ADR Command Interpreter

ADRCI is a command-line tool that is part of the fault diagnosability infrastructure. ADRCI enables you to do the following:

  • View diagnostic data within ADR

  • Package incident and problem information into a zip file for transmission to Oracle Support Services

Diagnostic data includes incident and problem descriptions, trace files, dumps, health monitor reports, alert log entries, and so on.

ADRCI has a rich command set, and can be used in interactive mode or within scripts. In addition, ADRCI can run scripts of ADRCI commands in the same way that SQL*Plus runs scripts with SQL and PL/SQL commands.

To view trace files using ADRCI, enter ADRCI at a command line. The following are common ADRCI commands used to check a client:

Client Side

adrci> SHOW ALERT
adrci> SHOW BASE -product client
adrci> SET BASE -product client
adrci> SHOW TRACEFILE
adrci> SHOW TRACE trace_file.trc
adrci> SHOW SPOOL

In the preceding commands, the SHOW ALERT command shows the log.xml file in a text editor, such as VI. The SHOW BASE -product client command displays the value of the ADR_BASE directory for the client. Use that value for client in the SET BASE command.

The following are common ADRCI commands used to check a server:

Server Side

adrci> SHOW BASE
adrci> SHOW TRACEFILE
adrci> SHOW TRACE trace_file.trc

Other ADRCI command options are available for a more targeted Oracle Net trace file analysis. Type HELP at the ADRCI prompt for help documentation.

See Also:

Oracle Database Utilities for additional information about ADRCI

16.2 Diagnosing Oracle Net Services

Any underlying fault, noticeable or not, is reported by Oracle Net Services with an error number or message. The error number and message provide useful information for diagnosing the problem, but may not always identify the actual problem.

This section helps you determine the parts of Oracle Net Services that function properly. You can also determine one of the following categories to which the fault belongs:

  • Oracle software
  • Operating system layer
  • Other network layers

Testing the various network layers progressively should, in most cases, uncover any problem.

Starting with Oracle Database 21c, a connection identifier is available for each network connection. The connection identifier uniquely identifies a connection in trace and logs of different network elements and helps in correlating diagnostic data from these elements.

When a SQL*Net connection has multiple hops, such as from a client to Oracle Connection Manager (CMAN) and then to a server, correlating diagnostic information from the existing logs and traces becomes difficult. However, with the availability of a connection identifier, you can correlate diagnostics, track network data traffic, and resolve connectivity errors.

The connection identifier consists of two components, namely, CONNECTION_ID and CONNECTION_ID_PREFIX. The CONNECTION_ID parameter contains a unique value, which is generated when the connection originates at the client. The CONNECTION_ID_PREFIX is an application specific prefix parameter that is added to the connection identifier.

16.2.1 Diagnosing Server Problems

To start diagnosing server problems, you should answer the following questions:

  • Is any other system such as a workstation or server able to connect to the server using Oracle Net?

  • Has the server, database, or listener configuration remained the same for some time?

If you answered yes to either of the preceding questions, then go to "Diagnosing Client Problems".

If you are unsure, or answered no to any of the preceding questions, then use the tasks in this section to diagnose the problem. Diagnosing Oracle Net Services on the server involves the following tasks:

Task 1   Verify the Database is Running

To check that the database is up, log in to the database and connect with a valid username and password. For example:

SQLPLUS system
Enter password: password

A message appears, confirming that you are connected with the database. If you receive the following errors, then ask the database administrator to assist you:

  • ORA-1017: invalid U/P

  • ORA-1034: Oracle not available

Task 2   Perform a Loopback Test

A loopback test uses Oracle Net to go from the database server back to itself, bypassing the Interprocess Communication (IPC) protocol. Many network protocols provide a means of testing network connections. The PING utility can be used with a TCP/IP network. Performing a successful loopback verifies that Oracle Net is functioning on the database server.

The following procedure describes how to perform a loopback test from the server to the database:

  1. Ensure that the listener.ora, tnsnames.ora, and sqlnet.ora files exist in the correct locations, as described in "Using Localized Management".

  2. Start Oracle Net Manager.

  3. In the navigator, expand the Directory or Local option.

  4. Expand Service Naming to view the available network service and database names.

  5. Select the network service name or database service.

  6. Choose Command, and then select Test Net Service.

    Testing assumes the listener and database are running. If they are not, then see "Starting Oracle Net Listener and the Oracle Database Server" to start components.

    During testing, a Connection Test dialog box appears, providing status and test results. A successful test results in the following message:

    The connection test was successful.
    

    If the test was successful, then proceed to step 7.

    If the test was not successful, then do the following:

    1. Ensure the database and listener are running, and then click Test.

    2. Click Change Login to change the username and password for the connection, and then click Test.

    • If the loopback test passes, then go to "Diagnosing Client Problems".

    • If the loopback test continues to fail, then contact Oracle Support Services.

  7. Click Close to close the Connect Test dialog box.

16.2.2 Diagnosing Client Problems

Verify at least one of the following statements. This will help you decide if it is a client problem.

  • The database server passed a loopback test, showing the connection worked.

  • Other computers connect using Oracle Net Services to the same database.

  • Connections from this workstation worked before making changes on this computer, such as the installation of a new product or modification to the network configuration.

The following procedure describes how to perform diagnostics on the client:

  1. Check that you have installed the same protocol support that was installed on the database server.

    On Linux and UNIX platforms you can use the ADAPTERS utility to verify protocol support. On the database server, run the following command from the ORACLE_HOME/bin directory to display the protocol support, naming methods, and security options linked with the oracle executable:

    adapters ./oracle
    

    The adapters utility displays output similar to the following:

    Installed Oracle Net transport protocols are:
    
        IPC
        BEQ
        TCP/IP
        SSL
        RAW
        SDP/IB
    
    Installed Oracle Net naming methods are:
    
        Local Naming (tnsnames.ora)
        Oracle Directory Naming
        Oracle Host Naming
        NIS Naming
    
    Installed Oracle Advanced Security options are:
    
        RC4 40-bit encryption
        RC4 56-bit encryption
        RC4 128-bit encryption
        RC4 256-bit encryption
        DES40 40-bit encryption
        DES 56-bit encryption
        3DES 112-bit encryption
        3DES 168-bit encryption
        AES 128-bit encryption
        AES 192-bit encryption
        AES 256-bit encryption
        MD5 crypto-checksumming
        SHA crypto-checksumming (for FIPS)
        SHA-1 crypto-checksumming
        Kerberos v5 authentication
        RADIUS authentication
    

    On the client, run the adapters command from the ORACLE_HOME/bin directory to display the configured Oracle protocol support, naming methods, and security options. The ADAPTERS utility displays output similar to the following:

    Installed Oracle Net transport protocols are:
    
        IPC
        BEQ
        TCP/IP
        SSL
        RAW
        SDP/IB
        Exadirect
    
    Installed Oracle Net naming methods are:
    
        Local Naming (tnsnames.ora)
        Oracle Directory Naming
        Oracle Host Naming
       
    Installed Oracle Advanced Security options are:
    
        RC4 40-bit encryption
        RC4 56-bit encryption
        RC4 128-bit encryption
        RC4 256-bit encryption
        DES40 40-bit encryption
        DES 56-bit encryption
        3DES 112-bit encryption
        3DES 168-bit encryption
        AES 128-bit encryption
        AES 192-bit encryption
        AES 256-bit encryption
        MD5 crypto-checksumming
        SHA-1 crypto-checksumming
        Kerberos v5 authentication
        RADIUS authentication

    Note:

    • The DES, DES40, 3DES 112, 3DES 168, RC4 40, RC4 56, RC4 128, RC4 256, and MD5 algorithms are deprecated in this release.

      To transition your Oracle Database environment to use stronger algorithms, download and install the patch described in My Oracle Support note 2118136.2.

    • RAW is an internal protocol used by Oracle Net.

    See Also:

    Oracle Database Administrator's Reference for additional information about the adapters utility

  2. Check base connectivity for underlying network transport. Oracle Net technology depends on the underlying network for a successful connection.

    Table 16-7 Verify Base Connectivity for Network Transport

    Protocol Verify that you can...

    TCP/IP

    Use terminal emulation or file transfer utilities, (PING, FTP, TELNET) from the client to the database server.

    Named Pipes

    • See other computers or servers on the Microsoft network.

    • Ensure that you are able to share drives within the network.

  3. Ensure that the Oracle Net foundation layer and the appropriate Oracle protocol support are present by verifying that all Oracle Net Services software has been installed for the client.

  4. Ensure that the client computer has the tnsnames.ora and the sqlnet.ora files in the correct locations.

    If any other working client computers are connecting to the selected Oracle Database, then back up your existing files and copy both the working tnsnames.ora and sqlnet.ora files from the working client computer to the non-working clients. This eliminates the possibility of errors in the files.

  5. Test the Oracle Net foundation layer. You can test using the following command to connect to SQL*Plus:

    SQLPLUS user/password@connect_string

    Note:

    Do not use the TNSPING utility. The TNSPING utility works like the TCP/IP ping utility and does not create and open a socket, nor does it connect with the listener. It only shows that the listener is present on the database server.

  6. If the connection still fails, then do the following:

    1. Use tracing, as described in section "Tracing Error Information for Oracle Net Services".

    2. Check the Oracle Support Services website for a specific diagnostics bulletin on the error received.

    3. Contact Oracle Support Services.

16.3 Resolving the Most Common Error Messages for Oracle Net Services

Due to the complexity of network communications, network errors may originate from a variety of sources, for a variety of reasons. If an error occurs, then applications such as SQL*Plus, that depend on network services from Oracle Net Services, normally generate an error message.

For information about the specific error messages, use the Oracle error tool oerr, by entering the following command at any command line:

oerr code error_number

In the preceding command, code is the type of message, such as ORA and TNS, and error_number is the number associated with the error message.

The following is a list of the most common network error messages:

See Also:

Oracle Database Error Messages for a complete listing of error messages

16.3.1 ORA-03113

Indicates that an error has occurred on the database server.

Message

ORA-03113: End-of-file on communication channel

Cause

An unexpected end of file is processed on the communication channel. This may be an indication that the communications link may have gone down at least temporarily, or it may indicate that the server has gone down.

Action

Check the alert_sid.log file on the server. You may need to modify your retransmission count.

16.3.2 ORA-12154

Indicates that the specified connection alias cannot be resolved.

Message

ORA-12154: Cannot connect to database.
Could not find alias string in string.

For example:

With the LDAP naming adapter:
ORA-12154: Cannot connect to database.
Could not find alias sales in LDAP.
With the TNSNAMES naming adapter:
  • When only one (system or local) tnsnames.ora file is used:
    ORA-12154: Cannot connect to database.
    Could not find alias sales in
        /u01/app/oracle/product/21.3.0/dbhome_1/network/admin/tnsnames.ora.
  • When both the system and local tnsnames.ora files are used:
    ORA-12154: Cannot connect to database.
    Could not find alias sales in
        path_to_file_1, path_to_file_2.
With the TNSNAMES and LDAP naming adapters:
  • When only one (system or local) tnsnames.ora file is used:
    ORA-12154: Cannot connect to database.
    Could not find alias sales in
        /u01/app/oracle/product/21.3.0/dbhome_1/network/admin/tnsnames.ora and LDAP.
  • When both the system and local tnsnames.ora files are used:
    ORA-12154: Cannot connect to database.
    Could not find alias sales in
        path_to_file_1, path_to_file_2 and LDAP.

Cause

A connection to the database or other service is requested using a connection alias, but the specified alias cannot be resolved into a connect descriptor using one of the configured naming methods. For example, if you have used a network service name as the connect identifier, then the network service name cannot be found in a naming method repository or the repository cannot be located.

By default, the client tries all naming methods in an order: starting with local (TNSNAMES), followed by LDAP, and then Easy Connect Plus. A failure to resolve an alias through all of these naming methods returns in an error.

Action

  1. Check for mistakes in the specified connection string.

  2. If your sqlnet.ora file contains the NAMES.DIRECTORY_PATH parameter, then ensure that the parameter contains valid values.

  3. If you are using an alias from the tnsnames.ora file, then perform these steps:
    • Verify that the tnsnames.ora file exists, is in the correct directory, and is accessible. You can find the tnsnames.ora file in any of the following locations:
      • The directory specified by the TNS_ADMIN environment variable, if it is set.

      • The ORACLE_BASE_HOME/network/admin directory. If the file is not present in the ORACLE_BASE_HOME/network/admin directory, then look for the file in ORACLE_HOME/network/admin directory.

    • Ensure that the alias, given in the connect string, exists in one of the tnsnames.ora files.

      This network service name should match the name in the tnsnames.ora file exactly if the name is simple and there is not NAMES_DEFAULT_DOMAIN in the sqlnet.ora file, or the network service name is a fully-qualified name. If the network service name in the connect string is simple, then check the NAMES_DEFAULT_DOMAIN parameter in the sqlnet.ora file. Its value is appended to the network service name given in the connect string. This fully-qualified name should be the entry in the tnsnames.ora file.

    • Ensure that there are no syntax errors anywhere in the tnsnames.ora files. Look for unmatched parentheses or stray characters. Ensure that magic quotes are not used.

    • If you are connecting from a Login dialog box, then verify that you are not placing an at sign (@) before the connect network service name. Activate client tracing, and repeat the operation.

  4. If you are using LDAP directory naming, then perform these steps:
    • Verify that the net service name or database name used as the connect identifier is configured in the directory.

    • Verify that the LDAP directory server is up and accessible.

    • Verify that the default context used is correct by specifying a fully-qualified net service name or a full LDAP DN as the connect identifier.

    • Verify that the ldap.ora file exists and is in the correct location. The following directories are searched for the ldap.ora file in an order:
      • The directory specified by the TNS_ADMIN environment variable.

      • The ORACLE_BASE_HOME/network/admin directory. If the file is not present in the ORACLE_BASE_HOME/network/admin directory, then the file is searched in the ORACLE_HOME/network/admin directory.

      • The directory specified by the LDAP_ADMIN environment variable.

      • The ORACLE_BASE_HOME/network/admin directory for a read-only Oracle home.

      • The ORACLE_HOME/network/admin directory for a read/write Oracle home.

    • Verify that the parameters defined in the ldap.ora file are correct, as follows:
      • The DIRECTORY_SERVERS parameter defines the correct host and port for one or more valid LDAP servers.

      • The DEFAULT_ADMIN_CONTEXT parameter defines the location of the Oracle Context in this directory that should include the network service entry.

      If the ldap.ora file does not exist, then these parameters are resolved using automatic discovery.

    • Verify that the LDAP server host and port are defined in DNS.

    • Verify that the directory has the default Oracle Context defined.

    • Use the ldapsearch utility or a directory administration tool to verify that the network service object exists in the Oracle Context at the location given by the value of the DEFAULT_ADMIN_CONTEXT parameter.

16.3.3 ORA-12170

Indicates that the connection failed with a timeout, such as Transmission Control Protocol (TCP) connect timeout, Outbound connect timeout, or Receive timeout.

Message

ORA-12170: Cannot connect. 
string timeout of string for string.
(CONNECTION_ID=string)

For example:

TCP-level connect timeout:
ORA-12170: Cannot connect. 
TCP connect timeout of 30s for host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)
Outbound connect timeout:
ORA-12170: Cannot connect. 
Outbound connect timeout of 30s for host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)
Receive timeout:
ORA-12170: Cannot connect. 
Receive timeout of 30s for host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

The connection request cannot be completed within the allotted time interval. This may be a result of network or system delays, or may indicate a denial-of-service (DoS) attack on the database server.

Action

  • If the error occurred in your application, then perform these tasks:
    1. If you have used the CONNECT_TIMEOUT or TRANSPORT_CONNECT_TIMEOUT parameters in an Easy Connect or tnsnames.ora connection string, then set these parameters to a larger value.

      Alternatively, set one or all of these parameters in the client sqlnet.ora file to a larger value:
      • SQLNET.OUTBOUND_CONNECT_TIMEOUT

      • SQLNET.RECV_TIMEOUT

      • TCP.CONNECT_TIMEOUT

      The connection string parameters take precedence over the corresponding sqlnet.ora parameters.

    2. In the languages that support programmatic driver settings, adjust the settings equivalent to your specified timeout parameter values.

      For example:

      With JDBC, adjust oracle.net.OUTBOUND_CONNECT_TIMEOUT, oracle.net.CONNECT_TIMEOUT, or use setLoginTimeout().

      With Python, python-oracledb, adjust the tcp_connect_timeout parameter when calling connect() or create_pool().

  • If the error occurred in the database alert log file, then set one or both of these parameters in the database sqlnet.ora file to a larger value:
    • SQLNET.INBOUND_CONNECT_TIMEOUT

    • SQLNET.RECV_TIMEOUT

  • If you suspect a malicious client, then use the database alert log to identify the source address and then restrict the access.

  • Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

16.3.4 ORA-12241

Appears on Microsoft Windows systems to indicate that a particular service is either not available or not running.

Message

ORA-12241: Windows service string is either not available or not running.
For example:
ORA-12241: Windows service OracleServiceSID1 is either not available or not running.

Cause

The operation cannot be completed because the requested Windows service is either not available or not running.

Action

Create and start the Windows service before the operation to be performed.

For further details, turn on tracing and run the operation again. If error persists, contact Oracle Support Services.

16.3.5 ORA-12261

Indicates that the specified connection alias cannot be resolved due to errors in the Easy Connect syntax.

Message

ORA-12261: Cannot connect to database.
Syntax error in Easy Connect connection string string.
For example:
ORA-12261: Cannot connect to database. 
Syntax error in Easy Connect connection string sales1.example.com:1522/sales.

Cause

A connection to the database or other service is requested using an incorrect Easy Connect connection string.

Action

  1. Check for mistakes in the specified connection string.

  2. Ensure that the specified host, port, and service name values are correct.

  3. Try enclosing the connect identifier in quotation marks.

16.3.6 ORA-12262

Indicates that the specified connection alias cannot be resolved due to invalid host name in the Easy Connect syntax.

Message

ORA-12262: Cannot connect to database.
Could not resolve hostname string 
    in Easy Connect connection string string.
For example:
ORA-12262: Cannot connect to database. 
Could not resolve hostname sales1.example.com
    in Easy Connect connection string sales1.example.com:1522/sales.

Cause

A connection to the database or other service is requested using a host name or Easy Connect connection string, but the host name is invalid and cannot be resolved.

Action

  1. Check for mistakes in the specified connection string.

  2. Ensure that the specified host name value is correct.

  3. Try enclosing the connect identifier in quotation marks.

16.3.7 ORA-12500

Indicates that the listener failed to start the Oracle program.

Message

ORA-12500: Listener failed to start a dedicated server process

Cause

Possible reasons include:
  • The maximum number of processes allowed for a single user has exceeded

  • The listener does not have execute permission on the Oracle program

  • The associated Microsoft Windows service is not started

In some cases, these errors may be caused by the same conditions that cause the following errors:
  • TNS-12549 or ORA-12549

  • TNS-00519

  • TNS-12540 or ORA-12540

  • TNS-00510

  • TNS-12560 or ORA-12560

Action

  • Increase the number of processes by setting the PROCESSES parameter in the database initialization file to a larger value.

  • Check the listener.log file for the detailed error stack information.

16.3.8 ORA-12505

Indicates that the listener cannot identify the system identifier (SID) specified in the connect descriptor.

Message

ORA-12505: Cannot connect to database. 
SID string is not registered with the listener at string.
(CONNECTION_ID=string)
For example:
ORA-12505: Cannot connect to database. 
SID sales_sid is not registered with the listener at host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

A listener process initially handles all connections to Oracle Database. The connection request received by the listener specified SID for an instance (usually a database instance) that either has not yet been dynamically registered with the listener or has not been statically configured in the listener's listener.ora configuration file. This error may be a temporary condition that occurs after the listener has started but before the database instance registers with the listener.

Action

  1. Check for mistakes in the specified connection string.

  2. Ensure that the SID parameter in the connection string or that the tnsnames.ora file connect descriptor specifies an instance known by the listener.

  3. Wait a moment, and then try to connect again. The database instance registration may not be complete yet.

  4. Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

  5. Check which instances are currently known by the listener by performing one of these tasks:
    • Ask your database administrator.

    • Review the connection string in the cloud service console.

    • If you have access to the machine where the listener is running, then run one of the following:
      • lsnrctl services

      • If a listener is named in the listener.ora file, then run:
        lsnrctl services listener_name
      • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
        cmctl show services -c cman_name

16.3.9 ORA-12514

Indicates that the listener cannot identify the service requested in the connect descriptor.

Message

ORA-12514: Cannot connect to database. 
Service string is not registered with the listener at string.
(CONNECTION_ID=string)

For example:

When the client connects by specifying the service name:
ORA-12514: Cannot connect to database. 
Service sales_service.example.com is not registered with the listener
  at host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)
When the client connects without specifying the service name:
ORA-12514: Cannot connect to database. 
Service Default is not registered with the listener 
  at host 10.9.7.5 port 1522. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

A listener process initially handles all connections to Oracle Database. The connection request received by the listener specified a service name (usually for a database service) that either has not been dynamically registered with the listener or that has not been statically configured in the listener's listener.ora configuration file. This error may be a temporary condition that occurs after the listener has started but before the database instance registers with the listener.

Action

  1. Check for mistakes in the specified connection string.

  2. Check that the database or pluggable database (PDB) is running. If you are using a cloud service, ensure that the database service is running.

  3. Ensure that the SERVICE_NAME parameter in the connection string or that the tnsnames.ora file connect descriptor specifies a service known by the listener.

  4. If using an Easy Connect connection string, then check that the specified service name is known by the listener.

  5. Wait a moment, and then try to connect again. The database instance registration may not be complete yet.

  6. Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

  7. Check which services are currently known by the listener by performing one of these tasks:
    • Ask your database administrator.

    • Review the connection string in the cloud service console.

    • If you have access to the machine where the listener is running, then run one of the following:
      • lsnrctl services

      • If a listener is named in the listener.ora file, then run:
        lsnrctl services listener_name
      • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
        cmctl show services -c cman_name
      • If an Oracle Global Service Manager (Oracle GSM) listener is named in the gsm.ora file, then run:
        gdsctl services -raw -gsm gsm_name

16.3.10 ORA-12516

Indicates that the listener is unable to find an available handler with the matching protocol stack.

Message

ORA-12516: Cannot connect to database.
Listener at string does not have a protocol handler 
  for string ready or registered for service string.
(CONNECTION_ID=string)
For example:
ORA-12516: Cannot connect to database. 
Listener at host 10.9.7.5 port 1522 does not have protocol handler
  for tcp ready or registered for service sales_service.example.com. 
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

The connection is refused by the Oracle Database listener process. None of the known and available service handlers for the specified service name support the client's requested protocol stack.

Action

  1. Check for mistakes in the specified connection string.

  2. If you are using a cloud service, then review the connection string shown in the cloud service console.

  3. Wait a moment, and then try to connect again. The service handler may be in a blocked state and not accepting new connections.

  4. Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

  5. Check which handlers are currently known by the listener and are accepting connections by performing one of these tasks:
    • Ask your database administrator.

    • Review the connection string in the cloud service console.

    • If you have access to the machine where the listener is running, then run one of the following:
      • lsnrctl services

      • If a listener is named in the listener.ora file, then run:
        lsnrctl services listener_name
      • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
        cmctl show services -c cman_name
      • If an Oracle Global Service Manager (Oracle GSM) listener is named in the gsm.ora file, then run:
        gdsctl services -raw -gsm gsm_name
    • Ensure that the registered handlers are configured to support the required protocol stack. For example, to match the protocol, session, and presentation used in the connection string.

16.3.11 ORA-12520

Indicates that the listener cannot find an available handler for the requested server type.

Message

ORA-12520: Cannot connect to database.
Listener at string does not have handler 
  for string server type
  ready or registered for service string.
(CONNECTION_ID=string)
For example:
ORA-12520: Cannot connect to database. 
Listener at host 10.9.7.5 port 1522 does not have handler
  for pooled server type 
  ready or registered for service sales_service.example.com.
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

The connection is refused by the Oracle Database listener process. None of the known and available handlers for the requested server type (dedicated, shared, or pooled) is appropriate for the client connection.

Action

  1. Check for mistakes in the specified connection string.

  2. Ensure that the SERVER parameter in the connection string or that the tnsnames.ora file connect descriptor specifies a server type (dedicated, shared, or pooled) that is supported by handlers known by the listener.

  3. If using an Easy Connect connection string, then check that the specified server type is supported by handlers known by the listener.

  4. Wait a moment, and then try to connect again. The service handler may be in a blocked state and not accepting new connections.

  5. Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

  6. Check which handlers are currently known by the listener and are accepting connections by performing one of these tasks:
    • Ask your database administrator.

    • Review the connection string shown in the cloud service console.

    • If you have access to the machine where the listener is running, then run one of the following:
      • lsnrctl services

      • If a listener is named in the listener.ora file, then run:
        lsnrctl services listener_name
      • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
        cmctl show services -c cman_name
      • If an Oracle Global Service Manager (Oracle GSM) listener is named in the gsm.ora file, then run:
        gdsctl services -raw -gsm gsm_name

16.3.12 ORA-12521

Indicates that the listener cannot identify the instance requested in the connect descriptor.

Message

ORA-12521: Cannot connect to database.
Instance string for service string
  is not registered with the listener at string.
(CONNECTION_ID=string)
For example:
ORA-12521: Cannot connect to database.
Instance sales_instance for service sales_service.example.com
  is not registered with the listener at host 10.9.7.5 port 1522.
(CONNECTION_ID=1ABcDEabCd1aB+AbCdE1aB==)

Cause

A listener process initially handles all connections to Oracle Database. In addition to the service name, the connection request received by the listener specified an instance name for an instance (usually a database instance) that either has not been dynamically registered with the listener or has not been statically configured in the listener's listener.ora configuration file. This error may be a temporary condition that occurs after the listener has started but before the database instance registers with the listener.

Action

  1. Check for mistakes in the specified connection string.

  2. Ensure that the INSTANCE_NAME parameter in the connection string or that the tnsnames.ora file connect descriptor specifies an instance known by the listener.

  3. If using an Easy Connect connection string, then check that the specified instance name is known by the listener.

  4. Wait a moment, and then try to connect again. The database instance registration may not be complete yet.

  5. Use the CONNECTION_ID value to track this connection attempt in trace files for further diagnosis.

  6. Check which instances are currently known by the listener by performing one of these tasks:
    • Ask your database administrator.

    • Review the connection string in the cloud service console.

    • If you have access to the machine where the listener is running, then run one of the following:
      • lsnrctl services

      • If a listener is named in the listener.ora file, then run:
        lsnrctl services listener_name
      • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
        cmctl show services -c cman_name
      • If an Oracle Global Service Manager (Oracle GSM) listener is named in the gsm.ora file, then run:
        gdsctl services -raw -gsm gsm_name

16.3.13 ORA-12525

Indicates that the client failed to complete its connect request in the time specified by the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file.

Message

ORA-12525: Listener has not received client's request in time allowed

Cause

This error may be a result of network or system delays, or it may indicate that a malicious client is trying to cause a denial-of-service (DoS) attack on the listener.

Action

  • If the error occurred due to system or network delays that are normal for the particular environment, then reconfigure the INBOUND_CONNECT_TIMEOUT_listener_name parameter in listener.ora to a larger value.

  • If you suspect a malicious client, then perform the following steps:
    1. Locate the IP address of the client in the listener.log file to identify the source. Keep in mind that an IP address can be forged.

      For example, the following listener.log file excerpt shows a client IP address of 192.0.2.35.

      03-MAY-2023 16:42:35 * <unknown connect data> *
      (ADDRESS=(PROTOCOL=tcp)(HOST=192.0.2.35)(PORT=53208)) * establish *
      <unknown sid> * 12525
      TNS-12525: TNS:listener has not received client's request in time
      allowed
      TNS-12604: TNS: Application timeout occurred
      
    2. Restrict access to the client. You can configure parameters for access rights in the sqlnet.ora file.

16.3.14 ORA-12533

Indicates that the ADDRESS section parameters are incorrect.

Message

ORA-12533: Illegal address parameters

Cause

This message appears if the protocol specific parameters in the ADDRESS section of the designated connect descriptor are incorrect. This error is often caused by hand-editing of the tnsnames.ora file.

Action

Correct the protocol address in the tnsnames.ora file. Only edit the tnsnames.ora file using Oracle Enterprise Manager Cloud Control or Oracle Net Manager.

16.3.15 ORA-12540 and TNS-00510

Indicate that an internal limit has been exceeded.

Message

ORA-12540: TNS:Internal limit restriction exceeded
TNS-00510: Internal limit restriction exceeded

Cause

Possible limits include:
  • Number of open connections that Oracle Net can process simultaneously

  • Number of memory buffers that can be used simultaneously

  • Number of processes a particular database instance is allowed

The first two are examples of hard limits. The third is an example of a limit which can be increased by setting the PROCESSES parameter in the database initialization file to a larger value. In this case, a TNS-12500 or ORA-12500 error is also returned.

In some cases, these errors can be caused by the same conditions that cause TNS-12549 or ORA-12549, and TNS-00519 errors.

Action

Wait for the open connections to close and retry. If the error persists, then check the sqlnet.log or listener.log file for the detailed error stack information.

16.3.16 ORA-12541

Indicates that the listener cannot be reached.

Message

ORA-12541: Cannot connect. 
No listener at string.

For example:

When using the TCP, TCPS, Exadirect, or Websocket protocol:
ORA-12541: Cannot connect. 
No Listener at host 10.9.7.5 port 1522

In this case, the last tried IP address of the client appears. In case of re-direct, the re-direct IP address appears.

When using the IPC protocol:
ORA-12541: Cannot connect. 
No Listener at key EXTPROC

Cause

The connection request cannot be completed in the following cases:
  • The database listener process is not running on the specified host and port.

  • An Interprocess Communication (IPC) protocol connection is attempted, but there is no listener for the specified key running on the local machine.

The PL/SQL applications using UTL packages can also get this error if the external server process is not listening at the specified address.

Action

  1. If the error displays the host and port that the connection tried to use, then ensure that a listener process is running on that host and is listening on that port. If the message indicates that there is no listener at the specified key, then ensure that the listener is running on the local machine and is listening for the specified key. The listener process is used to initially handle all connections to Oracle Database.

  2. Check for mistakes in the specified connection string.

  3. If you are using an alias from a tnsnames.ora file, then verify the correctness of the host and port.

    Alternatively, verify the correctness of the key if you are using an IPC connection.

  4. If using an Easy Connect connection string, then ensure that the host and port are correct.

  5. Use lsnrctl to check that the listener is running and also verify the port or key that the listener is listening to. To do so, run one of the following:
    • lsnrctl status

    • If a listener is named in the listener.ora file, then run:
      lsnrctl status listener_name
    • If an Oracle Connection Manager (Oracle CMAN) proxy listener is named in the cman.ora file, then run:
      cmctl show status -c cman_name

16.3.17 ORA-12549 and TNS-00519

Indicate that a quota or hard limit imposed by the operating system has been exceeded.

Message

ORA-12549: TNS:Operating system resource quota exceeded
TNS-00519: Operating system resource quota exceeded

Cause

Possible limits include:
  • The maximum number of processes allowed for a single user

  • The operating system is running low on paging space

Action

  • Increase the number of processes by setting the PROCESSES parameter in the database initialization file to a larger value.

  • Check the sqlnet.log or listener.log file for the detailed error stack information, such as an operating system error code to help identify which quota has been exceeded.

16.3.18 ORA-12560

Indicates that a lower-level communication protocol adapter error has occurred.

Message

ORA-12560: Database communication protocol error.

Cause

This error may be due to incorrect configuration of an ADDRESS parameter, or may occur due to errors returned from the underlying protocol or operating system interface.

In some cases, these errors are caused by the same conditions that cause TNS-00510, TNS-00519, TNS-12540, ORA-12540, TNS-12549, or ORA-12549 errors.

Action

  1. Check for lower-level network transport errors in the error stack for additional information.

  2. Ensure that the protocol specification used in the address for the connection is correct.

  3. For further details, turn on network tracing and rerun the operation. Turn off tracing when the operation is complete.

  4. Contact Oracle Support Services.

16.3.19 Directory Naming Errors

Directory naming issues associated with connectivity errors for database service or network service name entries in a directory server require analysis of the data. You can analyze the data contained within a directory server with the ldifwrite command line tool. The ldifwrite tool is an Oracle Internet Directory tool.

The ldifwrite tool can be used to convert all or part of the information residing in a directory server to LDIF. The ldifwrite tool performs a subtree search, including all entries following the specified distinguished name (DN), including the DN itself.

The ldifwrite tool syntax is as follows:

ldifwrite -c net_service_name/database_service -b base_DN -f ldif_file 

The following table lists ldifwrite tool arguments and descriptions for each.

Table 16-8 ldifwrite Arguments

Argument Description

-c net_service_name/database_service

The network service name or database service name that connects to the directory server.

-b base_DN

The base of the subtree to be written out in LDIF format.

-f ldif_file

The output file name.

The following example writes all the directory naming entries under dc=us,dc=example,dc=com to the output1.ldi file:

ldifwrite -c ldap -b "dc=us,dc=example,dc=com" -f output.ldif

Note:

Check the ldap.ora file to determine the base_DN value. It is the same as the DEFAULT_ADMIN_CONTEXT entry in the ldap.ora file.

16.4 Troubleshooting Suggestions for Oracle Net Services

These are the suggestions for diagnosing network problems and troubleshooting Oracle Connection Manager in Traffic Director Mode.

16.4.1 Suggestions for Diagnosing Network Problems

These suggestions may be useful when diagnosing and resolving network connectivity errors.

  • Use the node or network address during configuration instead of the name of the server computer. This eliminates any internal lookup problems and make the connection slightly faster.

  • If you are using TCP/IP addresses, then use the IP address rather than the host name. For example, change the HOST=server_name line in the tnsnames.ora file to the IP address, such as HOST=192.0.2.5.

  • Perform a loopback test on the server as described in Task 2, "Perform a Loopback Test". If the test passes, then use FTP to send the tnsnames.ora and sqlnet.ora files to the client.

  • Check the systems between the client and the server. If it is a wide area network (WAN), then identify any intermediate systems that may not work correctly. If all computers are fine, then the problem may be a timing issue.

  • Verify whether there is a timing issue. Timing issues are associated with an ORA-12535 error in the client log files.

    To resolve a timing issue, try speeding up the connection by using exact addresses instead of names and increase the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file. The default value for this parameter is 10 seconds.

  • Determine which Oracle applications are failing. SQL*Plus may work, but CASE tools may not. If you determine the problem is a data volume issue, then try to transfer a large (5 MB) file with the base connectivity.

16.4.2 Troubleshooting Oracle Connection Manager in Traffic Director Mode

Learn how to resolve errors that you may encounter while executing SELECT statements using Oracle Connection Manager in Traffic Director Mode.

If an application runs a SELECT statement using Oracle Connection Manager in Traffic Director Mode, then the ORA-24449 error message may appear in the following scenarios:

  • If you modify data type or maximum length of a select list column on the database server side while Oracle Connection Manager is running.

    To resolve the error, applications need to close or return the SELECT statements and run the query again.

  • If you select columns with different formats (for example, TO_CHAR(<datecolumn>) with different NLS_DATE_FORMAT values) and modify the session property either in the same connection or with different connections having different format settings, using Proxy Resident Connection Pooling (PRCP).

    To resolve the error, use column aliases to distinguish statements in the same connection. For PRCP connections, use connection classes or tags.

16.4.3 Questions to Consider When Troubleshooting Oracle Net Services

These questions help you in diagnosing network problems.

  • Do all computers have a problem, or is it just one?

    If one computer works and another does not, and the same software (Oracle and third-party products) is installed on each computer, then, if possible, swap out the network cables to see if the problem occurs on the second client. If it does occur, then it indicates that the problem has something to do with the client/server connection and is not local to the client.

  • What kind of connections exist between the client and the server, for example, X.25, ISDN, or leased line?

    Sniffers and LAN analyzers are useful for locating intermittent connection failures, and detecting time outs and resent packets. You can also see which side is waiting for a response.

16.5 Example of Troubleshooting a TNS-12154 Error

This section offers some solutions for the TNS-12154 error. The TNS-12154 error is encountered when SQL*Net cannot find the connect identifier specified for a connection in the tnsnames.ora file or other naming adapter.

Before attempting to resolve the problem, it may be helpful to print out or view the tnsnames.ora file and the sqlnet.ora file. Looking at these files at the same time is helpful because references are made to both.

In this example, the tnsnames.ora and sqlnet.ora files are located in the default network administration directory on the client system.

Be sure that the tnsnames.ora file and the sqlnet.ora file resemble the following examples.

The following is an example of a tnsnames.ora file:

Example 16-1 tnsnames.ora Sample

DEV1.WORLD =
     (DESCRIPTION =
           (ADDRESS =
             (PROTOCOL = TCP)
             (HOST = 192.0.2.56)
             (PORT = 1521)
           )
       (CONNECT_DATA = 
         (SERVICE_NAME = sales.example.com)
       )
     )

The following is an example of a sqlnet.ora file:

Example 16-2 sqlnet.ora Sample

TRACE_LEVEL_CLIENT = OFF
SQLNET.AUTHENTICATION_SERVICES = (NONE)
NAMES.DIRECTORY_PATH = (TNSNAMES)
AUTOMATIC_IPC = OFF

The alias in Example 16-1 is DEV1.WORLD. However, the NAMES.DEFAULT_DOMAIN = WORLD parameter does not exist in Example 16-2. To fix this problem, add the NAMES.DEFAULT_DOMAIN = WORLD parameter anywhere in the sqlnet.ora file. Save the file, and try the connection again.

16.6 Logging Error Information for Oracle Net Services

All errors encountered by Oracle Net Services are appended to a log file for evaluation by a network or database administrator. The log file provides additional information for an administrator about on-screen error messages. The error stack in the log file shows the state of the software at various layers.

To ensure that all errors are recorded, logging cannot be disabled on clients or name servers. Furthermore, only an administrator may replace or erase log files. The log file for the listener includes audit trail information about every client connection request, and most listener control commands.

16.6.1 Oracle Net Error Stacks

Log files provide information contained in an error stack. An error stack refers to the information that is produced by each layer in an Oracle communications stack as the result of a network error.

Table 16-9 Error Stack Components

Error Stack Component Description

NI

Network Interface. This layer provides a generic interface for Oracle clients, servers, or external processes to access Oracle Net functions. The NI layer handles the "break" and "reset" requests for a connection.

NS

Network Session (main and secondary layers). These layers receive requests from NI, and settle all generic computer-level connectivity issues, such as:

  • The location of the server or destination (open, close functions).

  • Whether one or more protocols are involved in the connection (open, close functions).

  • How to handle interrupts between client and server based on the capabilities of each (send, receive functions).

NA

Network Authentication. This layer negotiates authentication and encryption requirements.

NT

Network Transport (main, secondary, and operating system layers). These layers map Oracle Net foundation layer functionality to industry-standard protocols.

16.6.2 Understanding Error Stack Messages

Although the application displays only a one-line error message, an error stack that is much more informative is recorded in the log file by the network layer.

Suppose that a user of a client application tries to establish a connection with the database server using Oracle Net and TCP/IP, by entering the following commands:

SQLPLUS scott@example.com
Enter password: password

When the commands are entered, the following error appears:

ORA-12543: TNS:Unable to connect to destination

This message indicates that the connection to the server failed because the database could not be contacted.

On the client side, the sqlnet.log file contains an error stack corresponding to the ORA-12543 error. As shown in the following example logs, the messages can appear in a concise format (default setting) or in a more detailed long format:

  • Concise format: This format displays all the relevant information in a single line. This helps in reducing the size of the log file and makes it easier to understand.

    The sqlnet.ora setting ENABLE_CONCISE_LOGS=TRUE enables logging in a concise format.

  • Long format: This is the regular longer format that includes multiple lines, with additional details such as Version information.

    The sqlnet.ora setting ENABLE_CONCISE_LOGS=FALSE disables concise logging and prints the message in a long format.

Example 16-3 sqlnet.log File: Concise Format

This log file uses the default, concise format to display the message:

Fatal NI connect error 12514 [Time : 06-AUG-2024 06:33:17] [NS errors [12564:TNS-12564: TNS:connection refused] 0] [NT errors [0 0] 0] [Oracle errors [0 ] 0] [Connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-sever)(PORT=6513))(CONNECT_DATA=(service_name=sales.example.com)(CID=(PROGRAM=oracle)(HOST=sales-server)(USER=scott))(CONNECTION_ID=1abcAB1+ABcabAB1aBCabl2A==)))] [PID: 1122110]

Example 16-4 sqlnet.log File: Long Format

This sample log file uses a longer, detailed format to display the message:

Fatal NI connect error 12514, connecting to:
 (DESCRIPTION=
  (ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=6513))
  (CONNECT_DATA=
    (service_name=sales.oracle,.com)
    (CID=(PROGRAM=ora cle)(HOST=sales-server)(USER=scott))
    (CONNECTION_ID=945VpOeGXR/gU0tBRmTdxw==)))
VERSION INFORMATION:
 TNS for Linux: Version 23.4.0.0.0 - Development
 Oracle Bequeath NT Protocol Adapter for Linux: Version 23.4.0.0.0 - Development
 TCP/IP NT Protocol Adapter for Linux: Version 23.4.0.0.0 - Development
 Version 23.4.0.0.0
 Time: 23-AUG-2024 08:48:02
 Tracing not turned on. Process Id = 2317599
 Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0

16.6.3 Oracle Net Services Log File Names

Each Oracle Net Services component produces its own log file. When using ADR, the default, the log file names are log.xml in the appropriate alert directory.

The following table lists the default log file names and the components that generate the log files that appear in the ADR/diag/instance_name/trace directory.

Table 16-10 Log File Names When Using ADR

Component Log File

Listener

listener.log

Client or database server

sqlnet.log

Oracle Connection Manager listener

instance-name_pid.log

Oracle Connection Manager CMGW (Oracle Connection Manager Gateway) process

instance-name_cmgw_pid.log

Oracle Connection Manager CMADMIN (Oracle Connection Manager Administration) process

instance-name_cmadmin_pid.log

Oracle Connection Manager alert log

instance-name_alert.log

16.6.4 Oracle Network Log File Segmentation

The maximum size and number of text log files can be configured for Oracle Network components such as Oracle Net Listener, Oracle Connection Manager, and Global Service Manager.

This feature allows better management of log files, particularly in Cloud environments. This is an ADR only feature and applicable to both text and XML log files.

16.6.5 About the Logging Parameters

Parameters that control logging, including the type and amount of information logged, and the location where the files are stored, are set in the configuration file of each network component.

Table 16-11 Location of Log Parameters

Network Component Configuration File

Oracle Connection Manager processes

cman.ora

Listener

listener.ora

Client

sqlnet.ora

Database server

sqlnet.ora

Note:

If the ADR_ENABLED parameter is set to ON, then all logging parameters are set by ADR. Using Oracle Net Manager to change the parameters will not work.

16.6.5.1 sqlnet.ora Log Parameters

You can set these log parameters in the sqlnet.ora file.

Table 16-12 sqlnet.ora Log Parameters

sqlnet.ora Parameter Oracle Net Manager Field Description

ADR_BASE

Tracing: ADR Base Directory

Specifies the base directory for storing tracing and logging incidents.

Use this parameter when DIAG_ADR_ENABLED is set to ON.

DIAG_ADR_ENABLED

You must set this parameter manually.

Indicates whether ADR tracing is enabled.

When the DIAG_ADR_ENABLED parameter is set to OFF, non-ADR file tracing is used.

ENABLE_CONCISE_LOGS

You must set this parameter manually.

Enables or disables the logging in a concise format, which displays all the relevant information of a failure in a single line.

LOG_SUPPRESSED_COUNT

You must set this parameter manually.

Controls suppression of a log message on the database server side, based on the number of occurrences.

LOG_SUPPRESSED_TIME

You must set this parameter manually.

Controls suppression of a log message on the database server side, based on the time interval.

LOG_DIRECTORY_CLIENT

Client Information: Log Directory

Specifies the destination directory for the client log file.

By default, the client directory is the current working directory. This parameter is disabled when ADR_ENABLED is set to ON.

LOG_DIRECTORY_SERVER

Server Information: Log Directory

Specifies the destination directory for the database server log files.

By default, the server directory is ORACLE_HOME/network/log. This parameter is disabled when ADR_ENABLED is set to ON.

LOG_FILE_CLIENT

Client Information: Log File

Specifies the name of the log file for the client.

By default, the log name is sqlnet.log.

LOG_FILE_SERVER

You must set this parameter manually.

Specifies the name of the log file for the database server.

By default, the log name is sqlnet.log.

16.6.5.2 listener.ora Log Parameters

You can set these log parameters in the listener.ora file.

Table 16-13 listener.ora Log Parameters

listener.ora Parameter Oracle Net Manager Field Description

ADR_BASE_listener_name

You must set this parameter manually.

The ADR_BASE_listener_name parameter specifies the base directory for storing which tracing and logging incidents.

Use when DIAG_ADR_ENABLED_listener_name is set to ON.

DIAG_ADR_ENABLED_listener_name

You must set this parameter manually.

The DIAG_ADR_ENABLED_listener_name parameter indicates whether ADR tracing is enabled.

When DIAG_ADR_ENABLED_listener_name is set to OFF, non-ADR file tracing is used.

LOG_DIRECTORY_listener_name

LOG_FILE_listener_name

Log File

The destination directory and file for the log file that is automatically generated for listener events. By default the directory is ORACLE_HOME/network/log, and the file name is listener.log. These parameters are disabled when ADR_ENABLED is set to ON.

16.6.5.3 cman.ora Log Parameters

You can set these log parameters in the cman.ora file.

Table 16-14 cman.ora Log Parameters

cman.ora Parameter Description

ADR_BASE

The ADR_BASE parameter specifies the base directory for storing tracing and logging incidents.

Use this parameter when DIAG_ADR_ENABLED is set to ON.

DIAG_ADR_ENABLED

The DIAG_ADR_ENABLED parameter indicates whether ADR tracing is enabled.

When the DIAG_ADR_ENABLED parameter is set to OFF, non-ADR file tracing is used.

EVENT_GROUP

The event groups that are logged. Multiple events may be designated using a comma-delimited list. This parameter accepts the following values:

  • INIT_AND_TERM: initialization and termination

  • MEMORY_OPS: memory operations

  • CONN_HDLG: connection handling

  • PROC_MGMT: process management

  • REG_AND_LOAD: registration and load update

  • WAKE_UP: events related to CMADMIN wakeup queue

  • TIMER: gateway timeouts

  • CMD_PROC: command processing

  • RELAY: events associated with connection control blocks

LOG_DIRECTORY

The destination directory for log files.

By default, the directory is ORACLE_HOME/network/log.

This parameter is disabled when ADR_ENABLED is set to ON.

LOG_LEVEL

The level of logging. Four levels are supported:

  • off (default): no logging

  • user: user log information

  • admin: administrative log information

  • support: Oracle Support Services information

16.6.6 Setting Logging Parameters in Configuration Files

You configure logging parameters for the sqlnet.ora file with Oracle Net Manager and for the listener.ora file with either Oracle Enterprise Manager Cloud Control or Oracle Net Manager.

You must manually configure cman.ora file logging parameters.

16.6.6.1 Setting Parameters for the sqlnet.ora File Using Oracle Net Manager

The following procedure describes how to set the logging parameters in the sqlnet.ora file.

  1. Start Oracle Net Manager.

  2. In the navigator pane, expand Profile under the Local heading.

  3. From the list in the right pane, select General.

  4. Click the Logging tab.

  5. Specify the settings.

  6. Choose Save Network Configuration from the File menu.

The name of the log file is sqlnet.log.

16.6.6.2 Setting Parameters for the listener.ora File Using Oracle Enterprise Manager Cloud Control

The following procedure describes how to set the logging parameters in the listener.ora file using Oracle Enterprise Manager Cloud Control:

  1. Access the Net Services Administration page in Oracle Enterprise Manager Cloud Control.

  2. Select Listeners from the Administer list, and then select the Oracle home that contains the location of the configuration files.

  3. Click Go to display the Listeners page.

  4. Select a listener, and then click Edit to display the Edit Listeners page.

  5. Click the Logging & Tracing tab.

  6. Specify the settings.

  7. Click OK.

The name of the log file is listener.log.

16.6.6.3 Setting Parameters for the listener.ora File Using Oracle Net Manager

The following procedure describes how to set the logging parameters in the listener.ora file using Oracle Net Manager:

  1. Start Oracle Net Manager.

  2. In the navigator pane, expand Listeners under the Local heading.

  3. Select a listener.

  4. From the list in the right pane, select General.

  5. Click the Logging and Tracing tab.

  6. Specify the settings.

  7. Choose Save Network Configuration from the File menu.

The name of the log file is listener.log.

16.6.7 Setting Logging During Control Utilities Runtime

You can set logging during control utility runtime. Setting logging with a control utility does not set parameters in the *.ora files, and the setting is only valid for the control utility session.

The following settings can be set for a control utility:

  • For a listener, use the SET LOG_FILE and SET LOG_DIRECTORY commands from the Listener Control utility.

  • For an Oracle Connection Manager, use the SET LOG_DIRECTORY, SET LOG_LEVEL, and SET EVENT commands from the Oracle Connection Manager control utility.

Note:

If the ADR_ENABLED parameter is set to ON, then all logging parameters are set by ADR. Using Oracle Connection Manager to change the parameters will not work.

16.6.8 Using Log Files

This procedure describes how to use a log file to diagnose a network error.

  1. Review the log file for the most recent error number received from the application. This is usually the last entry in the log file.

  2. Starting from the bottom of the file, locate the first nonzero entry in the error report. This is usually the actual cause.

  3. If that error does not provide the information, then review the next error in the log until you locate the correct error information.

  4. If the cause of the error is still not clear, then turn on tracing and repeat the command that produced the error message.

16.6.9 Analyzing Listener Logs

The listener log file records information about audit trails, service registration-related events, direct hand-off events, subscriptions for Oracle Notification Service (ONS) node-down events, and Oracle Clusterware notifications.

16.6.9.1 Listener Log Audit Trails

The audit trail information in the listener log file enables you to analyze network usage statistics, client connection requests, commands issued by the Listener Control utility, and so on.

16.6.9.1.1 Listener Log Audit Trail Information

The audit trail information comprises statistics about network usage, client connection requests, and commands issued by the Listener Control utility (such as RELOAD, START, STOP, STATUS, or SERVICES).

You can use the audit trail information to view trends and user activity by first storing it in a table and then collating it in a report format. To import the data into a table, use an import utility such as SQL*Loader.

16.6.9.1.2 Format of the Listener Log Audit Trail

This is the format in which audit trail text fields are captured in the listener log file.

Timestamp * Connect Data [* Protocol Info] * Event [* SID | Service] * Return Code

Properties for the audit trail are:

  • Each field is delimited by an asterisk (*).

  • Protocol address information and service name or SID information appear only when a connection is attempted.

  • A successful connection or command returns a code of zero.

  • A failure produces a code that maps to an error message.

Example 16-5 shows a log file excerpt with RELOAD command request.

Example 16-5 Listener Log Event for Successful RELOAD Request

14-OCT-2022 00:29:54 *
(connect_data=(cid=(program=)(host=sales-server)(user=jdoe))(command=reload)
(arguments=64)(service=listener)(version=135290880))
* reload * 0

Example 16-6 shows a log file excerpt with a successful connection request.

Example 16-6 Listener Log Events for a Successful Connection Request

14-OCT-2022 15:28:58 * 
(connect_data=(service_name=sales.us.example.com)(cid=(program=)(host=sales-server)
(user=jdoe))(CONNECTION_ID=abcdefgtx42abCde6V/aB602xAbCDe==))(TARGET_INSTANCE=sales)  
* (address=(protocol=tcp)(host=192.0.2.35)(port=41349)) * establish 
* sales.us.example.com * 0 

Example 16-7 shows a log file excerpt with a successful execution of the STATUS command by host sales-server. It is followed by an unsuccessful connection attempt by a client with an IP address of 192.0.2.35. This connection attempt results in an ORA-12525: Listener Has Not Received Client's Request in Time Allowed error message. This error occurs when a client fails to complete its connection request in the time specified by the INBOUND_CONNECT_TIMEOUT_listener_name parameter in the listener.ora file. This client could be attempting a denial-of-service attack on the listener.

Example 16-7 Listener Log Events for an Unsuccessful Connection Request

03-OCT-2022 16:41:57 * 
(CONNECT_DATA=(CID=(PROGRAM=)(HOST=sales-server)(USER=jdoe))(COMMAND=status)
(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
03-OCT-2022 16:42:35 * <unknown connect data> *
(ADDRESS=(PROTOCOL=tcp)(HOST=192.0.2.35)(PORT=53208)) * establish * 
<unknown sid> * 12525
TNS-12525: TNS:listener has not received client's request in time allowed
TNS-12604: TNS: Application timeout occurred
16.6.9.2 Listener Service Registration Events

The service registration events information in the listener log file enables you to analyze registration-related statistics, such as service names for instances, instance names, service handlers, load information, dynamic listening endpoints, and so on.

16.6.9.2.1 Listener Service Registration Event Information

The service registration information comprises statistics related to database service registration events, such as service_register, service_update, and service_died.

During service registration, the Listener Registration (LREG) process provides the listener with information about:

  • Service names for each running instance of the database

  • Instance names of the database

  • Service handlers (dispatchers or dedicated servers) available for each instance

  • Dispatcher, instance, and node load information

  • Dynamic listening endpoints

Table 16-15 Service Registration Event Log Information

Event Description

service_register

Registration information that the listener receives for an instance.

service_update

Updated registration information that the listener receives for a particular instance, such as dispatcher or instance load information.

These messages also display all the update operations performed during this service_update.

service_died

Lost connection information for the connections that the listener is unable to establish with LREG. All registration information for the instance is discarded. Clients are unable to connect to the instance until LREG registers it again.

16.6.9.2.2 Format of the Listener Service Registration Information

This is the format for each of the service registration event messages captured in the listener log file.

Table 16-16 Service Registration Events Format

Event Format

service_register

Timestamp * Address * Event *  Instance Name * Return Code

service_update

Timestamp * Event * Registration Update Operation * Instance Name * Return Code

service_died

Timestamp * Event *  Instance Name * Return Code

Properties of service registration fields are:

  • Each field is delimited by an asterisk (*).

  • It is normal for the events to appear multiple times in a row for one instance.

  • A successful registration returns a code of zero, meaning the client can connect to the instance.

  • A failure produces a code that maps to an error message.

Example 16-8 shows a log file with service registration events. The listener is able to receive a client request after a successful service_register event, but is unable to receive client requests after a service_died event.

Example 16-8 Listener Log with Service Registration Events

------------------------------- 
01-OCT-2022 11:40:06 * (ADDRESS=(PROTOCOL=tcp)(HOST=192.0.2.35)(PORT=46750)) * service_register * sales * 0
01-OCT-2022 11:40:26 * (connect_data=(service_name=sales.us.example.com)(cid=(program=)(host=sales-server)(user=jdoe)))
* (address=(protocol=tcp)(host=192.0.2.35)(port=41349)) * establish * sales.us.example.com * 0
01-OCT-2022 11:41:51 * service_update * inst_upd=1 handler_upd=2 * sales * 0
01-OCT-2022 11:41:57 * service_update * inst_upd=1 handler_upd=2 * sales * 0
01-OCT-2022 11:42:06 * service_update * inst_upd=1 handler_upd=2 * sales * 0
01-OCT-2022 11:42:08 * (connect_data=(service_name=sales.us.example.com)(cid=(program=)(host=sales-server)(user=jdoe)))
* (address=(protocol=tcp)(host=192.0.2.35)(port=41365)) * establish * sales.us.example.com * 0
01-OCT-2022 11:57:02 * service_died * sales * 12537
01-OCT-2022 11:57:10 * (connect_data=(service_name=sales.us.example.com)(cid=(program=)(host=sales-server)(user=jdoe)))
* (address=(protocol=tcp)(host=192.0.2.35)(port=41406)) * establish * sales.us.example.com * 12514
TNS-12514: TNS:Cannot connect to database. Service sales.us.example.com is not registered with the listener at host 192.0.2.35 port 41365. 
(CONNECTION_ID=4VIdFEpcSe3gU+FoRmR0aA==)
--------------------------------
16.6.9.3 Listener Handler Block Information

The listener handler block information in the listener log file enables you to analyze events about blocked and unblocked handlers.

When a service handler is blocked or unblocked by a database instance or listener, the log message displays blocked or unblocked handler details along with load information in the following format:

Timestamp * Handler Blocked or Unblocked by Instance or Listener: Load Information * Instance Name 

Example 16-9 Listener Log for Handler Block Events

19-OCT-2022 06:13:51 * dedicated handler blocked by instance : load = 79 * sales
19-OCT-2022 06:13:51 * dedicated handler blocked by listener : load = 79 * sales
19-OCT-2022 06:15:05 * dedicated handler unblocked: load = 74 * sales
19-OCT-2022 07:51:13 * dedicated handler blocked by instance * sales
19-OCT-2022 07:51:13 * dedicated handler unblocked by instance * sales
16.6.9.4 Listener Direct Hand-Off Information

The direct hand-off information in the listener log file enables you to analyze direct hand-off events to dispatchers.

These events are formatted into the following fields:

Timestamp * Presentation * Handoff  * Error Code

Properties of direct hand-off fields are as follows:

  • Each field is delimited by an asterisk (*).

  • A successful connection or command returns a code of zero.

  • A failure produces a code that maps to an error message.

The following example shows a direct hand-off event in the log file.

Example 16-10 Listener Log Event for Direct Hand-Off

21-MAY-2012 10:54:55 * oracle.aurora.net.SALESHttp2 * handoff * 0
16.6.9.5 Listener Subscription for ONS Node-Down Event Information

The listener subscribes to the Oracle Notification Service (ONS) node-down event on startup if the ONS configuration file is available. The ONS node-down event information in the listener log file enables you to analyze these messages.

The subscription enables the listener to remove the affected service when it receives node-down event notification from ONS. The listener uses asynchronous subscription for the event notification.

The following warning message is recorded to the listener log file on each STATUS command if the subscription has not completed, such as the ONS daemon is not running on the host.

WARNING: Subscription for node down event still pending 

The listener cannot receive the ONS event while subscription is pending. Other than that, no other listener functionality is affected.

16.6.9.6 Listener Oracle Clusterware Notification Information

If the required Oracle Clusterware libraries are installed and Oracle Clusterware is started on the host, then the listener notifies Oracle Clusterware about its status during start and stop processes. The Oracle Clusterware notification information in the listener log file enables you to analyze these messages.

After a successful notification to Oracle Clusterware (shown as CRS in the following log messages), listeners record the event in the log. No message is recorded if the notification fails.

Listener completed notification to CRS on start
Listener completed notification to CRS on stop

16.6.10 Analyzing Oracle Connection Manager Logs

Oracle Connection Manager (CMAN) generates the cman_alias.log file in the specified log directory. This log file records messages related to the CMAN listener, gateway, CMADMIN processes, and alerts.

The alert log entry is a chronological list of all critical errors. In addition to logging critical errors, it captures information about instance startup and shutdown. It also records values of all configuration parameters at the beginning and end of a session.

Each log entry consists of a timestamp and an event. You can configure the cman.ora file to log events for the following categories:

  • Initialization and termination

  • Memory operations

  • Connection handling

  • Process management

  • Registration and load update

  • Events related to CMADMIN wakeup queue

  • Gateway timeouts

  • Command processing

  • Events associated with connection control blocks

Use the SET EVENT command to specify the type of events that you want to log.

Table 16-17 CMADMIN and Gateway Log Entry Details

Log Entry Event Description

CMADMIN

Failed to get procedure ID

The CMCTL session connected to CMADMIN has disconnected.

CMADMIN

GMON attributes validated

Informational message. The parameters needed for CMADMIN to come up are specified correctly.

CMADMIN

Invalid connect data

An unknown client is trying to connect to CMADMIN. This is most likely a denial of service attack.

CMADMIN

No connect data

An unknown client is trying to connect to CMADMIN. This is most likely a denial of service attack.

Gateway

Connected to monitor

The gateway has connected to CMADMIN.

Gateway

Housekeeping

Informational message. Internal housekeeping for the gateway process is in order. The gateway process is properly connected to the CMADMIN process.

Gateway

Idle timeout

The connection is disconnected because it was idle longer than the time specified in the cman.ora file.

Gateway

Out of connection control block (CCB)

CMADMIN cannot process a connection request. There could be two reasons:

  • Faulty load update between CMADMIN and listener.

  • Someone is trying to connect to CMADMIN directly (possibly a denial of service attack).

Gateway

Session timeout

The connection is disconnected because it exceeded the session timeout specified in the cman.ora file.

Gateway

State change from Empty to Init

State change message from the gateway. After it reaches the Init state, the gateway begins some internal data initialization.

Gateway

State change from Init to Ready

State change message from the gateway. After it reaches the Ready state, the gateway begins accepting connections from the client.

Example 16-11 Sample CMADMIN Log Messages

-------------------------------
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:40)(EVENT=Parameter list)
    (listener_address=(address=(protocol=tcp)(host=sales1)(port=1574)))
    (aso_authentication_filter=OFF)
    (connection_statistics=ON)
    (log_directory=/home/user/network/admin/log)
    (log_level=support)
    (max_connections=256)
    (idle_timeout=5)
    (inbound_connect_timeout=0)
    (session_timeout=20)
    (outbound_connect_timeout=0)
    (max_gateway_processes=1)
    (min_gateway_processes=1)
    (trace_directory=/home/user/network/admin/log)
    (trace_level=off)
    (trace_timestamp=OFF)
    (trace_filelen=0)
    (trace_fileno=0)
)
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:40)(EVENT=Shared Memory Size)
(BYTES=82524))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:40)(EVENT=GMON Attributes validated)
(Type=Information))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:40)(EVENT=NS Listen Successful)
((ADDRESS=(PROTOCOL=tcp)(HOST=sales1)(PORT=1574))))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:44)(EVENT=Received command)
(CMD=version))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:44)(EVENT=Received command)
(CMD=show status))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:44)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:15)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:46)(EVENT=Failed to get procedure id))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:50)(EVENT=Received command)
(CMD=probe monitor))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:50)(EVENT=Received command)
(CMD=shutdown normal))
-------------------------------

Example 16-12 Sample Gateway Log Messages

-------------------------------
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=NS Initialised))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=Memory Allocated)
(BYTES=1024))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=NCR Initialised))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=Connected to Monitor))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=State Change from Empty to 
Init))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=Memory Allocated)
(BYTES=251904))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=Memory Allocated)
(BYTES=2048))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=CCB Initialised))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=Started Listening))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:41)(EVENT=State Change from Init to 
Ready))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:46:47)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:06)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:06)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:07)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:12)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:13)(EVENT=Idle Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:17)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:22)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:25)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:25)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:27)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:30)(EVENT=Idle Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:32)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:37)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:42)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:42)(EVENT=Ready)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:42)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:47)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:52)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:48:57)(EVENT=Housekeeping))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:02)(EVENT=Session Timeout)(CONN NO=0))
(LOG_RECORD=(TIMESTAMP=01-MAY-2024 08:49:02)(EVENT=Housekeeping))
-------------------------------

16.7 Tracing Error Information for Oracle Net Services

Tracing produces a detailed sequence of statements that describe network events as they are run. Tracing an operation enables you to obtain more information about the internal operations of the components of Oracle Net Services than is provided in a log file.

This information is output to files that can be evaluated to identify the events that led to an error.

Note:

Tracing uses a large amount of disk space and may have a significant impact upon system performance. Therefore, you should enable tracing only when necessary.

16.7.1 Understanding Oracle Net Services Trace File Names

Each Oracle Net Services component produces its own trace file. Table 16-18 provides the default trace file names and lists the components that generate the trace files.

Table 16-18 Trace Files Names

Trace File Component

instance-name_pid.trc

Oracle Connection Manager listener

instance-name_cmgw_pid.trc

Oracle Connection Manager CMGW process

instance-name_cmadmin_pid.trc

Oracle Connection Manager CMADMIN process

listener.trc

Listener

sqlnet.trc

Client

svr_pid.trc

Database server

tnsping.trc

TNSPING utility

16.7.2 Setting Tracing Parameters

Parameters that control tracing, including the type and amount of information trace, and the location where the files are stored, are set in the configuration file of each network component as described in Table 16-19.

Table 16-19 Location of Trace Parameters

Configuration File Component

cman.ora

Oracle Connection Manager processes

listener.ora

Listener

sqlnet.ora

Client

Database server

TNSPING utility

This section contains the following topics:

See Also:

Oracle Database Net Services Reference for additional information about these parameters
16.7.2.1 cman.ora Trace Parameters

Review the trace parameter settings for Oracle Connection Manager that can be set in the cman.ora file.

Table 16-20 cman.ora Trace Parameters

cman.ora Parameter Description

TRACE_DIRECTORY

The destination directory for trace files.

By default, the directory is ORACLE_HOME/network/trace.

TRACE_FILELEN

The size of the trace file in KB. When the size is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO parameter.

TRACE_FILENO

The number of trace files for tracing. When this parameter is set along with the TRACE_FILELEN parameter, trace files are used in a cyclical fashion. The first file is filled, then the second file, and so on. When the last file has been filled, the first file is reused, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if this parameter is set to 3, then the Oracle Connection Manager trace files for the gateway processes would be named instance-name_cmgw1_pid.trc, instance-name_cmgw2_pid.trc and instance-name_cmgw3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

TRACE_LEVEL

The level of detail the trace facility records for the listener. Specify one of the following trace level values:

  • off (equivalent to 0) provides no tracing.

  • user (equivalent to 4) traces to identify user-induced error conditions.

  • admin (equivalent to 10) traces to identify installation-specific problems.

  • support (equivalent to 16) provides trace information for troubleshooting by Oracle Support Services.

The Oracle Connection Manager listener, gateway, and CMADMIN processes create trace files on both Linux and Microsoft Windows.

TRACE_TIMESTAMP

If the TRACING parameter is enabled, then a time stamp in the form of dd-mon-yyyy hh:mi:ss:mil is created for every trace event in the listener trace file.

16.7.2.2 listener.ora Trace Parameters

Review the trace parameter settings for the listener that can be set in the listener.ora file.

Table 16-21 listener.ora Trace Parameters

listener.ora Parameter Oracle Enterprise Manager Cloud Control/Oracle Net Manager Field Description

TRACE_LEVEL_listener_name

Select a trace level/Trace Level

The level of detail the trace facility records for the listener. The trace level value can either be a value within the range of 0 (zero) to 16 where 0 is no tracing and 16 represents the maximum amount of tracing or one of the following values:

  • off (equivalent to 0) provides no tracing.

  • user (equivalent to 4) traces to identify user-induced error conditions.

  • admin (equivalent to 6) traces to identify installation-specific problems.

  • support (equivalent to 16) provides trace information for troubleshooting by Oracle Support Services.

TRACE_DIRECTORY_listener_name

TRACE_FILE_listener_name

Trace File

The destination directory and file for the trace file. By default, the directory is ORACLE_HOME/network/trace, and the file name is listener.trc.

TRACE_FILEAGE_listener_name

You must set this parameter manually.

The maximum age of listener trace files in minutes. When the age limit is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_listener_name parameter.

TRACE_FILEAGE_SERVER

You must set this parameter manually.

Specifies the maximum age of server trace files in minutes. When the age limit is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_SERVER parameter.

TRACE_FILELEN_listener_name

You must set this parameter manually.

The size of the listener trace files in KB. When the size is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_listener_name parameter

TRACE_FILENO_listener_name

You must set this parameter manually.

The number of trace files for listener tracing. When this parameter is set along with the TRACE_FILELEN_listener_name parameter, trace files are used in a cyclical fashion. The first file is filled, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of listener.trc is used, and this parameter is set to 3, then the trace files would be named listener1.trc, listener2.trc and listener3.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

When this parameter is set with the TRACE_FILEAGE_listener_name parameter, trace files are cycled based on the age of the trace file. The first file is used until the age limit is reached, then the second file is use, and so on. When the last file's age limit is reached, the first file is re-used, and so on.

When this parameter is set with both the TRACE_FILELEN_listener_name and TRACE_FILEAGE_listener_name parameters, trace files are cycled when either the size limit or the age limit is reached.

TRACE_TIMESTAMP_listener_name

You must set this parameter manually.

A time stamp in the form of dd-mon-yyyy hh:mi:ss:mil for every trace event in the listener trace file.

16.7.2.3 sqlnet.ora Trace Parameters

Review the trace parameter settings that can be set in the sqlnet.ora file.

Table 16-22 sqlnet.ora Trace Parameters

sqlnet.ora Parameter Oracle Net Manager Field Description

TRACE_DIRECTORY_CLIENT

Client Information: Trace Directory

The destination directory for the client trace output. By default, the client directory is ORACLE_HOME/network/trace.

TRACE_DIRECTORY_SERVER

Server Information: Trace Directory

The destination directory for the database server trace output. By default, the server directory is ORACLE_HOME/network/trace.

TRACE_FILE_CLIENT

Client Information: Trace File

The name of the trace file for the client. By default, the trace file name is sqlnet.trc.

TRACE_FILE_SERVER

Server Information: Trace File

The name of the trace file for the database server. By default the trace file name is svr_pid.trc.

TRACE_FILEAGE_CLIENT

You must set this parameter manually.

Specifies the maximum age of client trace files in minutes. When the age limit is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_CLIENT parameter.

TRACE_FILEAGE_SERVER

You must set this parameter manually.

Specifies the maximum age of server trace files in minutes. When the age limit is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_SERVER parameter.

TRACE_FILELEN_CLIENT

You must set this parameter manually.

The size of the client trace files in KB. When the size is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_CLIENT parameter.

TRACE_FILELEN_SERVER

You must set this parameter manually.

The size of the database server trace files in KB. When the size is reached, the trace information is written to the next file. The number of files is specified with the TRACE_FILENO_SERVER parameter.

TRACE_FILENO_CLIENT

You must set this parameter manually.

The number of trace files for client tracing. When this parameter is set along with the TRACE_FILELEN_CLIENT parameter, trace files are used in a cyclical fashion. The first file is filled, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of sqlnet.trc is used, and this parameter is set to 3, then the trace files would be named sqlnet1_pid.trc, sqlnet2_pid.trc and sqlnet3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

When this parameter is set with the TRACE_FILEAGE_CLIENT parameter, trace files are cycled based on the age of the trace file. The first file is used until the age limit is reached, then the second file is use, and so on. When the last file's age limit is reached, the first file is re-used, and so on.

When this parameter is set with both the TRACE_FILELEN_CLIENT and TRACE_FILEAGE_CLIENT parameters, trace files are cycled when either the size limit or age limit is reached.

TRACE_FILENO_SERVER

You must set this parameter manually.

The number of trace files for database server tracing. When this parameter is set along with the TRACE_FILELEN_SERVER parameter, trace files are used in a cyclical fashion. The first file is filled, then the second file, and so on. When the last file has been filled, the first file is re-used, and so on.

The trace file names are distinguished from one another by their sequence number. For example, if the default trace file of svr_pid.trc is used, and this parameter is set to 3, then the trace files would be named svr1_pid.trc, svr2_pid.trc and svr3_pid.trc.

In addition, trace events in the trace files are preceded by the sequence number of the file.

When this parameter is set with the TRACE_FILEAGE_SERVER parameter, trace files are cycled based on the age of the trace file. The first file is used until the age limit is reached, then the second file is use, and so on. When the last file's age limit is reached, the first file is re-used, and so on.

When this parameter is set with both the TRACE_FILELEN_SERVER and TRACE_FILEAGE_SERVER parameters, trace files are cycled when either the size limit or age limit is reached.

TRACE_LEVEL_CLIENT

Client Information: Trace Level

The level of detail the trace facility records for the client.

The trace level value can either be a value within the range of 0 (zero) to 16 where 0 is no tracing and 16 represents the maximum amount of tracing or one of the following values:

  • off (equivalent to 0) provides no tracing.

  • user (equivalent to 4) traces to identify user-induced error conditions.

  • admin (equivalent to 6) traces to identify installation-specific problems.

  • support (equivalent to 16) provides trace information for troubleshooting by Oracle Support Services.

TRACE_LEVEL_SERVER

Server Information: Trace Level

The level of detail the trace facility records for the database server. The trace level value can either be a value within the range of 0 (zero) to 16 where 0 is no tracing and 16 represents the maximum amount of tracing or one of the following values:

  • off (equivalent to 0) provides no tracing.

  • user (equivalent to 4) traces to identify user-induced error conditions.

  • admin (equivalent to 6) traces to identify installation-specific problems.

  • support (equivalent to 16) provides trace information for troubleshooting by Oracle Support Services.

TRACE_TIMESTAMP_CLIENT

You must set this parameter manually.

A time stamp in the form of dd-mon-yyyy hh:mi:ss:mil for every trace event in the client trace file, sqlnet.trc.

TRACE_TIMESTAMP_SERVER

You must set this parameter manually.

A time stamp in the form of dd-mon-yyyy hh:mi:ss:mil for every trace event in the client trace file, sqlnet.trc.

TRACE_UNIQUE_CLIENT

Client Information: Unique Trace File Name

When the value is set to on, Oracle Net creates a unique file name for each trace session by appending a process identifier to the name of each trace file generated, and enabling several files to coexist. For example, trace files named sqlnetpid.trc are created if default trace file name sqlnet.trc is used. When the value is set to off, data from a new client trace session overwrites the existing file.

You can manually add the TNSPING utility tracing parameters described in Table 16-23 to the sqlnet.ora file. The TNSPING utility determines whether a service, such as a database or other TNS services on an Oracle Net network can be successfully reached.

Table 16-23 TNSPING Trace Parameters

sqlnet.ora Parameter Description

TNSPING.TRACE_DIRECTORY

The destination directory for TNSPING trace file, tnsping.trc. By default, the directory is ORACLE_HOME/network/trace.

TNSPING.TRACE_LEVEL

The level of detail the trace facility records for the TNSPING utility. The trace level value can either be a value within the range of 0 (zero) to 16 where 0 is no tracing and 16 represents the maximum amount of tracing or one of the following values:

  • off (equivalent to 0) provides no tracing.

  • user (equivalent to 4) traces to identify user-induced error conditions.

  • admin (equivalent to 6) traces to identify installation-specific problems.

  • support (equivalent to 16) provides trace information for troubleshooting by Oracle Support Services.

16.7.2.4 Setting Tracing Parameters in Configuration Files

Configure tracing parameters for the sqlnet.ora file with Oracle Net Manager and listener.ora file with either Oracle Enterprise Manager Cloud Control or Oracle Net Manager. You must manually configure cman.ora file tracing parameters.

16.7.2.4.1 Setting Tracing Parameters for sqlnet.ora File Using Oracle Net Manager

The following procedure describes how to set the tracing parameters for the sqlnet.ora file using Oracle Net Manager:

  1. Start Oracle Net Manager.

  2. In the navigator pane, expand Profile under the Local heading.

  3. From the list in the right pane, select General.

  4. Click the Tracing tab.

  5. Specify the settings.

  6. Choose Save Network Configuration from the File menu.

The name of the trace file for the client is sqlnet.trc. The name of the trace file for the server is svr_pid.trc.

16.7.2.4.2 Setting Tracing Parameters for the Listener Using Oracle Enterprise Manager Cloud Control

The following procedure describes how to set the tracing parameters for the listener using Oracle Enterprise Manager Cloud Control:

  1. Access the Net Services Administration page in Oracle Enterprise Manager Cloud Control.

  2. Select Listeners from the Administer list, and then select the Oracle home that contains the location of the configuration files.

  3. Click Go to display the Listeners page.

  4. Select a listener, and then click Edit to display the Edit Listeners page.

  5. Click the Logging & Tracing tab.

  6. Specify the settings.

  7. Click OK.

The name of the trace file is listener.trc.

16.7.2.4.3 Setting Tracing Parameters for the Listener Using Oracle Net Manager

The following procedure describes how to set the tracing parameters for the listener using Oracle Net Manager:

  1. Start Oracle Net Manager.

  2. In the navigator pane, expand Listeners from the Local heading.

  3. Select a listener.

  4. From the list in the right pane, select General.

  5. Click the Logging and Tracing tab.

  6. Specify the settings.

  7. Choose Save Network Configuration from the File menu.

16.7.3 Setting Tracing During Control Utilities Runtime

You can set tracing during control utility runtime. Setting tracing with a control utility does not set parameters in the *.ora files. The setting is only valid for the session of the control utility:

  • For the listener, use the SET TRC_DIRECTORY, SET TRC_FILE, and SET TRC_LEVEL commands from the Listener Control utility.

  • For Oracle Connection Manager, use the SET TRACE_DIRECTORY and SET TRACE_LEVEL, and SET TRACE_TIMESTAMP commands from the Oracle Connection Manager control utility.

16.7.4 Evaluating Oracle Net Services Trace Files

Trace files can help Oracle Support Services diagnose and troubleshoot network problems. This section explains how to perform basic analysis of trace files.

16.7.4.1 Flow of Data Packets Between Network Nodes

Oracle Net performs its functions by sending and receiving data packets. You can view the actual contents of the Oracle Net packet in your trace file by specifying a trace level of support. The order of the packet types sent and received help to determine how the connection was established.

16.7.4.2 Oracle Net Data Packet Formats

Each line in the trace file begins with a procedure followed by a message. Following each procedure is a line of hexadecimal data representing actual data. The actual data that flows inside the packet is sometimes viewable to the right of the hexadecimal data.

Each packet has a keyword that denotes the packet type. All packet types begin with the prefix "nsp". This is helpful when reviewing trace files for specific packet information. The following keywords are used in a trace file:

  • NSPTCN: Used with connect packet types.

  • NSPTAC: Used with accept packet types.

  • NSPTRF: Used with refuse packet types.

  • NSPTRS: Used with resend packet types.

  • NSPTDA: Used with data packet types.

  • NSPCNL: Used with control packet types.

  • NSPTMK: Used with marker packet types.

Example 16-13 shows typical packet information. In the example, the nscon procedure sends an NSPTCN packet over the network.

Example 16-13 Packet Information

nscon: entry
nscon: doing connect handshake...
nscon: sending NSPTCN packet
nspsend: entry
nspsend: plen=187, type=1
nspsend: 187 bytes to transport
nspsend:packet dump
nspsend:00 BB 00 00 01 00 00 00  |........|
nspsend:01 33 01 2C 0C 01 08 00  |.3.,....|
nspsend:7F FF 7F 08 00 00 00 01  |........|
nspsend:00 99 00 22 00 00 08 00  |..."....|
nspsend:01 01 28 44 45 53 43 52  |..(DESCR|
nspsend:49 50 54 49 4F 4E 3D 28  |IPTION=(|
nspsend:43 4F 4E 4E 45 43 54 5F  |CONNECT_|
nspsend:44 41 54 41 3D 28 53 49  |DATA=(SI|
nspsend:44 3D 61 70 33 34 37 64  |D=ap347d|
nspsend:62 31 29 28 43 49 44 3D  |b1)(CID=|
nspsend:28 50 52 4F 47 52 41 4D  |(PROGRAM|
nspsend:3D 29 28 48 4F 53 54 3D  |=)(HOST=|
nspsend:61 70 32 30 37 73 75 6E  |sales-12|
nspsend:29 28 55 53 45 52 3D 6D  |)(USER=m|
nspsend:77 61 72 72 65 6E 29 29  |scott))|
nspsend:29 28 41 44 44 52 45 53  |)(ADDRES|
nspsend:53 5F 4C 49 53 54 3D 28  |S_LIST=(|
nspsend:41 44 44 52 45 53 53 3D  |ADDRESS=|
nspsend:28 50 52 4F 54 4F 43 4F  |(PROTOCO|
nspsend:4C 3D 74 63 70 29 28 48  |L=tcp)(H|
nspsend:4F 53 54 3D 61 70 33 34  |OST=sale|
nspsend:37 73 75 6E 29 28 50 4F  |s-12)(PO|
nspsend:52 54 3D 31 35 32 31 29  |RT=1521)|
nspsend:29 29 29 00 00 00 00 00  |))).....|
nspsend: normal exit
nscon: exit (0)
16.7.4.3 Pertinent Oracle Net Trace Error Output

When there is a problem, the error code is logged to the trace file. This example illustrates a typical trace file output for a failed SQL*Plus connection to the database server.

The error message and error stack are shown in bold.

Example 16-14 Sample Trace File Output

[22-MAY-2022 13:34:07:687] nsprecv: entry
[22-MAY-2022 13:34:07:687] nsbal: entry
[22-MAY-2022 13:34:07:687] nsbgetfl: entry
[22-MAY-2022 13:34:07:687] nsbgetfl: normal exit
[22-MAY-2022 13:34:07:687] nsmal: entry
[22-MAY-2022 13:34:07:687] nsmal: 44 bytes at 0x132d90
[22-MAY-2022 13:34:07:687] nsmal: normal exit
[22-MAY-2022 13:34:07:687] nsbal: normal exit
[22-MAY-2022 13:34:07:687] nsprecv: reading from transport...
[22-MAY-2022 13:34:07:687] nttrd: entry
[22-MAY-2022 13:35:09:625] nttrd: exit
[22-MAY-2022 13:35:09:625] ntt2err: entry
[22-MAY-2022 13:35:09:625] ntt2err: Read unexpected EOF ERROR on 10
[22-MAY-2022 13:35:09:625] ntt2err: exit
[22-MAY-2022 13:35:09:625] nsprecv: transport read error
[22-MAY-2022 13:35:09:625] nsprecv: error exit
[22-MAY-2022 13:35:09:625] nserror: entry
[22-MAY-2022 13:35:09:625] nserror: nsres: id=0, op=68, ns=12537, ns2=12560;
nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[22-MAY-2022 13:35:09:625] nscon: error exit
[22-MAY-2022 13:35:09:625] nsdo: nsctxrnk=0
[22-MAY-2022 13:35:09:625] nsdo: error exit
[22-MAY-2022 13:35:09:625] nscall: unexpected response
[22-MAY-2022 13:35:09:625] nsclose: entry
[22-MAY-2022 13:35:09:625] nstimarmed: entry
[22-MAY-2022 13:35:09:625] nstimarmed: no timer allocated
[22-MAY-2022 13:35:09:625] nstimarmed: normal exit
[22-MAY-2022 13:35:09:625] nsdo: entry
[22-MAY-2022 13:35:09:625] nsdo: cid=0, opcode=98, *bl=0, *what=0,
uflgs=0x440, cflgs=0x2
[22-MAY-2022 13:35:09:625] nsdo: rank=64, nsctxrnk=0
[22-MAY-2022 13:35:09:625] nsdo: nsctx: state=1, flg=0x4201, mvd=0
[22-MAY-2022 13:35:09:625] nsbfr: entry
[22-MAY-2022 13:35:09:625] nsbaddfl: entry
[22-MAY-2022 13:35:09:625] nsbaddfl: normal exit
[22-MAY-2022 13:35:09:625] nsbfr: normal exit
[22-MAY-2022 13:35:09:625] nsbfr: entry
[22-MAY-2022 13:35:09:625] nsbaddfl: entry
[22-MAY-2022 13:35:09:625] nsbaddfl: normal exit
[22-MAY-2022 13:35:09:625] nsbfr: normal exit
[22-MAY-2022 13:35:09:625] nsdo: nsctxrnk=0
[22-MAY-2022 13:35:09:625] nsdo: normal exit
[22-MAY-2022 13:35:09:625] nsclose: closing transport
[22-MAY-2022 13:35:09:625] nttdisc: entry
[22-MAY-2022 13:35:09:625] nttdisc: Closed socket 10
[22-MAY-2022 13:35:09:625] nttdisc: exit
[22-MAY-2022 13:35:09:625] nsclose: global context check-out (from slot 0)
complete
[22-MAY-2022 13:35:09:703] nsnadisc: entry
[22-MAY-2022 13:35:09:703] nadisc: entry
[22-MAY-2022 13:35:09:703] nacomtm: entry
[22-MAY-2022 13:35:09:703] nacompd: entry
[22-MAY-2022 13:35:09:703] nacompd: exit
[22-MAY-2022 13:35:09:703] nacompd: entry
[22-MAY-2022 13:35:09:703] nacompd: exit
[22-MAY-2022 13:35:09:703] nacomtm: exit
[22-MAY-2022 13:35:09:703] nas_dis: entry
[22-MAY-2022 13:35:09:703] nas_dis: exit
[22-MAY-2022 13:35:09:703] nau_dis: entry
[22-MAY-2022 13:35:09:703] nau_dis: exit
[22-MAY-2022 13:35:09:703] naeetrm: entry
[22-MAY-2022 13:35:09:703] naeetrm: exit
[22-MAY-2022 13:35:09:703] naectrm: entry
[22-MAY-2022 13:35:09:703] naectrm: exit
[22-MAY-2022 13:35:09:703] nagbltrm: entry
[22-MAY-2022 13:35:09:703] nau_gtm: entry
[22-MAY-2022 13:35:09:703] nau_gtm: exit
[22-MAY-2022 13:35:09:703] nagbltrm: exit
[22-MAY-2022 13:35:09:703] nadisc: exit
[22-MAY-2022 13:35:09:703] nsnadisc: normal exit
[22-MAY-2022 13:35:09:703] nsbfr: entry
[22-MAY-2022 13:35:09:703] nsbaddfl: entry
[22-MAY-2022 13:35:09:703] nsbaddfl: normal exit
[22-MAY-2022 13:35:09:703] nsbfr: normal exit
[22-MAY-2022 13:35:09:703] nsmfr: entry
[22-MAY-2022 13:35:09:703] nsmfr: 2256 bytes at 0x130508
[22-MAY-2022 13:35:09:703] nsmfr: normal exit
[22-MAY-2022 13:35:09:703] nsmfr: entry
[22-MAY-2022 13:35:09:703] nsmfr: 484 bytes at 0x1398a8
[22-MAY-2022 13:35:09:703] nsmfr: normal exit
[22-MAY-2022 13:35:09:703] nsclose: normal exit
[22-MAY-2022 13:35:09:703] nscall: connecting...
[22-MAY-2022 13:35:09:703] nsclose: entry
[22-MAY-2022 13:35:09:703] nsclose: normal exit
[22-MAY-2022 13:35:09:703] nladget: entry
[22-MAY-2022 13:35:09:734] nladget: exit
[22-MAY-2022 13:35:09:734] nsmfr: entry
[22-MAY-2022 13:35:09:734] nsmfr: 144 bytes at 0x132cf8
[22-MAY-2022 13:35:09:734] nsmfr: normal exit
[22-MAY-2022 13:35:09:734] nsmfr: entry
[22-MAY-2022 13:35:09:734] nsmfr: 156 bytes at 0x138e70
[22-MAY-2022 13:35:09:734] nsmfr: normal exit
[22-MAY-2022 13:35:09:734] nladtrm: entry
[22-MAY-2022 13:35:09:734] nladtrm: exit
[22-MAY-2022 13:35:09:734] nscall: error exit
[22-MAY-2022 13:35:09:734] nioqper:  error from nscall
[22-MAY-2022 13:35:09:734] nioqper:    ns main err code: 12537
[22-MAY-2022 13:35:09:734] nioqper:    ns (2)  err code: 12560
[22-MAY-2022 13:35:09:734] nioqper:    nt main err code: 507
[22-MAY-2022 13:35:09:734] nioqper:    nt (2)  err code: 0
[22-MAY-2022 13:35:09:734] nioqper:    nt OS   err code: 0
[22-MAY-2022 13:35:09:734] niomapnserror: entry
[22-MAY-2022 13:35:09:734] niqme: entry
[22-MAY-2022 13:35:09:734] niqme: reporting NS-12537 error as ORA-12537
[22-MAY-2022 13:35:09:734] niqme: exit
[22-MAY-2022 13:35:09:734] niomapnserror: returning error 12537
[22-MAY-2022 13:35:09:734] niomapnserror: exit
[22-MAY-2022 13:35:09:734] niotns: Couldn't connect, returning 12537
[22-MAY-2022 13:35:10:734] niotns: exit
[22-MAY-2022 13:35:10:734] nsbfrfl: entry
[22-MAY-2022 13:35:10:734] nsbrfr: entry
[22-MAY-2022 13:35:10:734] nsbrfr: nsbfs at 0x132d90, data at 0x132dc8.
[22-MAY-2022 13:35:10:734] nsbrfr: normal exit
[22-MAY-2022 13:35:10:734] nsbrfr: entry
[22-MAY-2022 13:35:10:734] nsbrfr: nsbfs at 0x1248d8, data at 0x132210.
[22-MAY-2022 13:35:10:734] nsbrfr: normal exit
[22-MAY-2022 13:35:10:734] nsbrfr: entry
[22-MAY-2022 13:35:10:734] nsbrfr: nsbfs at 0x12d820, data at 0x1319f0.
[22-MAY-2022 13:35:10:734] nsbrfr: normal exit
[22-MAY-2022 13:35:10:734] nsbfrfl: normal exit
[22-MAY-2022 13:35:10:734] nigtrm: Count in the NI global area is now 1
[22-MAY-2022 13:35:10:734] nigtrm: Count in the NL global area is now 1

Note:

An operating system error code appears in the error stack. Each operating system has its own error codes, refer to your system documentation for information about operating system error codes.

The most efficient way to evaluate error codes is to find the most recent nserror entry logged, as the session layer controls the connection. The most important error messages are the ones at the bottom of the file. They are the most recent errors and the source of the problem with the connection.

For information about the specific return codes, use the Oracle error tool oerr, by entering the following at any command line:
oerr tns error_number

As an example, consider the following nserror entry logged in the trace file shown in Example 16-14:

[22-MAY-2022 13:35:09:625] nserror: nsres: id=0, op=68, ns=12537, ns2=12560;
nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0

In the preceding example, the main TNS error is 12537, and its secondary error is 12560. The protocol adapter error is 507. Using oerr, you can find out more information about return codes 12537, 12560, and 507. User input is shown in bold in the following examples.

oerr tns 12537
12537, 00000, "TNS:connection closed"
// *Cause: "End of file" condition has been reached; partner has disconnected.
// *Action: None needed; this is an information message.

oerr tns 12560
12560, 00000, "TNS:Database communication protocol error."
// *Cause:  A lower level communication protocol adapter error occurred.
// *Action: 
//    - Check for lower level network transport errors in the error stack
//      for additional information.
//    - Ensure the protocol specification used in the address for the
//      connection is correct.
//    - For further details, turn on network tracing and rerun the
//      operation. Turn off tracing when the operation is complete.
//    - Contact Oracle Support.

oerr tns 507
00507, 00000, "Connection closed"
// *Cause: Normal "end of file" condition has been reached; partner has
//  disconnected.
// *Action: None needed; this is an information message.

16.7.5 Using the Trace Assistant to Examine Trace Files

Oracle Net Services provides a tool called the Trace Assistant to help understand the information provided in trace files by converting existing lines of trace file text into a more readable paragraph. The Trace Assistant works only with level 16 (support) Oracle Net Services trace files.

Note:

The Trace Assistant can only be used when the DIAG_ADR_ENABLED parameter is set to off. See "Understanding Automatic Diagnostic Repository".

16.7.5.1 Trace Assistant Syntax

To run the Trace Assistant, enter the trcasst command at the command line.

trcasst [options] filename

Table 16-24 Trace Assistant Syntax Options

Option Description

-elevel

Displays error information. After the -e, use 0, 1, or 2 error decoding level may follow:

  • 0 or nothing translates the NS error numbers dumped from the nserror function plus lists all other errors

  • 1 displays only the NS error translation from the nserror function

  • 2 displays error numbers without translation

-la

If a connection ID exists in the NS connect packet, then the output displays the connection IDs. Connection IDs are displayed as hexadecimal, eight-byte IDs. A generated ID is created by Trace Assistant if the packet is not associated with any connection, that is, the connect packet is overwritten in the trace file. This can occur with cyclic trace files.

For each ID, the output lists the following:

  • Socket ID, if the connection has one.

  • Connect packet send or receive operation.

  • Current setting of the MULTIPLEX attribute of the DISPATCHERS parameter in the initialization parameter file. When MULTIPLEX is set to ON, session multiplexing is enabled.

  • Session ID, if MULTIPLEX is set to ON.

  • Connect data information.

Notes:

  • Do not use this option with other options.

  • The IDs generated by the Trace Assistant do not correlate with client/server trace files.

-li ID

Displays the trace for a particular ID from the -la output

Note: Only use this option with output from the -la option.

-otype

Displays the amount and type of information to be output. After the -o the following options can be used:

  • c to display summary connectivity information.

  • d to display detailed connectivity information.

  • u to display summary Two-Task Common (TTC) information.

  • t to display detailed TTC information.

  • q to display SQL commands enhancing summary TTC information. Use this option with u, such as -ouq.

Note: As output for d contains the same information as displayed for c, do not submit both c and d. If you submit both, then only output d is processed.

-s

Displays the following statistical information:

  • Total number of bytes sent and received.

  • Maximum open cursors.

  • Currently open cursors.

  • Count and ratio of operations.

  • Parsing and execution count for PL/SQL.

  • Total calls sent and received.

  • Total, average, and maximum number of bytes sent and received.

  • Total number of transports and sessions present.

  • Timestamp information, if any.

  • Sequence numbers, if any.

If no options are provided, then the default is -odt -e0 -s, which provides detailed connectivity and TTC events, error level zero (0), and statistics in the trace file.

The following example shows how the Trace Assistant converts the trace file information into a more readable format using the -e1 option.

Example 16-15 trcasst -e1 Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

ntus2err: exit 
ntuscni: exit 
ntusconn: exit 
nserror: entry 
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0 
/////////////////////////////////////////////////////////////// 
Error found. Error Stack follows: 
              id:0 
  Operation code:65 
      NS Error 1:12541 
      NS Error 2:12560 
NT Generic Error:511 
  Protocol Error:2 
        OS Error:0 
 NS & NT Errors Translation 
12541, 00000 "TNS:Cannot connect. No listener at %s."  
 //  *Cause: The connection request could not be completed because either the 
 //   database listener process was not running on the specified host 
 //   and port, or an Interprocess Communication (IPC) protocol 
 //   connection was attempted but there was no listener for the 
 //   specified key running on the local machine. PL/SQL applications
 //   using UTL packages can also get this error if the external server
 //   process is not listening on the specified address. 
 // *Action: 
 //  - If the error shows the host and port that the connection tried to 
 //    use, then ensure that a listener process is running on that host 
 //    and is listening on that port. If the message indicates that there 
 //    was no listener at the specified key, then ensure that the listener 
 //    is running on the local machine and listening for the specified 
 //    key. The listener process is used to initially handle all 
 //    connections to Oracle Database.
 //  - Check for mistakes in the specified connection string.
 //  - If you are using an alias from a tnsnames.ora file, then verify 
 //    the correctness of the host and port. Alternatively, verify the 
 //    correctness of the key if you are using an IPC connection.
 //  - If using an Easy Connect connection string, then ensure that the 
 //    host and port are correct. 
 //  - Use lsnrctl to check that the listener is running and to verify 
 //    the port or key it listens to. Run one of the following:
 //      * lsnrctl status
 //      * Or, when a listener is named in the listener.ora file, run:
 //                 lsnrctl status <listener_name>
 //      * Or, if an Oracle Connection Manager (Oracle CMAN) proxy 
 //                 listener is named in the cman.ora file, run:
 //                 cmctl show status -c <cman_name>
 / 
12560, 00000 "TNS:Database communication protocol error." 
 //  *Cause: A lower level communication protocol adapter error occurred. 
 //  *Action: 
 //  - Check for lower level network transport errors in the error stack
 //    for additional information.
 //  - Ensure the protocol specification used in the address for the
 //    connection is correct.
 //  - For further details, turn on network tracing and rerun the
 //    operation. Turn off tracing when the operation is complete.
 //  - Contact Oracle Support.
 / 
00511, 00000 "No listener" 
 // *Cause: The connect request could not be completed because no application 
 // is listening on the address specified, or the application is unable to 
 // service the connect request in a sufficiently timely manner. 
 // *Action: Ensure that the supplied destination address matches one of 
 // the addresses used by the listener - compare the TNSNAMES.ORA entry with 
 // appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to go 
 // by way of an Interchange. Start the listener on the remote machine.  
 / 
/////////////////////////////////////////////////////////////// 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

However, other errors may also exist within the trace file that were not logged from the nserror function.

16.7.5.2 Packet Examples

Trace Assistant enables you to view data packets from both the Oracle Net and TTC communication layers.

You can view the packets using the following options:

  • Summary connectivity (using option -oc)

  • Detailed connectivity (using option -od)

Example 16-16 shows summary information from the -oc option.

Example 16-16 Summary Information from trcasst -oc Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

---> Send 198 bytes - Connect packet 
Connect data length: 140 
Connect Data: 
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)(CID=(PROGRAM=)
    (HOST=sales-server)(USER=joe)))) 
  
<--- Received 76 bytes - Redirect packet 
Redirect data length: 66 
Redirect Data: 
    (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521)) 

---> Send 198 bytes - Connect packet 
Connect data length: 140 
Connect Data: 
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)(CID=(PROGRAM=)
    (HOST=sales-server)(USER=joe)))) 
  
<--- Received 32 bytes - Accept packet 
Connect data length: 0 
---> Send 153 bytes - Data packet 
        Native Services negotiation packet 

<--- Received 127 bytes - Data packet 
        Native Services negotiation packet 

---> Send 32 bytes - Data packet 

<--- Received 140 bytes - Data packet 

    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

The packets being sent or received have a prefix of ---> Send nnn bytes or <--- Received nnn bytes showing that this node is sending or receiving a packet of a certain type and with nnn number of bytes. This prefix enables you to determine if the node is the client or the database server. The connection request is always sent by the client, and received by the database server or listener.

Example 16-17 shows detailed information from the -od option. The output shows all of the details sent along with the connect data in negotiating a connection.

Example 16-17 Detailed Information from trcasst -od Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 
--->  Send   241 bytes - Connect packet
Current NS version number is: 311.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
      can receive attention
      no attention processing
      Don't care
      Maximum SDU size:8192
      Maximum TDU size:32767
      NT protocol characteristics:
            Test for more data
            Test operation
            Full duplex I/O
            Urgent data support
            Generate SIGURG signal
            Generate SIGPIPE signal
            Generate SIGIO signal
            Handoff connection to another
      Line turnaround value :0
      Connect data length :183
      Connect data offset :58
      Connect data maximum size :512
            Native Services wanted
            NAU doing O3LOGON - DH key foldedin
            Native Services wanted
            NAU doing O3LOGON - DH key foldedin
      Cross facility item 1: 0
      Cross facility item 2: 0
      Connection id : Ox000059F70000004C
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)(SRVR=SHARED)(CID=(PROGRAM=)
(HOST=sales-server)(USER=joe))))

<--- Received 76 bytes - Redirect packet
     Redirect data length: 66
(ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=1521))

--->  Send   241 bytes - Connect packet
Current NS version number is: 311.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
      can receive attention
      no attention processing
      Don't care
      Maximum SDU size:8192
      Maximum TDU size:32767
      NT protocol characteristics:
      Test for more data
      Test operation
      Full duplex I/O
      Urgent data support
      Generate SIGURG signal
      Generate SIGPIPE signal
      Generate SIGIO signal
      Handoff connection to another
Line turnaround value :0
Connect data length :183
Connect data offset :58
Connect data maximum size :512
      Native Services wanted
      NAU doing O3LOGON - DH key foldedin
      Native Services wanted
      NAU doing O3LOGON - DH key foldedin
Cross facility item 1: 0
Cross facility item 2: 0
Connection id : Ox000059F70000007A
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=sales.us.example.com)(SRVR=SHARED)(CID=(PROGRAM=)
(HOST=sales-server)(USER=joe))))
<--- Received 32 bytes - Accept packet
      Accepted NS version number is: 310.
Global options for the connection: 
      no attention processing
      Don't care
      Accepted maximum SDU size: 8192 
      Accepted maximum TDU size: 32767 
      Connect data length: 0
            Native Services wanted
            NAU doing O3LOGON - DH key foldedin
            Native Services wanted
            NAU doing O3LOGON - DH key foldedin

--->  Send   153 bytes - Data packet
      Native Services negotiation packet version#: 150999040
           Service data packet #0 for Supervisor has 3 subpackets
               Subpacket #0:  Version #150999040
               Subpacket #1: 0000000000000000
               Subpacket #2: DAABBCEF0003000000040004000100010002
            Service data packet #1 for Authentication has 3 subpackets
               Subpacket #0:  Version #150999040
               Subpacket #1: UB2: 57569
               Subpacket #2: FCFF
            Service data packet #2 for Encryption has 2 subpackets
               Subpacket #0:  Version #150999040
               Subpacket #1: 000000000000000000
            Service data packet #3 for Data Integrity has 2 subpackets
               Subpacket #0:  Version #150999040
               Subpacket #1: 000000

<--- Received 127 bytes - Data packet
     Native Services negotiation packet version#: 135290880
            Service data packet #0 for Supervisor has 3 subpackets
               Subpacket #0:  Version #135290880
               Subpacket #1: 0000
               Subpacket #2: DAABBCEF00030000000200040001
            Service data packet #1 for Authentication has 2 subpackets
               Subpacket #0:  Version #135290880
               Subpacket #1: FBFF
            Service data packet #2 for Encryption has 2 subpackets
               Subpacket #0:  Version #135290880
               Subpacket #1: UB1: 0
            Service data packet #3 for Data Integrity has 2 subpackets
               Subpacket #0:  Version #135290880
               Subpacket #1: UB1: 0
....

--->  Send   11 bytes - Marker packet
      One data byte. 
      Hex character sent over to the server: 2

<--- Received 11 bytes - Marker packet
     One data byte. 
     Hex character sent over to the server: 2

<--- Received 155 bytes - Data packet

--->  Send   25 bytes - Data packet

<--- Received 11 bytes - Data packet

--->  Send   13 bytes - Data packet

<--- Received 11 bytes - Data packet

--->  Send   10 bytes - Data packet
      Data Packet flags:
      End of file
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 
16.7.5.3 Two-Task Common (TTC) Packet Examples

TTC handles requests, such as open cursor, select rows, and update rows that are directed to the database server.

All requests are answered by the database server. If you request to log on, then a response is returned from the database server that the request was completed.

Summary information for TTC from the -ou option is different from other displays in that it shows two packets on each line, rather than one. This is done to mirror the request/response pairings process by which TTC operates.

Output is displayed in the following format:

description TTC_message cursor_number SQL_statement bytes_sent bytes_received

Example 16-18 shows all of the details sent along with the connect data in negotiating a connection.

Example 16-18 trcasst -ou Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

                                                                    Bytes  Bytes 
                                                                     Sent   Rcvd 

Send operation(TTIPRO)                                                 32    140 
Send operation(TTIDTY)                                                 33     22 
Get the session key (OSESSKEY)                                        229    145 
Generic authentication call (OAUTH)                                   368   1001 
Send operation(TTIPFN)                                                 44    144 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1  SELECT USER FROM ...     47    100 
Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    137 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  !Keep Parse  BEGI...    156    145 
Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1  SELECT ATTRIBUTE,...    186    100 
Fast upi calls to opial7 (OALL7)         # 1                          246    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1  SELECT CHAR_VALUE...    208    100 
Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch  SELE...    165    278 
Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1  commit                   31    100 
Execute statement (OEXEC)                # 1  number of rows: 1        25    100 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 60    111 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse  BEGI...    183     41 
Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch  sele...    144    383 
New v8 bundled call (OALL8)              # 1  !Keep Fetch             121    315 
Logoff off of Oracle (OLOGOFF)                                         13     11

    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Example 16-19 shows detailed TTC information from the -ot option.

Example 16-19 Detailed TTC Information from trcasst -ot Output

    *************************************************************************
    *                        Trace  Assistant                                  *            
    *************************************************************************

Set protocol (TTIPRO)
        Operation 01 (con) Send protocol version=6
        Originating platform: x86_64/Linux 2.4.xx

Set protocol (TTIPRO)
        Operation 01 (con) Receive protocol version=6
        Destination platform: x86_64/Linux 2.4.xx

Set datatypes (TTIDTY)

Set datatypes (TTIDTY)

Start of user function (TTIFUN)
        Get the session key (OSESSKEY)

Return opi parameter (TTIRPA)

Start of user function (TTIFUN)
        Generic authentication call (OAUTH)

Return opi parameter (TTIRPA)

Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        V8 session switching piggyback (O80SES)
Start of user function (TTIFUN)
        Get Oracle version/date (OVERSION)

Return opi parameter (TTIRPA)
Oracle Database 23ai Enterprise Edition Release 23.4.0.0.0 - 64bit Production
 Version 23.4.0.0.0
Start of user function (TTIFUN)
        New v8 bundled call (OALL8) Cursor # 0
 Parse Fetch



Describe information (TTIDCB)

Start of user function (TTIFUN)
        Fetch row (OFETCH) Cursor # 3

ORACLE function complete (TTIOER)
ORA-01403: no data found


Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        Cursor Close All (OCCA)
Start of user function (TTIFUN)
        New v8 bundled call (OALL8) Cursor # 0
 Parse Fetch



Describe information (TTIDCB)

Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        Cursor Close All (OCCA)
Start of user function (TTIFUN)
        New v8 bundled call (OALL8) Cursor # 0
 Parse Fetch



Describe information (TTIDCB)

Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        Cursor Close All (OCCA)
Start of user function (TTIFUN)
        New v8 bundled call (OALL8) Cursor # 0
 !Keep Parse



Sending the I/O vector only for fast upi (TTIIOV)

Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        Cursor Close All (OCCA)
Start of user function (TTIFUN)
        New v8 bundled call (OALL8) Cursor # 0
 Parse Fetch



Describe information (TTIDCB)

Piggyback function follows (TTIPFN)
Start of user function (TTIFUN)
        Cursor Close All (OCCA)
Start of user function (TTIFUN)
        Commit (OCOMMIT)

V6 Oracle func complete (TTISTA)


Start of user function (TTIFUN)
        Commit (OCOMMIT)

V6 Oracle func complete (TTISTA)


Start of user function (TTIFUN)
        Logoff off of Oracle (OLOGOFF)
        MAXIMUM OPEN CURSORS: 0
        CURSORS NOT CLOSED: 0


V6 Oracle func complete (TTISTA)
        Succeeded

    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

Example 16-20 shows detailed SQL information from the -ouq option. On each line of the output, the first item displayed is the actual request made. The second item shows on what cursor that operation has been performed. The third item is either a listing of the SQL command or flag that is being answered. The number of bytes sent and received are displayed at the far right. A flag can be one of the following:

  • !PL/SQL = Not a PL/SQL request

  • COM = Commit

  • IOV = Get I/O Vector

  • DEFN = Define

  • EXEC = Execute

  • FETCH = Fetch

  • CAN = Cancel

  • DESCSEL = Describe select

  • DESCBND = Describe Bind

  • BND = Bind

  • PARSE = Parse

  • EXACT = Exact

Example 16-20 Detailed SQL Information from trcasst -ouq Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 
                                                                    Bytes  Bytes 
                                                                     Sent   Rcvd 

Send operation(TTIPRO)                                                 32    140 
Send operation(TTIDTY)                                                 33     22 
Get the session key (OSESSKEY)                                        229    145 
Generic authentication call (OAUTH)                                   368   1001 
Send operation(TTIPFN)                                                 44    144 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1                           47    100 
          SELECT USER FROM DUAL 

Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    137 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  !Keep Parse             156    145 
          BEGIN DBMS_OUTPUT.DISABLE; END; 

Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1                          186    100 
          SELECT ATTRIBUTE,SCOPE,NUMERIC_VALUE,CHAR_VALUE,DA 
          TE_VALUE FROM SYSTEM.PRODUCT_PRIVS WHERE (UPPER('S 
          QL*Plus') LIKE UPPER(PRODUCT)) AND (UPPER(USER) LI 
          KE USERID) 

Fast upi calls to opial7 (OALL7)         # 1                          246    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Parse a statement (OSQL)                 # 1                          208    100 
          SELECT CHAR_VALUE FROM SYSTEM.PRODUCT_PRIVS WHERE 
          (UPPER('SQL*Plus') LIKE UPPER(PRODUCT)) AND ((UPPE 
          R(USER) LIKE USERID) OR (USERID = 'PUBLIC')) AND ( 
          UPPER(ATTRIBUTE) = 'ROLES') 

Fast upi calls to opial7 (OALL7)         # 1                          130    111 
Fetch row (OFETCH)                       # 1                           21    126 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch             165    278 
          SELECT DECODE('A','A','1','2') FROM DUAL 

Send operation(TTIPFN)                                                 51     16 
Parse a statement (OSQL)                 # 1                           31    100 
          commit 

Execute statement (OEXEC)                # 1  number of rows: 1        25    100 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 60    111 
Close cursor (OCLOSE)                    # 1                           17     11 
Send operation(TTIPFN)                                                 36     16 
Fast upi calls to opial7 (OALL7)         # 1  !Keep Parse             183     41 
          BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:1,NULL); E 
          ND; 

Send operation(TTIRXD)                                                 20    111 
Close cursor (OCLOSE)                    # 1                           17     11 
New v8 bundled call (OALL8)              # 0  Parse Fetch             144    383 
          select * from dept 

New v8 bundled call (OALL8)              # 1  !Keep Fetch             121    315 
Logoff off of Oracle (OLOGOFF)                                         13     11 
  
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 
16.7.5.4 Connection Example

These are the sample outputs using the trcasst -la and -li options.

Example 16-21 shows output from the -la option. The output shows the following information:

  • Connect IDs received

  • Socket ID for the connection

  • Operation

    • Receive identifies the trace as a database server trace. In this example, Receive is the operation.

    • Send identifies the trace as a client trace.

  • MULTIPLEX attribute of the DISPATCHERS parameter is set to ON

  • 32-bit session ID

  • Connect data information received

Example 16-21 trcasst -la Output

    ************************************************************************* 
    *                        Trace Assistant                                * 
    ************************************************************************* 

Connection ID: 00000B270000000B 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4FC0B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.example.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
Connection ID: 00000B240000000B 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4FB0B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.example.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
Connection ID: 00000B1F00000008 
        Socket Id: 15 
        Operation: Receive 
        Multiplex: ON 
        Session Id: 8362785DE4F90B19E034080020F793E1 
        Connect Data: 
        (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
        (CONNECT_DATA=(SERVER=shared)
        (SERVICE_NAME=sales.us.example.com)(CID=(PROGRAM=)(HOST=sales-server)
        (USER=oracle)))) 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 
  

Example 16-22 shows output for connection ID 00000B1F00000008 from the -li 00000B1F00000008 option.

Example 16-22 trcasst -li Output

    ************************************************************************* 
    *                               Trace Assistant                         * 
    ************************************************************************* 
<--- Received 246 bytes - Connect packet
Current NS version number is: 310.
Lowest NS version number can accommodate is: 300.
Global options for the connection:
        Can receive attention
        No attention processing
        Don't care
        Maximum SDU size: 8192
        Maximum TDU size: 32767
        NT protocol characteristics:
                Test for more data
                Test operation
                Full duplex I/O
                Urgent data support
                Generate SIGURG signal
                Generate SIGPIPE signal
                Generate SIGIO signal
                Handoff connection to another
        Line turnaround value: 0
        Connect data length: 188
        Connect data offset: 58
        Connect data maximum size: 512
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
        Cross facility item 1: 0
        Cross facility item 2: 0
        Connection id: Ox00000B1F00000008
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=sales-server)(PORT=1521))
    (CONNECT_DATA=(SERVER=shared)(SERVICE_NAME=sales.us.example.com)
    (CID=(PROGRAM=)(HOST=sales-server)(USER=oracle)))) 

---> Send 114 bytes - Accept packet
Accepted NS version number is: 310.
Global options for the connection:
        No attention processing
        Don't care
        Accepted maximum SDU size: 8192
        Accepted maximum TDU size: 32767
        Connect data length: 0
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
                Native Services wanted
                NAU doing O3LOGON - DH key foldedin
        Connection Time out: 1000
        Tick Size: 100
        Reconnect Data: (ADDRESS=(PROTOCOL=tcp)(HOST=sales-server)(PORT=34454))
        Session Id: 8362785DE4F90B19E034080020F793E1
<--- Received 164 bytes - Data packet
        Native Services negotiation packet version#: 135290880
                 Service data packet #0 for Supervisor has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000000000000000
                        Subpacket #2: DAABBCEF0003000000040004000100010002
                 Service data packet #1 for Authentication has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB2: 57569
                        Subpacket #2: FCFF
                 Service data packet #2 for Encryption has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000000000
                 Service data packet #3 for Data Integrity has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000
---> Send 143 bytes - Data packet
        Native Services negotiation packet version#: 135290880
                 Service data packet #0 for Supervisor has 3 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: 0000
                        Subpacket #2: DAABBCEF00030000000200040001
                 Service data packet #1 for Authentication has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: FBFF
                 Service data packet #2 for Encryption has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB1: 0
                 Service data packet #3 for Data Integrity has 2 subpackets
                        Subpacket #0:  Version #135290880
                        Subpacket #1: UB1: 0
<--- Received 48 bytes - Data packet
Set protocol (TTIPRO)
        Operation 01 (con) Receive protocol version=6
        Destination platform: SVR4-be-8.1.0
---> Send 156 bytes - Data packet
Set protocol (TTIPRO)
        Operation 01 (con) Send protocol version=6
        Originating platform: SVR4-be-8.1.0
<--- Received 49 bytes - Data packet
Set datatypes (TTIDTY)
---> Send 38 bytes - Data packet
Set datatypes (TTIDTY)
<--- Received 245 bytes - Data packet
Start of user function (TTIFUN)
        Get the session key (OSESSKEY)
---> Send 161 bytes - Data packet
Return opi parameter (TTIRPA)
... 
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 
16.7.5.5 Statistics Example

The type of statistics gathered is approximately the number of TTC calls, packets, and bytes sent and received between the network partners. Example 16-23 shows typical trace file statistics from the -s option.

Example 16-23 trcasst -s Output

    ************************************************************************* 
    *                               Trace Assistant                         * 
    ************************************************************************* 
---------------------- 
Trace File Statistics: 
---------------------- 
Total number of Sessions: 3 

DATABASE: 
  Operation Count:    0 OPENS,    21 PARSES,    21 EXECUTES,     9 FETCHES 
    Parse Counts: 
       9 PL/SQL,     9 SELECT,      0 INSERT,     0 UPDATE,     0 DELETE, 
       0 LOCK,       3 TRANSACT,    0 DEFINE,     0 SECURE,     0 OTHER 
    Execute counts with SQL data: 
       9 PL/SQL,     0 SELECT,      0 INSERT,     0 UPDATE,     0 DELETE, 
       0 LOCK,       0 TRANSACT,    0 DEFINE,     0 SECURE,     0 OTHER 

  Packet Ratio: 6.142857142857143 packets sent per operation 
  Currently opened Cursors: 0 
  Maximum opened Cursors  : 0 

ORACLE NET SERVICES: 
  Total Calls  :       129 sent,        132 received,          83 oci 
  Total Bytes  :     15796 sent,      13551 received 
    Average Bytes:       122 sent per packet,        102 received per packet 
    Maximum Bytes:      1018 sent,        384 received 

  Grand Total Packets:    129  sent,     132 received 
  
    ************************************************************************* 
    *                    Trace Assistant has completed                      * 
    ************************************************************************* 

16.8 Contacting Oracle Support Services

Some messages recommend contacting Oracle Support Services to report a problem. When you contact Oracle Support Services, have this information available.

  • The hardware, operating system, and release number of the operating system running Oracle Database.

  • The complete release number of Oracle Database, such as release 23.4.0.0.0.

  • All Oracle programs (with release numbers) in use when the error occurred, such as SQL*Plus release 23.4.0.0.0.

  • If you encountered one or more error codes or messages, then the exact code numbers and message text, in the order in which they appeared.

  • The problem severity, according to the following codes:

    • 1: Program not usable. Critical effect on operations.

    • 2: Program usable. Operations severely restricted.

    • 3: Program usable with limited functions. Not critical to overall operations.

    • 4: Problem circumvented by customer. Minimal effect, if any, on operations.

You will also be expected to provide the following:

  • Your name

  • The name of your organization

  • Your Oracle Support ID number

  • Your telephone number