Controlling Host Power to Server

Oracle ILOM provides a set of parameters that enables system administrators to control the power state of a host server.

System administrators can issue power control commands from the Oracle ILOM CLI or web interface. For more details about each power control command, see the following table.

Note:

For Oracle multi-domain server systems, you can control the power state on individual server domains.

Table 8-1 Remote Power Control Commands for Host Managed Devices

User Interface Configurable Target and User Role: CLI: [command] /System (or for multi-domain servers: [command] /Servers/PDomains/PDomain_[n] /HOST) Web: Host Management > Power Control User Role: Admin (a) role Requirement: To apply a selected power option in the web interface, you must click Save.
Web	CLI	Applies to:	Description
Reset	x86 SP: reset /System SPARC: reset -force /System	Any managed server	Use Reset to assert a power-cycle to a managed server, while keeping power applied to system components (such as disk drives and so).
Graceful Reset	reset /System	SPARC server only	Use Graceful Reset to gracefully shut down the host operating system prior to power-cycling the managed server.
Immediate Power Off	stop -force /System	Any managed server	Use Immediate Power Off to directly shut down the power to the managed device.
Graceful Shutdown and Power Off	stop /System	Any managed server	Use Graceful Shutdown and Power Off to gracefully shut down the host operating system prior to shutting down the power to the managed device.
Power On	start /System	Any managed server	Use Power On to apply full power to the managed device.
Power Cycle	stop /System start /System	Any managed server	Use Power Cycle to turn off system power to all system components and then apply full power to all system components.