Registering Hosts and Deploying the Agent

6 Registering Hosts and Deploying the Agent

If you're deploying the Audit Vault Agent, you register the host computers for the targets for which you want to collect audit data and deploy the Audit Vault Agent on each of them.

Note:

Starting in Oracle AVDF 20.9, you can use agentless collection instead of the Audit Vault Agent for up to 20 Oracle Database table audit trails. Starting in Oracle AVDF 20.10, you can also use agentless collection for Microsoft SQL Server directory audit trails for .sqlaudit and .xel (extended events). The total number of audit trails for agentless collection should not exceed 20. See Adding Audit Trails with Agentless Collection.

6.1 About Registering Hosts and Deploying the Agent

Learn how to register hosts and deploying the Audit Vault Agent.

Register a host computer from where audit data is collected. After registering the host, you can deploy the Audit Vault Agent on that host. The Audit Vault Agent is a component of Oracle Audit Vault and Database Firewall (Oracle AVDF) that you can download from the Audit Vault Server console. After being deployed, Audit Vault Agents are ready to collect data from targets. A target is a system that you want to monitor and protect.

Step	Task	Reference Topic
1	Check the requirements.	Audit Vault Agent Requirements
2	Check the documentation about deploying the Audit Vault Agent.	Deploying the Audit Vault Agent on Host Computers
3	Register the host machine (agent machine).	Registering Hosts on the Audit Vault Server
4	Download the Audit Vault Agent software from the Audit Vault Server console and deploy the agent.	Deploying the Audit Vault Agent
5	Activate and start the Audit Vault Agent.	Activating and Starting the Audit Vault Agent
6	In case of any error or issue, refer to the troubleshooting documentation and known issues.	Troubleshooting Oracle Audit Vault and Database Firewall Known Issues

After registering the hosts on the Audit Vault Server, perform the following steps to be able to collect audit records:

Download the Audit Vault Agent software from the Audit Vault Server console.
Deploy the Audit Vault Agent.
Activate the Audit Vault Agent.
Register one or more targets from which you want to collect audit data.
Start collecting data from the targets' audit trails by using the Audit Vault Server console.

See Also:

Registering Targets
Configuring and Managing Audit Trail Collection
Summary of Configuration Steps to understand the high-level workflow for configuring the Oracle Audit Vault and Database Firewall system
Using the Audit Vault Command Line Interface
Deploying the Audit Vault Agent on Host Computers

6.2 Registering Hosts on the Audit Vault Server

Learn about registering hosts on the Audit Vault Server.

Prerequisite: Check Product Compatibility Matrix for supported cluster/platforms for Agent deployment and before proceeding with the host registration.

To register a host computer in the Audit Vault Server:

Log in to the Audit Vault Server console as an administrator.
Click the Agents tab.
In the left navigation menu, click Agents tab.

A list of registered Agents is displayed on the page.
Click Register.
In Name field, enter the name of the Audit Vault Agent. This field is mandatory and must not contain special characters. The system connects to the host using the IP address. The name defined here is a logical name of the Agent and is used for descriptive identification. You may use the host name as the Agent name for easy identification.
The IP Address field is mandatory.
Enter the IP address of the host computer where the Audit Vault Agent is expected to run.

Audit Vault Server validates the connections from the Audit Vault Agent using the registered IP address. In case the host machine contains more than one IP address (for example, the Audit Vault Agent is expected to run on a host with multiple IP addresses or network interfaces), all of the IP addresses have to be registered with the Audit Vault Server. Follow these steps:
1. Enter one of the IP addresses or a unique logical IP address.
2. After setting the IP address, set all the physical IP addresses using which the Audit Vault Agent is expected to connect to the Audit Vault Server as host attributes. Click Add button in the Attributes section.
3. Enter AGENT_PHYSICAL_ADDRESS_XX in the Name field where XX can be any value between 01 and 99.
4. Enter a valid IP address in the corresponding Value field.
Click Save.

An Agent Activation Key is automatically generated when you register the host.

Agent Deployment in a High Availability System

Audit Vault Agent may be associated with multiple IP addresses in the following cases:

Agent installed on a host with multiple network interface cards
Agent installed on a node of high availability cluster
1. Only one Audit Vault Agent installation is necessary for high availability cluster deployment. The Agent installation is needed only on active node of the cluster. Ensure the Audit Vault Agent installation directory is accessible from all nodes of the cluster.
2. Cluster management software must be configured to start, stop, and monitor the Agent by providing the necessary input. The Agent must be started automatically by the cluster management software on the active node and stopped automatically on passive nodes.

Use the following commands in the cluster manager software:

Action Command

To stop the Agent

Agent_Home/bin/agentctl stop

To start the Agent

Agent_Home/bin/agentctl start

To monitor the Agent

Agent_Home/bin/agentctl status

See Also:

REGISTER HOST for the command line syntax to register a host.
Configuring or Changing the Audit Vault Server Services to configure DNS server.
Using Audit Vault Server Console

6.3 Deploying the Audit Vault Agent on Host Computers

Learn about how to deploy the Audit Vault Agent on host computers.

Note:

When you register a host on the Audit Vault Server, an activation key is generated. When you deploy the Audit Vault Agent on the host computer, you need to provide the corresponding activation key, as discussed in the following procedures.

6.3.1 Audit Vault Agent Requirements

Learn about the Audit Vault Agent requirements.

Note:

Recommended Prerequisites for Installing Audit Vault Agent

Ensure that you meet the system requirements. See Product Compatibility Matrix.
Ensure that you meet the following Java requirements:
- Install the supported Java version on the Audit Vault Agent. See Audit Vault Agent: Supported and Tested Java Runtime Environment.
- Apply the latest Java patches.
- Point the JAVA_HOME to the JRE/JDK directory and set the path before installing the Audit Vault Agent.
Ensure that the host machine on which the Audit Vault Agent is deployed has at least 512 MB RAM.
Apply the latest security patches for the OpenSSL libraries that are available from the OS vendor for the specific OS version on the host machine.
Ensure that the host machine on which the Audit Vault Agent is deployed has connectivity to the Audit Vault Server.

In a high availability environment, it must have connectivity to both primary and standby Audit Vault Servers.
Ensure that two Audit Vault Server ports (1521 and 1522 by default) are configured for communication with the Audit Vault Agent.
If you use Network Address Translation (NAT) in the network between the Audit Vault Server and the host machine where the agent is deployed, then ensure that the IP address of the host machine is resolvable from the Audit Vault Server.
Ensure that the user has the required OS permissions to install the agent.

For directory audit trails, the user must be able to access the audit trail location. See About Deploying the Audit Vault Agent for the OS permissions that are required for installing the agent.
Ensure that the Audit Vault Agent home directory is access protected.

Only the Agent user should have write or execute permissions on the agent home directory.
Ensure that the Audit Vault Agent host machine system settings are access protected to prevent malicious users from making modification.
Ensure that the system time of the Audit Vault Agent and the target are synchronized.

They can be in different time zones. The time difference between these two systems (considering time zone conversion) should not exceed two seconds.

Additional Requirements for Starting the Audit Vault Agent as a Service on Windows

For Oracle AVDF 20.4 and earlier releases, comply with one of the following prerequisites:

Install the Visual C++ Redistributable for Visual Studio 2012 Update 4 package from Microsoft on the Windows host machine.

Ensure that the msvcr110.dll file is available in the C:\Windows\System32 directory.
If the msvcr110.dll file is not present, then add it to the <Agent Home>/bin and <Agent Home>/bin/mswin-x86-64 directories.

For Oracle AVDF 20.6 and later releases, comply with one of the following prerequisites:

Install the Visual C++ Redistributable for Visual Studio 2017 package from Microsoft on the Windows host machine.

Ensure that the vcruntime140.dll file is available in the C:\Windows\System32 directory.
If the vcruntime140.dll file is not present, then add it to the <Agent Home>/bin and <Agent Home>/bin/mswin-x86-64 directories.

Note:

There is a known issue in Oracle AVDF 20.5 for starting Audit Vault Agent as a service on Windows. See Error When Starting Audit Vault Agent as a Service on Windows in Oracle AVDF 20.5 for complete information. This issue is resolved in Oracle AVDF 20.6 and later.

6.3.2 Audit Vault Agent Machine Java Best Practices

Learn some best practices regarding Java on the Audit Vault Agent machine.

Ensure installation of Java and the Java home directory is managed by a trusted user.
If Java is upgraded to a major version or if it is patched with security updates, then restart the Audit Vault Agent. This ensures the Audit Vault Agent runs with the updated Java.

6.3.3 Validation During Audit Vault Agent Deployment

Learn about validations performed by Oracle AVDF when deploying the Audit Vault Agent.

Starting Oracle AVDF release 20.6, some validations are performed when deploying Audit Vault Agent.

The following validations are performed when running the agentctl start command. These requirements are mandatory and have to be complied, without which the Audit Vault Agent installation cannot be completed.

Minimum java version is installed on the host machine as per Audit Vault Agent: Supported and Tested Java Runtime Environment.
Audit Vault Agent is being installed on the supported operating system version as per Product Compatibility Matrix.
The Agent machine on which the Audit Vault Agent is being deployed can connect to the Audit Vault Server.

Ensure to comply with the requirements on the Agent machine:

The Agent machine has a minimum of 512MB available space.
The Agent machine must be able to connect to the Audit Vault Server.
Sufficient permissions required to install the Audit Vault Agent are available.

6.3.4 About Deploying the Audit Vault Agent

Audit Vault Agent collects audit trail data from targets. The host computer where you deploy the Audit Vault Agent depends on the type of audit trail that you want to collect. The Audit Vault Agent includes plug-ins for each target type.

Use the following guidelines to choose the host computer where you need to deploy the Audit Vault Agent:

Trail Type	Guideline for Host Computer
`TABLE`	Deploy the Audit Vault Agent on a remote host or on the host machine where the database is running.
`DIRECTORY`	Deploy the Audit Vault Agent on the host machine where the `DIRECTORY` path exists or on a machine from which the `DIRECTORY` path can be accessed.
`TRANSACTION LOG`	Deploy the Audit Vault Agent on the host machine where the GoldenGate Integrated Extract path exists or on a machine from which it can be accessed.
`NETWORK`	Deploy the Audit Vault Agent on the host machine where the database is running.

OS Permissions for Installing the Agent

Operating System	User
Linux/Unix	Any user
Windows	Any user for running the Audit Vault Agent from the command prompt The admin user for registering as a service

Operating System

User

Linux/Unix

Any user

Windows

Any user for running the Audit Vault Agent from the command prompt

The admin user for registering as a service

Note:

Host Monitor Agent on Linux/Unix/AIX/Solaris platforms must be installed as root user.
If directory trails are used then Agent installation user should have read permission on the audit files.
Host Monitor Agent on Windows platform, must be installed as admin user.
Ensure that the host machine has OpenSSL 1.0.1 (or later) installed for Audit Vault Agent.
OpenSSL 1.1.1 and earlier on Windows platforms was deprecated in Oracle AVDF 20.11, and it will be desupported in one of the future releases. To prevent issues, you should move to OpenSSL 3.0.13 or later.

Deploying Audit Vault Agent Remotely or Locally

Table 6-1 Remote Agent or Local Agent

Trail Type	Audit Vault Server Location	Agent Type	Detailed Information
Directory	On-premises	Remote Agent Not installed on the target machine	Audit data is written to the local disk. The local disk is mounted on the remote Agent machine as NFS (Network File System). Remote Agent is not installed on the target machine. Remote Agent should have access to the mounted NFS. Audit data read time includes the network latency involved in accessing NFS. This deployment can be used when the operating system of the target machine is not supported for Audit Vault Agent installation. This deployment can be used when the target machine does not have sufficient memory or CPU resources for the Audit Vault Agent processes. For Oracle Linux operating system, it is recommended to use Kerberos to secure NFS. For non Oracle Linux operating systems, follow the respective OS recommendations to secure NFS.
Directory	On-premises	Local Agent Installed on the target machine	Audit data is written to the local disk. The local Audit Vault Agent is installed on the target machine. The local Audit Vault Agent should have access to the local disk. Audit data read time has no network latency. This deployment can be used when the operating system of the target machine is supported for Audit Vault Agent installation. This deployment can be used when the target machine has sufficient memory and CPU resources for the Audit Vault Agent processes.
Directory	OCI (Oracle Cloud Infrastructure)	Remote Agent Not installed on the target machine	Audit data is written to the local disk. The local disk is mounted on the remote Agent machine as NFS. Remote Agent should have access to the mounted NFS. Remote Agent is not installed on the target machine. If the target is on-premises, then the remote Agent must also be installed on-premises. If the target is on OCI, then the remote Agent must be installed on OCI. OCI virtual firewall for VCN must be configured to allow ingress traffic on ports 1521 and 1522 for Audit Vault Server. This deployment can be used when the operating system of the target machine is not supported for Audit Vault Agent installation. This deployment can be used when the target machine does not have sufficient memory or CPU resources for the Audit Vault Agent processes. For Oracle Linux operating system, it is recommended to use Kerberos to secure NFS. For non Oracle Linux operating systems, follow the respective OS recommendations to secure NFS.
Directory	OCI (Oracle Cloud Infrastructure)	Local Agent Installed on the target machine	Audit data is written to the local disk. The local Audit Vault Agent is installed on the target machine. The local Audit Vault Agent should have access to the local disk. Audit data read time has no network latency. This deployment can be used when the operating system of the target machine is supported for Audit Vault Agent installation. This deployment can be used when the target machine has sufficient memory and CPU resources for the Audit Vault Agent processes.
Table	On-premises	Remote Agent Not installed on the target machine	Audit data is written to the table. Remote Agent is not installed on the target machine. Remote Agent uses connection string to connect to the target. Audit data read time includes the network latency involved in accessing the audit table. This deployment can be used when the operating system of the target machine is not supported for Audit Vault Agent installation. This deployment can be used when the target machine does not have sufficient memory or CPU resources for the Audit Vault Agent processes.
Table	On-premises	Local Agent Installed on the target machine	Audit data is written to the table. The local Audit Vault Agent is installed on the target machine. The local Audit Vault Agent uses connection string to connect to the target. Audit data read time has no network latency. This deployment can be used when the operating system of the target machine is supported for Audit Vault Agent installation. This deployment can be used when the target machine has sufficient memory and CPU resources for the Audit Vault Agent processes.
Table	OCI (Oracle Cloud Infrastructure)	Remote Agent Not installed on the target machine	Audit data is written to the table. Remote Agent is not installed on the target machine. Remote Agent uses connection string to connect to the target. If the target is on-premises, then the remote Agent must also be installed on-premises. If the target is on OCI, then the remote Agent must also be installed on OCI. Audit data read time includes the network latency involved in accessing the audit table. OCI virtual firewall for VCN must be configured to allow ingress traffic on ports 1521 and 1522 for Audit Vault Server. This deployment can be used when the operating system of the target machine is not supported for Audit Vault Agent installation. This deployment can be used when the target machine does not have sufficient memory or CPU resources for the Audit Vault Agent processes.
Table	OCI (Oracle Cloud Infrastructure)	Local Agent Installed on the target machine	Audit data is written to the table. The local Audit Vault Agent is installed on the target machine. The local Audit Vault Agent uses connection string to connect to the target. Audit data read time has no network latency. OCI virtual firewall for VCN must be configured to allow ingress traffic on ports 1521 and 1522 for Audit Vault Server. This deployment can be used when the operating system of the target machine is supported for Audit Vault Agent installation. This deployment can be used when the target machine has sufficient memory and CPU resources for the Audit Vault Agent processes.

Related Topics

6.3.5 Steps Required to Deploy and Activate the Audit Vault Agent

Learn about the procedures to deploy and activate Oracle Audit Vault Agent.

Deploying and activating the Audit Vault Agent on a host machine consists of these steps:

6.3.6 Registering the Host

Learn about the procedure for registering the host.

To register the host on which you deployed the Audit Vault Agent, follow the procedure in Registering Hosts on the Audit Vault Server.

6.3.7 Deploying the Audit Vault Agent

Learn about deploying the Audit Vault Agent.

You must use an OS user account to deploy the Audit Vault Agent. In this step, you copy the agent.jar file from the Audit Vault Server and deploy this file on the host machine.

Note:

Ensure that all security patches from the OS vendor is applied on the host machine.

See Also:

The Audit Vault Agent is supported on Unix and Microsoft Windows platforms. It requires Java version 1.8 to be installed on the host machine. See Product Compatibility Matrix for Agent platform support details for the current release and for the supported Java versions.

To copy and deploy the Audit Vault Agent to the host computer:

Log in to the Audit Vault Server console as an administrator.
Click the Agents tab.

In the left navigation menu:

For release

Action

20.1 and 20.2

Click Agent Software

20.3 and later

Click Downloads

A list of downloadable agent software files are displayed on the page.

Click the Download button against the platform type, and then save the agent.jar file to a location of your choice.

The download process copies the agent.jar file from the Audit Vault Server. Ensure that you always use this agent.jar file when you deploy the Agent.
Using an OS user account, copy the agent.jar file to the host machine where you're deploying the Audit Vault Agent.

Best Practice:

Do not install the Audit Vault Agent as root user.
On a Microsoft Windows system, start a command prompt with Run as Administrator.
In the directory where you placed the agent.jar file, extract it by running:

java -jar agent.jar -d Agent_Home

This creates a directory by the name you enter for Agent_Home, and installs the Audit Vault Agent in that directory.

On a Microsoft Windows system, this command automatically registers a Microsoft Windows service named OracleAVAgent.

Caution:

After deploying the Audit Vault Agent, do not delete the Agent_Home directory unless directed to do so by Oracle Support. If you are updating an existing Audit Vault Agent, then do not delete the existing Agent_Home directory.

Note:

If you run into any issues, see the following topics for more information:

6.3.8 Activating and Starting the Audit Vault Agent

Learn how to activate and start Audit Vault Agent.

In this step, you activate the Audit Vault Agent with the Agent activation key and start the Agent.

Prerequisites

Follow and complete the procedure in Registering Hosts on the Audit Vault Server.
Log in to the Audit Vault Server console as an administrator. See Using Audit Vault Server Console for more information.

To activate and start the agent:

Click the Agents tab.
In the left navigation menu, click Agents.

A list of registered hosts are displayed on the page.
Copy or make a note of the agent activation key for this host.
On the host machine, change directory as follows:

cd Agent_Home/bin

Agent_Home is the directory created in the step 7 above.
Run the following command:
```
agentctl start -k
```
The system prompts as follows:
```
Enter Activation Key:
```
Paste or enter the agent activation key in the following format:
```
<Agent Name>:: XXXX-XXXX-XXXX-XXXX-XXXX
```
The activation key is not displayed as you type it.

Note:
The -k argument is not needed after the initial agentctl start command.

See Also:

Registering and Unregistering the Audit Vault Agent as a Windows Service to start or stop the agent Windows service through the Windows Services applet in the Windows Control Panel, in case the Agent is deployed on a Microsoft Windows host computer.
ACTIVATE HOST for the command line syntax to activate the Agent.

6.3.9 Changing Host Names

Learn about changing host name.

To change the name of a registered host:

If the Audit Vault Agent is already deployed on that host and the Agent is running, then stop the Agent by executing the command below.
For Linux platform:
```
Agent_Home/bin/agentctl stop
```
For Windows platform, if Agent is running as a process:
```
Agent_Home/bin/agentctl stop
```
For Windows platform, if Agent is running as a service:
```
Agent_Home/bin/agentctl stopsvc
```
Log in to the Audit Vault Server console as an administrator. See Using Audit Vault Server Console for more information.
Click the Agents tab.
In the left navigation menu, click Agents.

A list of registered Agents is displayed on the page.
Click the name of the Agent that you want to change.
In the dialog, change the Name or the IP Address field, and then click Save.
If you have changed either the Agent name or the IP address, and if the Agent has already been deployed on that host, then start the Agent by executing the below command. Enter the new activation key when prompted.
For Linux platform:
```
Agent_Home /bin/agentctl start -k
```
For Windows platform, if Agent is running as a process:
```
Agent_Home /bin/agentctl start -k
```
For Windows platform, if Agent is running as a service:
```
Agent_Home /bin/agentctl startsvc -k
```

6.3.10 Configuring Agent Auto Restart Functionality

Learn how to configure the Audit Vault Agent auto restart functionality.

Audit Vault Agent collects audit data from the target and sends it to the Audit Vault Server. The Agent must continuously run to carry out this task seamlessly. In some cases where the host machine (Agent machine) is restarted or the Agent goes down, then the Agent may stop running. It needs to be manually restarted so that it can continue to collect audit data.

Starting with Oracle AVDF release 20.7, the Audit Vault Agent can be configured to restart automatically. This functionality can be configured by the agent user. It periodically monitors the status of the Agent and restarts whenever required.

Note:

In Oracle AVDF releases 20.3 to 20.6, there is an existing functionality which involves configuring a service to restart the Agent. In case you have configured this functionality as mentioned in Audit Vault Agent Auto Start Configuration, then disable this previously configured functionality before proceeding with the below commands.

Run the following commands in the Agent_Home/bin directory to enable or disable the Agent auto restart functionality:

Task	Command
To enable Agent auto restart functionality and to start the Agent	`agentctl startsvc`
To enable Agent auto restart functionality, if the Agent is not activated	`agentctl startsvc -k`
To disable Agent auto restart functionality and to stop the Agent	`agentctl stopsvc`
To enable Agent auto restart functionality when the Agent is already in `RUNNING` status	`agentctl registersvc`
To disable Agent auto restart functionality without stopping the Agent	`agentctl unregistersvc`

Note:

Use the commands wisely as it involves two tasks (enabling or disabling the Agent auto restart functionality and starting or stopping the Agent). In case the Agent is manually stopped and the auto start service is still in effect, then the Agent is automatically started again. If the Audit Vault Agent service is started, do not stop the Agent alone without stopping the service.
The Agent auto restart functionality must be enabled again, after updating the Java version on the Audit Vault Agent.
The Agent auto restart functionality may not work, if the Audit Vault Agent is not properly installed or if it is not registered in the Audit Vault Server console.
In case the Audit Vault Agent is being managed by another application such as cluster manager, then do not use the Agent auto restart functionality.

6.3.11 Configuring Agent Auto Restart Functionality Remotely

Learn how to configure Agent auto restart functionality remotely.

Agent auto restart functionality can be configured remotely starting with Oracle AVDF release 20.8. The administrator can enable this functionality through Audit Vault Server for multiple Audit Vault Agents at a time.

Note:

This functionality is applicable for Audit Vault Agents deployed on Linux/Unix/AIX/Solaris platforms only. It is not applicable for Audit Vault Agents deployed on Windows platform.

Prerequisite

The Audit Vault Agent must be in RUNNING state.

Follow these steps to enable or disable this functionality:

Run the following commands:

Task Command

To configure the Agent auto restart service remotely.

ALTER HOST <host name> SET AUTO_RESTART=Y

To disable the Agent auto restart service configuration remotely.

ALTER HOST <host name> SET AUTO_RESTART=N

6.3.12 Check if Audit Vault Agent Has Auto Restart Functionality Enabled

Learn how to check if the Audit Vault Agent is configured for auto restart functionality.

Follow these steps:

Log in to the Audit Vault Server console as an administrator.
Click the Agents tab.
The Agents sub tab in the left navigation menu is selected by default. A list of registered Audit Vault Agents is displayed on the page.
In the list of registered Agents, identify the specific Agent.
Check the Agent Details column. The Agent Auto Restart Status field confirms if the Audit Vault Agent has auto restart functionality enabled.
Note:

Alternately, the auto restart status can be checked by running the following command from <agent_home>/bin directory:
```
agentctl svcstatus
```

6.3.13 Registering and Unregistering the Audit Vault Agent as a Windows Service

Learn about registering and unregistering Oracle Audit Vault Agent as a Windows service.

Note:

The Audit Vault Agent as a Windows Service is not supported in Oracle Audit Vault and Database Firewall release 12.2.0.7.0. Use the console mode to stop or start the Agent.

6.3.13.1 About the Audit Vault Agent Windows Service

Learn about the Audit Vault Agent Windows service.

When you deploy the Audit Vault Agent on a Microsoft Windows host computer, during agent deployment, a Microsoft Windows service named OracleAVAgent is automatically registered. Additionally, you can register and unregister the agent service using the agentctl command.

When the Audit Vault Agent is registered as a Windows service, you can start or stop the service through the Windows Services applet in the Windows Control Panel.

See Also:

Deploying the Audit Vault Agent

6.3.13.2 Registering the Audit Vault Agent as a Windows Service

You can register Audit Vault Agent as a Windows service.

Deploying the Audit Vault Agent on a Windows host automatically registers a Windows service named agentctl. Use this procedure to register the Windows service again.

Prerequisite

Ensure to comply with one of the following prerequisites for Oracle AVDF 20.4 and earlier releases:

Install Visual C++ Redistributable for Visual Studio 2012 Update 4 package from Microsoft on the Windows target machine. Ensure msvcr110.dll file is available in C:\Windows\System32 directory.
If the msvcr110.dll file is not present, then add it to the <Agent Home>/bin and <Agent Home>/bin/mswin-x86-64 directories.

Ensure to comply with one of the following prerequisites for Oracle AVDF 20.6 and later releases:

Install Visual C++ Redistributable for Visual Studio 2017 package from Microsoft on the Windows target machine. Ensure vcruntime140.dll file is available in C:\Windows\System32 directory.
If the vcruntime140.dll file is not present, then add it to the <Agent Home>/bin and <Agent Home>/bin/mswin-x86-64 directories.

Note:

Registering Audit Vault Agent as a Windows Service

Run the following command on the host machine from the Agent_Home\bin directory:

agentctl registersvc

This adds the Audit Vault Agent service in the Windows services registry.

Note:

Be sure to set the Audit Vault Agent service to use the credentials of the Windows OS user account that was used to deploy the Agent using the java -jar command. Do this in the Service Properties dialog box.
In the Service Properties dialogue, local user name entries in the This account field should be formatted as in the following example: user name jdoe should be entered as .\jdoe. Refer to Microsoft Windows documentation for procedures to do so.

6.3.13.3 Unregistering the Audit Vault Agent as a Windows Service

You can use two methods to unregister the Oracle Audit Vault Agent as a Windows service.

To unregister the Oracle Audit Vault Agent as a Windows Service, use one of the following methods:

Method 1 (Recommended)

On the host machine, run the following command from the Agent_Home\bin directory:

agentctl unregistersvc

This removes the Oracle Audit Vault Agent service from the Windows services registry.
Method 2

If Method 1 fails, then execute the following from the Windows command prompt (Run as Administrator):

cmd> sc delete OracleAVAgent

You can verify that the Audit Vault Agent has been deleted by executing the following query from the Windows command prompt (Run as Administrator):

cmd> sc queryex OracleAVAgent

6.4 Stopping, Starting, and Other Agent Operations

Learn about starting and stopping the agent and other operations.

6.4.1 Stopping and Starting Audit Vault Agent

Learn about stopping and starting Audit Vault Agent.

Topics

Important:

Stop and start the Audit Vault Agent as the same OS user account that you used during installation.

6.4.1.1 Stopping and Starting the Agent on Unix Hosts

Learn about stopping and starting the Agent on Unix hosts.

To start the Audit Vault Agent after initial activation, run the following command from the Agent_Home/bin directory on the host machine:

agentctl start

To stop the Audit Vault Agent run the following command from the Agent_Home/bin directory on the host machine:

agentctl stop

Note:

After the agentctl stop command, execute agentctl status command to ensure the Agent is in STOPPED state before executing the agentctl start command again.
In case the Agent auto start service (Oracle AVDF release 20.7 and onwards) is configured and if the Agent alone is manually stopped, then the Agent is automatically started again. See Configuring Agent Auto Restart Functionality for complete information and run the right commands.

6.4.1.2 Stopping and Starting the Agent on Windows Hosts

Learn about stopping and starting the Agent on Microsoft Windows hosts.

The Audit Vault Agent is automatically registered as a Windows service when you deploy the agent on a Windows host. We recommend that you run the agent as a Windows service so that it can keep running after the user logs out.

To stop or start the Agent Windows service

Use one of the methods below:

In the Windows GUI (Control Panel > Administrative Tools > Services), find the Audit Vault Agent service, and then right-click it to select Start or Stop.
Run one of these commands from the Agent_Home\bin directory on the host machine:
```
agentctl stopsvc
```
```
agentctl startsvc
```

To check that the Windows service is stopped

Run this command:

cmd> sc queryex OracleAVAgent

You should see the Agent Windows service in a STOPPED state.

To stop or start the Agent in console mode

start /b agentctl stop

start /b agentctl start

To forcibly stop the Agent in console mode

agentctl stop -force

Note:

This is not a recommended option to stop the Agent. Use it only in case the Agent goes into an unreachable state for a long time and cannot be restarted or stopped. In such a scenario, use this option to forcibly stop and later restart the Agent.

To restart the Agent use the agentctl start command.

6.4.1.3 Autostarting the Agent on Windows Hosts

Learn about autostarting the agent on Microsoft Windows hosts.

You can configure the agent service to start automatically on a Windows host.

Open the Services Management Console.

From the Start menu, select Run, and in the Run dialog box, enter services.msc to start the Services Management Console.
Right-click Oracle Audit Vault Agent and from the menu, select Properties.
In the Properties dialog box, set the Startup type setting to Automatic.
Click OK.
Close the Services Management Console.

6.4.2 Changing the Logging Level for the Audit Vault Agent

Learn how to change the logging level for Oracle Audit Vault Agent.

The logging level that you set affects the amount of information that Oracle writes to the log files. You may need to take this into account due to disc space limitations.

Log files are located in the Agent_Home/av/log directory.

The following logging levels are listed in the order of the amount of information written to log files, where debug provides the most information:

error - Writes only error messages
warning - (Default) Writes warning and error messages
info - Writes informational, warning, and error messages
debug - Writes detailed messages for debugging purposes

Using the Audit Vault Server Console to Change Logging Levels

To change the logging level for the Audit Vault Agent using the Audit Vault Server UI, see "Clearing Diagnostic Logs".

Using AVCLI to Change the Agent Logging Level

To change the logging level for the Audit Vault Agent using the AVCLI utility:

Ensure that you are logged into AVCLI on the Audit Vault Server.
Run the ALTER HOST command.

The syntax is as follows:

ALTER HOST host_name SET LOGLEVEL=av.agent:log_level

In this specification:
- host_name: The name of the host where the Audit Vault Agent is deployed.
- log_level: Enter a value of info, warn, debug, or error.

6.4.3 Viewing the Status and Details of Audit Vault Agent

Learn about viewing the status and details of Audit Vault Agent.

You can view an Audit Vault Agent's status and details such as activation key, platform, version, location, and other details.

Prerequisite

To view the status and details of an Audit Vault Agent:

Click the Agents tab.
In the left navigation menu, click Agents.

A list of registered Agents is displayed on the page.
In this list of registered Agents, check the Agent Status, Host Monitor Status, Activation Key, Agent Details, and Host Monitor Details columns for the Agent that you are interested in.
To see the audit trails for a specific Agent host, click View Audit Trails in the Agent Details column.

6.4.4 Deactivating and Removing Audit Vault Agent

Learn about deactivating and removing Audit Vault Agent.

Use this procedure to deactivate and remove Audit Vault Agent.

See Also:

If you have registered the Audit Vault Agent as a Windows service, see Registering and Unregistering the Audit Vault Agent as a Windows Service to unregister the service.

Stop all audit trails being collected by the Audit Vault Agent.
1. In the Audit Vault Server console, click the Targets tab.
2. Click Audit Trails in the left navigation menu.
3. Select the check boxes for each audit trail that you want to stop, and then click Stop.
Stop the Audit Vault Agent by running the following command on the host computer:
```
agentctl stop
```
Deactivate the Audit Vault Agent on the host computer:
1. In the Audit Vault Server console, click the Agents tab, and then in the left navigation menu, select Agents.
2. Select the check box for each host name that you want to deactivate, and then click Deactivate.
3. Optionally, drop the host by selecting the check box for it, and then clicking Delete.
4. Delete the Audit Vault Agent home directory on the host computer.
Note:

The Audit Vault Agent deployed on a host is associated with the specific Audit Vault Server from where it was downloaded. This Audit Vault Agent collects audit data from the configured targets. It sends this data to the specific Audit Vault Server. To configure the audit trail collection from the existing targets to a different Audit Vault Server, you should deactivate, remove the existing Agent, download the Audit Vault Agent installation file from the new Audit Vault Server, and install it on the target host. This scenario is different from updating the existing Auditing Vault Agent.

6.5 Updating Audit Vault Agent

Learn about updating Audit Vault Agent.

When you update the Audit Vault Server, the Audit Vault Agent is automatically updated. When you upgrade the Audit Vault Server to a later version, or restart the Audit Vault Agent, you no longer need to restart audit trails manually. The audit trails associated with the Audit Vault Agent automatically restart if you have not explicitly stopped them. If you upgrade the Audit Vault Server, the audit trails associated with the updated Agents will automatically restart if the trails have a single plug-in.

See Also:

Oracle Audit Vault and Database Firewall Installation Guide for information about downloading upgrade software.

6.6 Deploying Plug-ins and Registering Plug-in Hosts

Learn about deploying plug-ins and registering plug-in hosts.

6.6.1 About Plug-ins

Learn about plug-ins for Audit Vault Server.

Each type of target has a corresponding software plug-in in the Audit Vault Server, which enables the Audit Vault Agent to collect audit data. You can deploy more plug-ins, in addition to those shipped with Oracle Audit Vault and Database Firewall, in order to collect audit data from more target types.

A plug-in supports only one target type. However, you may deploy more than one plug-in for the same target type if, for example, you acquired each plug-in from a different developer, or each plug-in supports a specific type of audit trail for the same target type. You can select the specific plug-in to use when you configure audit trail collections.

To start collecting audit data from the target type associated with a plug-in, you must also add the target in the Audit Vault Server, then configure and manually start audit trail collection.

Deploying a plug-in consists of three steps:

6.6.2 Ensuring that Auditing is Enabled in a Target

Learn how to ensure that auditing is enabled in a target.

Ensure that auditing has been enabled in the target. See the target's product documentation for more information.

See Also:

Ensuring that Auditing is Enabled on the Target for information on plug-ins for Oracle Database.

6.6.3 Registering the Plug-in Host in Audit Vault Server

Learn about registering a plug-in host in Audit Vault Server.

To register a host in the Audit Vault Server, see Registering Hosts on the Audit Vault Server.

Oracle AVDF provides out-of-the-box plug-ins for most commonly used trails. See Plug-In Reference for a complete list. You don't need to deploy plug-ins for targets that have existing out-of-the-box plug-ins.

6.6.4 Deploying and Activating the Plug-in

Learn about deploying and activating a plug-in in Audit Vault Server.

To deploy and activate a plug-in:

Log in to the Audit Vault Server console as an administrator.
Click the Settings tab.
In the left navigation menu, select System.
A status page appears, with pane for Configuration and Monitoring.
In the Monitoring pane, click Plug-ins.

The Plug-ins page lists the currently deployed plug-ins:

Description of the illustration plugins-page.png
Copy the plug-in archive to the Audit Vault Server, and make a note of the location of the file. Click Deploy, and in the Plug-in Archive field, enter or browse for the name of the plug-in archive file.

Description of the illustration choose-deploy-plug.png
Click Deploy Plug-in, then click Deploy.

The new plug-in is listed in the Plug-ins page. The updated agent.jar file has a new Deployed Time shown in this page.

The Hosts page displays an Agent Generation Time column for each registered host, indicating the version of the agent.jar on that host.
Copy the updated agent.jar file to each registered host machine.

Register the host machine in case it is not registered.
On the host machine, extract the agent:
```
java -jar agent.jar
```
Note:

Do not download the Agent during the same login session in which the plug-in is deployed, as the agent.jar file is being updated. However, users in other sessions can download the most current version of the agent.jar file after the plug-in deployment process is complete and a new version is available.
See Also:
- Using Audit Vault Server Console
- Registering Hosts on the Audit Vault Server

6.6.5 Removing Plug-ins

Learn about removing plug-ins.

To remove a plug-in:

Log in to the Audit Vault Server console as an administrator.
Click the Settings tab.
In the left navigation menu, select System.
A status page appears, with pane for Configuration and Monitoring.
In the Monitoring pane, click Plug-ins.
Select the plug-in that you want, and then click Un-deploy.

See Also:

Using Audit Vault Server Console

6.7 Deleting Hosts from Audit Vault Server

Learn how to delete hosts from Audit Vault Server.

When you delete a host, if you want to register it again to collect audit data, then you must reinstall the Audit Vault Agent on this host.

To delete hosts:

Log in to the Audit Vault Server console as an administrator.
Click the Agents tab.
In the left navigation menu, click Agents.

A list of registered Agents is displayed on the page.
Select the check boxes for the hosts that you want to delete, and then click Delete.
See Also:
- Working with Lists of Objects in the Audit Vault Server Console to control the view of registered hosts listed.
- Using Audit Vault Server Console