5 Populating the IM Column Store Manually

The database does not automatically populate In-Memory objects whose PRIORITY setting is NONE. To populate these objects, you must execute SQL or PL/SQL.

This chapter contains the following topics:

5.1 About Manual Population of In-Memory Objects

Populate objects manually using either a full table scan, DBMS_INMEMORY program units, or DBMS_INMEMORY_ADMIN.POPULATE_WAIT.

If you enabled an object with PRIORITY set to NONE, and if you want to populate it immediately, then you have the options described in the following sections:

5.1.1 Population Using SELECT

You can initiate population by issuing a SELECT statement that forces a full table scan.

In this case, the database reads each row in the object and converts it to columnar format. Note that the following statement does not guarantee a full table scan:

SELECT COUNT(*) FROM object

The reason is that the optimizer may choose to scan an index. Therefore, Oracle recommends forcing a full table scan by using the FULL hint for SELECT COUNT(*) queries, as in the following example:

SELECT /*+ FULL(customers) NO_PARALLEL(customers) */ COUNT(*) FROM customers;

5.1.2 Population Using DBMS_INMEMORY.POPULATE

The DBMS_INMEMORY.POPULATE procedure achieves the same goal as a full scan.

The database reads every row in the specified object, converts it from row format to columnar format, and then populates it in the IM column store. The following PL/SQL block initiates population of the customer table:

BEGIN
  DBMS_INMEMORY.POPULATE( schema_name => 'SH', table_name => 'CUSTOMERS');
END;
/

5.1.3 Population Using DBMS_INMEMORY_ADMIN.POPULATE_WAIT

The DBMS_INMEMORY_ADMIN.POPULATE_WAIT function initiates population of all INMEMORY objects that have a priority greater than or equal to the specified priority, and returns a status value for the population. A user-specified interval specifies the maximum time that the function waits before returning the value to the caller.

Sample use cases for ensuring that objects are populated include:

  • When the database is closed, open the database with STARTUP RESTRICT so that only administrators can access the database, and then execute POPULATE_WAIT with the desired timeout setting. If POPULATE_WAIT returns -1, indicating a timeout, then reexecute POPULATE_WAIT. When the function returns 0, disable the restricted session so that non-administrative users can query the database.

  • Block database connections by using services or an application tier technique. When no analytic indexes exists, and when the application depends on the IM column store to provide reasonable performance, these techniques prevent runaway queries.

The POPULATE_WAIT function does not accept a table name as input. Rather, the function submits population tasks for all INMEMORY objects with a PRIORITY setting greater than or equal to the priority specified (the default is LOW). If priority is NONE, then the function initiates population for all INMEMORY objects. POPULATE_WAIT does not apply to external tables, which have no priority setting.

The function accepts a population percentage as input, which defaults to 100, and a timeout interval, which defaults to 99999999 seconds (115.74 days). When you execute the function, the database attempts to populate the objects that meet the specified PRIORITY criteria within the timeout interval, and then returns a value indicating the population status.

The following table describes the possible return values for POPULATE_WAIT. The function returns the values 0, 1, 2, and 3 only if the condition is met before the end of the interval specified by timeout. For example, if timeout is 600, then the function returns 1 only if an out-of-memory error occurs before 600 seconds pass. The function returns -1 only if the end of the timeout interval occurs before the database completes the requested operation.

Table 5-1 Return Values for POPULATE_WAIT

Constant Value Description

POPULATE_TIMEOUT

-1

The function timed out while waiting for population to complete.

Existing population jobs continue running in the background after -1 is returned. Reissuing POPULATE_TIMEOUT after -1 is returned reinitiates population; segments that are already populated are not dropped.

POPULATE_SUCCESS

0

All objects that met the priority criteria were populated to the specified percentage of completion.

POPULATE_OUT_OF_MEMORY

1

The In-Memory pool had insufficient memory to populate the objects that met the priority criteria to the specified percentage of completion.

POPULATE_NO_INMEMORY_OBJECTS

2

No INMEMORY objects met the specified priority criteria.

POPULATE_INMEMORY_SIZE_ZERO

3

The In-Memory column store is not enabled.

5.1.4 Population Using DBMS_INMEMORY.REPOPULATE

DBMS_INMEMORY.REPOPULATE forces repopulation of a table, partition, or subpartition that is currently populated in the IM column store.

If you use this procedure on an In-Memory object that is not currently populated, then this procedure is functionally equivalent to DBMS_INMEMORY.POPULATE.

5.2 Forcing Initial Population of an In-Memory Object

You can force population of an object using a full table scan, the POPULATE procedure, the POPULATE_WAIT function, or the REPOPULATE procedure.

Assumptions

This task assumes the following:

  • The IM column store is enabled.

  • You want to enable a table for In-Memory population.

  • You want to force the immediate population of the table into the IM column store.

To force population of an INMEMORY table:

  1. In SQL*Plus or SQL Developer, log in to the database as a user with administrative privileges.

  2. Apply the INMEMORY attribute to the table.

    For example, enable sh.customers for IM population as follows:

    ALTER TABLE sh.customers INMEMORY;
    

    In the preceding example, the default priority is NONE.

  3. Optionally, check the population status by querying V$IM_SEGMENTS.

    For example, use the following statement (sample output included):

    COL OWNER FORMAT a10;
    COL NAME FORMAT a25;
    COL STATUS FORMAT a10;
    
    SELECT OWNER, SEGMENT_NAME NAME,
           POPULATE_STATUS STATUS
    FROM   V$IM_SEGMENTS
    WHERE  SEGMENT_NAME = 'CUSTOMERS';
    
    no rows selected

    The preceding output shows that the object is not yet populated in the IM column store.

  4. Initiate population using one of the following techniques:

    • Query all rows in the table using SELECT with the FULL hint.

      For example, issue the following statement:

      SELECT /*+ FULL(customers) NO_PARALLEL(customers) */ COUNT(*) FROM sh.customers;
    • Execute the DBMS_INMEMORY.POPULATE procedure.

      For example, execute this procedure for sh.customers as follows:

      EXEC DBMS_INMEMORY.POPULATE('SH', 'CUSTOMERS');
    • Execute the DBMS_INMEMORY.REPOPULATE procedure.

      For unpopulated tables, this procedure is functionally equivalent to POPULATE. For example, execute this procedure for sh.customers as follows:

      EXEC DBMS_INMEMORY.REPOPULATE('SH', 'CUSTOMERS');
    • Execute the DBMS_INMEMORY_ADMIN.POPULATE_WAIT function.

      The following code example populates all INMEMORY objects, regardless of PRIORITY setting. The example specifies that the function should wait until all objects are 100% populated, and it should time out with an error if success is not achieved within 1800 seconds (30 minutes).

      VARIABLE b_pop_status NUMBER
      BEGIN
         SELECT DBMS_INMEMORY_ADMIN.POPULATE_WAIT(
                  priority   => 'NONE' ,
                  percentage => 100    ,
                  timeout    => 1800   ,
                  force      => FALSE  )
           INTO :b_pop_status
         FROM   dual;
      END;
      /
      PRINT b_pop_status
      
  5. Optionally, to check the population status, query V$IM_SEGMENTS.

    For example, use the following statement (sample output included):

    SELECT OWNER, SEGMENT_NAME NAME,
           POPULATE_STATUS STATUS
    FROM   V$IM_SEGMENTS
    WHERE  SEGMENT_NAME = 'CUSTOMERS';
    
    OWN NAME       STATUS
    --- ---------- --------------------
    SH  CUSTOMERS  COMPLETED
    

    The table is now populated in the IM column store.

See Also:

5.3 Populating In-Memory Tables Manually: Examples

The following examples illustrate how to populate In-Memory tables manually.

5.3.1 Populating an In-Memory Table Using a Full Table Scan: Example

This example using a full table scan to populate the sh.sales table into the IM column store.

Assume that you are logged in to the database as an administrator, and that you have issued the following DDL statement to add the INMEMORY clause to the sh.sales table:

ALTER TABLE sh.sales INMEMORY;

The preceding statement uses the defaults for the INMEMORY clause: MEMCOMPRESS FOR QUERY and PRIORITY NONE. Because PRIORITY is NONE, the database will not automatically populate the table into the IM column store. The following query confirms that the sh.sales table is not currently populated:

COL OWNER FORMAT a10;
COL NAME FORMAT a25;
COL STATUS FORMAT a10;

SELECT OWNER, SEGMENT_NAME NAME,
       POPULATE_STATUS STATUS
FROM   V$IM_SEGMENTS
WHERE  SEGMENT_NAME = 'SALES';

no rows selected

The following query uses the FULL hint to force a full table scan of sales, thereby initiating population (sample output included):

SELECT /*+ FULL(sales) NO_PARALLEL(sales) */ COUNT(*) FROM sh.sales;

  COUNT(*)
----------
    918843

The following query shows the population status of sales (sample output included):

SET PAGESIZE 50000
COL OWNER FORMAT a3
COL NAME FORMAT a10
COL STATUS FORMAT a20

SELECT OWNER, SEGMENT_NAME NAME, 
       POPULATE_STATUS STATUS
FROM   V$IM_SEGMENTS
WHERE  SEGMENT_NAME = 'SALES';

OWN NAME       STATUS
--- ---------- --------------------
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED
SH  SALES      COMPLETED

16 rows selected.

The following query calculates the compression ratio of the table. The query assumes that the tables are not further compressed on disk.

COL OWNER FORMAT a5
COL SEGMENT_NAME FORMAT a5
SET PAGESIZE 50000

SELECT v.OWNER, v.SEGMENT_NAME, v.BYTES ORIG_SIZE,
       v.INMEMORY_SIZE IN_MEM_SIZE,
       ROUND(v.BYTES / v.INMEMORY_SIZE, 2) COMP_RATIO
FROM   V$IM_SEGMENTS v
ORDER BY 4;

OWNER SEGME  ORIG_SIZE IN_MEM_SIZE COMP_RATIO
----- ----- ---------- ----------- ----------
SH    SALES     851968     1310720        .65
SH    SALES     835584     1310720        .64
SH    SALES     925696     1310720        .71
SH    SALES     958464     1310720        .73
SH    SALES     950272     1310720        .73
SH    SALES     786432     1310720         .6
SH    SALES     876544     1310720        .67
SH    SALES     753664     1310720        .58
SH    SALES    1081344     1310720        .83
SH    SALES     901120     1310720        .69
SH    SALES     925696     1310720        .71
SH    SALES     933888     1310720        .71
SH    SALES     843776     1310720        .64
SH    SALES     999424     1310720        .76
SH    SALES     581632     1507328        .39
SH    SALES     696320     1507328        .46

16 rows selected.

5.3.2 Populating a Table Using the POPULATE Procedure: Example

This example uses DBMS_INMEMORY.POPULATE to initiate population of the sh.customers table into the IM column store.

Assume that you are logged in to the database as an administrator, and that you have issued the following DDL statement to add the INMEMORY clause to the sh.customers table:

ALTER TABLE sh.customers INMEMORY;

The preceding statement uses the defaults for the INMEMORY clause: MEMCOMPRESS FOR QUERY and PRIORITY NONE. Because PRIORITY is NONE, the database will not automatically populate the table into the IM column store. The following query confirms that the sh.customers table is not currently populated:

COL OWNER FORMAT a10;
COL NAME FORMAT a25;
COL STATUS FORMAT a10;

SELECT OWNER, SEGMENT_NAME NAME,
       POPULATE_STATUS STATUS
FROM   V$IM_SEGMENTS
WHERE  SEGMENT_NAME = 'CUSTOMERS';

no rows selected

The following PL/SQL code uses the POPULATE procedure to initiative population:

EXEC DBMS_INMEMORY.POPULATE('SH', 'CUSTOMERS');

The following query shows the population status of customers (sample output included):

SELECT OWNER, SEGMENT_NAME NAME,
       POPULATE_STATUS STATUS
FROM   V$IM_SEGMENTS
WHERE  SEGMENT_NAME = 'CUSTOMERS';

OWN NAME       STATUS
--- ---------- --------------------
SH  CUSTOMERS  COMPLETED

5.3.3 Setting a Timeout Using the POPULATE_WAIT Function: Example

This example uses DBMS_INMEMORY_ADMIN.POPULATE_WAIT to populate all In-Memory tables, regardless of priority setting.

Example 5-1 Specifying a Timeout Interval for In-Memory Population

In this example, the database contains a number of In-Memory tables with a variety of priority settings. Your goal is to populate every In-Memory table to 100% completion in a restricted database session, and then disable the restricted session so that the application can be guaranteed of querying only the In-Memory representations.

Assume that the database is shut down. In SQL*Plus, you connect to an idle instance as SYSDBA, and then execute the following command (sample output included):

SQL> STARTUP RESTRICT
ORACLE instance started.

Total System Global Area 1157624280 bytes
Fixed Size                  8839640 bytes
Variable Size             754974720 bytes
Database Buffers           16777216 bytes
Redo Buffers                7933952 bytes
In-Memory Area            369098752 bytes
Database mounted.
Database opened.

The database is open, but is accessible only to administrative users. You execute the following statements in SQL*Plus (sample output shown in bold):

VARIABLE b_pop_status NUMBER

SELECT DBMS_INMEMORY_ADMIN.POPULATE_WAIT(
         priority   => 'NONE' ,
         percentage => 100    ,
         timeout    => 300    )
  INTO b_pop_status
FROM   DUAL;

PRINT b_pop_status
-1

After 5 minutes, the function returns the number –1. This code indicates that the function timed out while waiting for population to complete. 5 minutes is not long enough to populate all INMEMORY tables. You re-execute the SELECT statement, specifying a 30-minute timeout:

SELECT DBMS_INMEMORY_ADMIN.POPULATE_WAIT(
         priority   => 'NONE' ,
         percentage => 100    ,
         timeout    => 1800   )
  INTO b_pop_status
FROM   DUAL;

PRINT b_pop_status
0

After 8 minutes, the function returns the number 0. This code indicates that all tables are completely populated. You now disable the restricted session so that the application can start query In-Memory objects with full confidence that only In-Memory representations will be accessed:

ALTER SYSTEM DISABLE RESTRICTED SESSION;

5.3.4 Populating an In-Memory External Table Using DBMS_INMEMORY.POPULATE: Example

This example populates an external table that has the INMEMORY option.

This example assumes that you created the external table sh.admin_ext_sales with the INMEMORY option using the sh_sales.csv file.

The admin_ext_sales table is not yet populated. Starting in Oracle Database 19c, a full table scan populates an external table just as it populates a standard table. However, in this scenario, you choose to initiate population by using the DBMS_INMEMORY package.

Note:

Sessions that query In-Memory external tables must have the initialization parameter QUERY_REWRITE_INTEGRITY set to stale_tolerated.

It is important to keep in mind that if an external table is modified, then the results from the IM column store are undefined. Results are also undefined if a partition is altered (by dropping or adding values). This may lead to differences in results between IM and non-IM based scans. You can run DBMS_INMEMORY.REPOPULATE to refresh the IM store so that it is resynchronized with the table data.

To populate the table, you perform the following steps:

  1. Log in as user sh.

  2. Set QUERY_REWRITE_INTEGRITY in the database session:

    ALTER SESSION SET QUERY_REWRITE_INTEGRITY=stale_tolerated;
    
  3. Execute the following PL/SQL program:

    EXEC DBMS_INMEMORY.POPULATE('SH', 'ADMIN_EXT_SALES');
  4. Check the population status by querying V$IM_SEGMENTS:

    COL OWNER FORMAT a3
    COL NAME FORMAT a15
    COL STATUS FORMAT a9
    
    SELECT OWNER, SEGMENT_NAME NAME, 
           POPULATE_STATUS STATUS
    FROM   V$IM_SEGMENTS;
    
    OWN NAME            STATUS
    --- --------------- ---------
    SH  ADMIN_EXT_SALES COMPLETED

    The preceding output shows that the admin_ext_sales table has been populated

See Also:

5.3.5 Refreshing an In-Memory External Table Using the REPOPULATE Procedure: Example

This example repopulates a currently populated In-Memory external table.

This example assumes that you used the comma-delimited flat file /tmp/data/sh_sales.csv to create the sh.admin_ext_sales table with the INMEMORY option, and that you populated this table into the IM column store.

Assume you add a record to /tmp/data/sh_sales.csv as follows:

echo "148,8787,23-NOV-01,2,999,1,23.43" >> /tmp/data/sh_sales.csv
Unlike internal tables, external tables do not use the automatic repopulation mechanism. To refresh external tables, you must use one of the following techniques:
  • Call the DBMS_INMEMORY.REPOPULATE procedure

  • Specify the table as NO INMEMORY, specify it as INMEMORY, and then perform a full table scan

The following example uses the REPOPULATE procedure to force the IM column store to refresh admin_ext_sales:

EXEC DBMS_INMEMORY.REPOPULATE('SH', 'ADMIN_EXT_SALES');