26.3 LOB Functions

Table 26-2 lists the LOB functions that use the LOB locator that are described in this section. Use functions that end in "2" for all new applications.

Beginning with Oracle Database 12c Release 2 (12.2), most LOB functions support Application Continuity (see When Application Continuity in OCI Can Fail Over for a complete list). This support also includes some deprecated LOB functions for compatibility listed in Deprecated Lob Functions.

Beginning with Oracle Database 12c Release 2 (12.2), OCI LOB functions support distributed operations on remote LOBs (CLOB, BLOB) except for OCI LOB functions for BFILES. This includes support for certain queries that select a remote LOB locator that in previous releases returned an error. The only restriction is that all LOB functions that take in two locators should have both LOBs collocated at one database. The following LOB functions throw an error when a remote locator is passed to it: OCILobAssign(), OCILobLocatorAssign(), OCILobEnableBuffering(), OCILobDisableBuffering(), OCILobFlushBuffer(), OCILobArrayRead(), OCILobArrayWrite(), and OCILobLoadFromFile2().

Note:

There is another way of accessing LOBs -- using the data interface for LOBs. You can bind or define character data for a CLOB column or RAW data for a BLOB column, as described in these locations:

Table 26-2 LOB Functions 

Function Purpose

OCIDurationBegin()

Start user duration for temporary LOB

OCIDurationEnd()

End user duration for temporary LOB

OCILobAppend()

Append one LOB to another

OCILobArrayRead()

Read LOB data for multiple locators

OCILobArrayWrite()

Write LOB data for multiple locators

OCILobAssign()

Assign one LOB locator to another

OCILobCharSetForm()

Get character set form from LOB locator

OCILobCharSetId()

Get character set ID from LOB locator

OCILobClose()

Close a previously opened LOB

OCILobCopy2()

Copy all or part of one LOB to another. This function must be used for LOBs of size greater than 4 GB.

OCILobCreateTemporary()

Create a temporary LOB

OCILobDisableBuffering()

Turn LOB buffering off

OCILobEnableBuffering()

Turn LOB buffering on

OCILobErase2()

Erase a portion of a LOB. This function must be used for LOBs of size greater than 4 GB.

OCILobFileClose()

Close a previously opened BFILE

OCILobFileCloseAll()

Close all previously opened files

OCILobFileExists()

Check if a file exists on the server

OCILobFileGetName()

Get directory object and file name from the LOB locator

OCILobFileIsOpen()

Check if file on server is open using this locator

OCILobFileOpen()

Open a BFILE

OCILobFileSetName()

Set directory object and file name in the LOB locator

OCILobFlushBuffer()

Flush the LOB buffer

OCILobFreeTemporary()

Free a temporary LOB

OCILobGetChunkSize()

Get the chunk size of a LOB

OCILobGetContentType()

Retrieve the user-specified content type string (a file format identifier) for a SecureFile

OCILobGetLength2()

Get length of a LOB. This function must be used for LOBs of size greater than 4 GB.

OCILobGetOptions()

Get option settings of a SecureFile

OCILobGetStorageLimit()

Get the maximum length of an internal LOB (BLOB, CLOB, or NCLOB) in bytes

OCILobIsEqual()

Compare two LOB locators for Equality

OCILobIsOpen()

Check to see if a LOB is open

OCILobIsTemporary()

Determine if a given LOB is temporary

OCILobLoadFromFile2()

Load a LOB from a BFILE. This function must be used for LOBs of size greater than 4 GB.

OCILobLocatorAssign()

Assign one LOB locator to another

OCILobLocatorIsInit()

Check to see if a LOB locator is initialized

OCILobOpen()

Open a LOB

OCILobRead2()

Read a portion of a LOB. This function must be used for LOBs of size greater than 4 GB.

OCILobSetContentType()

Store the user-specified content type string of the SecureFile

OCILobSetOptions()

Enable option settings for existing and newly created SecureFiles

OCILobTrim2()

Truncate a LOB. This function must be used for LOBs of size greater than 4 GB.

OCILobWrite2()

Write into a LOB. This function must be used for LOBs of size greater than 4 GB.

OCILobWriteAppend2()

Write data beginning at the end of a LOB. This function must be used for LOBs of size greater than 4 GB.

Note the following for parameters in the OCI LOB calls:

  • For fixed-width client-side character sets, the offset and amount parameters are always in characters for CLOBs and NCLOBs, and in bytes for BLOBs and BFILEs.

  • For varying-width client-side character sets, these rules generally apply:

    • Amount (amtp) parameter - When the amount parameter refers to the server-side LOB, the amount is in characters. When the amount parameter refers to the client-side buffer, the amount is in bytes.

      For more information, see individual LOB calls, such as OCILobGetLength() (deprecated), OCILobGetLength2(), OCILobRead() (deprecated), OCILobRead2(), OCILobWrite() (deprecated), and OCILobWrite2().

    • Offset (offset) parameter - Regardless of whether the client-side character set is varying-width, the offset parameter is always in characters for CLOBs and NCLOBs and in bytes for BLOBs and BFILEs.

  • For many of the LOB operations, regardless of the client-side character set, the amount parameter is in characters for CLOBs and NCLOBs. These LOB operations include OCILobCopy2(), OCILobErase2(), OCILobGetLength2(), OCILobLoadFromFile2(), and OCILobTrim2(). All these operations refer to the amount of LOB data on the server.

A streaming operation means that the LOB is read or written in pieces. Streaming can be implemented using a polling mechanism or by registering a user-defined callback.

26.3.1 OCIDurationBegin()

Starts a user duration for a temporary LOB.

Purpose

Starts a user duration for a temporary LOB.

Syntax

sword OCIDurationBegin ( OCIEnv              *env,
                         OCIError            *err,
                         const OCISvcCtx     *svc, 
                         OCIDuration          parent,
                         OCIDuration         *duration );

Parameters

env (IN/OUT)

Pass as a NULL pointer.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Diagnostic information can be obtained by calling OCIErrorGet().

svc (IN)

An OCI service context handle. Must be non-NULL.

parent (IN)

The duration number of the parent duration. It is one of these:

  • OCI_DURATION_STATEMENT

  • OCI_DURATION_SESSION

duration (OUT)

An identifier unique to the newly created user duration.

Comments

This function starts a user duration. In release 8.1 or later, user durations can be used when creating temporary LOBs. A user can have multiple active user durations simultaneously. The user durations do not have to be nested. The duration parameter is used to return a number that uniquely identifies the duration created by this call.

Related Topics

26.3.2 OCIDurationEnd()

Terminates a user duration for a temporary LOB.

Purpose

Terminates a user duration for a temporary LOB.

Syntax

sword OCIDurationEnd ( OCIEnv             *env, 
                       OCIError           *err, 
                       const OCISvcCtx    *svc,
                       OCIDuration         duration );

Parameters

env (IN/OUT)

Pass as a NULL pointer.

err (IN/OUT)

The OCI error handle. If there is an error, it is recorded in err and this function returns OCI_ERROR. Diagnostic information can be obtained by calling OCIErrorGet().

svc (IN)

OCI service context. This should be passed as NULL for cartridge services.

duration (IN)

A number to identify the user duration.

Comments

This function terminates a user duration. Temporary LOBs that are allocated for the user duration are freed.

26.3.3 OCILobAppend()

Appends a LOB value at the end of another LOB as specified.

Purpose

Appends a LOB value at the end of another LOB as specified.

Syntax

sword OCILobAppend ( OCISvcCtx        *svchp,
                     OCIError         *errhp,
                     OCILobLocator    *dst_locp,
                     OCILobLocator    *src_locp );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

dst_locp (IN/OUT)

An internal LOB locator uniquely referencing the destination LOB. This locator must have been a locator that was obtained from the server specified by svchp.

src_locp (IN)

An internal LOB locator uniquely referencing the source LOB. This locator must have been a locator that was obtained from the server specified by svchp.

Comments

Appends a LOB value at the end of another LOB as specified. The data is copied from the source to the end of the destination. The source and destination LOBs must exist. The destination LOB is extended to accommodate the newly written data. It is an error to extend the destination LOB beyond the maximum length allowed (4 Gigabytes (GB)) or to try to copy from a NULL LOB.

The source and the destination LOB locators must be of the same type (that is, they must both be BLOBs or both be CLOBs). LOB buffering must not be enabled for either type of locator. This function does not accept a BFILE locator as the source or the destination.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.4 OCILobArrayRead()

Reads LOB data for multiple locators in one round-trip.

Purpose

This function can be used for LOBs of size greater than or less than 4 GB.

Syntax

sword OCILobArrayRead ( OCISvcCtx                *svchp,
                        OCIError                 *errhp,
                        ub4                      *array_iter,
                        OCILobLocator           **locp_arr,
                        oraub8                   *byte_amt_arr,
                        oraub8                   *char_amt_arr,
                        oraub8                   *offset_arr,
                        void                    **bufp_arr,
                        oraub8                    bufl_arr,
                        ub1                       piece,
                        void                     *ctxp, 
                        OCICallbackLobArrayRead  (cbfp)
                                        (
                                         void          *ctxp,
                                         ub4            array_iter,
                                         const void    *bufp,
                                         oraub8         lenp,
                                         ub1            piecep
                                         void         **changed_bufpp,
                                         oraub8        *changed_lenp
                                        )
                        ub2                       csid,
                        ub1                       csfrm );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

array_iter (IN/OUT)

IN - This parameter indicates the size of the LOB locator array. For polling this is relevant only for the first call and is ignored in subsequent calls.

OUT - In polling mode, this parameter indicates the array index of the element read from.

locp_arr (IN)

An array of LOB or BFILE locators.

byte_amt_arr (IN/OUT)

An array of oraub8 variables. The array size must be the same as the locator array size. The entries correspond to the amount in bytes for the locators.

IN - The number of bytes to read from the database. Used for BLOB and BFILE always. For CLOB and NCLOB, it is used only when the corresponding value in char_amt_arr is zero.

OUT - The number of bytes read into the user buffer.

char_amt_arr (IN/OUT)

An array of oraub8 variables. The array size must be the same as the locator array size. The entries correspond to the amount in characters for the locators.

IN - The maximum number of characters to read into the user buffer. Ignored for BLOB and BFILE.

OUT - The number of characters read into the user buffer. Undefined for BLOB and BFILE.

offset_arr (IN)

An array of oraub8 variables. The array size must be the same as the locator array size. For character LOBs (CLOBs, NCLOBs) it is the number of characters from the beginning of the LOB; for binary LOBs or BFILEs, it is the number of bytes. The first position is 1.

bufp _arr (IN/OUT)

An array of pointers to buffers into which the piece is read. The array size must be the same as the locator array size.

bufl_arr (IN)

An array of oraub8 variables indicating the buffer lengths for the buffer array. The array size must be the same as the locator array size.

piece (IN)

OCI_ONE_PIECE - The call never assumes polling. If the amount indicated is more than the buffer length, then the buffer is filled as much as possible.

For polling, pass OCI_FIRST_PIECE the first time and OCI_NEXT_PIECE in subsequent calls. OCI_FIRST_PIECE should be passed while using the callback.

ctxp (IN)

The context pointer for the callback function. Can be NULL.

cbfp (IN)

A callback that can be registered to be called for each piece. If this is NULL, then OCI_NEED_DATA is returned for each piece.

The callback function must return OCI_CONTINUE for the read to continue. If any other error code is returned, the LOB read is terminated.

ctxp (IN)

The context for the callback function. Can be NULL.

array_iter (IN)

The index of the element read from.

bufp (IN/OUT)

A buffer pointer for the piece.

lenp (IN)

The length in bytes of the current piece in bufp.

piecep (IN)

Which piece: OCI_FIRST_PIECE, OCI_NEXT_PIECE, or OCI_LAST_PIECE.

changed_bufpp (OUT)

The callback function can put the address of a new buffer if it prefers to use a new buffer for the next piece to read. The default old buffer bufp is used if this parameter is set to NULL.

changed_lenp (OUT)

Length of the new buffer, if provided.

csid (IN)

The character set ID of the buffer data. If this value is 0, then csid is set to the client's NLS_LANG or NLS_CHAR value, depending on the value of csfrm. It is never assumed to be the server character set, unless the server and client have the same settings.

csfrm (IN)

The character set form of the buffer data. The csfrm parameter must be consistent with the type of the LOB.

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - database character set ID

  • SQLCS_NCHAR - NCHAR character set ID

The default value is SQLCS_IMPLICIT. If csfrm is not specified, the default is assumed.

Comments

It is an error to try to read from a NULL LOB or BFILE.

Note:

When reading or writing LOBs, the character set form (csfrm) specified should match the form of the locator itself.

OCILobArrayRead() throws an error when a remote locator is passed to it.

For BFILEs, the operating system file must exist on the server, and it must have been opened by OCILobFileOpen() or OCILobOpen() using the input locator. The Oracle Database must have permission to read the operating system file, and the user must have read permission on the directory object.

When you use the polling mode for OCILobArrayRead(), the first call must specify values for offset_arr and amt_arr, but on subsequent polling calls to OCILobArrayRead(), you need not specify these values.

If the LOB is a BLOB, the csid and csfrm parameters are ignored.

Note:

To terminate an OCILobArrayRead() operation and free the statement handle, use the OCIBreak() call.

The following points apply to reading LOB data in streaming mode:

  • When you use polling mode, be sure to specify the char_amt_arr and byte_amt_arr and offset_arr parameters only in the first call to OCILobArrayRead(). On subsequent polling calls, these parameters are ignored. If both byte_amt_arr and char_amt_arr are set to point to zero and OCI_FIRST_PIECE is passed, then polling mode is assumed and data is read to the end of the LOB. On output, byte_amt_arr gives the number of bytes read in the current piece. For CLOBs and NCLOBs, char_amt_arr gives the number of characters read in the current piece.

  • When you use callbacks, the lenp parameter, which is input to the callback, indicates how many bytes are filled in the buffer. Check the lenp parameter during your callback processing, because the entire buffer may not be filled with data.

  • When you use polling, examine the byte_amt_arr parameter to see how much the buffer is filled for the current piece. For CLOBs and NCLOBs, char_amt_arr returns the number of characters read in the buffer as well.

To read data in UTF-16 format, set the csid parameter to OCI_UTF16ID. If the csid parameter is set, it overrides the NLS_LANG environment variable.

See Also:

26.3.5 OCILobArrayWrite()

Purpose

Writes LOB data for multiple locators in one round-trip. This function can be used for LOBs of size greater than or less than 4 GB.

Syntax

sword OCILobArrayWrite ( OCISvcCtx             *svchp,
                         OCIError              *errhp,
                         ub4                   *array_iter,
                         OCILobLocator         **locp_arr,
                         oraub8                *byte_amt_arr,
                         oraub8                *char_amt_arr,
                         oraub8                *offset_arr,
                         void                 **bufp_arr, 
                         oraub8                *bufl_arr,
                         ub1                    piece,
                         void                  *ctxp, 
                         OCICallbackLobArrayWrite (cbfp)
                                          (
                                            void     *ctxp,
                                            ub4       array_iter,
                                            void     *bufp,
                                            oraub8   *lenp,
                                            ub1      *piecep
                                            void    **changed_bufpp,
                                            oraub8   *changed_lenp
                                          ) 
                         ub2                    csid,
                         ub1                    csfrm );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

array_iter (IN/OUT)

IN - This parameter indicates the size of the LOB locator array. For polling this is relevant only for the first call and is ignored in subsequent calls.

OUT - In polling mode this parameter indicates the array index of the element just written to.

locp_arr (IN/OUT)

An array of LOB locators.

byte_amt_arr (IN/OUT)

An array of pointers to oraub8 variables. The array size must be the same as the locator array size. The entries correspond to the amount in bytes for the locators.

IN - The number of bytes to write to the database. Always used for BLOB. For CLOB and NCLOB it is used only when char_amt_arr is zero.

OUT - The number of bytes written to the database.

char_amt (IN/OUT)

An array of pointers to oraub8 variables. The array size must be the same as the locator array size. The entries correspond to the amount in characters for the locators.

IN - The maximum number of characters to write to the database. Ignored for BLOB.

OUT - The number of characters written to the database. Undefined for BLOB.

offset_arr (IN)

An array of pointers to oraub8 variables. The array size must be the same as the locator array size. Each entry in the array is the absolute offset from the beginning of the LOB value. For character LOBs (CLOBs, NCLOBs), it is the number of characters from the beginning of the LOB; for BLOBs, it is the number of bytes. The first position is 1.

bufp_arr (IN/OUT)

An array of pointers to buffers into which the pieces for the locators are written. The array size must be the same as the locator array size.

bufl_arr (IN)

An array of oraub8 variables indicating the buffer lengths for the buffer array. The array size must be the same as the locator array size.

Note:

This parameter assumes an 8-bit byte. If your operating system uses a longer byte, you must adjust the value of bufl_arr accordingly.

piece (IN)

Which piece of the buffer is being written. The default value for this parameter is OCI_ONE_PIECE, indicating that the buffer is written in a single piece.

The following other values are also possible for piecewise or callback mode: OCI_FIRST_PIECE, OCI_NEXT_PIECE, and OCI_LAST_PIECE.

ctxp (IN)

The context for the callback function. Can be NULL.

cbfp (IN)

A callback that can be registered to be called for each piece. If this is NULL, then OCI_NEED_DATA is returned for each piece. The callback function must return OCI_CONTINUE for the write to continue. If any other error code is returned, the LOB write is terminated.

The callback takes the following parameters:

ctxp (IN)

The context for the callback function. Can be NULL.

array_iter (IN)

The index of the element written to.

bufp (IN/OUT)

A buffer pointer for the piece. This is the same as the bufp passed as an input to the OCILobArrayWrite() routine.

lenp (IN/OUT)

The length (in bytes) of the data in the buffer (IN), and the length (in bytes) of the current piece in bufp (OUT).

piecep (OUT)

Which piece: OCI_NEXT_PIECE or OCI_LAST_PIECE.

changed_bufpp (OUT)

The callback function can put the address of a new buffer if it prefers to use a new buffer for the next piece to read. The default old buffer bufp is used if this parameter is set to NULL.

changed_lenp (OUT)

Length of the new buffer, if provided.

csid (IN)

The character set ID of the data in the buffer. If this value is 0, then csid is set to the client's NLS_LANG or NLS_CHAR value, depending on the value of csfrm.

csfrm (IN)

The character set form of the buffer data. The csfrm parameter must be consistent with the type of the LOB.

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID

  • SQLCS_NCHAR - NCHAR character set ID

The default value is SQLCS_IMPLICIT.

Comments

If LOB data exists, it is overwritten with the data stored in the buffer. The buffers can be written to the LOBs in a single piece with this call, or the buffers can be provided piecewise using callbacks or a standard polling method.

OCILobArrayWrite() throws an error when a remote locator is passed to it.

Note:

When you read or write LOBs, specify a character set form (csfrm) that matches the form of the locator itself.

The parameters piece, csid, and csfrm are the same for all locators of the array.

When you use the polling mode for OCILobArrayWrite(), the first call must specify values for offset_arr, byte_amt_arr, and char_amt_arr, but on subsequent polling calls to OCILobArrayWrite(), you need not specify these values.

If the value of the piece parameter is OCI_FIRST_PIECE, data may need to be provided through callbacks or polling.

If a callback function is defined in the cbfp parameter, then this callback function is invoked to get the next piece after a piece is written to the pipe. Each piece is written from bufp_arr. If no callback function is defined, then OCILobArrayWrite() returns the OCI_NEED_DATA error code. The application must call OCILobArrayWrite() again to write more pieces of the LOBs. In this mode, the buffer pointer and the length can be different in each call if the pieces are of different sizes and from different locations.

A piece value of OCI_LAST_PIECE terminates the piecewise write, regardless of whether the polling or callback method is used.

If the amount of data passed to the database (through either input mechanism) is less than the amount specified by the byte_amt_arr or the char_amt_arr parameter, an ORA-22993 error is returned.

This function is valid for internal LOBs only. BFILEs are not valid, because they are read-only. If the LOB is a BLOB, the csid and csfrm parameters are ignored.

If both byte_amt_arr and char_amt_arr are set to point to zero amount and OCI_FIRST_PIECE is given as input, then polling mode is assumed and data is written until you specify OCI_LAST_PIECE. For CLOBs and NCLOBs, byte_amt_arr and char_amt_arr return the data written by each piece in terms of number of bytes and number of characters respectively. For BLOBs, byte_amt_arr returns the number of bytes written by each piece, whereas char_amt_arr is undefined on output.

To write data in UTF-16 format, set the csid parameter to OCI_UTF16ID. If the csid parameter is set, it overrides the NLS_LANG environment variable.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

See Also:

26.3.6 OCILobAssign()

Assigns one LOB or BFILE locator to another

Purpose

Assigns one LOB or BFILE locator to another.

Syntax

sword OCILobAssign ( OCIEnv                *envhp, 
                     OCIError              *errhp, 
                     const OCILobLocator   *src_locp, 
                     OCILobLocator        **dst_locpp );

Parameters

envhp (IN/OUT)

OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

src_locp (IN)

LOB or BFILE locator to copy from.

dst_locpp (IN/OUT)

LOB or BFILE locator to copy to. The caller must have allocated space for the destination locator by calling OCIDescriptorAlloc().

Comments

Assign source locator to destination locator. After the assignment, both locators refer to the same LOB value. For internal LOBs, the source locator's LOB value gets copied to the destination locator's LOB value only when the destination locator gets stored in the table. Therefore, issuing a flush of the object containing the destination locator copies the LOB value.

OCILobAssign() throws an error when a remote locator is passed to it.

OCILobAssign() cannot be used for temporary LOBs; it generates an OCI_INVALID_HANDLE error. For temporary LOBs, use OCILobLocatorAssign().

For BFILEs, only the locator that refers to the file is copied to the table. The operating system file itself is not copied.

It is an error to assign a BFILE locator to an internal LOB locator, and vice versa.

If the source locator is for an internal LOB that was enabled for buffering, and the source locator has been used to modify the LOB data through the LOB buffering subsystem, and the buffers have not been flushed since the write, then the source locator may not be assigned to the destination locator. This is because only one locator for each LOB can modify the LOB data through the LOB buffering subsystem.

The value of the input destination locator must have been allocated with a call to OCIDescriptorAlloc(). For example, assume the following declarations:

OCILobLocator     *source_loc = (OCILobLocator *) 0;
OCILobLocator     *dest_loc = (OCILobLocator *) 0;

The following code example shows how an application could allocate the source_loc locator.

Allocating a source_loc Source Locator

if (OCIDescriptorAlloc((void  *) envhp, (void  **) &source_loc,
    (ub4) OCI_DTYPE_LOB, (size_t) 0, (void  **) 0))
    handle_error;

Assume that it then selects a LOB from a table into the source_loc to initialize it. The application must allocate the destination locator, dest_loc, before issuing the OCILobAssign() call to assign the value of source_loc to dest_loc, as shown in the following code example.

Allocating a dest_loc Destination Locator

if (OCIDescriptorAlloc((void  *) envhp, (void  **) &dest_loc,
    (ub4)OCI_DTYPE_LOB, (size_t) 0, (void  **) 0))
    handle_error;
if (OCILobAssign(envhp, errhp, source_loc, &dest_loc))
    handle_error

26.3.7 OCILobCharSetForm()

Gets the character set form of the LOB locator, if any.

Purpose

Gets the character set form of the LOB locator, if any.

Syntax

sword OCILobCharSetForm ( OCIEnv                *envhp, 
                          OCIError              *errhp, 
                          const OCILobLocator   *locp, 
                          ub1                   *csfrm );

Parameters

envhp (IN/OUT)

OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

LOB locator for which to get the character set form.

csfrm (OUT)

Character set form of the input LOB locator. If the input locator, locp, is for a BLOB or a BFILE, csfrm is set to 0 because there is no concept of a character set for binary LOBs and BFILEs. The caller must allocate space for csfrm (a ub1).

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID, the default

  • SQLCS_NCHAR - NCHAR character set ID

Comments

Returns the character set form of the input CLOB or NCLOB locator in the csfrm output parameter.

26.3.8 OCILobCharSetId()

Gets the LOB locator's database character set ID of the LOB locator, if any.

Purpose

Gets the LOB locator's database character set ID of the LOB locator, if any.

Syntax

sword OCILobCharSetId ( OCIEnv                  *envhp, 
                        OCIError                *errhp, 
                        const OCILobLocator     *locp, 
                        ub2                     *csid );

Parameters

envhp (IN/OUT)

OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

LOB locator for which to get the character set ID.

csid (OUT)

Database character set ID of the input LOB locator. If the input locator is for a BLOB or a BFILE, csid is set to 0 because there is no concept of a character set for binary LOBs or binary files. The caller must allocate space for the csid ub2.

Comments

Returns the character set ID of the input CLOB or NCLOB locator in the csid output parameter.

26.3.9 OCILobClose()

Closes a previously opened LOB or BFILE.

Purpose

Closes a previously opened LOB or BFILE.

Syntax

sword OCILobClose ( OCISvcCtx      *svchp,
                    OCIError       *errhp, 
                    OCILobLocator  *locp );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

The LOB to close. The locator can refer to an internal or external LOB.

Comments

Closes a previously opened internal or external LOB. No error is returned if the BFILE exists but is not opened. An error is returned if the internal LOB is not open.

Closing a LOB requires a round-trip to the server for both internal and external LOBs. For internal LOBs, close triggers other code that relies on the close call and for external LOBs (BFILEs), close actually closes the server-side operating system file.

It is not mandatory that you wrap all LOB operations inside the open or close calls. However, if you open a LOB, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column. It is an error to commit the transaction before closing all opened LOBs that were opened by the transaction.

When the error is returned, the LOB is no longer marked as open, but the transaction is successfully committed. Hence, all the changes made to the LOB and non-LOB data in the transaction are committed, but the domain and function-based indexing are not updated. If this happens, rebuild your functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance, so if you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.10 OCILobCopy2()

Copies all or a portion of a LOB value into another LOB value.

Purpose

Copies all or a portion of a LOB value into another LOB value. This function must be used for LOBs of size greater than 4 GB. You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobCopy2 ( OCISvcCtx        *svchp,
                    OCIError         *errhp,
                    OCILobLocator    *dst_locp,
                    OCILobLocator    *src_locp,
                    oraub8            amount,
                    oraub8            dst_offset,
                    oraub8            src_offset );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

dst_locp (IN/OUT)

An internal LOB locator uniquely referencing the destination LOB. This locator must have been a locator that was obtained from the server specified by svchp.

src_locp (IN)

An internal LOB locator uniquely referencing the source LOB. This locator must have been a locator that was obtained from the server specified by svchp.

amount (IN)

The number of characters for CLOBs or NCLOBs or the number of bytes for BLOBs to be copied from the source LOB to the destination LOB. The maximum value accepted by this parameter is UB8MAXVAL (18446744073709551615). Specifying UB8MAXVAL also indicates that the entire source LOB will be copied to the destination LOB using the specified source and destination offsets.

dst_offset (IN)

This is the absolute offset for the destination LOB. For character LOBs, it is the number of characters from the beginning of the LOB at which to begin writing. For binary LOBs, it is the number of bytes from the beginning of the LOB from which to begin writing. The offset starts at 1.

src_offset (IN)

This is the absolute offset for the source LOB. For character LOBs, it is the number of characters from the beginning of the LOB. For binary LOBs, it is the number of bytes. Starts at 1.

Comments

Copies all or a portion of an internal LOB value into another internal LOB as specified. The data is copied from the source to the destination. The source (src_locp) and the destination (dst_locp) LOBs must exist.

Copying a complete SecureFile in a column or partition with deduplicate enabled, to a LOB in the same column or partition, causes the copy to be deduplicated.

If the data exists at the destination's start position, it is overwritten with the source data. If the destination's start position is beyond the end of the current data, zero-byte fillers (for BLOBs) or spaces (for CLOBs) are written into the destination LOB from the end of the current data to the beginning of the newly written data from the source. The destination LOB is extended to accommodate the newly written data if it extends beyond the current length of the destination LOB. It is an error to extend the destination LOB beyond the maximum length allowed (that is, 4 gigabytes) or to try to copy from a NULL LOB. Use OCILobCopy2() for LOBs of size greater than 4 GB.

Both the source and the destination LOB locators must be of the same type (that is, they must both be BLOBs or both be CLOBs). LOB buffering must not be enabled for either locator.

This function does not accept a BFILE locator as the source or the destination.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

Note:

You can call OCILobGetLength2() to determine the length of the source LOB.

26.3.11 OCILobCreateTemporary()

Creates a temporary LOB.

Purpose

Creates a temporary LOB.

Syntax

sword OCILobCreateTemporary(OCISvcCtx          *svchp,
                            OCIError           *errhp,
                            OCILobLocator      *locp,
                            ub2                 csid,
                            ub1                 csfrm,
                            ub1                 lobtype,
                            boolean             cache,
                            OCIDuration         duration);

Parameters

svchp (IN)

The OCI service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

A locator that points to the temporary LOB. You must allocate the locator using OCIDescriptorAlloc() before passing it to this function. It does not matter whether this locator points to a LOB; the temporary LOB gets overwritten either way.

csid (IN)

The LOB character set ID. For Oracle8i or later, pass as OCI_DEFAULT.

csfrm (IN)

The LOB character set form of the buffer data. The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID, to create a CLOB. OCI_DEFAULT can also be used to implicitly create a CLOB.

  • SQLCS_NCHAR - NCHAR character set ID, to create an NCLOB.

The default value is SQLCS_IMPLICIT.

lobtype (IN)

The type of LOB to create. Valid values include:

  • OCI_TEMP_BLOB - For a temporary BLOB

  • OCI_TEMP_CLOB - For a temporary CLOB or NCLOB

cache (IN)

Pass TRUE if the temporary LOB should be read into the cache; pass FALSE if it should not. The default is FALSE for NOCACHE functionality.

duration (IN)

The duration of the temporary LOB. The following are valid values:

  • OCI_DURATION_SESSION

  • OCI_DURATION_CALL

Comments

This function creates a temporary LOB and its corresponding index in the user's temporary tablespace.

When this function is complete, the locp parameter points to an empty temporary LOB whose length is zero.

The lifetime of the temporary LOB is determined by the duration parameter. At the end of its duration the temporary LOB is freed. An application can free a temporary LOB sooner with the OCILobFreeTemporary() call.

If the LOB is a BLOB, the csid and csfrm parameters are ignored.

See Also:

Temporary LOB Support for more information about temporary LOBs and their durations

26.3.12 OCILobErase2()

Erases a specified portion of the internal LOB data starting at a specified offset.

Purpose

Erases a specified portion of the internal LOB data starting at a specified offset. This function must be used for LOBs of size greater than 4 GB. You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobErase2 ( OCISvcCtx       *svchp,
                     OCIError        *errhp,
                     OCILobLocator   *locp,
                     oraub8          *amount,
                     oraub8           offset );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

An internal LOB locator that uniquely references the LOB. This locator must have been a locator that was obtained from the server specified by svchp.

amount (IN/OUT)

The number of characters for CLOBs or NCLOBs, or bytes for BLOBs, to erase. On IN, the value signifies the number of characters or bytes to erase. On OUT, the value identifies the actual number of characters or bytes erased.

offset (IN)

Absolute offset in characters for CLOBs or NCLOBs, or bytes for BLOBs, from the beginning of the LOB value from which to start erasing data. Starts at 1.

Comments

The actual number of characters or bytes erased is returned. For BLOBs, erasing means that zero-byte fillers overwrite the existing LOB value. For CLOBs, erasing means that spaces overwrite the existing LOB value.

This function is valid only for internal LOBs; BFILEs are not allowed.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.13 OCILobFileClose()

Closes a previously opened BFILE.

Purpose

Closes a previously opened BFILE.

Syntax

sword OCILobFileClose ( OCISvcCtx            *svchp,
                        OCIError             *errhp,
                        OCILobLocator        *filep );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filep (IN/OUT)

A pointer to a BFILE locator that refers to the BFILE to be closed.

Comments

Closes a previously opened BFILE. It is an error if this function is called for an internal LOB. No error is returned if the BFILE exists but is not opened.

This function is only meaningful the first time it is called for a particular BFILE locator. Subsequent calls to this function using the same BFILE locator have no effect.

26.3.14 OCILobFileCloseAll()

Closes all open BFILEs on a given service context.

Purpose

Closes all open BFILEs on a given service context.

Syntax

sword OCILobFileCLoseAll ( OCISvcCtx   *svchp,
                           OCIError    *errhp );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

Comments

Closes all open BFILEs on a given service context.

26.3.15 OCILobFileExists()

Tests to see if the BFILE exists on the server's operating system.

Purpose

Tests to see if the BFILE exists on the server's operating system.

Syntax

sword OCILobFileExists ( OCISvcCtx        *svchp,
                         OCIError         *errhp,
                         OCILobLocator    *filep,
                         boolean          *flag );

Parameters

svchp (IN)

The OCI service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filep (IN)

Pointer to the BFILE locator that refers to the file.

flag (OUT)

Returns TRUE if the BFILE exists on the server; FALSE if it does not.

Comments

Checks to see if the BFILE exists on the server's file system. It is an error to call this function for an internal LOB.

26.3.16 OCILobFileGetName()

Gets the BFILE locator's directory object and file name.

Purpose

Gets the BFILE locator's directory object and file name.

Syntax

sword OCILobFileGetName ( OCIEnv                   *envhp,
                          OCIError                 *errhp, 
                          const OCILobLocator      *filep, 
                          OraText                  *dir_alias,
                          ub2                      *d_length, 
                          OraText                  *filename, 
                          ub2                      *f_length );

Parameters

envhp (IN/OUT)

OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filep (IN)

BFILE locator for which to get the directory object and file name.

dir_alias (OUT)

Buffer into which the directory object name is placed. This can be in UTF-16. You must allocate enough space for the directory object name. The maximum length for the directory object is 30 bytes.

d_length (IN/OUT)

Serves the following purposes (can be in code point for Unicode, or bytes):

  • IN: length of the input dir_alias string

  • OUT: length of the returned dir_alias string

filename (OUT)

Buffer into which the file name is placed. You must allocate enough space for the file name. The maximum length for the file name is 255 bytes.

f_length (IN/OUT)

Serves the following purposes (in number of bytes):

  • IN: length of the input filename buffer

  • OUT: length of the returned filename string

Comments

Returns the directory object and file name associated with this BFILE locator. The environment handle determines whether it is in Unicode. It is an error to call this function for an internal LOB.

26.3.17 OCILobFileIsOpen()

Tests to see if the BFILE is open.

Purpose

Tests to see if the BFILE is open.

Syntax

sword OCILobFileIsOpen ( OCISvcCtx        *svchp,
                         OCIError         *errhp,
                         OCILobLocator    *filep,
                         boolean          *flag );

Parameters

svchp (IN)

The OCI service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filep (IN)

Pointer to the BFILE locator being examined.

flag (OUT)

Returns TRUE if the BFILE was opened using this particular locator; returns FALSE if it was not.

Comments

Checks to see if a file on the server was opened with the filep BFILE locator. It is an error to call this function for an internal LOB.

If the input BFILE locator was never passed to the OCILobFileOpen() or OCILobOpen() command, the file is considered not to be opened by this locator. However, a different locator may have the file open. Openness is associated with a particular locator.

26.3.18 OCILobFileOpen()

Opens a BFILE on the file system of the server for read-only access.

Purpose

Opens a BFILE on the file system of the server for read-only access.

Syntax

sword OCILobFileOpen ( OCISvcCtx            *svchp,
                       OCIError             *errhp,
                       OCILobLocator        *filep,
                       ub1                   mode );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filep (IN/OUT)

The BFILE to open. It is an error if the locator does not refer to a BFILE.

mode (IN)

Mode in which to open the file. The only valid mode is OCI_FILE_READONLY.

Comments

Opens a BFILE on the file system of the server. The BFILE can be opened for read-only access. BFILEs can not be written through Oracle Database. It is an error to call this function for an internal LOB.

This function is only meaningful the first time it is called for a particular BFILE locator. Subsequent calls to this function using the same BFILE locator have no effect.

26.3.19 OCILobFileSetName()

Sets the directory object and file name in the BFILE locator.

Purpose

Sets the directory object and file name in the BFILE locator.

Syntax

sword OCILobFileSetName ( OCIEnv             *envhp,
                          OCIError           *errhp,
                          OCILobLocator     **filepp,
                          const OraText      *dir_alias,
                          ub2                 d_length, 
                          const OraText      *filename, 
                          ub2                 f_length );

Parameters

envhp (IN/OUT)

OCI environment handle. Contains the UTF-16 setting.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

filepp (IN/OUT)

Pointer to the BFILE locator for which to set the directory object and file name.

dir_alias (IN)

Buffer that contains the directory object name (must be in the encoding specified by the charset parameter of a previous call to OCIEnvNlsCreate() to set in the BFILE locator.

d_length (IN)

Length (in bytes) of the input dir_alias parameter.

filename (IN)

Buffer that contains the file name (must be in the encoding specified by the charset parameter of a previous call to OCIEnvNlsCreate() to set in the BFILE locator.

f_length (IN)

Length (in bytes) of the input filename parameter.

Comments

It is an error to call this function for an internal LOB.

26.3.20 OCILobFreeTemporary()

Frees a temporary LOB.

Purpose

Frees a temporary LOB.

Syntax

sword OCILobFreeTemporary( OCISvcCtx          *svchp,
                           OCIError           *errhp,
                           OCILobLocator      *locp);

Parameters

svchp (IN/OUT)

The OCI service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

A locator uniquely referencing the LOB to be freed.

Comments

This function frees the contents of the temporary LOB to which this locator points. Note that the locator itself is not freed until OCIDescriptorFree() is called. You must always call OCILobFreeTemporary() before calling OCIDescriptorFree() or OCIArrayDescriptorFree() to free the contents of the temporary LOB. See About Freeing Temporary LOBs for more information.

This function returns an error if the LOB locator passed in the locp parameter does not point to a temporary LOB, possibly because the LOB locator:

  • Points to a permanent LOB

  • Pointed to a temporary LOB that has been freed

  • Has never pointed to anything

26.3.21 OCILobGetChunkSize()

Gets the chunk size of a LOB.

Purpose

Gets the chunk size of a LOB.

Syntax

sword OCILobGetChunkSize ( OCISvcCtx       *svchp,
                           OCIError        *errhp,
                           OCILobLocator   *locp,
                           ub4             *chunk_size );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

The internal LOB for which to get the usable chunk size.

chunk_size (OUT)

For LOBs with storage parameter BASICFILE, the amount of a chunk's space that is used to store the internal LOB value. This is the amount that users should use when reading or writing the LOB value. If possible, users should start their writes at chunk boundaries, such as the beginning of a chunk, and write a chunk at a time.

The chunk_size parameter is returned in terms of bytes for BLOBs, CLOBs, and NCLOBs.

For LOBs with storage parameter SECUREFILE, chunk_size is an advisory size and is provided for backward compatibility.

Comments

When creating a table that contains an internal LOB, the user can specify the chunking factor, which can be a multiple of Oracle Database blocks. This corresponds to the chunk size used by the LOB data layer when accessing and modifying the LOB value. Part of the chunk is used to store system-related information, and the rest stores the LOB value. This function returns the amount of space used in the LOB chunk to store the LOB value. Performance is improved if the application issues read or write requests using a multiple of this chunk size. For writes, there is an added benefit because LOB chunks are versioned and, if all writes are done on a chunk basis, no extra versioning is done or duplicated. Users could batch up the write until they have enough for a chunk instead of issuing several write calls for the same chunk.

26.3.22 OCILobGetContentType()

Gets the user-specified content type string for the data in a SecureFile, if set.

Purpose

Gets the user-specified content type string for the data in a SecureFile, if set.

Syntax

sword OCILobGetContentType ( OCIEnv         *envhp, 
                             OCISvcCtx      *svchp,  
                             OCIError       *errhp, 
                             OCILobLocator  *lobp, 
                             oratext        *contenttypep, 
                             ub4            *contenttypelenp,
                             ub4             mode );

Parameters

envhp (IN)

The environment handle.

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that can be passed to OCIErrorGet() for diagnostic information when there is an error.

lobp (IN)

A LOB locator that uniquely references a LOB.

contenttypep (IN/OUT)

Pointer to the buffer where the content type is stored after successful execution. You must allocate the buffer before calling this function. The size of the allocated buffer must be >= OCI_LOB_CONTENTTYPE_MAXSIZE.

contenttypelenp (IN/OUT)

Set this field to the size of contenttypep buffer. After the call successfully executes, this field holds the size of the contenttypep returned.

mode (IN)

For future use. Pass zero now.

Comments

This function only works on SecureFiles. If lobp is not a SecureFile, then the error SECUREFILE_WRONGTYPE is returned. If lobp is buffered, a temporary LOB, or an abstract LOB, then the error SECUREFILE_BADLOB is returned.

If the SecureFile does not have a contenttype associated with it, the contenttype length (contenttypelenp) is returned as 0 without modifying the buffer contenttypep.

The maximum possible size of the ContentType string is defined as:

#define OCI_LOB_CONTENTTYPE_MAXSIZE 128

The ContentType is ASCII (that is, 1-byte/7-bit UTF8).

26.3.23 OCILobGetLength2()

Gets the length of a LOB. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobGetLength2 ( OCISvcCtx      *svchp,
                         OCIError       *errhp,
                         OCILobLocator  *locp,
                         oraub8         *lenp );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

A LOB locator that uniquely references the LOB. For internal LOBs, this locator must have been a locator that was obtained from the server specified by svchp. For BFILEs, the locator can be set by OCILobFileSetName(), by a SELECT statement, or by OCIObjectPin().

lenp (OUT)

On output, it is the length of the LOB if the LOB is not NULL. For character LOBs, it is the number of characters; for binary LOBs and BFILEs, it is the number of bytes in the LOB.

Comments

Gets the length of a LOB. If the LOB is NULL, the length is undefined. The length of a BFILE includes the EOF, if it exists. The length of an empty internal LOB is zero.

Regardless of whether the client-side character set is varying-width, the output length is in characters for CLOBs and NCLOBs, and in bytes for BLOBs and BFILEs.

Note:

Any zero-byte or space fillers in the LOB written by previous calls to OCILobErase2() or OCILobWrite2() are also included in the length count.

26.3.24 OCILobGetOptions()

Obtains the enabled settings corresponding to the given input option types for a given SecureFile LOB.

Purpose

Obtains the enabled settings corresponding to the given input option types for a given SecureFile LOB.

Syntax

sword OCILobGetOptions ( OCISvcCtx         *svchp,
                         OCIError          *errhp,
                         OCILobLocator     *locp,
                         ub4                option_types,
                         void              *optionsp,
                         ub4                optionslenp,
                         ub4                mode );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

The LOB locator or BFILE locator that uniquely references the LOB or BFILE. This locator must have been obtained from the server specified by svchp.

option_types (IN)

The given option types that can be combined by a bit-wise inclusive OR (symbol "|"):

  • Compression - OCI_LOB_OPT_COMPRESS

  • Encryption - OCI_LOB_OPT_ENCRYPT

  • Deduplication - OCI_LOB_OPT_DEDUPLICATE

optionsp (OUT)

The current settings for each of the option types given. Possible values are:

  • OCI_LOB_OPT_COMPRESS_ON

  • OCI_LOB_OPT_ENCRYPT_ON

  • OCI_LOB_OPT_DEDUPLICATE_ON

optionslenp (OUT)

The length of the value in optionsp.

mode (IN)

Reserved for future use. Pass in 0.

Comments

You can only specify option types that have been enabled on the column. An error is returned when an attempt is made to get the value of an option type that is not enabled on the column. For example, if you have a LOB column with compression enabled, and you call OCILobGetOptions() with OCI_LOB_OPT_ENCRYPT set in the option_types parameter, an error occurs.

Note that the returned value is a ub4 pointer cast as a void pointer to allow for future expansion of option types and values. The optionslenp returned should be equal to sizeof(ub4).

26.3.25 OCILobGetStorageLimit()

Gets the maximum length of an internal LOB (BLOB, CLOB, or NCLOB) in bytes.

Purpose

Gets the maximum length of an internal LOB (BLOB, CLOB, or NCLOB) in bytes.

Syntax

sword OCILobGetStorageLimit ( OCISvcCtx      *svchp,
                              OCIError       *errhp,
                              OCILobLocator  *locp,
                              oraub8         *limitp );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

A LOB locator that uniquely references the LOB. The locator must have been one that was obtained from the server specified by svchp.

limitp (OUT)

The maximum length of the LOB (in bytes) that can be stored in the database.

Comments

Because block size ranges from 2 KB to 32 KB, the maximum LOB size ranges from 8 terabytes to 128 terabytes (TB) for LOBs.

26.3.26 OCILobIsEqual()

Compares two LOB or BFILE locators for equality.

Purpose

Compares two LOB or BFILE locators for equality.

Syntax

sword OCILobIsEqual ( OCIEnv                  *envhp,
                      const OCILobLocator     *x,
                      const OCILobLocator     *y,
                      boolean                 *is_equal );

Parameters

envhp (IN)

The OCI environment handle.

x (IN)

LOB locator to compare.

y (IN)

LOB locator to compare.

is_equal (OUT)

TRUE, if the LOB locators are equal; FALSE if they are not.

Comments

Compares the given LOB or BFILE locators for equality. Two LOB or BFILE locators are equal if and only if they both refer to the same LOB or BFILE value.

Two NULL locators are considered not equal by this function.

26.3.27 OCILobIsOpen()

Tests whether a LOB or BFILE is open.

Purpose

Tests whether a LOB or BFILE is open.

Syntax

sword OCILobIsOpen ( OCISvcCtx        *svchp,
                     OCIError         *errhp, 
                     OCILobLocator    *locp, 
                     boolean          *flag );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that can be passed to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

Pointer to the LOB locator being examined. The locator can refer to an internal or external LOB.

flag (OUT)

Returns TRUE if the internal LOB is open or if the BFILE was opened using the input locator. Returns FALSE if it was not.

Comments

Checks to see if the internal LOB is open or if the BFILE was opened using the input locator.

For BFILEs

If the input BFILE locator was never passed to OCILobOpen() or OCILobFileOpen(), the BFILE is considered not to be opened by this BFILE locator. However, a different BFILE locator may have opened the BFILE. Multiple opens can be performed on the same BFILE using different locators. In other words, openness is associated with a specific locator for BFILEs.

For internal LOBs

Openness is associated with the LOB, not with the locator. If locator1 opened the LOB, then locator2 also sees the LOB as open.

For internal LOBs, this call requires a server round-trip because it checks the state on the server to see if the LOB is open. For external LOBs (BFILEs), this call also requires a round-trip because the operating system file on the server side must be checked to see if it is open.

26.3.28 OCILobIsTemporary()

Tests if a locator points to a temporary LOB.

Purpose

Tests if a locator points to a temporary LOB.

Syntax

sword OCILobIsTemporary(OCIEnv            *envhp,
                        OCIError          *errhp,
                        OCILobLocator     *locp,
                        boolean           *is_temporary);

Parameters

envhp (IN)

The OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

The locator to test.

is_temporary (OUT)

Returns TRUE if the LOB locator points to a temporary LOB; FALSE if it does not.

Comments

This function tests a locator to determine if it points to a temporary LOB. If so, is_temporary is set to TRUE. If not, is_temporary is set to FALSE.

26.3.29 OCILobLoadFromFile2()

Loads and copies all or a portion of the file into an internal LOB. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobLoadFromFile2 ( OCISvcCtx        *svchp, 
                            OCIError         *errhp, 
                            OCILobLocator    *dst_locp, 
                            OCILobLocator    *src_locp, 
                            oraub8            amount, 
                            oraub8            dst_offset, 
                            oraub8            src_offset ); 

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

dst_locp (IN/OUT)

A locator uniquely referencing the destination internal LOB, that may be of type BLOB, CLOB, or NCLOB.

src_locp (IN/OUT)

A locator uniquely referencing the source BFILE.

amount (IN)

The number of bytes to be loaded.

dst_offset (IN)

This is the absolute offset for the destination LOB. For character LOBs, it is the number of characters from the beginning of the LOB at which to begin writing. For binary LOBs, it is the number of bytes from the beginning of the LOB from which to begin reading. The offset starts at 1.

src_offset (IN)

This is the absolute offset for the source BFILE. It is the number of bytes from the beginning of the BFILE. The offset starts at 1.

Comments

Loads and copies a portion or all of a BFILE value into an internal LOB as specified. The data is copied from the source BFILE to the destination internal LOB (BLOB or CLOB). No character set conversions are performed when copying the BFILE data to a CLOB or NCLOB. Also, when binary data is loaded into a BLOB, no character set conversions are performed. Therefore, the BFILE data must be in the same character set as the LOB in the database. No error checking is performed to verify this.

OCILobLoadFromFile2() throws an error when a remote locator is passed to it.

The source (src_locp) and the destination (dst_locp) LOBs must exist. If the data exists at the destination's start position, it is overwritten with the source data. If the destination's start position is beyond the end of the current data, zero-byte fillers (for BLOBs) or spaces (for CLOBs) are written into the destination LOB from the end of the data to the beginning of the newly written data from the source. The destination LOB is extended to accommodate the newly written data if it extends beyond the current length of the destination LOB.

It is an error to extend the destination LOB beyond the maximum length allowed (4 gigabytes) (see OCILobLoadFromFile2() to use for LOBs of size greater than 4 GB) or to try to copy from a NULL BFILE.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.30 OCILobLocatorAssign()

Assigns one LOB or BFILE locator to another.

Purpose

Assigns one LOB or BFILE locator to another.

Syntax

sword OCILobLocatorAssign ( OCISvcCtx              *svchp,
                            OCIError               *errhp,
                            const OCILobLocator    *src_locp,
                            OCILobLocator         **dst_locpp );

Parameters

svchp (IN/OUT)

The OCI service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

src_locp (IN)

The LOB or BFILE locator to copy from.

dst_locpp (IN/OUT)

The LOB or BFILE locator to copy to. The caller must allocate space for the OCILobLocator by calling OCIDescriptorAlloc().

Comments

This call assigns the source locator to the destination locator. After the assignment, both locators refer to the same LOB data. For internal LOBs, the source locator's LOB data gets copied to the destination locator's LOB data only when the destination locator gets stored in the table. Therefore, issuing a flush of the object containing the destination locator copies the LOB data. For BFILEs, only the locator that refers to the operating system file is copied to the table; the operating system file is not copied.

OCILobLocatorAssign() throws an error when a remote locator is passed to it.

Note that this call is similar to OCILobAssign(), but OCILobLocatorAssign() takes an OCI service handle pointer instead of an OCI environment handle pointer. Also, OCILobLocatorAssign() can be used for temporary LOBs, but OCILobAssign() cannot be used for temporary LOBs.

Note:

If the OCILobLocatorAssign() function fails, the target locator is not restored to its previous state. The target locator should not be used in subsequent operations unless it is reinitialized.

If the destination locator is for a temporary LOB, the destination temporary LOB is freed before the source LOB locator is assigned to it.

If the source LOB locator refers to a temporary LOB, the destination is made into a temporary LOB too. The source and the destination are conceptually different temporary LOBs. In the OCI_DEFAULT mode, the source temporary LOB is deep copied, and a destination locator is created to refer to the new deep copy of the temporary LOB. Hence OCILobIsEqual() returns FALSE after the OCILobLocatorAssign() call. However, in the OCI_OBJECT mode, an optimization is made to minimize the number of deep copies, so the source and destination locators point to the same LOB until any modification is made through either LOB locator. Hence OCILobIsEqual() returns TRUE right after OCILobLocatorAssign() until the first modification. In both these cases, after the OCILobLocatorAssign(), any changes to the source or the destination do not reflect in the other (that is, destination or source) LOB. If you want the source and the destination to point to the same LOB and want your changes to reflect in the other, then you must use the equal sign to ensure that the two LOB locator pointers refer to the same LOB locator.

26.3.31 OCILobLocatorIsInit()

Tests to see if a given LOB or BFILE locator is initialized.

Purpose

Tests to see if a given LOB or BFILE locator is initialized.

Syntax

sword OCILobLocatorIsInit ( OCIEnv               *envhp,
                            OCIError             *errhp,
                            const OCILobLocator  *locp,
                            boolean              *is_initialized );

Parameters

envhp (IN/OUT)

OCI environment handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

The LOB or BFILE locator being tested.

is_initialized (OUT)

Returns TRUE if the given LOB or BFILE locator is initialized; returns FALSE if it is not.

Comments

Tests to see if a given LOB or BFILE locator is initialized.

Internal LOB locators can be initialized by one of these methods:

  • Selecting a non-NULL LOB into the locator

  • Pinning an object that contains a non-NULL LOB attribute by OCIObjectPin()

  • Setting the locator to empty by OCIAttrSet()

BFILE locators can be initialized by one of these methods:

  • Selecting a non-NULL BFILE into the locator

  • Pinning an object that contains a non-NULL BFILE attribute by OCIObjectPin()

  • Calling OCILobFileSetName()

26.3.32 OCILobOpen()

Opens a LOB, internal or external, in the indicated mode.

Purpose

Opens a LOB, internal or external, in the indicated mode.

Syntax

sword OCILobOpen ( OCISvcCtx        *svchp,
                   OCIError         *errhp, 
                   OCILobLocator    *locp, 
                   ub1               mode );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

The LOB to open. The locator can refer to an internal or external LOB.

mode (IN)

The mode in which to open the LOB or BFILE. In Oracle8i or later, valid modes for LOBs are OCI_LOB_READONLY and OCI_LOB_READWRITE. Note that OCI_FILE_READONLY exists as input to OCILobFileOpen(). OCI_FILE_READONLY can be used with OCILobOpen() if the input locator is for a BFILE.

Comments

It is an error to open the same LOB twice. BFILEs cannot be opened in read/write mode. If a user tries to write to a LOB or BFILE that was opened in read-only mode, an error is returned.

Opening a LOB requires a round-trip to the server for both internal and external LOBs. For internal LOBs, the open triggers other code that relies on the open call. For external LOBs (BFILEs), open requires a round-trip because the actual operating system file on the server side is being opened.

It is not necessary to open a LOB to perform operations on it. When using function-based indexes, extensible indexes or context, and making multiple calls to update or write to the LOB, you should first call OCILobOpen(), then update the LOB as many times as you want, and finally call OCILobClose(). This sequence of operations ensures that the indexes are only updated once at the end of all the write operations instead of once for each write operation.

It is not mandatory that you wrap all LOB operations inside the open and close calls. However, if you open a LOB, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column. It is an error to commit the transaction before closing all opened LOBs that were opened by the transaction.

When the error is returned, the LOB is no longer marked as open, but the transaction is successfully committed. Hence, all the changes made to the LOB and non-LOB data in the transaction are committed, but the domain and function-based indexing are not updated. If this happens, rebuild your functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance, so if you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.33 OCILobRead2()

Reads a portion of a LOB or BFILE, as specified by the call, into a buffer. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobRead2 ( OCISvcCtx           *svchp,
                    OCIError            *errhp,
                    OCILobLocator       *locp,
                    oraub8              *byte_amtp,
                    oraub8              *char_amtp,
                    oraub8               offset,
                    void                *bufp,
                    oraub8               bufl,
                    ub1                  piece,
                    void                *ctxp, 
                    OCICallbackLobRead2 (cbfp)
                                        ( void          *ctxp,
                                          const void    *bufp,
                                          oraub8         lenp,
                                          ub1            piecep
                                          void         **changed_bufpp,
                                          oraub8        *changed_lenp
                                        )
                    ub2                  csid,
                    ub1                  csfrm );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN)

A LOB or BFILE locator that uniquely references the LOB or BFILE. This locator must have been a locator that was obtained from the server specified by svchp.

byte_amtp (IN/OUT)

IN - The number of bytes to read from the database. Used for BLOB and BFILE always. For CLOB and NCLOB, it is used only when char_amtp is zero.

OUT - The number of bytes read into the user buffer.

char_amtp (IN/OUT)

IN - The maximum number of characters to read into the user buffer. Ignored for BLOB and BFILE.

OUT - The number of characters read into the user buffer. Undefined for BLOB and BFILE.

offset (IN)

On input, this is the absolute offset from the beginning of the LOB value. For character LOBs (CLOBs, NCLOBs), it is the number of characters from the beginning of the LOB; for binary LOBs or BFILEs, it is the number of bytes. The first position is 1.

If you use streaming (by polling or a callback), specify the offset in the first call; in subsequent polling calls, the offset parameter is ignored. When you use a callback, there is no offset parameter.

bufp (IN/OUT)

The pointer to a buffer into which the piece is read. The length of the allocated memory is assumed to be bufl.

bufl (IN)

The length of the buffer in octets. This value differs from the amtp value for CLOBs and for NCLOBs (csfrm=SQLCS_NCHAR) when the amtp parameter is specified in terms of characters, and the bufl parameter is specified in terms of bytes.

piece (IN)

OCI_ONE_PIECE - The call never assumes polling. If the amount indicated is more than the buffer length, then the buffer is filled as much as possible.

For polling, pass OCI_FIRST_PIECE the first time and OCI_NEXT_PIECE in subsequent calls. OCI_FIRST_PIECE should be passed while using the callback.

ctxp (IN)

The context pointer for the callback function. Can be NULL.

cbfp (IN)

A callback that can be registered to be called for each piece. If this is NULL, then OCI_NEED_DATA is returned for each piece.

The callback function must return OCI_CONTINUE for the read to continue. If any other error code is returned, the LOB read is terminated.

ctxp (IN)

The context for the callback function. Can be NULL.

bufp (IN/OUT)

A buffer pointer for the piece.

lenp (IN)

The length in bytes of the current piece in bufp.

piecep (IN)

Which piece: OCI_FIRST_PIECE, OCI_NEXT_PIECE, or OCI_LAST_PIECE.

changed_bufpp (OUT)

The callback function can put the address of a new buffer if it prefers to use a new buffer for the next piece to read. The default old buffer bufp is used if this parameter is set to NULL.

changed_lenp (OUT)

Length of the new buffer, if provided.

csid (IN)

The character set ID of the buffer data. If this value is 0, then csid is set to the client's NLS_LANG or NLS_CHAR value, depending on the value of csfrm. It is never assumed to be the server character set, unless the server and client have the same settings.

csfrm (IN)

The character set form of the buffer data. The csfrm parameter must be consistent with the type of the LOB.

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID

  • SQLCS_NCHAR - NCHAR character set ID

The default value is SQLCS_IMPLICIT. If csfrm is not specified, the default is assumed.

Comments

Reads a portion of a LOB or BFILE as specified by the call into a buffer. It is an error to try to read from a NULL LOB or BFILE.

Note:

When you read or write LOBs, specify a character set form (csfrm) that matches the form of the locator itself.

For BFILEs, the operating system file must exist on the server, and it must have been opened by OCILobFileOpen() or OCILobOpen() using the input locator. Oracle Database must have permission to read the operating system file, and the user must have read permission on the directory object.

When you use the polling mode for OCILobRead2(), the first call must specify values for offset and amtp, but on subsequent polling calls to OCILobRead2(), you need not specify these values.

If the LOB is a BLOB, the csid and csfrm parameters are ignored.

Note:

To terminate an OCILobRead2() operation and free the statement handle, use the OCIBreak() call.

The following points apply to reading LOB data in streaming mode:

  • When you use polling mode, be sure to specify the char_amtp and byte_amtp and offset parameters only in the first call to OCILobRead2(). On subsequent polling calls these parameters are ignored. If both byte_amtp and char_amtp are set to point to zero and OCI_FIRST_PIECE is passed, then polling mode is assumed and data is read till the end of the LOB. On output, byte_amtp gives the number of bytes read in the current piece.

    For CLOBs and NCLOBs, char_amtp gives the number of characters read in the current piece.

    For CLOBs and NCLOBs, if you do not pass char_amtp, then char_amtp is calculated internally as byte_amtp/max char width, so if max char width is 4, char_amtp is calculated as byte_amtp/4. Thus, OCILobRead2() does not calculate how many bytes are required for each character. Instead, OCILobRead2() fetches in the worst case the number of characters that can fit in byte_amtp. To fill the buffer, check the byte_amtp parameter to see how much of the buffer is filled, then call OCILobRead2() again to fetch the remaining bytes.

  • When you use callbacks, the len parameter, which is input to the callback, indicates how many bytes are filled in the buffer. Check the len parameter during your callback processing, because the entire buffer cannot be filled with data.

  • When you use polling, look at the byte_amtp parameter to see how much the buffer is filled for the current piece. For CLOBs and NCLOBs, char_amtp returns the number of characters read in the buffer as well.

To read data in UTF-16 format, set the csid parameter to OCI_UTF16ID. If the csid parameter is set, it overrides the NLS_LANG environment variable.

See Also:

26.3.34 OCILobSetContentType()

Sets a content type string for the data in the SecureFile to something that can be used by an application.

Purpose

Sets a content type string for the data in the SecureFile to something that can be used by an application.

Syntax

sword OCILobSetContentType ( OCIEnv        *envhp, 
                             OCISvcCtx     *svchp, 
                             OCIError      *errhp, 
                             OCILobLocator *lobp, 
                             const oratext *contenttypep, 
                             ub4            contenttypelen,
                             ub4            mode);

Parameters

envhp (IN)

The environment handle.

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that can be passed to OCIErrorGet() for diagnostic information when there is an error.

lobp (IN)

A LOB locator that uniquely references a LOB.

contenttypep (IN)

The contenttype to be set for the given LOB.

contenttypelen (IN)

The size of contenttype in bytes. The size must be less than or equal to OCI_LOB_CONTENTTYPE_MAXSIZE bytes.

mode (IN)

For future use. Pass zero now.

Comments

This function only works on SecureFiles. If lobp is not a SecureFile, then the error SECUREFILE_WRONGTYPE is returned. If lobp is buffered, a temporary LOB, or an abstract LOB, then the error SECUREFILE_BADLOB is returned.

The maximum possible size of the ContentType string is defined as:

#define OCI_LOB_CONTENTTYPE_MAXSIZE 128

The ContentType is ASCII (that is, 1-byte/7-bit UTF8).

To clear an existing contenttype set on a SecureFile, invoke OCILobSetContentType() with contenttypep set to (oratext *)0 and contenttypelen set to 0.

26.3.35 OCILobSetOptions()

Enables option settings for a SecureFile LOB.

Purpose

Enables option settings for a SecureFile LOB.

Syntax

sword OCILobSetOptions ( OCISvcCtx       *svchp,
                         OCIError        *errhp,
                         OCILobLocator   *locp,
                         ub4              option_types,
                         void            *optionsp,
                         ub4              optionslen,
                         ub4              mode );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

The LOB locator that uniquely references the LOB. This locator must have been a locator that was obtained from the server specified by svchp.

option_types (IN)

You can specify multiple option types and values by using the bit-wise inclusive OR ("|"). An error results if you specify an option_types value that is not enabled on the LOB column.

  • Compression —OCI_LOB_OPT_COMPRESS

  • Encryption — OCI_LOB_OPT_ENCRYPT

  • Deduplication —OCI_LOB_OPT_DEDUPLICATE

  • Allocation size — OCI_LOB_OPT_ALLOCSIZE

  • Content type — OCI_LOB_OPT_CONTENTTYPE

  • Modification time — OCI_LOB_OPT_MODTIME

optionsp (IN)

The possible settings are:

  • OCI_LOB_OPT_COMPRESS_OFF

  • OCI_LOB_OPT_COMPRESS_ON

  • OCI_LOB_ENCRYPT_OFF

  • OCI_LOB_ENCRYPT_ON

  • OCI_LOB_OPT_DEDUPLICATE_OFF

  • OCI_LOB_OPT_DEDUPLICATE_ON

optionslen (IN)

The length of the value in optionsp. Note that the only valid length at this time is sizeof(ub4).

mode (IN)

Reserved for future use. Pass in 0.

26.3.36 OCILobTrim2()

Truncates the LOB value to a shorter length. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobTrim2 ( OCISvcCtx       *svchp,
                    OCIError        *errhp,
                    OCILobLocator   *locp,
                    oraub8           newlen );

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

An internal LOB locator that uniquely references the LOB. This locator must have been a locator that was obtained from the server specified by svchp.

newlen (IN)

The new length of the LOB value, which must be less than or equal to the current length. For character LOBs, it is the number of characters; for binary LOBs and BFILEs, it is the number of bytes in the LOB.

Comments

This function trims the LOB data to a specified shorter length. The function returns an error if newlen is greater than the current LOB length. This function is valid only for internal LOBs. BFILEs are not allowed.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

26.3.37 OCILobWrite2()

Writes a buffer into a LOB. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobWrite2 ( OCISvcCtx       *svchp,
                     OCIError        *errhp,
                     OCILobLocator   *locp,
                     oraub8          *byte_amtp,
                     oraub8          *char_amtp,
                     oraub8           offset,
                     void            *bufp, 
                     oraub8           buflen,
                     ub1              piece,
                     void            *ctxp, 
                     OCICallbackLobWrite2 (cbfp)
                                     (
                                       void     *ctxp,
                                       void     *bufp,
                                       oraub8   *lenp,
                                       ub1      *piecep
                                       void    **changed_bufpp,
                                       oraub8   *changed_lenp
                                     ) 
                     ub2              csid,
                     ub1              csfrm );

Parameters

svchp (IN/OUT)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

An internal LOB locator that uniquely references the LOB. This locator must have been a locator that was obtained from the server specified by svchp.

byte_amtp (IN/OUT)

IN - The number of bytes to write to the database. Always used for BLOB. For CLOB and NCLOB it is used only when char_amtp is zero.

OUT - The number of bytes written to the database. In polling mode, it is the length of the piece, in bytes, just written.

char_amtp (IN/OUT)

IN - The maximum number of characters to write to the database. Ignored for BLOB.

OUT - The number of characters written to the database. Undefined for BLOB. In polling mode, it is the length of the piece, in characters, just written.

offset (IN)

On input, it is the absolute offset from the beginning of the LOB value. For character LOBs, it is the number of characters from the beginning of the LOB; for binary LOBs, it is the number of bytes. The first position is 1.

If you use streaming (by polling or a callback), specify the offset in the first call; in subsequent polling calls, the offset parameter is ignored. When you use a callback, there is no offset parameter.

bufp (IN)

The pointer to a buffer from which the piece is written. The length of the data in the buffer is assumed to be the value passed in buflen. Even if the data is being written in pieces using the polling method, bufp must contain the first piece of the LOB when this call is invoked. If a callback is provided, bufp must not be used to provide data or an error results.

buflen (IN)

The length, in bytes, of the data in the buffer. This value differs from the char_amtp value for CLOBs and NCLOBs when the amount is specified in terms of characters using the char_amtp parameter, and the buflen parameter is specified in terms of bytes.

Note:

This parameter assumes an 8-bit byte. If your operating system uses a longer byte, you must adjust the value of buflen accordingly.

piece (IN)

Which piece of the buffer is being written. The default value for this parameter is OCI_ONE_PIECE, indicating that the buffer is written in a single piece.

The following other values are also possible for piecewise or callback mode: OCI_FIRST_PIECE, OCI_NEXT_PIECE, and OCI_LAST_PIECE.

ctxp (IN)

The context for the callback function. Can be NULL.

cbfp (IN)

A callback that can be registered to be called for each piece in a piecewise write. If this is NULL, the standard polling method is used.

The callback function must return OCI_CONTINUE for the write to continue. If any other error code is returned, the LOB write is terminated. The callback takes the following parameters:

ctxp (IN)

The context for the callback function. Can be NULL.

bufp (IN/OUT)

A buffer pointer for the piece. This is the same as the bufp passed as an input to the OCILobWrite() routine.

lenp (IN/OUT)

The length (in bytes) of the data in the buffer (IN), and the length (in bytes) of the current piece in bufp (OUT).

piecep (OUT)

Which piece: OCI_NEXT_PIECE or OCI_LAST_PIECE.

changed_bufpp (OUT)

The callback function can put the address of a new buffer if it prefers to use a new buffer for next piece to read. The default old buffer bufp is used if this parameter is set to NULL.

changed_lenp (OUT)

Length of the new buffer, if provided.

csid (IN)

The character set ID of the data in the buffer. If this value is 0, then csid is set to the client's NLS_LANG or NLS_CHAR value, depending on the value of csfrm.

csfrm (IN)

The character set form of the buffer data. The csfrm parameter must be consistent with the type of the LOB.

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID

  • SQLCS_NCHAR - NCHAR character set ID

The default value is SQLCS_IMPLICIT.

Comments

Writes a buffer into an internal LOB as specified. If LOB data exists, it is overwritten with the data stored in the buffer. The buffer can be written to the LOB in a single piece with this call, or it can be provided piecewise using callbacks or a standard polling method.

Note:

When you read or write LOBs, specify a character set form (csfrm) that matches the form of the locator itself.

When you use the polling mode for OCILobWrite2(), the first call must specify values for offset, byte_amtp, and char_amtp, but on subsequent polling calls to OCILobWrite2(), you need not specify these values.

If the value of the piece parameter is OCI_FIRST_PIECE, data may need to be provided through callbacks or polling.

If a callback function is defined in the cbfp parameter, then this callback function is invoked to get the next piece after a piece is written to the pipe. Each piece is written from bufp. If no callback function is defined, then OCILobWrite2() returns the OCI_NEED_DATA error code. The application must call OCILobWrite2() again to write more pieces of the LOB. In this mode, the buffer pointer and the length can be different in each call if the pieces are of different sizes and from different locations.

A piece value of OCI_LAST_PIECE terminates the piecewise write, regardless of whether the polling or callback method is used.

If the amount of data passed to the database (through either input mechanism) is less than the amount specified by the byte_amtp or the char_amtp parameter, an ORA-22993 error is returned.

This function is valid for internal LOBs only. BFILEs are not allowed, because they are read-only. If the LOB is a BLOB, the csid and csfrm parameters are ignored.

If both byte_amtp and char_amtp are set to point to zero amount, and OCI_FIRST_PIECE is given as input, then polling mode is assumed and data is written until you specify OCI_LAST_PIECE. For CLOBs and NCLOBs, byte_amtp and char_amtp return the data written by each piece in terms of number of bytes and number of characters respectively. For BLOBs, byte_amtp returns the number of bytes written by each piece, whereas char_amtp is undefined on output.

To write data in UTF-16 format, set the csid parameter to OCI_UTF16ID. If the csid parameter is set, it overrides the NLS_LANG environment variable.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.

See Also:

26.3.38 OCILobWriteAppend2()

Writes data starting at the end of a LOB. This function must be used for LOBs of size greater than 4 GB.

Purpose

You can also use this function for LOBs smaller than 4 GB.

Syntax

sword OCILobWriteAppend2 ( OCISvcCtx            *svchp,
                           OCIError             *errhp,
                           OCILobLocator        *locp,
                           oraub8               *byte_amtp,
                           oraub8               *char_amtp,
                           void                 *bufp, 
                           oraub8                buflen, 
                           ub1                   piece, 
                           void                 *ctxp, 
                           OCICallbackLobWrite2 (cbfp)
                                         (
                                           void     *ctxp,
                                           void     *bufp,
                                           oraub8   *lenp,
                                           ub1      *piecep
                                           void    **changed_bufpp,
                                           oraub8   *changed_lenp
                                          ) 
                           ub2                   csid, 
                           ub1                   csfrm);

Parameters

svchp (IN)

The service context handle.

errhp (IN/OUT)

An error handle that you can pass to OCIErrorGet() for diagnostic information when there is an error.

locp (IN/OUT)

An internal LOB locator that uniquely references a LOB.

byte_amtp (IN/OUT)

IN - The number of bytes to write to the database. Used for BLOB. For CLOB and NCLOB it is used only when char_amtp is zero.

OUT - The number of bytes written to the database.

char_amtp (IN/OUT)

IN - The maximum number of characters to write to the database. Ignored for BLOB.

OUT - The number of characters written to the database. Undefined for BLOB.

bufp (IN)

The pointer to a buffer from which the piece is written. The length of the data in the buffer is assumed to be the value passed in buflen. Even if the data is being written in pieces, bufp must contain the first piece of the LOB when this call is invoked. If a callback is provided, bufp must not be used to provide data or an error results.

buflen (IN)

The length, in bytes, of the data in the buffer. Note that this parameter assumes an 8-bit byte. If your operating system uses a longer byte, the value of buflen must be adjusted accordingly.

piece (IN)

Which piece of the buffer is being written. The default value for this parameter is OCI_ONE_PIECE, indicating that the buffer is written in a single piece. The following other values are also possible for piecewise or callback mode: OCI_FIRST_PIECE, OCI_NEXT_PIECE, and OCI_LAST_PIECE.

ctxp (IN)

The context for the callback function. Can be NULL.

cbfp (IN)

A callback that can be registered to be called for each piece in a piecewise write. If this is NULL, the standard polling method is used. The callback function must return OCI_CONTINUE for the write to continue. If any other error code is returned, the LOB write is terminated. The callback takes the following parameters:

ctxp (IN)

The context for the callback function. Can be NULL.

bufp (IN/OUT)

A buffer pointer for the piece.

lenp (IN/OUT)

The length (in bytes) of the data in the buffer (IN), and the length (in bytes) of the current piece in bufp (OUT).

piecep (OUT)

Which piece: OCI_NEXT_PIECE or OCI_LAST_PIECE.

changed_bufpp (OUT)

The callback function can put the address of a new buffer if it prefers to use a new buffer for next piece to be written. The default old buffer bufp is used if this parameter is set to NULL.

changed_lenp (OUT)

Length of the new buffer, if provided.

csid (IN)

The character set ID of the buffer data.

csfrm (IN)

The character set form of the buffer data.

The csfrm parameter has two possible nonzero values:

  • SQLCS_IMPLICIT - Database character set ID

  • SQLCS_NCHAR - NCHAR character set ID

The default value is SQLCS_IMPLICIT.

Comments

The buffer can be written to the LOB in a single piece with this call, or it can be provided piecewise using callbacks or a standard polling method. If the value of the piece parameter is OCI_FIRST_PIECE, data must be provided through callbacks or polling. If a callback function is defined in the cbfp parameter, then this callback function is invoked to get the next piece after a piece is written to the pipe. Each piece is written from bufp. If no callback function is defined, then OCILobWriteAppend2() returns the OCI_NEED_DATA error code.

The application must call OCILobWriteAppend2() again to write more pieces of the LOB. In this mode, the buffer pointer and the length can be different in each call if the pieces are of different sizes and from different locations. A piece value of OCI_LAST_PIECE terminates the piecewise write.

The OCILobWriteAppend2() function is not supported if LOB buffering is enabled.

If the LOB is a BLOB, the csid and csfrm parameters are ignored.

If both byte_amtp and char_amtp are set to point to zero amount and OCI_FIRST_PIECE is given as input, then polling mode is assumed and data is written until you specify OCI_LAST_PIECE. For CLOBs and NCLOBs, byte_amtp and char_amtp return the data written by each piece in terms of number of bytes and number of characters respectively. For BLOBs, byte_amtp returns the number of bytes written by each piece whereas char_amtp is undefined on output.

It is not mandatory that you wrap this LOB operation inside the open or close calls. If you did not open the LOB before performing this operation, then the functional and domain indexes on the LOB column are updated during this call. However, if you did open the LOB before performing this operation, then you must close it before you commit your transaction. When an internal LOB is closed, it updates the functional and domain indexes on the LOB column.

If you do not wrap your LOB operations inside the open or close API, then the functional and domain indexes are updated each time you write to the LOB. This can adversely affect performance. If you have functional or domain indexes, Oracle recommends that you enclose write operations to the LOB within the open or close statements.