|
|
|
|
|
|
Message Queuing Bridge MESSAGES
MESSAGES 1600-1699
|
1600 |
ERROR: Memory allocation failure |
|
|
Description |
The TMQFORWARD_BMQ process failed to allocate initial memory for storing the queue list. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), malloc(3) in UNIX system reference manuals |
|
|
1601 |
ERROR: realloc() failed |
|
|
Description |
The TMQFORWARD_BMQ process failed to allocate additional memory for storing the queue list. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), realloc(3) in UNIX system reference manuals |
|
|
1602 |
ERROR: -b option not specified |
|
|
Description |
The -b option is a required option for both TMQUEUE_BMQ and TMQFORWARD_BMQ servers and was not specified in the command line options. The server will not boot. |
|
|
Action |
Change the server command line options, CLOPT, for either TMQUEUE_BMQ or TMQFORWARD_BMQ to include -b option with a valid BEA MessageQ Bus ID. |
|
|
See Also |
TMQFORWARD_BMQ(5), TMQUEUE_BMQ(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
1603 |
ERROR: -g option not specified |
|
|
Description |
The -g option is a required option for both TMQUEUE_BMQ and TMQFORWARD_BMQ servers and was not specified in the command line options. The server will not boot. |
|
|
Action |
Change the server command line options, CLOPT, for either TMQUEUE_BMQ or TMQFORWARD_BMQ to include -g option with a valid BEA MessageQ Group ID. |
|
|
See Also |
TMQFORWARD_BMQ(5), TMQUEUE_BMQ(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT. |
|
|
1604 |
ERROR: -i option ignored as argument must be numeric |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1604. |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1604. |
|
|
See Also |
TMQFORWARD(5) |
|
|
1605 |
ERROR: -i option ignored as argument is too large |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1605. |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1605. |
|
|
See Also |
TMQFORWARD(5) |
|
|
1606 |
WARN: Invalid command line argument 'opt' ignored |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1606 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1606 |
|
|
See Also |
TMQFORWARD_BMQ(5) |
|
|
1607 |
ERROR: -q option not specified |
|
|
Description |
The -q option is a required option for the TMQFORWARD_BMQ server and was not specified in the command line options. The server will not boot. |
|
|
Action |
Change the server command line options, CLOPT, for the TMQFORWARD_BMQ to include -q option with a list of one or more BEA MessageQ queue identifiers or queue names for which the server will forward queued messages. |
|
|
See Also |
TMQFORWARD_BMQ(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT. |
|
|
1612 |
ERROR: Must not advertise services |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1612 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1612 |
|
|
See Also |
TMQFORWARD(5), buildserver(1), tmconfig(1), ubbconfig(1) |
|
|
1615 |
WARN: Dropping message received |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1615 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1615 |
|
|
See Also |
TMQFORWARD(5), tmadmin(1) |
|
|
1618 |
ERROR: tpalloc() failed - server exiting |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1618 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1618 |
|
|
See Also |
TMQFORWARD(5) |
|
|
1619 |
ERROR: tprealloc() failed - server exiting |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1619 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1619 |
|
|
See Also |
TMQFORWARD(5) |
|
|
1620 |
ERROR:_tpalloc() failed - server exiting |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1620 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1620 |
|
|
See Also |
TMQFORWARD(5) |
|
|
1622 |
WARN: Unable to enqueue failure message, diagnostic |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1622 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1622 |
|
|
See Also |
TMQFORWARD(5) |
|
|
1627 |
WARN: Invalid command line argument 'opt' ignored |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1627 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1627 |
|
|
See Also |
TMQUEUE_BMQ(5) |
|
|
1631 |
WARN: TMQUEUE_BMQ received the wrong buffer type - type |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1631 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1631 |
|
|
See Also |
TMQUEUE(5), tpcall(3), tpconnect(3), tpdequeue(3), tpenqueue(3) |
|
|
1632 |
ERROR: WARN: [TMQUEUE_BMQ received a buffer for other than ENQUEUE or DEQUEUE, opcode opcode] |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1632 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1632 |
|
|
See Also |
TMQUEUE(5) |
|
|
1633 |
ERROR: [Failed to get field fieldname from operation message] |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1633 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1633 |
|
|
See Also |
qmadmin(1) |
|
|
1634 |
ERROR: WARN: [Failed to set field fieldname in operation message] |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1634 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1634 |
|
|
See Also |
TMQUEUE(5), tpdequeue(3), tpenqueue(3) |
|
|
1636 |
ERROR: tprealloc() failed - server exiting |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1636 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1636 |
|
|
See Also |
TMQUEUE(5) |
|
|
1637 |
ERROR: TMQUEUE_BMQ cannot be a conversational server |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1637 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1637 |
|
|
See Also |
TMQUEUE(5), tmconfig(1), ubbconfig(5) |
|
|
1646 |
ERROR: Unable to determine license level |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1646 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1646 |
|
|
See Also |
||
|
1647 |
ERROR: No license for /Q |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1647 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1647 |
|
|
See Also |
||
|
1648 |
ERROR: Unable to determine license level |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1648 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1648 |
|
|
See Also |
||
|
1649 |
ERROR: No license for /Q |
|
|
Description |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1649 |
|
|
Action |
See BEA TUXEDO System Message Manual, Vol. 2, LIBQM 1649 |
|
|
See Also |
||
|
1653 |
ERROR: Can not resize a Composite Buffer |
|
|
Description |
The TMQFORWARD_BMQ process failed to allocate additional memory for expanding TUXEDO message buffer. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), realloc(3) in UNIX system reference manuals |
|
|
3000 |
ERROR: BEA MessageQ can not send message larger than nbyte bytes |
|
|
Description |
The message size is larger than the smaller of the BEA MessageQ absolute maximum message size which is 4M bytes or the current configured maximum message size defined in the BEA MessageQ group initialization file. |
|
|
Action |
If message size is smaller than 4M then re-configure the current configured maximum message size defined in the BEA MessageQ group initialization file. |
|
|
See Also |
BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT. |
|
|
3001 |
ERROR: Can not get group detail info from BEA MessageQ, local group id group_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ can not get the detailed info about the local BEA MessageQ group from dmqgcp process. |
|
|
Action |
Verify in the ubbconfig file the BEA MessageQ Bus ID and the BEA MessageQ Group ID is set correctly in the CLOPT field for the server and then check if the local BEA MessageQ group is running or not. |
|
|
See Also |
TMQUEUE_BMQ(5), TMQFORWARD_BMQ(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3003 |
ERROR: BEA MessageQ (pams_put_msg) returned PAMS status info errno, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_put_msg). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3004 |
ERROR: BEA MessageQ (pams_put_msg) returned PAMS status info errno, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status of PAMS__SUCCESS but an unsuccessful status from the PAMS Status Block when issuing BEA MessageQ API (pams_put_msg). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3005 |
ERROR: UNKNOWN data type received from BEA MessageQ, local group id group_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received message with an Unknown type in the Show Buffer. The current known types are PSYM_BIG_ENDIAN, PSYM_LITTLE_ENDIAN, and PSYM_FML |
|
|
Action |
Contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3006 |
ERROR: BEA MessageQ (pams_get_msg[w]) returned PAMS status info errno, local group id group_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS or PAMS__NOMOREMSG or PAMS__TIMEOUT when issuing BEA MessageQ API (pams_get_msg[w]). |
|
|
Action |
Check wherther or not the local BEA MessageQ group is running or the receiving queue is stopped and then contact BEA Customer Support through BEA WebSupport at www.beasys.com.. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3009 |
ERROR: Can not initialize the internal data cache |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ can not recover from initializing the internal data cache |
|
|
Action |
Contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
||
|
3010 |
ERROR: BEA MessageQ (pams_put_msg) returned PAMS status info errno, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_put_msg). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3011 |
ERROR: BEA MessageQ (pams_get_msgw) returned PAMS status info errno, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_get_msgw). |
|
|
Action |
Ensure that the local BEA MessageQ group is running. If the error persists, contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3012 |
ERROR: BEA MessageQ (pams_locate_q) returned PAMS status info errno, local group id group_id, queue name queue_name |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_locate_q). |
|
|
Action |
Ensure that the local BEA MessageQ group is running. If the error persists, contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3013 |
ERROR: Can not attach to BB |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ did not attach to BEA TUXEDO Bulletin Board |
|
|
Action |
Check the TUXEDO userlog for earlier messages indicating the cause of the failure and then contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
||
|
3014 |
ERROR:Can not get authentication info |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received an error when calling tpchkauth(). |
|
|
Action |
||
|
See Also |
tpchkauth(3) |
|
|
3016 |
ERROR: -U Username is required in TUXEDO security environment |
|
|
Description |
The -U option is a required option for the TMQFORWARD_BMQ and TMQUEUE_BMQ servers when BEA TUXEDO is running in "TPAPPAUTH" security mode. |
|
|
Action |
Change the server command line options, CLOPT, for the TMQFORWARD_BMQ and/or TMQUEUE_BMQ to include -U option with a valid user name. |
|
|
See Also |
TMQFORWARD_BMQ(5), TMQUEUE_BMQ(5), ubbconfig(5), tpaddusr(1) |
|
|
3018 |
ERROR: Can not locate BEA MessageQ queue name queue_name |
|
|
Description |
TMQFORWARD_BMQ can not translate qname into its BEA MessageQ queue identifier in the BEA MessageQ process cache, group cache and global name space respectively. |
|
|
Action |
Check BEA MessageQ group initialization file for naming configuration |
|
|
See Also |
TMQFORWARD_BMQ(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3019 |
ERROR: BEA MessageQ Q(queue name) group_id.queue_id is not on the local GROUP(group_id) |
|
|
Description |
TMQFORWARD_BMQ can not attach to queue name which is belonging to the remove BEA MessageQ group group_id. |
|
|
Action |
Check BEA MessageQ group initialization file for naming configuration |
|
|
See Also |
TMQFORWARD_BMQ(5), ubbconfig(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3020 |
ERROR: Received an unknown BEA MessageQ group detail message, local group id group_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ expected to receive an BEA MessageQ group detail message and instead it received an unknown message. |
|
|
Action |
Contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
||
|
3021 |
ERROR: Can not attach to BEA MessageQ Q(queue name) group_id.queue_id |
|
|
Description |
TMQFORWARD_BMQ can not attach to the queue identified by the queue name in the queue list |
|
|
Action |
Check the BEA MessageQ group initialization file for queue name error or queue configuration error and then check if the local BEA MessageQ group is running and then contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT. |
|
|
3023 |
ERROR: BEA MessageQ (pams_attach_q) returned PAMS status info errno, local group id group_id, queue id/name queue_id_or_name |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (p ams_attach_q). |
|
|
Action |
Check the BEA MessageQ group initialization file for queue name error or queue configuration error and then check if the local BEA MessageQ group is running and then contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Programmer's Guide, BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3024 |
ERROR: Can not get appkey |
|
|
Description |
The user name and/or group name in the command line options, CLOPT, for the TMQUEUE_BMQ and TMQFORWARD_BMQ servers can not translate into a valid TUXEDO application key when TUXEDO is running in TPAPPAUTH mode. |
|
|
Action |
Check the TUXEDO user and group files. |
|
|
See Also |
tpusradd(1), tpgrpadd(1), AUTHSVR(5), TUXEDO Administration Guide. |
|
|
3025 |
ERROR: TMQUEUE_BMQ can not be in transaction |
|
|
Description |
TMQUEUE_BMQ does not support transaction |
|
|
Action |
Set TPNOTRAN in flags of tpenqueue() and tpdequeue() |
|
|
See Also |
TMQUEUE_BMQ(5) |
|
|
3027 |
ERROR: Queue name length can not exceed 15 characters |
|
|
Description |
The maximum length for the queue name is 15 characters |
|
|
Action |
Reduce the queue name length to lesser than 16 characters |
|
|
See Also |
tpenqueue(3), tpdequeue(3) |
|
|
3028 |
ERROR: Memory allocation failure |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ process failed to allocate initial memory for storing internal cache. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), malloc(3) in UNIX system reference manuals |
|
|
3029 |
ERROR: Memory allocation failure |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ process failed to allocate initial memory for storing internal cache. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), malloc(3) in UNIX system reference manuals |
|
|
3030 |
ERROR: Can not re-allocate memory |
|
|
Description |
The TMQFORWARD_BMQ process failed to allocate additional memory for storing the internal cache. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), realloc(3) in UNIX system reference manuals |
|
|
3032 |
ERROR: It is not the local BEA MesageQ queue, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQUEUE_BMQ can not detach from queue which is belonging to the remove BEA MessageQ group. |
|
|
Action |
Contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
||
|
3033 |
ERROR: BEA MessageQ (pams_detach_q) returned PAMS status info errno |
|
|
Description |
TMQFORWARD_BMQ or TMQUEUE_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_detach_q). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3034 |
ERROR: BEA MessageQ does not support TPQTIME_ABS and TPQTIME_REL |
|
|
Description |
BEA MessageQ does not support TPQTIME_ABS and TPQTIME_REL |
|
|
Action |
If possible, avoid the use of unsupported values for the flags parameter of the tpqctl_t structure for tpenqueue |
|
|
See Also |
tpenqueue(3), TMQUEUE_BMQ(5), TMQFORWARD_BMQ(5) |
|
|
3035 |
ERROR: BEA MessageQ does not support TPQBEFOREMSGID |
|
|
Description |
BEA MessageQ does not support TPQBEFOREMSGID |
|
|
Action |
If possible, avoid the use of unsupported values for the flags parameter of the tpqctl_t structure for tpenqueue |
|
|
See Also |
tpenqueue(3), TMQUEUE_BMQ(5), TMQFORWARD_BMQ(5) |
|
|
3036 |
ERROR: BEA MessageQ does not support TPQTOP |
|
|
Description |
BEA MessageQ does not support TPQTOP |
|
|
Action |
If possible, avoid the use of unsupported values for the flags parameter of the tpqctl_t structure for tpenqueue |
|
|
See Also |
tpenqueue(3), TMQUEUE_BMQ(5), TMQFORWARD_BMQ(5) |
|
|
3037 |
ERROR: BEA MessageQ does not support selection by TPQGETBYMSGID and TPQGETBYCORRID |
|
|
Description |
BEA MessageQ does not support selection by TPQGETBYMSGID and TPQGETBYCORRID |
|
|
Action |
If possible, avoid the use of unsupported values for the flags parameter of the tpqctl structure for tpdequeue |
|
|
See Also |
tpdequeue(3) |
|
|
3038 |
ERROR: TMQFORWARD_BMQ got message from UNKNOWN queue name, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
TMQFORWARD_BMQ received a message from a queue which is not among the queue from the queue list |
|
|
Action |
Contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
||
|
3039 |
ERROR: BEA MessageQ Queue ID exceeds maximum user queue number |
|
|
Description |
BEA MessageQ Queue ID exceeds maximum user queue number |
|
|
Action |
Check the queue name format |
|
|
See Also |
||
|
3040 |
ERROR: It is not the local BEA MesageQ queue, local group id group_id, group id group_id, queue id queue_id |
|
|
Description |
MQFORWARD_BMQ or TMQUEUE_BMQ can not attach to a queue which is belonging to the remove BEA MessageQ group. |
|
|
Action |
Check BEA MessageQ group initialization file for naming configuration |
|
|
See Also |
TMQUEUE_BMQ(50), TMQFORWARD_BMQ(5), ubbconfig(5), BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3041 |
ERROR: BEA MessageQ (pams_set_select) returned PAMS status info errno, local group id group_id |
|
|
Description |
TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_set_select). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3042 |
ERROR: BEA MessageQ (pams_set_select) returned PAMS status info errno, local group id group_id |
|
|
Description |
TMQUEUE_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_set_select). |
|
|
Action |
If problem persists, examine relevant log files. |
|
|
See Also |
BEA MessageQ Programmer's Guide |
|
|
3043 |
ERROR: Can not allocate memory |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ process failed to allocate memory for storing incoming message. |
|
|
Action |
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. |
|
|
See Also |
mc(1), malloc(3) in UNIX system reference manuals |
|
|
3044 |
ERROR: -R option ignored as argument must be numeric |
|
|
Description |
The argument for the -R option on the command line for TMQFORWARD_BMQ is non-numeric and is ignored. The default retry value is 0. |
|
|
Action |
Change the server command line options, CLOPT, for theTMQFORWARD_BMQ server such that the argument for the -R is a numeric value indicating the number of retry time the TMQFORWARD_BMQ will send the message to the TUXEDO server. |
|
|
See Also |
TMQFORWARD_BMQ(5) |
|
|
3045 |
ERROR: -R option ignored as argument is too large |
|
|
Description |
The numeric argument for the -R option on the command line for TMQFORWARD_BMQ is too large and is ignored. The default retry value is 0. |
|
|
Action |
Change the server command line options, CLOPT, for the TMQFORWARD_BMQ server such that the argument for the -R option is a numeric value less than 2147483648. |
|
|
See Also |
TMQFORWARD_BMQ(5) |
|
|
3046 |
WARN: Convert TUXEDO message type from type <type> and subtype <subtype> into CARRAY |
|
|
Description |
For a TUXEDO message which has a buffer type other than FML32 and CARRAY, TMQUEUE_BMQ and TMQFORWARD_BMQ will convert it into a TUXEDO CARRAY message if the sending machine has different machine type than the receiving machine in the TUXEDO ubbconfig file. |
|
|
Action |
||
|
See Also |
||
|
3047 |
ERROR: BEA MessageQ (pams_attach_q) returned PAMS status info errno, local group id group_id |
|
|
Description |
TMQUEUE_BMQ or TMQFORWARD_BMQ received returned status other than PAMS__SUCCESS when issuing BEA MessageQ API (pams_attach_q). |
|
|
Action |
Check the BEA MessageQ group initialization file for queue name error or queue configuration error and then check if the local BEA MessageQ group is running and then contact BEA Customer Support through BEA WebSupport at www.beasys.com. |
|
|
See Also |
BEA MessageQ Programmer's Guide, BEA MessageQ Installation and Configuration for UNIX, BEA MessageQ Installation and Configuration for Windows NT |
|
|
3048 |
ERROR: Queue name length can not exceed 15 characters |
|
|
Description |
The maximum length for the queue name is 15 characters |
|
|
Action |
Reduce the queue name length to lesser than 16 characters |
|
|
See Also |
tpenqueue(3), tpdequeue(3) |
|
|
3049 |
ERROR: BEA MessageQ Queue ID exceeds maximum user queue number |
|
|
Description |
BEA MessageQ Queue ID exceeds maximum user queue number |
|
|
Action |
Check the queue name format |
|
|
See Also |
||
|
3050 |
ERROR: TMQUEUE_BMQ can not be in transaction |
|
|
Description |
TMQUEUE_BMQ does not support transaction |
|
|
Action |
Set TPNOTRAN in flags of tpenqueue() and tpdequeue() |
|
|
See Also |
TMQUEUE_BMQ(5) |
|
|
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|