Table 78-1 WTCLocalTuxDom attributes
Attribute
|
Description
|
Range of Values and Default
|
AccessPoint
|
Defines a name used to identify a local Tuxedo access point in a WTC Service. This name must be unique within defined Local Tuxedo Access Points. This allows you to define unique configurations having the same Access Point ID.
|
Admin Console field label: Access Point
|
AccessPointId
|
Defines the connection name used to identify this local Tuxedo access point when attempting to establish a session connection with a remote Tuxedo access point.
The AccessPointId of a WTCLocalTuxDom MBean must match the corresponding DOMAINID in the *DM_REMOTE_DOMAINS section of your Tuxedo DMCONFIG file.
|
Admin Console field label: Access Point ID
|
BlockTime
|
Defines the maximum wait time (seconds) allowed for a blocking call.
|
Admin Console field label: Blocking Time Out
Default: 60
Minimum: 0
Maximum: 231-1
|
CmpLimit
|
Defines the compression threshold used when sending data to a remote Tuxedo access point. Application buffers larger than this size are compressed.
|
Admin Console field label: Compression Limit
Default: 231-1
Minimum: 0
Maximum: 231-1
|
ConnPrincipalName
|
Defines the principal name used to verify the identity of this domain when establishing a connection to another domain.
Note: ConnectionPrincipalName is not supported in this release.
|
Admin Console field label: Connection Principal Name
Required: no
|
ConnectionPolicy
|
Defines the conditions under which a local Tuxedo access point tries to establish a connection to a remote Tuxedo access point.
ON_STARTUP: A domain gateway attempts to establish a connection with its remote Tuxedo access points at gateway server initialization time. Remote services (services advertised in JNDI by the domain gateway for this local access point) are advertised only if a connection is successfully established to that remote Tuxedo access point. If there is no active connection to a remote Tuxedo access point, then the remote services are suspended. By default, this connection policy retries failed connections every 60 seconds. Use the MaxRetry and RetryInterval attributes to specify application specific values.
|
Admin Console field label: Connection Policy
Required: no
Default: ON_DEMAND
|
Interoperate
|
Specifies whether the local domain interoperates with remote Tuxedo access points that are based upon Tuxedo release 6.5. If Yes, the local Tuxedo access point interoperates with a Tuxedo 6.5 domain.
|
Admin Console field label: Interoperate
Required: no
Default: No
|
MaxEncryptBits
|
Defines the maximum encryption key length (in bits) used when establishing a network connection for a local Tuxedo access point.
|
Admin Console field label: Max Encryption Level
Required: no
Default: 128
Secure value: "128"
|
MaxRetries
|
Defines the number of times that a domain gateway tries to establish connections to remote Tuxedo access points. Use only when Connection Policy is set to ON_STARTUP.
|
Admin Console field label: Max Retries
Default: 263-1
Minimum: 0
Maximum: 263-1
|
MinEncryptBits
|
Defines the minimum encryption key length (in bits) used when establishing a network connection for a local Tuxedo access point.
|
Admin Console field label: Min Encryption Level
Required: no
Default: 0
Secure value: "40"
|
NWAddr
|
Defines the network address of the local Tuxedo access point. Specify the TCP/IP address in one of the following formats:
If the hostname is used, the access point finds an address for hostname using the local name resolution facilities (usually DNS). If dotted decimal format is used, each # should be a number from 0 to 255. This dotted decimal number represents the IP address of the local machine. The port_number is the TCP port number at which the access point listens for incoming requests.
|
Admin Console field label: Network Address
Required: no
|
Name
|
The name of this configuration. WebLogic Server uses an MBean to implement and persist the configuration.
|
Required: no
|
Notes
|
Optional information that you can include to describe this configuration.
|
Required: no
|
RetryInterval
|
Defines the number of seconds between automatic attempts to establish a connection to remote Tuxedo access points. Use only when Connection Policy is set to ON_STARTUP.
|
Admin Console field label: Retry Interval
Default: 60
Minimum: 0
Maximum: 231-1
|
Security
|
Defines the type of application security enforced.
|
Admin Console field label: Security
Required: no
Default: NONE
Secure value: "DM_PW"
|