javax.media.j3d
Class Texture

java.lang.Object
  |
  +--javax.media.j3d.SceneGraphObject
        |
        +--javax.media.j3d.NodeComponent
              |
              +--javax.media.j3d.Texture
Direct Known Subclasses:
Texture2D, Texture3D, TextureCubeMap

public abstract class Texture
extends NodeComponent

The Texture object is a component object of an Appearance object that defines the texture properties used when texture mapping is enabled. The Texture object is an abstract class and all texture objects must be created as either a Texture2D object or a Texture3D object.

Each Texture object has the following properties:

See Also:
Canvas3D.queryProperties()

Field Summary
static int ALLOW_ANISOTROPIC_FILTER_READ
          Specifies that this Texture object allows reading its anistropic filter information (e.g., anisotropic mode, anisotropic filter)
static int ALLOW_BOUNDARY_COLOR_READ
          Specifies that this Texture object allows reading its boundary color information.
static int ALLOW_BOUNDARY_MODE_READ
          Specifies that this Texture object allows reading its boundary mode information.
static int ALLOW_ENABLE_READ
          Specifies that this Texture object allows reading its enable flag.
static int ALLOW_ENABLE_WRITE
          Specifies that this Texture object allows writing its enable flag.
static int ALLOW_FILTER_READ
          Specifies that this Texture object allows reading its filter information.
static int ALLOW_FILTER4_READ
          Specifies that this Texture object allows reading its filter4 function information.
static int ALLOW_FORMAT_READ
          Specifies that this Texture object allows reading its format information.
static int ALLOW_IMAGE_READ
          Specifies that this Texture object allows reading its image component information.
static int ALLOW_IMAGE_WRITE
          Specifies that this Texture object allows writing its image component information.
static int ALLOW_LOD_RANGE_READ
          Specifies that this Texture object allows reading its LOD range information (e.g., base level, maximum level, minimum lod, maximum lod, lod offset)
static int ALLOW_LOD_RANGE_WRITE
          Specifies that this Texture object allows writing its LOD range information (e.g., base level, maximum level, minimum lod, maximum lod, lod offset)
static int ALLOW_MIPMAP_MODE_READ
          Specifies that this Texture object allows reading its mipmap mode information.
static int ALLOW_SHARPEN_TEXTURE_READ
          Specifies that this Texture object allows reading its sharpen texture function information.
static int ALLOW_SIZE_READ
          Specifies that this Texture object allows reading its size information (e.g., width, height, number of mipmap levels, boundary width).
static int ALPHA
          Specifies Texture contains only Alpha values.
static int ANISOTROPIC_NONE
          No anisotropic filter.
static int ANISOTROPIC_SINGLE_VALUE
          Uses the degree of anisotropy in both the minification and magnification filters.
static int BASE_LEVEL
          Indicates that Texture object only has one level.
static int BASE_LEVEL_LINEAR
          Performs bilinear interpolation on the four nearest texels in level 0 texture map.
static int BASE_LEVEL_POINT
          Select the nearest texel in level 0 texture map.
static int CLAMP
          Clamps texture coordinates to be in the range [0, 1].
static int CLAMP_TO_BOUNDARY
          Clamps texture coordinates such that filtering will sample only texture boundary texels.
static int CLAMP_TO_EDGE
          Clamps texture coordinates such that filtering will not sample a texture boundary texel.
static int FASTEST
          Uses the fastest available method for processing geometry.
static int FILTER4
          Applies an application-supplied weight function on the nearest 4x4 texels in the base level texture image.
static int INTENSITY
          Specifies Texture contains only Intensity values.
static int LINEAR_SHARPEN
          Sharpens the resulting image by extrapolating from the base level plus one image to the base level image of this texture object.
static int LINEAR_SHARPEN_ALPHA
          Performs linear sharpen filter for the alpha component only.
static int LINEAR_SHARPEN_RGB
          Performs linear sharpen filter for the rgb components only.
static int LUMINANCE
          Specifies Texture contains only luminance values.
static int LUMINANCE_ALPHA
          Specifies Texture contains Luminance and Alpha values.
static int MULTI_LEVEL_LINEAR
          Performs tri-linear interpolation of texels between four texels each from two nearest mipmap levels.
static int MULTI_LEVEL_MIPMAP
          Indicates that this Texture object has multiple images, one for each mipmap level.
static int MULTI_LEVEL_POINT
          Selects the nearest texel in the nearest mipmap.
static int NICEST
          Uses the nicest available method for processing geometry.
static int RGB
          Specifies Texture contains Red, Green and Blue color values.
static int RGBA
          Specifies Texture contains Red, Green, Blue color values and Alpha value.
static int WRAP
          Repeats the texture by wrapping texture coordinates that are outside the range [0,1].
 
Constructor Summary
Texture()
          Constructs a Texture object with default parameters.
Texture(int mipMapMode, int format, int width, int height)
          Constructs an empty Texture object with specified mipMapMode, format, width and height.
Texture(int mipMapMode, int format, int width, int height, int boundaryWidth)
          Constructs an empty Texture object with specified mipMapMode, format, width, height, and boundaryWidth.
 
Method Summary
 float getAnisotropicFilterDegree()
          Retrieves the anisotropic filter degree for this texture object.
 int getAnisotropicFilterMode()
          Retrieves the anisotropic filter mode for this texture object.
 int getBaseLevel()
          Retrieves the base level for this texture object.
 void getBoundaryColor(Color4f boundaryColor)
          Retrieves the texture boundary color for this texture object.
 int getBoundaryModeS()
          Retrieves the boundary mode for the S coordinate.
 int getBoundaryModeT()
          Retrieves the boundary mode for the T coordinate.
 int getBoundaryWidth()
          Retrieves the width of the boundary of this Texture object.
 boolean getEnable()
          Retrieves the state of the texture enable flag.
 void getFilter4Func(float[] weights)
          Copies the array of filter4 function values into the specified array.
 int getFilter4FuncPointsCount()
          Retrieves the number of filter4 function values for this texture object.
 int getFormat()
          Retrieves the format of this Texture object.
 int getHeight()
          Retrieves the height of this Texture object.
 ImageComponent getImage(int level)
          Retrieves the image for a specified mipmap level.
 ImageComponent[] getImages()
          Retrieves the array of images for all mipmap levels.
 void getLodOffset(Tuple3f offset)
          Retrieves the LOD offset for this texture object.
 int getMagFilter()
          Retrieves the magnification filter.
 int getMaximumLevel()
          Retrieves the maximum level for this texture object.
 float getMaximumLOD()
          Retrieves the maximum level-of-detail for this texture object.
 int getMinFilter()
          Retrieves the minification filter.
 float getMinimumLOD()
          Retrieves the minimum level-of-detail for this texture object.
 int getMipMapMode()
          Retrieves current mipmap mode.
 void getSharpenTextureFunc(float[] lod, float[] pts)
          Copies the array of sharpen texture LOD function points into the specified arrays.
 void getSharpenTextureFunc(Point2f[] pts)
          Copies the array of sharpen texture LOD function points including the lod values and the corresponding function values into the specified array.
 int getSharpenTextureFuncPointsCount()
          Gets the number of points in the sharpen texture LOD function for this texture object.
 int getWidth()
          Retrieves the width of this Texture object.
 int numMipMapLevels()
          Retrieves the number of mipmap levels needed for this Texture object.
 void setAnisotropicFilterDegree(float degree)
          Specifies the degree of anisotropy to be used when the anisotropic filter mode specifies ANISOTROPIC_SINGLE_VALUE.
 void setAnisotropicFilterMode(int mode)
          Specifies the anisotropic filter mode for this texture object.
 void setBaseLevel(int baseLevel)
          Specifies the base level for this texture object.
 void setBoundaryColor(Color4f boundaryColor)
          Sets the texture boundary color for this texture object.
 void setBoundaryColor(float r, float g, float b, float a)
          Sets the texture boundary color for this texture object.
 void setBoundaryModeS(int boundaryModeS)
          Sets the boundary mode for the S coordinate in this texture object.
 void setBoundaryModeT(int boundaryModeT)
          Sets the boundary mode for the T coordinate in this texture object.
 void setEnable(boolean state)
          Enables or disables texture mapping for this appearance component object.
 void setFilter4Func(float[] weights)
          sets the filter4 function for this texture object.
 void setImage(int level, ImageComponent image)
          Sets the image for a specified mipmap level.
 void setImages(ImageComponent[] images)
          Sets the array of images for all mipmap levels.
 void setLodOffset(float s, float t, float r)
          Specifies the LOD offset for this texture object.
 void setLodOffset(Tuple3f offset)
          Specifies the LOD offset for this texture object.
 void setMagFilter(int magFilter)
          Sets the magnification filter function.
 void setMaximumLevel(int maximumLevel)
          Specifies the maximum level for this texture object.
 void setMaximumLOD(float maximumLod)
          Specifies the maximum level-of-detail for this texture object.
 void setMinFilter(int minFilter)
          Sets the minification filter function.
 void setMinimumLOD(float minimumLod)
          Specifies the minimum level-of-detail for this texture object.
 void setMipMapMode(int mipMapMode)
          Sets mipmap mode for texture mapping for this texture object.
 void setSharpenTextureFunc(float[] lod, float[] pts)
          sets the sharpen texture LOD function for this texture object.
 void setSharpenTextureFunc(Point2f[] pts)
          sets the sharpen texture LOD function for this texture object.
 
Methods inherited from class javax.media.j3d.NodeComponent
cloneNodeComponent, cloneNodeComponent, duplicateNodeComponent, duplicateNodeComponent, getDuplicateOnCloneTree, setDuplicateOnCloneTree
 
Methods inherited from class javax.media.j3d.SceneGraphObject
clearCapability, clearCapabilityIsFrequent, duplicateSceneGraphObject, getCapability, getCapabilityIsFrequent, getUserData, isCompiled, isLive, setCapability, setCapabilityIsFrequent, setUserData, updateNodeReferences
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

ALLOW_ENABLE_READ

public static final int ALLOW_ENABLE_READ
Specifies that this Texture object allows reading its enable flag.

See Also:
Constant Field Values

ALLOW_ENABLE_WRITE

public static final int ALLOW_ENABLE_WRITE
Specifies that this Texture object allows writing its enable flag.

See Also:
Constant Field Values

ALLOW_BOUNDARY_MODE_READ

public static final int ALLOW_BOUNDARY_MODE_READ
Specifies that this Texture object allows reading its boundary mode information.

See Also:
Constant Field Values

ALLOW_FILTER_READ

public static final int ALLOW_FILTER_READ
Specifies that this Texture object allows reading its filter information.

See Also:
Constant Field Values

ALLOW_IMAGE_READ

public static final int ALLOW_IMAGE_READ
Specifies that this Texture object allows reading its image component information.

See Also:
Constant Field Values

ALLOW_IMAGE_WRITE

public static final int ALLOW_IMAGE_WRITE
Specifies that this Texture object allows writing its image component information.

Since:
Java 3D 1.2
See Also:
Constant Field Values

ALLOW_FORMAT_READ

public static final int ALLOW_FORMAT_READ
Specifies that this Texture object allows reading its format information.

Since:
Java 3D 1.2
See Also:
Constant Field Values

ALLOW_SIZE_READ

public static final int ALLOW_SIZE_READ
Specifies that this Texture object allows reading its size information (e.g., width, height, number of mipmap levels, boundary width).

Since:
Java 3D 1.2
See Also:
Constant Field Values

ALLOW_MIPMAP_MODE_READ

public static final int ALLOW_MIPMAP_MODE_READ
Specifies that this Texture object allows reading its mipmap mode information.

See Also:
Constant Field Values

ALLOW_BOUNDARY_COLOR_READ

public static final int ALLOW_BOUNDARY_COLOR_READ
Specifies that this Texture object allows reading its boundary color information.

See Also:
Constant Field Values

ALLOW_LOD_RANGE_READ

public static final int ALLOW_LOD_RANGE_READ
Specifies that this Texture object allows reading its LOD range information (e.g., base level, maximum level, minimum lod, maximum lod, lod offset)

Since:
Java 3D 1.3
See Also:
Constant Field Values

ALLOW_LOD_RANGE_WRITE

public static final int ALLOW_LOD_RANGE_WRITE
Specifies that this Texture object allows writing its LOD range information (e.g., base level, maximum level, minimum lod, maximum lod, lod offset)

Since:
Java 3D 1.3
See Also:
Constant Field Values

ALLOW_ANISOTROPIC_FILTER_READ

public static final int ALLOW_ANISOTROPIC_FILTER_READ
Specifies that this Texture object allows reading its anistropic filter information (e.g., anisotropic mode, anisotropic filter)

Since:
Java 3D 1.3
See Also:
Constant Field Values

ALLOW_SHARPEN_TEXTURE_READ

public static final int ALLOW_SHARPEN_TEXTURE_READ
Specifies that this Texture object allows reading its sharpen texture function information.

Since:
Java 3D 1.3
See Also:
Constant Field Values

ALLOW_FILTER4_READ

public static final int ALLOW_FILTER4_READ
Specifies that this Texture object allows reading its filter4 function information.

Since:
Java 3D 1.3
See Also:
Constant Field Values

FASTEST

public static final int FASTEST
Uses the fastest available method for processing geometry. This value can be used as a parameter to setMinFilter and setMagFilter.

See Also:
setMinFilter(int), setMagFilter(int), Constant Field Values

NICEST

public static final int NICEST
Uses the nicest available method for processing geometry. This value can be used as a parameter to setMinFilter and setMagFilter.

See Also:
setMinFilter(int), setMagFilter(int), Constant Field Values

BASE_LEVEL_POINT

public static final int BASE_LEVEL_POINT
Select the nearest texel in level 0 texture map. Maps to NEAREST.

See Also:
setMinFilter(int), setMagFilter(int), Constant Field Values

BASE_LEVEL_LINEAR

public static final int BASE_LEVEL_LINEAR
Performs bilinear interpolation on the four nearest texels in level 0 texture map. Maps to LINEAR.

See Also:
setMinFilter(int), setMagFilter(int), Constant Field Values

MULTI_LEVEL_POINT

public static final int MULTI_LEVEL_POINT
Selects the nearest texel in the nearest mipmap. Maps to NEAREST_MIPMAP_NEAREST.

See Also:
setMinFilter(int), Constant Field Values

MULTI_LEVEL_LINEAR

public static final int MULTI_LEVEL_LINEAR
Performs tri-linear interpolation of texels between four texels each from two nearest mipmap levels. Maps to LINEAR_MIPMAP_LINEAR, but an implementation can fall back to LINEAR_MIPMAP_NEAREST or NEAREST_MIPMAP_LINEAR.

See Also:
setMinFilter(int), Constant Field Values

LINEAR_SHARPEN

public static final int LINEAR_SHARPEN
Sharpens the resulting image by extrapolating from the base level plus one image to the base level image of this texture object.

Since:
Java 3D 1.3
See Also:
setMagFilter(int), Constant Field Values

LINEAR_SHARPEN_RGB

public static final int LINEAR_SHARPEN_RGB
Performs linear sharpen filter for the rgb components only. The alpha component is computed using BASE_LEVEL_LINEAR filter.

Since:
Java 3D 1.3
See Also:
setMagFilter(int), Constant Field Values

LINEAR_SHARPEN_ALPHA

public static final int LINEAR_SHARPEN_ALPHA
Performs linear sharpen filter for the alpha component only. The rgb components are computed using BASE_LEVEL_LINEAR filter.

Since:
Java 3D 1.3
See Also:
setMagFilter(int), Constant Field Values

FILTER4

public static final int FILTER4
Applies an application-supplied weight function on the nearest 4x4 texels in the base level texture image.

Since:
Java 3D 1.3
See Also:
setMinFilter(int), setMagFilter(int), Constant Field Values

CLAMP

public static final int CLAMP
Clamps texture coordinates to be in the range [0, 1]. Texture boundary texels or the constant boundary color if boundary width is 0 will be used for U,V values that fall outside this range.

See Also:
Constant Field Values

WRAP

public static final int WRAP
Repeats the texture by wrapping texture coordinates that are outside the range [0,1]. Only the fractional portion of the texture coordinates is used; the integer portion is discarded.

See Also:
Constant Field Values

CLAMP_TO_EDGE

public static final int CLAMP_TO_EDGE
Clamps texture coordinates such that filtering will not sample a texture boundary texel. Texels at the edge of the texture will be used instead.

Since:
Java 3D 1.3
See Also:
Constant Field Values

CLAMP_TO_BOUNDARY

public static final int CLAMP_TO_BOUNDARY
Clamps texture coordinates such that filtering will sample only texture boundary texels. If the texture does not have a boundary, that is the boundary width is equal to 0, then the constant boundary color will be used.

Since:
Java 3D 1.3
See Also:
Constant Field Values

BASE_LEVEL

public static final int BASE_LEVEL
Indicates that Texture object only has one level. If multiple levels are needed, they will be implicitly computed.

See Also:
Constant Field Values

MULTI_LEVEL_MIPMAP

public static final int MULTI_LEVEL_MIPMAP
Indicates that this Texture object has multiple images, one for each mipmap level. In this mode, there are log2(max(width,height))+1 separate images.

See Also:
Constant Field Values

INTENSITY

public static final int INTENSITY
Specifies Texture contains only Intensity values.

See Also:
Constant Field Values

LUMINANCE

public static final int LUMINANCE
Specifies Texture contains only luminance values.

See Also:
Constant Field Values

ALPHA

public static final int ALPHA
Specifies Texture contains only Alpha values.

See Also:
Constant Field Values

LUMINANCE_ALPHA

public static final int LUMINANCE_ALPHA
Specifies Texture contains Luminance and Alpha values.

See Also:
Constant Field Values

RGB

public static final int RGB
Specifies Texture contains Red, Green and Blue color values.

See Also:
Constant Field Values

RGBA

public static final int RGBA
Specifies Texture contains Red, Green, Blue color values and Alpha value.

See Also:
Constant Field Values

ANISOTROPIC_NONE

public static final int ANISOTROPIC_NONE
No anisotropic filter.

Since:
Java 3D 1.3
See Also:
setAnisotropicFilterMode(int), Constant Field Values

ANISOTROPIC_SINGLE_VALUE

public static final int ANISOTROPIC_SINGLE_VALUE
Uses the degree of anisotropy in both the minification and magnification filters.

Since:
Java 3D 1.3
See Also:
setAnisotropicFilterMode(int), Constant Field Values
Constructor Detail

Texture

public Texture()
Constructs a Texture object with default parameters. The default values are as follows:

Note that the default constructor creates a texture object with a width and height of 0 and is, therefore, not useful.


Texture

public Texture(int mipMapMode,
               int format,
               int width,
               int height)
Constructs an empty Texture object with specified mipMapMode, format, width and height. Defaults are used for all other parameters. If mipMapMode is set to BASE_LEVEL, then the image at level 0 must be set by the application (using either the setImage or setImages method). If mipMapMode is set to MULTI_LEVEL_MIPMAP, then images for levels Base Level through Maximum Level must be set.

Parameters:
mipMapMode - type of mipmap for this Texture: one of BASE_LEVEL, MULTI_LEVEL_MIPMAP
format - data format of Textures saved in this object. One of INTENSITY, LUMINANCE, ALPHA, LUMINANCE_ALPHA, RGB, RGBA
width - width of image at level 0. Must be power of 2.
height - height of image at level 0. Must be power of 2.
Throws:
java.lang.IllegalArgumentException - if width or height are not a power of 2, or if an invalid format or mipMapMode is specified.

Texture

public Texture(int mipMapMode,
               int format,
               int width,
               int height,
               int boundaryWidth)
Constructs an empty Texture object with specified mipMapMode, format, width, height, and boundaryWidth. Defaults are used for all other parameters. If mipMapMode is set to BASE_LEVEL, then the image at level 0 must be set by the application (using either the setImage or setImages method). If mipMapMode is set to MULTI_LEVEL_MIPMAP, then images for levels Base Level through Maximum Level must be set.

Parameters:
mipMapMode - type of mipmap for this Texture: one of BASE_LEVEL, MULTI_LEVEL_MIPMAP
format - data format of Textures saved in this object. One of INTENSITY, LUMINANCE, ALPHA, LUMINANCE_ALPHA, RGB, RGBA
width - width of image at level 0. Must be power of 2. This does not include the width of the boundary.
height - height of image at level 0. Must be power of 2. This does not include the width of the boundary.
boundaryWidth - width of the boundary.
Throws:
java.lang.IllegalArgumentException - if width or height are not a power of 2, if an invalid format or mipMapMode is specified, or if the boundaryWidth < 0
Since:
Java 3D 1.3
Method Detail

setBoundaryModeS

public void setBoundaryModeS(int boundaryModeS)
Sets the boundary mode for the S coordinate in this texture object.

Parameters:
boundaryModeS - the boundary mode for the S coordinate. One of: CLAMP, WRAP, CLAMP_TO_EDGE, or CLAMP_TO_BOUNDARY.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if boundaryModeS is a value other than CLAMP, WRAP, CLAMP_TO_EDGE, or CLAMP_TO_BOUNDARY.

getBoundaryModeS

public int getBoundaryModeS()
Retrieves the boundary mode for the S coordinate.

Returns:
the current boundary mode for the S coordinate.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setBoundaryModeT

public void setBoundaryModeT(int boundaryModeT)
Sets the boundary mode for the T coordinate in this texture object.

Parameters:
boundaryModeT - the boundary mode for the T coordinate. One of: CLAMP, WRAP, CLAMP_TO_EDGE, or CLAMP_TO_BOUNDARY.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if boundaryModeT is a value other than CLAMP, WRAP, CLAMP_TO_EDGE, or CLAMP_TO_BOUNDARY.

getBoundaryModeT

public int getBoundaryModeT()
Retrieves the boundary mode for the T coordinate.

Returns:
the current boundary mode for the T coordinate.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setMinFilter

public void setMinFilter(int minFilter)
Sets the minification filter function. This function is used when the pixel being rendered maps to an area greater than one texel.

Parameters:
minFilter - the minification filter. One of: FASTEST, NICEST, BASE_LEVEL_POINT, BASE_LEVEL_LINEAR, MULTI_LEVEL_POINT, MULTI_LEVEL_LINEAR, or FILTER4
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if minFilter is a value other than FASTEST, NICEST, BASE_LEVEL_POINT, BASE_LEVEL_LINEAR, MULTI_LEVEL_POINT, MULTI_LEVEL_LINEAR, or FILTER4.
See Also:
Canvas3D.queryProperties()

getMinFilter

public int getMinFilter()
Retrieves the minification filter.

Returns:
the current minification filter function.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setMagFilter

public void setMagFilter(int magFilter)
Sets the magnification filter function. This function is used when the pixel being rendered maps to an area less than or equal to one texel.

Parameters:
magFilter - the magnification filter, one of: FASTEST, NICEST, BASE_LEVEL_POINT, BASE_LEVEL_LINEAR, LINEAR_SHARPEN, LINEAR_SHARPEN_RGB, LINEAR_SHARPEN_ALPHA, or FILTER4.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if magFilter is a value other than FASTEST, NICEST, BASE_LEVEL_POINT, BASE_LEVEL_LINEAR, LINEAR_SHARPEN, LINEAR_SHARPEN_RGB, LINEAR_SHARPEN_ALPHA, or FILTER4.
See Also:
Canvas3D.queryProperties()

getMagFilter

public int getMagFilter()
Retrieves the magnification filter.

Returns:
the current magnification filter function.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setImage

public void setImage(int level,
                     ImageComponent image)
Sets the image for a specified mipmap level.

Parameters:
level - mipmap level to set: 0 is the base level
image - ImageComponent object containing the texture image for the specified mipmap level
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if an ImageComponent3D is used in a Texture2D object; if an ImageComponent2D is used in a Texture3D object; or if this object is part of a live scene graph and the image being set at this level is not the same size (width, height, depth) as the old image at this level.

getImage

public ImageComponent getImage(int level)
Retrieves the image for a specified mipmap level.

Parameters:
level - mipmap level to get: 0 is the base level
Returns:
the ImageComponent object containing the texture image at the specified mipmap level.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setImages

public void setImages(ImageComponent[] images)
Sets the array of images for all mipmap levels.

Parameters:
images - array of ImageComponent objects containing the texture images for all mipmap levels
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if an ImageComponent3D is used in a Texture2D object; if an ImageComponent2D is used in a Texture3D object; if images.length is not equal to the total number of mipmap levels; or if this object is part of a live scene graph and the size of each dimension (width, height, depth) of the image at a given level in the images array is not half the dimension of the previous level.
Since:
Java 3D 1.2

getImages

public ImageComponent[] getImages()
Retrieves the array of images for all mipmap levels.

Returns:
the array of ImageComponent objects for this Texture.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.2

getFormat

public int getFormat()
Retrieves the format of this Texture object.

Returns:
the format of this Texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.2

getWidth

public int getWidth()
Retrieves the width of this Texture object.

Returns:
the width of this Texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.2

getHeight

public int getHeight()
Retrieves the height of this Texture object.

Returns:
the height of this Texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.2

getBoundaryWidth

public int getBoundaryWidth()
Retrieves the width of the boundary of this Texture object.

Returns:
the width of the boundary of this Texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

numMipMapLevels

public int numMipMapLevels()
Retrieves the number of mipmap levels needed for this Texture object.

Returns:
(maximum Level - base Level + 1) if mipMapMode is MULTI_LEVEL_MIPMAP; otherwise it returns 1.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.2

setMipMapMode

public void setMipMapMode(int mipMapMode)
Sets mipmap mode for texture mapping for this texture object.

Parameters:
mipMapMode - the new mipmap mode for this object. One of: BASE_LEVEL or MULTI_LEVEL_MIPMAP.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if mipMapMode is a value other than BASE_LEVEL or MULTI_LEVEL_MIPMAP.

getMipMapMode

public int getMipMapMode()
Retrieves current mipmap mode.

Returns:
current mipmap mode of this texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setEnable

public void setEnable(boolean state)
Enables or disables texture mapping for this appearance component object.

Parameters:
state - true or false to enable or disable texture mapping
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

getEnable

public boolean getEnable()
Retrieves the state of the texture enable flag.

Returns:
true if texture mapping is enabled, false if texture mapping is disabled
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setBoundaryColor

public void setBoundaryColor(Color4f boundaryColor)
Sets the texture boundary color for this texture object. The texture boundary color is used when boundaryModeS or boundaryModeT is set to CLAMP or CLAMP_TO_BOUNDARY and if texture boundary is not specified.

Parameters:
boundaryColor - the new texture boundary color.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.

setBoundaryColor

public void setBoundaryColor(float r,
                             float g,
                             float b,
                             float a)
Sets the texture boundary color for this texture object. The texture boundary color is used when boundaryModeS or boundaryModeT is set to CLAMP or CLAMP_TO_BOUNDARY and if texture boundary is not specified.

Parameters:
r - the red component of the color.
g - the green component of the color.
b - the blue component of the color.
a - the alpha component of the color.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.

getBoundaryColor

public void getBoundaryColor(Color4f boundaryColor)
Retrieves the texture boundary color for this texture object.

Parameters:
boundaryColor - the vector that will receive the current texture boundary color.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph

setBaseLevel

public void setBaseLevel(int baseLevel)
Specifies the base level for this texture object.

Parameters:
baseLevel - index of the lowest defined mipmap level.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if specified baseLevel < 0, or if baseLevel > maximumLevel
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getBaseLevel

public int getBaseLevel()
Retrieves the base level for this texture object.

Returns:
base level for this texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setMaximumLevel

public void setMaximumLevel(int maximumLevel)
Specifies the maximum level for this texture object.

Parameters:
maximumLevel - index of the highest defined mipmap level.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if specified maximumLevel < baseLevel, or if maximumLevel > log2(max(width,height))
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getMaximumLevel

public int getMaximumLevel()
Retrieves the maximum level for this texture object.

Returns:
maximum level for this texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setMinimumLOD

public void setMinimumLOD(float minimumLod)
Specifies the minimum level-of-detail for this texture object.

Parameters:
minimumLod - the minimum level-of-detail.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if specified lod > maximum lod
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getMinimumLOD

public float getMinimumLOD()
Retrieves the minimum level-of-detail for this texture object.

Returns:
the minimum level-of-detail
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setMaximumLOD

public void setMaximumLOD(float maximumLod)
Specifies the maximum level-of-detail for this texture object.

Parameters:
maximumLod - the maximum level-of-detail.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
java.lang.IllegalArgumentException - if specified lod < minimum lod
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getMaximumLOD

public float getMaximumLOD()
Retrieves the maximum level-of-detail for this texture object.

Returns:
the maximum level-of-detail
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setLodOffset

public void setLodOffset(float s,
                         float t,
                         float r)
Specifies the LOD offset for this texture object.

Parameters:
s - the s component of the LOD offset
t - the t component of the LOD offset
r - the r component of the LOD offset
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

setLodOffset

public void setLodOffset(Tuple3f offset)
Specifies the LOD offset for this texture object.

Parameters:
offset - the LOD offset
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getLodOffset

public void getLodOffset(Tuple3f offset)
Retrieves the LOD offset for this texture object.

Parameters:
offset - the vector that will receive the current LOD offset.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setAnisotropicFilterMode

public void setAnisotropicFilterMode(int mode)
Specifies the anisotropic filter mode for this texture object.

Parameters:
mode - the anisotropic filter mode. One of ANISOTROPIC_NONE or ANISOTROPIC_SINGLE_VALUE.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if mode is a value other than ANISOTROPIC_NONE or ANISOTROPIC_SINGLE_VALUE
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getAnisotropicFilterMode

public int getAnisotropicFilterMode()
Retrieves the anisotropic filter mode for this texture object.

Returns:
the currrent anisotropic filter mode of this texture object.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setAnisotropicFilterDegree

public void setAnisotropicFilterDegree(float degree)
Specifies the degree of anisotropy to be used when the anisotropic filter mode specifies ANISOTROPIC_SINGLE_VALUE.

Parameters:
degree - degree of anisotropy
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
java.lang.IllegalArgumentException - if degree < 1.0 or degree > the maximum degree of anisotropy.
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getAnisotropicFilterDegree

public float getAnisotropicFilterDegree()
Retrieves the anisotropic filter degree for this texture object.

Returns:
the current degree of anisotropy of this texture object
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setSharpenTextureFunc

public void setSharpenTextureFunc(float[] lod,
                                  float[] pts)
sets the sharpen texture LOD function for this texture object.

Parameters:
lod - array containing the level-of-detail values.
pts - array containing the function values for the corresponding level-of-detail values.
Throws:
java.lang.IllegalStateException - if the length of lod does not match the length of pts
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

setSharpenTextureFunc

public void setSharpenTextureFunc(Point2f[] pts)
sets the sharpen texture LOD function for this texture object. The Point2f x,y values are defined as follows: x is the lod value, y is the corresponding function value.

Parameters:
pts - array of Point2f containing the lod as well as the corresponding function value.
Throws:
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getSharpenTextureFuncPointsCount

public int getSharpenTextureFuncPointsCount()
Gets the number of points in the sharpen texture LOD function for this texture object.

Returns:
the number of points in the sharpen texture LOD function.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

getSharpenTextureFunc

public void getSharpenTextureFunc(float[] lod,
                                  float[] pts)
Copies the array of sharpen texture LOD function points into the specified arrays. The arrays must be large enough to hold all the points.

Parameters:
lod - the array to receive the level-of-detail values.
pts - the array to receive the function values for the corresponding level-of-detail values.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

getSharpenTextureFunc

public void getSharpenTextureFunc(Point2f[] pts)
Copies the array of sharpen texture LOD function points including the lod values and the corresponding function values into the specified array. The array must be large enough to hold all the points. The individual array elements must be allocated by the caller as well.

Parameters:
pts - the array to receive the sharpen texture LOD function points
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

setFilter4Func

public void setFilter4Func(float[] weights)
sets the filter4 function for this texture object.

Parameters:
weights - array containing samples of the filter4 function.
Throws:
java.lang.IllegalArgumentException - if the length of weight < 4
RestrictedAccessException - if the method is called when this object is part of live or compiled scene graph.
Since:
Java 3D 1.3
See Also:
Canvas3D.queryProperties()

getFilter4FuncPointsCount

public int getFilter4FuncPointsCount()
Retrieves the number of filter4 function values for this texture object.

Returns:
the number of filter4 function values
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3

getFilter4Func

public void getFilter4Func(float[] weights)
Copies the array of filter4 function values into the specified array. The array must be large enough to hold all the values.

Parameters:
weights - the array to receive the function values.
Throws:
CapabilityNotSetException - if appropriate capability is not set and this object is part of live or compiled scene graph
Since:
Java 3D 1.3