E18478-18: April 2014
E18478-17: February 2014
Hardware Components of Exalogic: Added generic link that points to data sheets.
Environmental Requirements: Added generic link that points to data sheets.
What Next?: Added note with a link to MOS document for changing passwords.
Cabling Diagrams: Removed sections about multirack cabling and added a reference to the Exalogic Elastic Cloud Multirack Cabling Guide.
E18478-16: December 2013
Hardware Components of Exalogic: Added generic link that points to X4-2 data sheet.
Hardware Components of Exalogic: Added precabling information for X4-2.
Environmental Requirements: Added generic link that points to X4-2 data sheet.
Cabling Tables: Added precabling information for X4-2.
Rebranded the document to cater to X4-2 in addition to X3-2 and X2-2.
E18478-15: September 2013
E18478-14: August 2013
Default Port Assignments: Added default ports assignments of the Exalogic rack.
Initial Configuration: Updated note about the initial configuration of the storage appliance.
Set Up Ethernet Over InfiniBand on Oracle Solaris 11.1: Added Oracle Solaris 11.1 procedure for setting up Ethernet over InfiniBand.
Oracle Solaris: Creating VNICs and Associating Them with VLANs: Added Oracle Solaris 11.1 procedure for creating VLAN-tagged VNICs.
Activate the Storage Appliance: Updated the procedure and screenshot in this section.
Manage Solaris Zones on Exalogic: Created appendix describing the use of Solaris zones on Exalogic.
Customize Linux on the Compute Nodes: Created appendix describing how to install, upgrade, and remove RPMs on Linux compute nodes.
E18478-13: March 2013
Hardware Components of Exalogic: Added direct links to the data sheets for X2-2 and X3-2.
Hardware Components of Exalogic: Added information about the spares kit for Exalogic.
Cabling Diagrams: Added additional Exalogic wiring configurations.
Replacement Units: Added note about the spares kit for Exalogic.
Cabling Tables: Corrected errors in the networking tables.
E18478-12: February 2013
Parts for Sun Server X3-2 Compute Nodes: Added the replacement part numbers of the new BBU.
Create an IPoIB Partition and Adding Ports: Corrected the smpartition
command syntax in step 3.
E18478-11: December 2012
Hardware Components of Exalogic: Added generic link that points to both X2-2 and X3-2 data sheets.
Environmental Requirements: Added generic link that points to both X2-2 and X3-2 data sheets.
E18478-10: October 2012
Environmental Requirements: Added environmental requirements for X3-2.
Create an IPoIB Partition and Adding Ports: Added steps for configuring the storage appliance when creating IB partitions.
Chapter 16, "Monitoring the Exalogic Machine Using Oracle Enterprise Manager Ops Center": Added information, up front, to clarify the scope of the content in this chapter.
Replacement Units: Added replacement parts list for the new hardware components in X3-2.
Rebranded the document cater to both X3-2 and X2-2.
E18478-09: September 2012
Configure Ethernet Over InfiniBand:
Updated the procedure to set up EoIB on Oracle Linux and Oracle Solaris, to correct certain errors and inconsistencies.
Added information about the recommended naming convention for VNICs on Oracle Linux.
Subnet Manager Operation in Different Rack Configurations:
Updated Table 13-1 to make the information clearer.
Added information for running the SM in rack configurations with varying switch-firmware versions.
Create a Partition for EoIB and Associating the pkey with a VNIC and VLAN: Added information about the recommended naming convention for VNICs on Oracle Linux.
Configuration Tasks: Updated with information about contacting Oracle Advanced Customer Support.