| Skip Navigation Links | |
| Exit Print View | |
|
Oracle Solaris SAN Configuration and Multipathing Guide |
2. Fibre Channel Configuration Overview
3. Administering Multipathing Devices Through mpathadm Commands
4. Configuring Multipathing Software
SAS Multipathing Considerations
7. Configuring IPFC SAN Devices
8. Solaris 10 10/08 x86/x64 Fibre Channel Operating System Booting Procedure
9. Persistent Binding for Tape Devices
A. Manual Configuration for Fabric-Connected Devices
Adding and removing SAS devices is performed dynamically when using the mpt(7d) driver. You are no longer required to edit the sd.conf file to enable your system to detect specific targets and LUNs attached with the mpt driver. See mpt(7d) for more information.
You are no longer required to edit the sd.conf file to enable your system to detect specific targets and LUNs attached with the mpt driver.
If you add or remove a device in your SAS domain, messages will be written to the /var/adm/messages file indicating presence or removal. If a device has been added, it is visible to and available by the format(1m) command.
|