Index

Index

B

blade

installing a blade, 1, 2

pull recess, 1

Blade Support Chip, 1, 2

break, 1

break command (for the blades), 1

BSC, 1

C

console

returning to sc> prompt from blade or switch, 1, 2

console access to server blades, 1

console access to switches, 1

console command, 1

consolehistory command, 1

D

deleting named users, 1

E

event reporting

controlling the display, 1

interpreting events, 1

turning on and off on serial interface, 1

Explorer, 1

F

factory default settings

how to restore the SC defaults, 1

fault LED, 1

front of chassis, 1

filler panel

installing a filler panel, 1, 2

pull recess, 1

filler panels

installing, 1

firmware upgrades, 1 - 2

flashupdate command, 1, 2, 3, 4

H

hostnames, 1

L

LED

fault (blade), 1

fault (rear of chassis), 1

locator (rear of chassis), 1

power (blade), 1

power (rear of chassis), 1

SSC fault, 1

SSC OK/ready to remove, 1

SSC power, 1

LEDs, 1

locator LED, 1

turning on the ok/ready to remove LED, 1

locator LED, 1

front of chassis, 1

M

MAC address, 1

monitoring the system chassis, 1 - 2

O

ok/ready to remove LED, 1

OpenBoot PROM, 1

P

panels, 1

password access to the System Controller, 1

passwords, 1

power LED

front of chassis, 1

Power Supply Units

checking the health of, 1, 2

disabling for safe removal, 1

installing, 1

Installing a new PSU, 1

removing, 1

powering components on and off, 1 - 2

poweroff, 1

poweroff command, 1, 2, 3

poweron command, 1, 2, 3, 4

R

removefru, 1

removefru command, 1, 2, 3, 4

removing server blades, 1

Replacing optional hardware, 1 - 2

reset, 1

runt-time console history, 1

S

serial number for chassis, 1

server blade

event reporting, 1

server blades

accessing the console, 1

accessing the console with read-only access, 1

boot console history, 1

break command, 1

bringing up a new blade, 1

console access, 1

event reporting, 1

exiting the console, 1

forcing other users off the console, 1

installing, 1

installing new blades, 1

powering off, 1

powering on and off, 1 - 2

preparing for safe removal, 1

removing, 1

resetting, 1

run-time console history, 1

shutting down safely for removal, 1

syslogd, 1

taking down to standby power, 1

upgrading firmware, 1

upgrading OBP, 1

viewing the console history, 1

setupsc command, 1

showdate command, 1, 2

showenvironment, 1, 2

showenvironment command, 1

showfru, 1

showfru command, 1

showlocator command, 1

showlogs command, 1, 2, 3

showplatform, 1

showsc, 1

showsc command, 1, 2

SSC

checking the health of, 1

date and time on, 1

event reporting, 1

installing a new SSC, 1, 2

powering down, 1, 2

powering down to standby power, 1

preparing for safe removal, 1, 2

removing, 1, 2

resetting, 1

standbyfru, 1

standbyfru command, 1, 2

Sun Explorer, 1

switch

accessing the switch console, 1

switches

boot console history, 1

console access, 1

exiting the console, 1

forcing other users off the console, 1

resetting, 1

run-time console history, 1

upgrading firmware, 1

viewing the console history, 1

syslogd, 1

system chassis

installing into a rack, 1

populating the new chassis, 1

removing from a four-post rack, 1

removing from a two-post rack, 1

removing the chassis's components, 1

replacing, 1

serial number, 1

shutting down all components, 1

System Controller

active and standby, 1

default user, 1

deleting named users, 1

first-time login, 1

setting up named users, 1 - 2

time setting, 1

upgrading firmware, 1

T

telnet

access to server blades from management network, 1

TFTP, 1

setting up a TFTP server, 1

time setting on SSC, 1

troubleshooting, 1

assembling information for a Sun engineer, 1

the server blades, 1

the switches, 1

the whole chassis, 1

what to check before calling Sun, 1

Copyright © 2004, Sun Microsystems, Inc. All rights reserved.