Sun Blade X6220 Server Module Installation Guide
820-0044-10
Contents |
1. Setting Up the Server Hardware
Installation Overview and Terms
Powering On and Powering Off the Server Module
To Apply Standby Power for Initial Service Processor Configuration
To Power on Main Power for All Server Components
Using a Dongle Cable for Testing
To Use a Dongle Cable for Testing
2. Setting Up the Server Software
About the Preconfigured Administrator Account
Connecting to the Server Module ILOM
Option 1: Connecting to ILOM Through the Chassis Serial Connector
Option 2: Connecting to ILOM Through a Dongle Cable
Option 3: Connecting to ILOM Through the Ethernet Port
Configuring the ILOM IP Address
Configuring the ILOM IP Address Using BIOS Setup Utility
Configuring the ILOM IP Address Using DHCP
Configuring the ILOM IP Address Using the CLI
Setting Up Platform Operating System and Driver Software
3. Configuring the Preinstalled Solaris 10 Operating System
Configuring the Preinstalled Solaris 10 Operating System
To Connect to the System Console Through the Service Processor
To Redirect the Console Output to the Video Port (Optional)
Using the Solaris Installation Program
Reinstalling the Solaris Operating System
Copyright © 2007, Sun Microsystems, Inc. All Rights Reserved.