| Sun Intel Adaptec RAID User’s Guide |    
|
| C H A P T E R 18 |
|
hrconf Commands |
The following are the hrconf commands:
For large-scale deployments, stores the current controller and disk drive configuration setting to a specific file. Stored files can be used with the restore command to restore to another controller or disk drive. To restore, the controller or disk drive must have the same configuration as it did before the backup. For example: the same type of controller, same number and type of disk drives with same IDs and channels.
hrconf backup controller# filename
The relative or absolute path with filename
hrconf BACKUP 1 C:\WINDOWS\HR2200 |
Creates logical drives. You must provide the channel and device ID of the physical devices. On redundant logical drives, hrconf performs autosynchronization.
hrconf create controller# logicaldrive [[stripesize size] | [name] | [low | medium | high] | [build | clear | quick]] max RAID# channel# id# [channel# id#] [noprompt]
A logical drive will be created
Optional parameter to specifying a stripe size. The size can be 16, 32, or 64 KB.
Optional parameter to specify the name of a logical device to be created.
Initialization priority for logical drive to be created.
Initialization method for the logical drive.
RAID level for the new logical drive. 0, 1, 10, and volume are supported.
The space-delimited channel number and device number pairs for each device to add to the logical drive.
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
|
hrconf create 1 logicaldrive STRIPESIZE 64 MAX 0 1 0 1 1 1 2 |
Deletes a logical drive. All data stored on the logical drive will be lost. Spanned drives cannot be deleted with this function.
hrconf delete controller# logicaldrive [logicaldrive# [logicaldrive#] | all] [noprompt]
The number of the logical drive(s) to be deleted or all to delete all logical drives
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
hrconf delete 1 logicaldrive 1 2 3 hrconf delete 1 logicaldrive all |
Updates Windows device drivers. When given a directory name, it will attempt to update a driver to the version found in the given directory.
| Note - This command is available only on Windows systems. |
The directory path containing the driver that you want to update.
hrconf driverupdate C:\windowsall |
Lists information about the controllers, logical drives, and physical devices. This information can include (but is not limited to) the following items:
hrconf getconfig controller# [ad | ld | pd | al]
Logical drive information only
Physical device information only
hrconf getconfig 1 ad |
The getstatus function displays the status of any background command that is currently running.
hrconf getstatus 1 |
Returns the version information for all controllers or the optionally specified controller.
hrconf getversion [controller#]
The controller number. If a controller number is not specified, information is returned for all controllers.
hrconf getversion 1 |
Blinks the LEDs on a device(s) connected to a controller.
hrconf identify controller# logicaldrive logicaldrive# | all
hrconf identify controller# device device# channel# id#
The number of the logical drive to be identified or all to identify all logical drives
The device number for the drive
The channel and ID number for the device
hrconf identify 1 device 0 0 hrconf identify 1 all |
Enables the controller to check for the removal of any disk drives in the ready state, and to check for the connection of any new disk drives to the controller. The command returns when the rescan is complete.
hrconf rescan 1 |
Restores the controller configuration by importing its configuration settings from a specified file. Deletes the current configuration. The file must have been saved through the backup command from a controller of the same type, same number, and type of physical devices with same channels and device IDs. A reboot is required for the configuration change to take effect.
hrconf restore controller# filename [noprompt]
The name of the file from which to read the configuration
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
hrconf restore 1 C:\WINDOWS\HR2200 noprompt |
| Note - This command is only available on systems running Windows or Linux. |
Updates the controller or enclosure firmware. The ROM image file must be in the same directory prior to invoking hrconf.
hrconf romupdate controller# [controller] filename
Update the controller, not the firmware
The relative or absolute path with filename
hrconf romupdate 1 controller AS4830.UFI |
Marks a logical device bootable.
hrconf setboot controller# logicaldrive logicaldrive#
The number of the logical drive to mark bootable
hrconf setboot 1 logicaldrive 1 |
Resets the controller's configuration. Logical drives are deleted, hard disks are reset to the READY state.
hrconf setconfig controller# default [noprompt]
Restores the controller’s default configuration
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
hrconf setconfig 1 default |
Redefines the state of a physical device from its current state to the designated state, or redefines a logical device state to force the logical drive online.
hrconf setstate controller# logicaldrive logicaldrive# optimal [noprompt]
hrconf setstate controller# device channel# id# hsp | rdy | rbl [noprompt]
The logical drive whose state will be altered
The channel and ID number for the device
Create a hot spare from a ready drive
Remove a hot spare designation
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
hrconf setstate 1 0 1 hsp hrconf setstate 1 0 2 rdy hrconf setstate 1 0 2 rbl hrconf setstate 1 logicaldrive 1 optimal |
Performs a task on a logical drive.
hrconf task start controller# logicaldrive logicaldrive# verify_fix | verify | clear [noprompt]
The number of the logical drive on which the task is to be performed
Verifies the disk media and repairs the disk if bad data is found
Removes all data from the drive
Used mostly for the purpose of scripting setup, this parameter overrides all user confirmations.
hrconf task start 1 logicaldrive 1 verify noprompt hrconf task stop 1 logicaldrive 1 |
| Sun Intel Adaptec RAID User’s Guide | 820-4708-13 |
|
Copyright © 2009 Sun Microsystems, Inc. All rights reserved.