test

Sun Cluster Data Service for BroadVision One-To-One Enterprise Guide for Solaris OS

ProcedureHow to Verify the Sun Cluster HA for BroadVision One-To-One Enterprise Installation and Configuration

Use this procedure to verify that you installed and configured Sun Cluster HA for BroadVision One-To-One Enterprise correctly.

Steps

  1. From a web browser, log in to an application that you have configured with the BroadVision One-To-One Enterprise software.

  2. Log in to the node that hosts the root host resource group.

  3. Become the BroadVision user.

  4. Shut down the root host processes.

    1. Set the BV_LOCAL_HOST environment variable as root-host-logical-hostname.

    2. Source the bv1to1.conf.sh file or the bv1to1.conf.csh file, depending on the shell that you use.

    3. Run the following BroadVision command.


      # bvconf shutdown -local
    Note –

    The Sun Cluster HA for BroadVision One-To-One Enterprise fault monitors will restart the root host.

  5. Ensure that your web browser connection to BroadVision One-To-One Enterprise is still active.

  6. Run the scswitch command to switch the root host resource group to another cluster node, such as node2.


    # scswitch -z -g root-host-resource-group -h node2

  7. Ensure that your web browser connection to BroadVision One-To-One Enterprise is still active.

  8. Repeat Step 2 through Step 7 for each back-end resource group.

Next Steps

You have completed your Sun Cluster HA for BroadVision One-To-One Enterprise installation and configuration. See the following sections for supplemental information.