C H A P T E R 5 |
ALOM Fault Management Tasks |
ALOM CMT contains fault management features. To use these features, use the showfaults and clearfault commands. This chapter contains information on the following headings:
Faults are events indicating that some corrective action is required.
Faults can come from three sources:
The corrective actions indicated by faults can take three forms:
To manage system faults effectively, access the knowledge article database at www.sun.com.
To Get the Appropriate Knowledge Article |
1. At the sc> prompt, issue the showfaults command
sc> showfaults ID FRU Fault 0 FIOBD Host detected fault, MSGID: SUNW-TEST07 1 MB Host detected fault, MSGID: SUNW-TEST07 |
2. Identify the SUNW-MSG-ID string in the showfault output
In this example, it is SUNW-TEST07.
3. Point your browser to http://www.sun.com/msg/SUNW-TEST07
(Alternatively, point your browser to http://www.sun.com/msg/ and type the SUNW-MSG-ID SUNW-TEST07 into the lookup window on the http://www.sun.com/msg/ web page)
4. Read and follow the instructions in the article supplied by the www.sun.com/msg web site.
For example, the knowledge article might advise you to:
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.