What to Do

1. Remove the new memory module from its antistatic packaging.

2. Locate the socket into which you will install the module.

See "About Memory".

Each bank used must contain four modules of equal capacity (for example, four 32-Mbyte memory modules, four 64-Mbyte modules) to function properly. Do not mix capacities within the same bank. See "About Memory".

1. Orient the module so that the small notch on the bottom corner of the module is at the same end as the socket's ejection lever.

   Figure 6-6  

   
   

2. Align the module with its socket until it contacts the socket evenly along the socket's length.

3. Push firmly down on both ends of the module until the bottom edge is firmly seated in the socket.

   Ensure that all module contacts engage in the socket.