Sun Fire V125 Server Administration Guide
819-7420-10
Contents |
To Turn the Locator Indicator On
To Turn the Locator Indicator Off
To Display Locator Indicator Status
Controlling Server Power States
2. Removing and Replacing Components
Avoiding Electrostatic Discharge
To Avoid Electrostatic Discharge While Working on the Front Panel
Swapping a System Configuration Card Between Servers
To Swap the System Configuration Card
Removing and Replacing the Hard Drive
To Install a SCSI Hard Drive With Solaris Running
To Remove a SCSI Hard Drive With the Solaris OS Running
Removing and Replacing the DVD Drive
3. Sun Advanced Lights Out Manager
Sun Advanced Lights Out Manager
To Switch to the Server Console Prompt
To Set the Serial Port Speed Back to the Default
How Sun Management Center Works
Other Sun Management Center Features
Interoperability - Third-Party Monitoring Tools
Obtaining the Latest Information
When to Run Hardware Diagnostic Suite
Requirements for Using Hardware Diagnostic Suite
To Find Out If SunVTS Is Installed
Sun Advanced Lights Out Manager
To Start POST Diagnostics - Method 1
To Start POST Diagnostics - Method 2
Controlling OpenBoot Diagnostics Tests
What OpenBoot Diagnostics Error Messages Tell You
Operating System Diagnostic Tools
Error and System Message Log Files
Solaris System Information Commands
To Run Solaris System Information Commands
Recent Diagnostic Test Results
OpenBoot Configuration Variables
To View OpenBoot Configuration Variables
To Set OpenBoot Configuration Variables
Additional Diagnostic Tests for Specific Devices
Using the probe-scsi Command to Confirm That Hard Drives Are Active
Using probe-ide Command to Confirm That the DVD or CD-ROM Drive Is Connected
Using watch-net and watch-net-all Commands to Check the Network Connections
Copyright © 2006, Sun Microsystems, Inc. All Rights Reserved.