test

Sun Enterprise 6500/5500/4500 Systems Installation Guide

Unpacking the Enterprise 6500/5500 Cabinet Systems

Note -

Inspect all shipping cartons for evidence of physical damage. If a shipping carton is damaged, request that the carrier's agent be present when the carton is opened. Keep all contents and packing material for the agent's inspection.

If you have a standalone Enterprise 4500 system, or the cabinet is already unpacked, go to "Preparing the Electrical Circuits".

Note -

Any unpacking instructions printed on the outside of the shipping carton take precedence over instructions in this section.

Caution - Caution -

If your cabinet system is on a wooden pallet, extend the cabinet levelling pads so that the cabinet cannot roll. If the original shipping pallet has side rails, it is not necessary to lower the levelling pads.

  1. Cut the plastic or metal straps that are around the shipping container and lift off the corrugated top.

    Store the shipping materials for future shipments.

  2. Remove the sides of the container.

    The container is held together by six plastic clips. To unlock a clip, press the two inner tabs together and pull out the entire clip.

  3. Remove inner packing materials from the top and corners of the cabinet.

  4. At the front of the pallet, lift the Velcro(TM) strip at each end of the wooden bar to detach the bar, then set it aside.

  5. Slide out the two wooden ramps from under the cabinet.

  6. Attach the wooden ramps to the pallet using the Velcro strip that is attached to each ramp.

    Ensure both wheel guides (wooden strips) are to the outside. See Figure 1-2.

    Caution - Caution -

    Three or more people are needed to move the server cabinet safely. Two people must push at the front of the cabinet to control the movement of the cabinet.

    Caution - Caution -

    To prevent the cabinet from tipping over, push or pull only on the upper half of the cabinet.

    Figure 1-2 Attaching the Ramps to the Shipping Pallet

    Graphic

Shipping and Storing the System

Save the original shipping containers and packing materials in case you need to store or ship your system.

If you cannot store the shipping materials, recycle or dispose of the materials properly. Consult your local recycling authority for information.