Removing the External Cables

1. Position the server for easy access to the rear.

2. For Enterprise 6500 and 5500 systems only:

   1. Open the door or pull out the hinge pins (Figure 11-5) and lift the door off.

   2. Remove the kick panel by loosening two screws.

      Figure 11-5 Rear Screen and Kick Panel

      
      

3. Disconnect each cable from the I/O+ boards carefully.

   Squeeze the locking tabs on the sides of the connector body, or loosen any retaining screws (if provided), and pull the connectors out.

4. Mark each cable for identification as you remove it.

5. Remove any cable restraints.

6. Clear the cables away from the server.