A P P E N D I X E

System Specifications

This appendix provides the following specifications for the Sun Fire V890 server:

Reference for Physical Specifications

The dimensions and weight of the system are as follows.

Measurement	U.S.	Metric	Comments
Height (with casters)	28.1 in.	71.4 cm
Width	18.9 in.	48.0 cm
Depth	32.9 in.	83.6 cm
Weight: Minimum Maximum	194.0 lb 288.0 lb	88.0 kg 130.6 kg	Actual weight depends on the installed options
Power Cord	8.2 ft	2.5 m

The following table provides the electrical specifications for the system.

Parameter	Value
Input
Nominal Frequencies	50 Hz or 60 Hz nominal
Nominal Voltage Range	Autoranging 200 to 240 VAC
Maximum Current AC RMS	8 A @ 200 VAC (each power cord for two power supplies per system)
AC Operating Range	180 to 264 Vrms, 47 - 63Hz
Output
+3.3 VDC	3 to 72 A
+5 VDC	3 to 56 A
+12 VDC	1 to 35 A
+48 VDC	0 to 50 A
Maximum DC Power Output	2509 Watts
Maximum System AC Power Consumption	3200 Watts
Maximum System Heat Dissipation	10,912 BTU/hr
Volt-Ampere Rating	2078 VA with 1629 Watt load (PF=0.98)

The operating and non-operating environmental requirements for the system are as follows.

Parameter	Value
Operating
Temperature	5°C to 35°C (41°F to 95°F)--IEC 68-2-1, 68-2-2
Humidity	20% to 80% RH, noncondensing; 27 °C max wet bulb--IEC 68-2-2, 68-2-3
Altitude	0 to 3000 meters (0 to 10,000 feet)--IEC 68-2-40, 68-2-41
Vibration: Deskside Rackmounted	0.0002 g²/Hz, 5 to 500 Hz (random)--IEC 68-2-6 0.00015 g²/Hz, 5 to 500 Hz (random)--IEC 68-2-6
Shock: Deskside Rackmounted	4 g peak, 11 milliseconds half-sine pulse--IEC 68-2-27 3 g peak, 11 milliseconds half-sine pulse--IEC 68-2-27
Declared Acoustics	6.7 bels dB(A) operating, 7.6 bels dB(A) at `ok` prompt
Non-Operating
Temperature	-20°C to 60°C (-4°F to 140°F)--IEC 68-2-1, 68-2-2
Humidity	95% RH, noncondensing at 40°C--IEC 68-2-2, 68-2-3
Altitude	0 to 12,000 meters (0 to 40,000 feet)--IEC 68-2-40, 68-2-41
Vibration: Deskside Rackmounted	0.002 g²/Hz, 5 to 500 Hz (random)--IEC 68-2-6 0.0015 g²/Hz, 5 to 500 Hz (random)--IEC 68-2-6
Shock: Deskside Rackmounted	15 g peak, 11 milliseconds half-sine pulse--IEC 68-2-27e 10 g peak, 11 milliseconds half-sine pulse--IEC 68-2-27e
Handling Drops	50 mm--IEC 68-2-31
Threshold Impact	1 m/s--SUN 900-1813

The system complies with the following specifications.

Category	Relevant Standards
Safety	EN60950/IEC60950 TUV UL 60950, CB Scheme IEC 60950, C22.2 No. 60950 from UL
RFI/EMI	Australia/New Zealand AS/NZ 3548 Class A Industry Canada ICES-003 Class A European Community EN55022 Class A Japan VCCI Class A Taiwan CNS 13438 Class A US FCC 47CFR15.B Class A
Immunity	EN55024 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11
X-ray	US DHHS 21CFR Subchapter J PTB German X-ray Decree

Minimum clearances needed for proper cooling are as follows.

Blockage	Required Clearance
Front blockage only	3.0 in. (7.6 cm)
Rear blockage only	3.5 in. (8.9 cm)
Front and rear blockage Front clearance Rear clearance	3.5 in. (8.9 cm) 4.0 in. (10.2 cm)

Blockage

Required Clearance

Front blockage only

3.0 in. (7.6 cm)

Rear blockage only

3.5 in. (8.9 cm)

Front and rear blockage

Front clearance

Rear clearance

3.5 in. (8.9 cm)

4.0 in. (10.2 cm)

Minimum clearances needed for servicing the system are as follows.

Area	Required Clearance
Front Deskside system Rackmounted system	36 in. (91 cm) 48 in. (122 cm)
Rear	36 in. (91 cm)
Right	36 in. (91 cm)
Left	36 in. (91 cm)