|Skip Navigation Links|
|Exit Print View|
|Sun Fire X4800 Server Product Documentation Sun Fire X4800 Server Documentation|
You can access the command-line interface (CLI) remotely using SSH or locally using the serial console port and the multi port cable.
Before You Begin
This procedure assumes that you are set up to access the server using the command-line interface (CLI). For CLI connection procedures, refer to the Oracle Integrated Lights Out Manager (ILOM) 3.0 Supplement for the Sun Fire X4800 Server.
For commands and general information about the ILOM CLI, refer to the Sun Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide, which is available online with the Sun Fire X4800 Server documentation.
The CLI prompt appears.
–> start /SYS (powers on to full power mode)
–> stop /SYS (gracefully powers down to standby power mode)
–> stop —f /SYS (immediate power off to standby power mode)
–> reset /SYS (immediately reboots)