| Sun StorEdge 3000 Family FRU Installation Guide |     |
| Sun StorEdge 3000 Family FRU Installation Guide | |
Sun StorEdge
3000 Family FRU Installation Guide
816-7326-23
|
Contents |
1. Sun StorEdge 3000 Family FRUs
1.2 Static Electricity Precautions
2. Bezel, Disk Drive, Air Management Sled, and Tabletop Cover FRUs
2.1 Replacing the Front Bezel and Ear Caps
2.1.1 Removing the Front Bezel and Ear Caps
2.1.2 Placing the Bezel and Ear Caps Back Onto the Chassis
2.2.1 Identifying the Defective Disk Drive in a RAID Array
2.2.2 Identifying the Defective Disk Drive in a JBOD Array
2.2.3 Removing a Defective Disk Drive in a RAID or JBOD Array
2.2.4 Installing a New Disk Drive in a RAID or JBOD Array
2.2.5 Scanning the New Drive and Related Procedures for RAID Arrays
2.2.5.1 Scanning the New Drive
2.2.5.2 Checking and Performing the Correct Power-up Sequence
2.2.5.3 Assigning a Disk Drive as a Spare
2.2.5.4 If the Logical Drive Status is REBUILDING
2.2.5.5 Automatic Rebuild and Automatic Global Spare Assignments After a Failed Drive is Replaced
2.3 Installing an Air Management Sled
2.4 Adding or Removing the Tabletop Cover
2.4.1 Converting a Rack-Ready Array to a Tabletop Array
2.4.2 Converting a Tabletop Array to a Rack-Ready Array
3.1 Replacing Power Supply/Fan Modules for 2U Arrays
3.1.1 Replacing an AC Power Supply/Fan Module
3.1.1.1 Removing an AC Power Supply/Fan Module
3.1.1.2 Installing an AC Power Supply/Fan Module
3.1.2 Replacing a DC Power Supply/Fan Module
3.1.2.1 Removing a DC Power Supply/Fan Module
3.1.2.2 Installing a DC Power Supply/Fan Module
3.2 Replacing Power Supply/Fan Modules for 1U Arrays
3.2.1 Replacing an AC Power Supply/Fan Module
3.2.1.1 Removing an AC Power Supply/Fan Module
3.2.1.2 Installing an AC Power Supply/Fan Module
3.2.2 Replacing a DC Power Supply/Fan Module
3.2.2.1 Removing a DC Power Supply/Fan Module
3.2.2.2 Installing a DC Power Supply/Fan Module
4.2 Battery Status on the Initial Firmware Screen
4.3 Battery Dating on the Battery Labels
4.4 Replacing a Battery or Battery Module
4.4.1 Replacing a SCSI Battery
4.4.2 Replacing an FC Battery Module
4.5 FC Battery Status and In-Service Date Procedures
4.5.1 Viewing Status and Setting the In-Service Date With Sun StorEdge CLI
4.5.2 Viewing Status and Setting the In-Service Date With Sun StorEdge Configuration Service
4.5.3 Verifying the In-Service Date When Replacing a Battery in Sun StorEdge Configuration Service
4.5.4 Refreshing the Battery Status With Sun StorEdge Configuration Service
5.1 Replacing the LED Module for 2U Arrays
5.1.1 Reviewing the Parts and Tools
5.1.2 Removing the Front Bezel and Right Ear Cap
5.1.4 Installing a New LED Module
5.1.5 Replacing the Ear Cap and Front Bezel
5.2 Replacing the LED Module for 1U Arrays
5.2.1 Reviewing the Parts and Tools
5.2.2 Removing the Front Bezel and Right Ear Cap
5.2.4 Installing a New LED Module
5.2.5 Replacing the Ear Cap and Front Bezel
6. Sun StorEdge 3510 FC and Sun StorEdge 3511 SATA Controller FRUs
6.1 Replacing an I/O Controller Module
6.2 Saving the NVRAM Configuration Settings
6.3 I/O Controller Replacement for a Dual-Controller Array
6.3.1 Removing an I/O Controller Module
6.3.2 Installing an I/O Controller Module
6.3.3 Monitoring the Automatic Firmware Update with a Recently Installed Controller FRU
6.3.4 SES Firmware Update Sometimes Required with I/O Controller Module Replacements
6.3.5 Restoring the Configuration Settings of a Powered-Off Array
6.4 Converting a Dual-Controller Array to a Single-Controller Array
6.5 Converting a Single-Controller Array to a Dual-Controller Array
6.6 I/O Controller Replacement for a Single-Controller Array
6.6.1 Downgrading from Controller Firmware Version 4.1x to 3.27
7. Sun StorEdge 3320 SCSI Controller FRUs
7.1 Replacing a SCSI Controller Module
7.2 Saving the NVRAM Configuration Settings
7.3 SCSI Controller Replacement for a Dual-Controller Array
7.3.1 Removing a SCSI Controller Module
7.3.2 Installing a SCSI Controller Module
7.3.3 Monitoring the Automatic Firmware Update for a Recently Installed Controller FRU
7.3.4 Restoring the Configuration Settings of a Powered-Off Array
7.4 Converting a Dual-Controller Array to a Single-Controller Array
7.5 Converting a Single-Controller Array to a Dual-Controller Array
7.6 SCSI Controller Replacement for a Single-Controller Array
8. Sun StorEdge 3310 SCSI Controller FRUs
8.1 Replacing a SCSI Controller Module
8.2 Saving the NVRAM Configuration Settings
8.3 SCSI Controller Replacement for a Dual-Controller Array
8.3.1 Removing a SCSI Controller Module
8.3.2 Installing a SCSI Controller Module
8.3.3 Monitoring the Automatic Firmware Update for a Recently Installed Controller FRU
8.3.4 Restoring the Configuration Settings of a Powered-Off Array
8.4 Converting a Dual-Controller Array to a Single-Controller Array
8.5 Converting a Single-Controller Array to a Dual-Controller Array
8.6 SCSI Controller Replacement for a Single-Controller Array
8.6.1 Downgrading From Controller Firmware Version 3.66 to 3.25
9.1 Replacing I/O Expansion Modules
9.1.1 Removing the I/O Expansion Module
9.1.2 Installing the I/O Expansion Module
9.2 Installing Small Form-Factor Pluggable Transceivers
9.3 Installing a RAID/Expansion Chassis FRU
9.4 Converting an FC JBOD Into an FC RAID Array
9.4.1 Managing an FC RAID Array Using Sun StorEdge Configuration Service
9.4.2 Creating a Dual-Controller RAID Array
9.5 Replacing the ID Switch Module
9.5.1 Reviewing the Parts and Tools
9.5.2 Removing the Front Bezel and Left Ear Cap
9.5.3 Removing the ID Switch Module
9.5.4 Installing a New ID Switch Module
9.5.5 Replacing the Ear Cap and Front Bezel
10.1 Replacing SCSI I/O Modules
10.1.1 Installing Gaskets If Needed
10.1.2 Removing the SCSI I/O Module
10.1.3 Installing a SCSI I/O Module
10.2 Replacing the SCSI Terminator Module
10.2.1 Removing the SCSI Terminator Module
10.2.2 Installing a Terminator Module
10.3.2 Installing an EMU Module
10.4 Installing a RAID/Expansion Chassis FRU
10.5 Special JBOD Usage With External Terminators
10.5.1 External Terminators for Special Split-Bus JBOD Maintenance
10.5.2 Older JBOD Split-Bus Configurations
10.6 Installing a Filler Panel on a SCSI Array
11. Sun StorEdge 3120 SCSI Array FRUs
11.1 Installing an Expansion Chassis FRU
A. Inserting a 3.2x Controller Into a 4.1x Chassis
A.1 Replacing a 4.1x Controller with a 3.27 Controller (FC and SATA Only)
A.2 Replacing a 4.1x Controller with a 3.25 Controller (Sun StorEdge 3310 SCSI Controller FRUs Only)
| Sun StorEdge 3000 Family FRU Installation Guide | 816-7326-23 | |
Copyright © 2007, Dot Hill Systems Corporation. All rights reserved.