Documentation, Support, and Training
Understanding the Low Profile Adapter
Front Panel Connectors and LEDs
Power and Environmental Requirements
Hardware and Software Requirements
Solaris Platform Installation Overview
Linux Platform Installation Overview
Microsoft Windows Platform Installation Overview
Verify the Driver Version on a Solaris Platform
Remove the Driver From a Solaris Platform
Download and Install the Driver on a Linux Platform
Remove the Driver From a Linux Platform
Download and Install the Driver on a Microsoft Windows Platform
Remove the Driver From a Microsoft Windows Platform
Installing the Low Profile Adapter
Install the Adapter in a System
Verify the Installation in a Solaris SPARC System
Verify the Installation in a Solaris x86 System
Verify the Installation in a Linux System
Verify the Installation in a Microsoft Windows System
Create /etc/hostname.ixgbe# Files
Configure the Network Host Files With the ifconfig Command
Boot Over the Network Using PXE
Boot Solaris x86 and Linux Systems Over a 10GbE Network
Install the Solaris OS Over a 10GbE Network on SPARC Systems
Configuring the Driver Parameters
Driver Parameters for the Solaris OS
Set ixgbe Driver Parameters in the Solaris OS
Solaris OS Performance Variables
Improve Performance in the Solaris OS
Set Driver Parameters in Linux
Configure Jumbo Frames in Solaris OS
Configure Jumbo Frames in Linux
Configuring Link Aggregation in a Solaris Environment
Display Information About Link Aggregations
Configure Static VLANs in a Solaris Environment
Configure VLANs in a Microsoft Windows Environment
Ensure that the ixgbe module is loaded:
# modprobe ixgbe
Plumb the adapter’s interface:
# ifconfig eth6 xxx.xxx.xx.xxx up
where xxx.xxx.xx.xxx = the IP address of the interface.
Add the VLAN instance (VID).
For example:
# vconfig add eth6 5
where eth6 is the interface and 5 is the VID.
Note - In Linux systems, you can use any single digit as the VID.
Configure the ixgbe VLAN (eth6 in this example):
# ifconfig eth6.5 xxx.xxx.xx.xxx up
where xxx.xxx.xx.xxx = the IP address of the interface.