Remote Management > Administering ILOM (SNMP) > Monitoring ILOM Targets (SNMP) > Verifying Other Aspects (SNMP) |
Documentation, Support, and Training
Understanding ILOM on the Switch
Administering ILOM (Web Interface)
Monitoring ILOM Targets (SNMP)
Display the Date and Time (SNMP)
Display the Aggregate Sensor State (SNMP)
Display the Aggregate Sensor Status (SNMP)
Display the ILOM Event Log (SNMP)
Checking the Status of Services (SNMP)
Display the HTTP Service Status (SNMP)
Display the HTTPS Service Status (SNMP)
Verifying Other Aspects (SNMP)
Display the Alert Properties (SNMP)
Display ILOM User Accounts (SNMP)
Display the Remote Log Hosts (SNMP)
Display the Network Management Configuration (SNMP)
Display the Additional System Component Information (SNMP)
Display the Sensor Entities (SNMP)
Controlling ILOM Targets (SNMP)
Performing General Tasks on ILOM Targets (SNMP)
Clear the ILOM Event Log (SNMP)
Set the Remote Log Hosts (SNMP)
Set the Network Management Parameters (SNMP)
Performing ILOM User Tasks (SNMP)
Add an ILOM User Account (SNMP)
Delete an ILOM User Account (SNMP)
Set the HTTP Service State (SNMP)
Enable Alerts to Send SNMP Traps (SNMP)
The ENTITY-MIB and SUN-PLATFORM-MIB MIBs are used to view system components.
From the SNMP client, display the physical entities:
$ snmpwalk -v2c -c public mc_IP ENTITY-MIB::entPhysicalName ENTITY-MIB::entPhysicalName.1 = STRING: /SYS ENTITY-MIB::entPhysicalName.2 = STRING: /SYS/ShM_CLI ENTITY-MIB::entPhysicalName.3 = STRING: /SYS/CHASSIS_STATUS $
The output contains three entities.
Display the physical entity descriptions:
$ snmpwalk -v2c -c public mc_IP ENTITY-MIB::entPhysicalDescr ENTITY-MIB::entPhysicalDescr.1 = STRING: Sun Datacenter Switch DCS 648 - Chassis ENTITY-MIB::entPhysicalDescr.2 = STRING: Container ENTITY-MIB::entPhysicalDescr.3 = STRING: Fault Sensor $
The output contains descriptions for the three entities.
Display the physical entity classes:
$ snmpwalk -v2c -c public mc_IP ENTITY-MIB::entPhysicalClass ENTITY-MIB::entPhysicalClass.1 = INTEGER: chassis(3) ENTITY-MIB::entPhysicalClass.2 = INTEGER: other(1) ENTITY-MIB::entPhysicalClass.3 = INTEGER: sensor(8) $
The output contains the classes for the three entities.