There are two SAS controller card options for the Sun SPARC Enterprise T5120 and T5220 servers (both options support RAID). The standard option uses the on-board SAS controller card preinstalled on every server. The second option is a StorageTek SAS RAID Internal Host Bus Adapter (HBA) PCIe card. The internal cabling of your server will be different depending on the SAS controller card option you choose.
Figure 124 Hard Drive Data Cable Routing for SAS RAID Controller Card in Eight-Disk Capable Sun SPARC Enterprise T5120 Servers
1 Route the cable between the PCIe slots and FB-DIMMs
2 Route the cable through the cable retainer
3 Route the cable along the power supply midwall
4 78 cm cable routing through the channel on the clear plastic air duct
5 Proper positions of heat-shrink tubing
6 Route the cable through the fan midwall to the hard drive backplane
Note - For information about installing PCIe HBA cards, refer to the document, Installing the StorageTek SAS RAID HBA Into the SPARC Enterprise T5120 and T5220 Servers.