test

System Administration Guide: IP Services

How to Display Interface Address Assignments

You can use the ifconfig command to display all address assignments as well as just IPv4 or IPv6 address assignments.

    On the command line, type the following command.


    % ifconfig [option]

For more information on the ifconfig command, see the ifconfig(1M) man page.

Example—Displaying Addressing Information for All Interfaces


% ifconfig -a
lo0: flags=1000849 mtu 8232 index 1
        inet 120.10.0.1 netmask ff000000 
le0: flags=1000843 mtu 1500 index 2
        inet 120.46.86.54 netmask ffffff00 broadcast 120.146.86.255
        ether 8:0:73:56:a8 
lo0: flags=2000849 mtu 8252 index 1
        inet6 ::1/128 
le0: flags=2000841 mtu 1500 index 2
        ether 8:0:20:56:a8 
        inet6 fe80::a00:fe73:56a8/10 
le0:1: flags=2080841 mtu 1500 index 2
        inet6 fec0::56:20ff:fe73:56a8/64 
le0:2: flags=2080841 mtu 1500 index 2
        inet6 2::56:a00:fe73:56a8/64

Example—Displaying Addressing Information for All IPv4 Interfaces


% ifconfig -a4
lo0: flags=1000849 mtu 8232 index 1
        inet 120.10.0.1 netmask ff000000 
le0: flags=1000843 mtu 1500 index 2
        inet 120.46.86.54 netmask ffffff00 broadcast 120.46.86.255
        ether 8:0:20:56:a8

Example—Displaying Addressing Information for All IPv6 Interfaces


% ifconfig -a6
lo0: flags=2000849 mtu 8252 index 1
        inet6 ::1/128 
le0: flags=2000841 mtu 1500 index 2
        ether 8:0:20:56:a8 
        inet6 fe80::a00:fe73:56a8/10 
le0:1: flags=2080841 mtu 1500 index 2
        inet6 fec0::56:20ff:fe73:56a8/64 
le0:2: flags=2080841 mtu 1500 index 2
        inet6 2::56:a00:fe73:56a8/64