Sun Remote System Control (RSC) 2.2.2 Release Notes
817-3995-11
Contents |
1. Sun Remote System Control (RSC) 2.2.2 Release Notes
Before Installing Sun Remote System Control Software
RSC 2.2.2 Support on Sun Fire V490 and Sun Fire V890 Servers
Removing and Installing the RSC or SC Card
Alert Messages Might Be Delayed
Wrong Information Provided on alerts.html
rsc-console Switches to tip Connection During Boot When diag-switch? Is Set to true
RSC bootmode -u Command Fails to Toggle the Console
Running obdiag in rsc-console Mode Can Cause Unexpected Behaviors
SetSockOpt: Invalid argument Message Received When Maximum Number of Telnet Sessions Is Reached
Disk Errors Are Reported in loghistory While Running SunVTS, But No Errors Are Reported in SunVTS or Solaris
RSC Issues for Sun Fire V490 and Sun Fire V890 Servers
The RSC Console Switches to the Server Console Without Warning When OpenBoot PROM Enhanced Diagnostics Are On or the Control Switch Is in the Diagnostics Position
RSC Issues for Sun Fire 280R, Sun Fire V880, and Sun Fire V480 Servers
False Drive Fault Reported at Power-On
Going From Battery to Standby, the Locator LED Will Turn On in the GUI
RSC Issues for Sun Enterprise 250 Servers
Increased Number of RSC User Accounts Not Supported
Change to the serial_hw_handshake Variable Requires a System Reboot
Power Supply Alerts Display Incorrect Index in the GUI
Sun Remote System Control (RSC) 2.2 User's Guide Update
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.