C H A P T E R 4 |
Known Issues |
This chapter contains the latest supplementary information for the preceding chapters in this guide. There are no known issues with this release.
This chapter contains the following topics:
After swapping between different types of HBAs on a Sun Blade T6300 system, the system might not be able to detect the Sun StorageTek Dual 4 Gb FC Dual GbE HBA.
Workaround - Reboot the system.
In rare circumstances, after a Sun Blade T6300 or T6320 system has gone through several reboots, the Pluggable Express Module (PEM) on the system might not come online. With this PEM offline, the system cannot detect all devices that are connected to the system.
Workaround - Reboot the system again, which enables the PEM service to come back online.
If the Sun Blade X8450 system has an ILOM version prior to 2.0.1.10, the BIOS might not be able to detect the HBA.
Workaround - Upgrade to the ILOM version 2.0.1.10 or later.
The FCode version is not displayed when you use the luxadm fcode -p command.
Workaround - You can verify the FCode version at the ok prompt.
Copyright © 2008, Sun Microsystems, Inc. All Rights Reserved.