show Command - Oracle Integrated Lights Out Manager (ILOM) 3.0 HTML Documentation Collection

Using the -display option determines the type of information shown. If you specify -display targets, then all targets in the namespace below the current target are shown. If you specify -display properties, all property names and values for the target are shown. With this option you can specify certain property names, and only those values are shown. If you specify -display all, all targets in the namespace below the current target are shown, and the properties of the specified target are shown. If you do not specify a -display option, the show command acts as if -display all were specified.

The -level option controls the depth of the show command, and it applies to all modes of the -display option. Specifying -level 1 displays the level of the namespace where the object exists. Values greater than 1 return information for the current target level in the namespace and the <specified value> levels below. If the argument is -level all, it applies to the current level in the namespace and everything below.

The -o|output option specifies the output and form of command output. Oracle ILOM supports only -o table, which displays targets and properties in tabular form.

The alias, show components, is a shortcut for the following CLI command:

-> show -o table -level all /SYS component state

The show components alias produces the same output as the previous command. Thus, it enables you to restrict the table output to a single property below each target.

Syntax

show [options] [-display targets|properties|all] [-level value|all] target [propertyname]

Options

[-d|-display] [-l|level] [-o|output]

Targets and Properties

Table 57 Targets and Properties for show Command

Valid Targets	Properties
`/HOST/tpm`	`activate`
	`enable`
	`forceclear`
`/SYS`	`type`
	`ipmi_name`
	`product_name`
	`product_part_number`
	`product_serial_number`
	`product_manufacturer`
	`fault_state`
	`clear_fault_action`
	`power_state`
`/SYS/DBP/HDDn` where `n` is a valid HDD slot	`type`
	`ipmi_name`
	`fru_name`
	`fru_manufacturer`
	`fru_version`
	`fru_serial_number`
	`controller_id`
	`disk_id`
	`capacity`
	`device_name`
	`disk_type`
	`wwn`
	`raid_status`
	`raid_ids`
`/STORAGE/raid/controller@od:00.0` where `00.0` is the ID for the controller	`fru_manufacturer`
	`fru_model`
	`pci_vendor_id`
	`pci_device_id`
	`pci_subvendor_id`
	`pci_subdevice_id`
	`raid_levels`
	`max_disks`
	`max_raids`
	`max_hot_spares`
	`max_global_hot_spares`
	`min_stripe_size`
	`max_stripe_size`
`/STORAGE/raid/controller@od:00.0/ raid_id0` where `00.0` is the ID for the controller, and `raid_id0` is the target RAID disk	`level`
	`status`
	`disk_capacity`
	`device_name`
	`mounted`
`/STORAGE/raid/controller@od:00.0/ raid_id0/disk_id0` where `00.0` is the ID for the controller, `raid_id0` is the target RAID disk, and `disk_id0` is the target disk	`fru_manufacturer`
	`fru_serial_number`
	`fru_version`
	`status`
	`capacity`
	`device_name`
	`disk_type`
	`wwn`
	`raid_ids`
	`system_drive_slot`
`/SP`	`check_physical_presence`
	`customer_frudata`
	`hostname`
	`reset_to_defaults`
	`system_contact`
	`system_description`
	`system_identifier`
	`system_location`
`/SP/alertmgmt/rules/n` where `n` 1-15	`community\|username`
	`destination`
	`destination_port`
	`event_class_filter`
	`event_type_filter`
	`level`
	`snmp_version`
	`type`
`/SP/cli`	`timeout`
`/SP/clients/ activedirectory`	`state`
	`defaultrole`
	`address`
	`logdetail`
	`port`
	`strictcertmode`
	`timeout`
`/SP/clients/ activedirectory/ admingroups/n` where `n` is 1-5	`name`
`/SP/clients/ activedirectory/ alternateservers/n` where `n` is 1-5	`address`
	`port`
`/SP/clients/ activedirectory/ alternateservers/n/cert` where `n` is 1-5	`clear_action`
	`certstatus`
	`issuer`
	`load_uri`
	`serial_number`
	`subject`
	`valid_from`
	`valid_until`
	`version`
`/SP/clients/ activedirectory/cert`	`certstatus`
	`clear_action`
	`issuer`
	`load_uri`
	`serial_number`
	`subject`
	`valid_from`
	`valid_until`
	`version`
`/SP/clients/ activedirectory/ customgroups/n` where `n` is 1-5	`name`
	`roles`
`/SP/clients/ activedirectory/ opergroups/n` where `n` is 1-5	`name`
`/SP/clients/ activedirectory/ userdomains/n` where `n` is 1-5	`domain`
`/SP/clients/dns`	`auto_dns`
	`nameserver`
	`searchpath`
`/SP/clients/ldap`	`binddn`
	`bindpw`
	`defaultrole`
	`address`
	`port`
	`searchbase`
	`state`
`/SP/clients/ldapssl`	`defaultrole`
	`address`
	`logdetail`
	`port`
	`state`
	`strictcertmode`
	`timeout`
`/SP/clients/ldapssl/ optionalUserMapping`	`state`
`/SP/clients/ ldapssl/ admingroups/n` where `n` is 1-5	`name`
`/SP/clients/ ldapssl/ alternateservers/n` where `n` is 1-5	`address`
`/SP/clients/ ldapssl/ alternateservers/n` where `n` is 1-5	`port`
`/SP/clients/ ldapssl/ alternateservers/n/cert` where `n` is 1-5	`certstatus`
	`clear_action`
	`issuer`
	`load_uri`
	`serial_number`
	`subject`
	`valid_from`
	`valid_until`
	`version`
`/SP/clients/ldapssl/cert`	`certstatus`
	`clear_action`
	`issuer`
	`load_uri`
	`serial_number`
	`subject`
	`valid_from`
	`valid_until`
	`version`
`/SP/clients/ ldapssl/ customgroups/n` where `n` is 1-5	`name`
`/SP/clients/ ldapssl/ customgroups/n` where `n` is 1-5	`roles`
`/SP/clients/ ldapssl/ opergroups/n` where `n` is 1-5	`name`
`/SP/clients/ ldapssl/ userdomains/n` where `n` is 1-5	`domain`
`/SP/clients/ntp/server/[1\|2]`	`address`
`/SP/clients/radius`	`address`
	`port`
	`secret`
	`state`
`/SP/clients/smtp`	`port`
`/SP/clients/smtp`	`state`
`/SP/clock`	`datetime`
	`usentpserver`
	`uptime`
	`timezone`
`/SP/config`	`dump_uri`
	`load_uri`
	`passphrase`
`/SP/console`	`line_count`
	`logging`
	`pause_count`
	`start_from`
`/SP/diag/snapshot`	`dataset`
	`dump_uri`
	`result`
`/SP/firmware`	`load_uri`
`/SP/logs/event`	`clear`
`/SP/network`	`commitpending`
	`dhcp_server_ip`
	`ipaddress`
	`ipdiscovery`
	`ipgateway`
	`ipnetmask`
	`macaddress`
	`pendingipaddress`
	`pendingdiscovery`
	`pendingipgateway`
	`pendingipnetmask`
	`state`
`/SP/network/ipv6`	`state`
	`autoconfig`
	`dhcpv6_server_duid`
	`link_local_ipaddress`
	`static_ipaddress`
	`ipgateway`
	`pending_static_ipaddress`
	`dynamic_ipaddress_1`
`/SP/network/test`	`ping`
`/SP/network/test`	`ping6`
`/SP/powermgmt`	`actual_power`
	`permitted_power`
	`available_power`
`/SP/preferences/banner`	`connect_message`
	`login_message`
	`login_message_acceptance`
`/SP/serial/external`	`flowcontrol`
`/SP/serial/external`	`speed`
`/SP/serial/host`	`commitpending`
	`pendingspeed`
	`speed`
`/SP/services/http`	`port`
	`securedirect`
	`servicestate`
`/SP/services/https`	`port`
`/SP/services/https`	`servicestate`
`/SP/services/https/ssl`	`cert_status`
`/SP/services/https/ssl/default_cert`	`issuer`
	`subject`
	`valid_from`
	`valid_until`
`/SP/services/https/ssl/custom_cert`	`clear_action`
	`issuer`
	`load_uri`
	`subject`
	`valid_from`
	`valid_until`
`/SP/services/https/ssl/custom_key`	`key_present`
	`load_uri`
	`clear_action`
`/SP/services/ipmi`	`servicestate`
`/SP/services/kvms`	`mousemode`
`/SP/services/kvms`	`servicestate`
`/SP/services/servicetag`	`passphrase`
	`servicetag_urn`
	`state`
`/SP/services/snmp`	`engineid`
	`port`
	`sets`
	`v1`
	`v2c`
	`v3`
	`servicestate`
`/SP/services/snmp/communities/private`	`permissions`
`/SP/services/snmp/communities/public`	`permissions`
`/SP/services/snmp/users/username`	`password`
`/SP/services/snmp/users/username`	`role`
`/SP/services/ssh`	`state`
`/SP/services/ssh/keys/dsa`	`fingerprint`
	`length`
	`privatekey`
	`publickey`
`/SP/services/ssh/keys/rsa`	`fingerprint`
	`length`
	`privatekey`
	`publickey`
`/SP/services/sso`	`state`
`/SP/sessions/sessionid`	`username`
	`starttime`
	`type`
	`mode`
`/SP/users/username`	`role`
`/SP/users/username`	`password`
`/SP/users/username/ssh/keys/1`	`fingerprint`
	`algorithm`
	`load_uri`
	`clear_action`
	`embedded_comment`
	`bit_length`
`/SP/users/username/service`	`service_password`
`/SP/users/username/service`	`service_password_expires`
`/SP/users/username/escalation`	`escalation_password`
`/SP/users/username/escalation`	`escalation_password_expires`

Examples

-> show /SP/users/user1

-> show /SP/clients -level2

-> show components

Skip Navigation Links
Exit Print View
	Oracle Integrated Lights Out Manager (ILOM) 3.0 HTML Documentation Collection